All MIBs › HUAWEI-DSLAM-PITP-MIB
Organization: Huawei Technologies Co.,Ltd.
Last Updated: 2012-05-12
Category: Domain: DSL, Vendor: Huawei
Description: Huawei DSLAM PITP (PPPoE Intermediate Agent Tag Protocol) MIB for managing PPPoE access circuit tagging and subscriber identification on DSLAMs.
Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.
What Is HUAWEI-DSLAM-PITP-MIB?
HUAWEI-DSLAM-PITP-MIB is a Huawei private MIB implementing the Policy Information Transfer Protocol (PITP), part of Huawei's Group Management Protocol (HGMP) family, used on DSLAM access nodes to relay subscriber port/circuit information to a Broadband Remote Access Server (BRAS). It exposes objects that bind user accounts to specific access ports, primarily to prevent account theft and unauthorized roaming of subscriber credentials across ports. As a broadband-access policy MIB, its monitoring value is in confirming which physical access port a given subscriber circuit is currently bound to and detecting mismatches that indicate fraudulent access. It depends on the DSLAM's underlying port/interface identification and works alongside PPPoE Intermediate Agent tagging, since PITP information is carried inline with subscriber PPPoE/DHCP sessions. It is deployed on Huawei DSLAM broadband access nodes in fixed-line (xDSL) access networks. Engineers can download the HUAWEI-DSLAM-PITP-MIB file directly to load it into their MIB browser.
IPNetwork Monitor allows you to monitor SNMP objects defined in HUAWEI-DSLAM-PITP-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.
Supported Devices
- Huawei DSLAM broadband access nodes
Monitoring Examples
A network operator would poll the PITP port-binding table to confirm a subscriber's account identifier is bound to the correct physical DSLAM port, then compare it against the BRAS's session records. If a subscriber's traffic arrives tagged with a port binding inconsistent with their provisioned line, that signals possible port hijacking or misconfigured wiring. This MIB is primarily a fraud-prevention and access-policy verification tool rather than a hardware-health monitor.
What Can Be Monitored
- subscriber account-to-port binding
- PITP tag/policy configuration
- port identification information sent to BRAS
This MIB depends on
Related MIBs
Imported Objects
From HUAWEI-ADSL-MIB
| hwAdslLinePvcVci | OBJECT-TYPE |
| hwAdsllinePvcVpi | OBJECT-TYPE |
From HUAWEI-MIB
| huaweiUtility | OBJECT-IDENTITY |
From IF-MIB
| ifIndex | OBJECT-TYPE |
From SNMPv2-SMI
| Integer32 | |
| MODULE-IDENTITY | |
| OBJECT-TYPE | |
| Unsigned32 |
From SNMPv2-TC
| DisplayString | |
| RowStatus | |
| TruthValue |
OIDs
| OID symbolic | OID numeric | Type | Access | Description |
|---|---|---|---|---|
| hwDslamPITP | 1.3.6.1.4.1.2011.6.42 | This MIB module defines Huawei's Policy Information Transfer Protocol (PITP) MIB objects. PITP is a member of the Huawei Group Management Protocol (HGMP) family, and provides the Broadband Remote Access Server (BRAS) with the information about the port of access users. PITP binds user accounts to the access ports together to prevent theft and roaming of user accounts. | ||
| INT hwDslamPITPStatus | 1.3.6.1.4.1.2011.6.42.1 | INTEGER | read-write | Indicates the status of the global PITP switch. Options: 1. disable(1) -indicates the global PITP switch is off 2. enableVmode(2) -indicates the global PITP switch is V mode 3. enablePmode(3) -indicates the global PITP switch is P mode 4. forwardPmode(4) -indicates not processing the vendor tag of the packet, but transparent it transmitted. Only for P mode 5. rebuildPmode(5) -indicates rebuild the vendor tag from the ONU device, to meet the TR-156 needs, only for P mode Default: disable(1) |
| U32 hwDslamPITPVmodeEtherType | 1.3.6.1.4.1.2011.6.42.2 | Unsigned32 | read-write | Indicates the Ethernet protocol type of the PITP VBAS. Range: 1536-65535, that is, 0x600-0xFFFF Default: 33280(0x8200) Restrictions: If the value set to a protocol type is the same as any of other protocol types in the system, the setting fails. |
| INT hwDslamPITPXdslPortRateInfoSwitch | 1.3.6.1.4.1.2011.6.42.3 | INTEGER | read-write | Xdsl port rate information switch, current support Adsl only. Options: 1. disable(1) -indicates the Xdsl port rate information switch is off 2. enable(2) -indicates Xdsl port rate information switch is on Default: disable(1) |
| INT hwDslamPITPCNTelSwitch | 1.3.6.1.4.1.2011.6.42.4 | INTEGER | read-write | Xdsl add BRAS information switch. Options: 1. disable(1) -indicates the Xdsl add BRAS information switch is off 2. enable(2) -indicates Xdsl add BRAS information switch is on Default: disable(1) |
| INT hwDslamPITPTITagSwitch | 1.3.6.1.4.1.2011.6.42.5 | INTEGER | read-write | TI Add Dhcp && PITP Tag information switch Options: 1. disable(1) -indicates the TI Add Dhcp && PITP Tag information switch is off 2. enable(2) -indicates the TI Add Dhcp && PITP Tag information switch is on Default: disable(1) |
| INT hwDslamPITPRAIOMode | 1.3.6.1.4.1.2011.6.42.6 | INTEGER | read-write | Indicates the RAIO mode of PPPoE plus/VBAS. Options: 1. common(1) -indicates the RAIO mode of PPPoE plus/VBAS is common 2. xdslPortRate(2) -indicates the RAIO mode of PPPoE plus/VBAS is Xdsl port rate 3. cntel(3) -indicates the RAIO mode of PPPoE plus/VBAS is Xdsl add BRAS 4. ti(4) -indicates the RAIO mode of PPPoE plus/VBAS is TI Add Dhcp && PITP Tag 5. neuf(5) -indicates the RAIO mode of PPPoE plus/VBAS is neuf 6. portUserLabel(6) -indicates the RAIO mode of PPPoE plus/VBAS is portUserLabel 7. bt(7) -indicates the RAIO mode of PPPoE plus/VBAS is bt 8. servicePortUserLabel(8) -indicates the RAIO mode of PPPoE plus/VBAS is servicePortUserLabel 9. dslForumDefault(9) -indicates the RAIO mode of PPPoE plus/VBAS is dslForumDefault 10. brt(10) -indicates the RAIO mode of PPPoE plus/VBAS is brt 11. userDefined(11) -indicates the RAIO mode of PPPoE plus/VBAS is user defined 12. ft(12) -indicates the RAIO mode of PPPoE plus/VBAS is ft 13. cntelXpon(13) -indicates the RAIO mode of PPPoE plus/VBAS is Xpon add BRAS 14. tm(14) -indicates the RAIO mode of PPPoE plus/VBAS is tm 15. bbf(15) -indicates the RAIO mode of PPPoE plus is bbf 16. vnpt(16) -indicates the RAIO mode of PPPoE plus is vnpt Default: common(1) Restrictions: bt(7) is not supported. The VBAS supports only common(1), cntel(3), and userDefined(11). When this leaf is set to userDefined(11), the specific RAIO format must be configured through hwDslamRAIOFormatTable. |
| INT hwDslamPITPPMODERAIOMode | 1.3.6.1.4.1.2011.6.42.7 | INTEGER | read-write | RAIO(Relay agent info Option) mode of PITP pmode. Options: 1. common(1) -indicates the RAIO mode of PPPoE plus/VBAS is common 2. xdslPortRate(2) -indicates the RAIO mode of PPPoE plus/VBAS is Xdsl port rate 3. cntel(3) -indicates the RAIO mode of PPPoE plus/VBAS is Xdsl add BRAS 4. ti(4) -indicates the RAIO mode of PPPoE plus/VBAS is TI Add Dhcp && PITP Tag 5. neuf(5) -indicates the RAIO mode of PPPoE plus/VBAS is neuf 6. portUserLabel(6) -indicates the RAIO mode of PPPoE plus/VBAS is portUserLabel 7. bt(7) -indicates the RAIO mode of PPPoE plus/VBAS is bt 8. bbf(15) -indicates the RAIO mode of PPPoE plus is bbf Default: common(1) |
| INT hwDslamPITPVMODERAIOMode | 1.3.6.1.4.1.2011.6.42.8 | INTEGER | read-write | RAIO(Relay agent info Option) mode of PITP vmode. Options: 1. common(1) -indicates the RAIO mode of PPPoE plus/VBAS is common 2. cntel(3) -indicates the RAIO mode of PPPoE plus/VBAS is Xdsl add BRAS Default: common(1) |
| INT hwDslamDHCPOPTION82RAIOMode | 1.3.6.1.4.1.2011.6.42.9 | INTEGER | read-write | Indicates the RAIO mode of DHCP Option82. Options: 1. common(1) -indicates the RAIO mode of DHCP Option82 is common 2. xdslPortRate(2) -indicates the RAIO mode of DHCP Option82 is Xdsl port rate 3. cntel(3) -indicates the RAIO mode of DHCP Option82 is Xdsl add BRAS 4. ti(4) -indicates the RAIO mode of DHCP Option82 is TI Add Dhcp && PITP Tag 5. neuf(5) -indicates the RAIO mode of DHCP Option82 is neuf 6. portUserLabel(6) -indicates the RAIO mode of DHCP Option82 is portUserLabel 7. bt(7) -indicates the RAIO mode of DHCP Option82 is bt 8. servicePortUserLabel(8) -indicates the RAIO mode of DHCP Option82 is servicePortUserLabel 9. dslForumDefault(9) -indicates the RAIO mode of DHCP Option82 is dslForumDefault 10. brt(10) -indicates the RAIO mode of DHCP Option82 is brt 11. userDefined(11) -indicates the RAIO mode of DHCP Option82 is user defined 12. ft(12) -indicates the RAIO mode of DHCP Option82 is ft 13. cntelXpon(13) -indicates the RAIO mode of DHCP Option82 is Xpon add BRAS 14. tm(14) -indicates the RAIO mode of DHCP Option82 is tm 15. bbf(15) -indicates the RAIO mode of DHCP Option82 is bbf 16. vnpt(16) -indicates the RAIO mode of DHCP Option82 is vnpt Default: common(1) Restrictions: bt(7) is not supported. When this leaf is set to userDefined(11), the specific RAIO format must be configured through hwDslamRAIOFormatTable. |
| hwDslamRAIOFormatTable | 1.3.6.1.4.1.2011.6.42.10 | not-accessible | Used for querying the RAIO format; supports the setting of only the user-defined mode. The indexes of this table are hwDslamRAIOObject, hwDslamRAIOIdPara, hwDslamRAIOMode and hwDslamRAIOIfType. | |
| hwDslamRAIOFormatEntry | 1.3.6.1.4.1.2011.6.42.10.1 | not-accessible | Used for querying the RAIO format; supports the setting of only the user-defined mode. The indexes of this entry are hwDslamRAIOObject, hwDslamRAIOIdPara, hwDslamRAIOMode and hwDslamRAIOIfType. | |
| INT hwDslamRAIOObject | 1.3.6.1.4.1.2011.6.42.10.1.1 | INTEGER | not-accessible | Indicates the RAIO object. This leaf is an index. Options: 1. pitp(1) -indicates the RAIO object is pitp 2. dhcpOption82(2) -indicates the RAIO object is dhcpOption82 3. ancp(3) -indicates the RAIO object is ancp 4. dhcpv6Option(4) -indicates the RAIO object is dhcpv6Option |
| INT hwDslamRAIOIdPara | 1.3.6.1.4.1.2011.6.42.10.1.2 | INTEGER | not-accessible | Indicates the RAIO ID parameter. This leaf is an index. Options: 1. cid(1) -indicates the RAIO object is cid 2. rid(2) -indicates the RAIO object is rid 3. info(3) -indicates the RAIO object is info |
| INT hwDslamRAIOMode | 1.3.6.1.4.1.2011.6.42.10.1.3 | INTEGER | not-accessible | Indicates the RAIO mode. This leaf is an index. Options: 1. common(1) -indicates the RAIO mode is common 2. xdslPortRate(2) -indicates the RAIO mode is Xdsl port rate 3. cntel(3) -indicates the RAIO mode is Xdsl add BRAS 4. ti(4) -indicates the RAIO mode is TI Add Dhcp && PITP Tag 5. neuf(5) -indicates the RAIO mode is neuf 6. portUserLabel(6) -indicates the RAIO mode is portUserLabel 7. bt(7) -indicates the RAIO mode is bt 8. servicePortUserLabel(8) -indicates the RAIO mode is servicePortUserLabel 9. dslForumDefault(9) -indicates the RAIO mode is dslForumDefault 10. brt(10) -indicates the RAIO mode is brt 11. userDefined(11) -indicates the RAIO mode is user defined 12. ft(12) -indicates the RAIO mode is ft 13. cntelXpon(13) -indicates the RAIO mode is Xpon add BRAS 14. tm(14) -indicates the RAIO mode is tm 15. bbf(15) -indicates the RAIO mode is bbf 16. vnpt(16) -indicates the RAIO mode is vnpt Default: common(1) Restrictions: bt(7) is not supported. The VBAS supports only common(1), cntel(3), and userDefined(11). |
| INT hwDslamRAIOIfType | 1.3.6.1.4.1.2011.6.42.10.1.4 | INTEGER | not-accessible | Indicates the interface type. Options: 1. atm(1) -atm interface type 2. eth(2) -eth interface type 3. xpon(3) -xpon interface type 4. eoc(4) -eoc interface type 5. docsis(5) -docsis interface type For the ATM access mode (the ATM mode of xDSL boards), the value of this leaf is atm(1); for the Ethernet access mode (the PTM mode of the OPFA board and xDSL boards), the value of this leaf is eth(2); for the xPON access mode, the value of this leaf is xpon(3); for the EOC access mode, the value of this leaf is eoc(4); for the docsis access mode, the value of this leaf is docsis(5). |
| OCT hwDslamRAIOFormatString | 1.3.6.1.4.1.2011.6.42.10.1.5 | OCTET STRING | read-write | Indicates the character string of the RAIO format. Range: a string of 0-255 characters. |
| ROW hwDslamRAIORowStatus | 1.3.6.1.4.1.2011.6.42.10.1.6 | RowStatus | read-create | Indicates the row status, used for deleting the RAIO format. Options createAndGo(4) and destroy(6) are supported. Currently, this leaf does not support the create and query operations. To modify the RAIO format, you need not bind the row status. To delete the RAIO format, you must input hwDslamRAIORowStatus. |
| hwDslamPITPPmodePortPvcTable | 1.3.6.1.4.1.2011.6.42.11 | not-accessible | PITP pmode of pvc supported port management table. The indexes of this table are ifIndex, hwAdsllinePvcVpi and hwAdslLinePvcVci. | |
| hwDslamPITPPmodePortPvcEntry | 1.3.6.1.4.1.2011.6.42.11.1 | not-accessible | PITP pmode of pvc supported port management table. The indexes of this entry are ifIndex, hwAdsllinePvcVpi and hwAdslLinePvcVci. | |
| T/F hwDslamPITPPmodePortPvcAdminStatus | 1.3.6.1.4.1.2011.6.42.11.1.1 | TruthValue | read-write | PITP pmode of pvc supported port administer state. Options: true(enable), false(disable),the default Default: false |
| ROW hwDslamPITPPmodePortPvcRowStatus | 1.3.6.1.4.1.2011.6.42.11.1.2 | RowStatus | read-create | Row status. Add or delete a table item. |
| hwDslamPITPPmodePortTable | 1.3.6.1.4.1.2011.6.42.12 | not-accessible | PITP pmode of port management table. The index of this table is ifIndex. | |
| hwDslamPITPPmodePortEntry | 1.3.6.1.4.1.2011.6.42.12.1 | not-accessible | PITP pmode of port management table. The index of this entry is ifIndex. | |
| T/F hwDslamPITPPmodePortAdminStatus | 1.3.6.1.4.1.2011.6.42.12.1.1 | TruthValue | read-write | PITP pmode of port administer state. Options: true(enable), false(disable) Default: false |
| T/F hwDslamPITPPmodePortUplinkStatus | 1.3.6.1.4.1.2011.6.42.12.1.2 | TruthValue | read-write | Up-link administer state. Only a port on main board can be an up-link. Options: true(yes), false(no), Default: true |
| ROW hwDslamPITPPmodePortRowStatus | 1.3.6.1.4.1.2011.6.42.12.1.3 | RowStatus | read-create | Row status. Add or delete a table item. |
| T/F hwDslamPITPPmodeSuboption90Status | 1.3.6.1.4.1.2011.6.42.13 | TruthValue | read-write | Indicates PPPoE plus Suboption90. Options: 1. true(1) -indicates PPPoE plus Suboption90 is enable 2. false(2) -indicates PPPoE plus Suboption90 is disable Default: false(2) Restrictions: The operation on this leaf takes effect in the PPPoE plus mode only. |
| hwDslamPITPPmodeSuboptionTable | 1.3.6.1.4.1.2011.6.42.14 | not-accessible | PITP pmode suboption table. The index of this table is hwDslamPITPPmodeSuboptionIndex. | |
| hwDslamPITPPmodeSuboptionEntry | 1.3.6.1.4.1.2011.6.42.14.1 | not-accessible | PITP pmode suboption table. The index of this entry is hwDslamPITPPmodeSuboptionIndex. | |
| I32 hwDslamPITPPmodeSuboptionIndex | 1.3.6.1.4.1.2011.6.42.14.1.1 | Integer32 | read-only | the index of PITP pmode suboption: -index 1 stand for suboption 0x81; -index 2 stand for suboption 0x82; -index 3 stand for suboption 0x83; -index 4 stand for suboption 0x84; -index 5 stand for suboption 0x85; -index 6 stand for suboption 0x86; -index 7 stand for suboption 0x87; -index 8 stand for suboption 0x88; -index 9 stand for suboption 0x89; -index 10 stand for suboption 0x8a; -index 11 stand for suboption 0x8b; -index 12 stand for suboption 0x8c; -index 13 stand for suboption 0x8d; -index 14 stand for suboption 0x8e; -index 15 stand for suboption 0x90; DEFVAL { 1 } |
| T/F hwDslamPITPPmodeSuboptionStatus | 1.3.6.1.4.1.2011.6.42.14.1.2 | TruthValue | read-write | Configuration of PITP pmode suboption. Options: true(enable), false(disable) Default: false |
| hwDslamRaioSuboptionTable | 1.3.6.1.4.1.2011.6.42.15 | not-accessible | Used for setting and querying RAIO suboptions. The indexes of this table are hwDslamRaioProtocolTypeIndex and hwDslamRaioSuboptionIndex. | |
| hwDslamRaioSuboptionEntry | 1.3.6.1.4.1.2011.6.42.15.1 | not-accessible | Used for setting and querying RAIO suboptions. The indexes of this entry are hwDslamRaioProtocolTypeIndex and hwDslamRaioSuboptionIndex. | |
| I32 hwDslamRaioProtocolTypeIndex | 1.3.6.1.4.1.2011.6.42.15.1.1 | Integer32 | not-accessible | Indicates the protocol type supporting RAIO suboptions. This leaf is an index. Range: 1-255 The value 1 indicates DHCP Option82, 2 indicates PPPoE plus, and 3-255 are reserved. |
| I32 hwDslamRaioSuboptionIndex | 1.3.6.1.4.1.2011.6.42.15.1.2 | Integer32 | not-accessible | Indicates the RAIO suboption. This leaf is an index. Range: 1-255 1-17 correspond to suboptions 0x81-0x91. |
| INT hwDslamRaioSuboptionStatus | 1.3.6.1.4.1.2011.6.42.15.1.3 | INTEGER | read-write | Indicates the status of the RAIO suboption. Options: 1. enable(1) -indicates the RAIO suboption is enable 2. disable(2) -indicates the RAIO suboption is disable Default: disable(2) |
| OCT hwDslamAccessNodeId | 1.3.6.1.4.1.2011.6.42.16 | OCTET STRING | read-write | Indicates the ANID. Range: a string of 0-50 characters Restrictions: This leaf does not support the create operation, and supports only the modify and query operations. To cancel the settings of the ANID, you can directly perform the set operation without inputting a leaf value. |
| I32 hwDslamAccessNodeIp | 1.3.6.1.4.1.2011.6.42.17 | Integer32 | read-write | Indicates the L3 interface in the ANIP field. Currently, the device management IP address is used as the device identifier. The value of the device management IP address is obtained through the VLAN L3 interface specified by hwDslamAccessNodeIp. Range: 0-4294967295 Restrictions: This leaf does not support the create operation, and supports only the modify and query operations. To cancel the settings of the ANIP, input leaf value 4294967295 (equaling 0xFFFFFFFF) and perform the set operation. |
| INT hwDslamAncpRAIOMode | 1.3.6.1.4.1.2011.6.42.18 | INTEGER | read-write | RAIO(Relay agent info Option) mode of ANCP. Options: 1. common(1) -indicates the RAIO mode of ANCP is common 2. xdslPortRate(2) -indicates the RAIO mode of ANCP is Xdsl port rate 3. cntel(3) -indicates the RAIO mode of ANCP is Xdsl add BRAS 4. ti(4) -indicates the RAIO mode of ANCP is TI Add Dhcp && PITP Tag 5. neuf(5) -indicates the RAIO mode of ANCP is neuf 6. portUserLabel(6) -indicates the RAIO mode of ANCP is portUserLabel 7. bt(7) -indicates the RAIO mode of ANCP is bt 8. servicePortUserLabel(8) -indicates the RAIO mode of ANCP is servicePortUserLabel 9. dslForumDefault(9) -indicates the RAIO mode of ANCP is dslForumDefault 10. brt(10) -indicates the RAIO mode of ANCP is brt 11. userDefined(11) -indicates the RAIO mode of ANCP is user defined 12. ft(12) -indicates the RAIO mode of ANCP is ft 13. cntelXpon(13) -indicates the RAIO mode of ANCP is Xpon add BRAS 14. tm(14) -indicates the RAIO mode of ANCP is tm 15. bbf(15) -indicates the RAIO mode of ANCP is bbf 16. vnpt(16) -indicates the RAIO mode of ANCP is vnpt Default: dslForumDefault(9) |
| INT hwDslamDHCPv6OPTIONRAIOMode | 1.3.6.1.4.1.2011.6.42.19 | INTEGER | read-write | Indicates the RAIO mode of DHCPv6 Option. Options: 1. common(1) -indicates the RAIO mode of DHCPv6 option is common 2. xdslPortRate(2) -indicates the RAIO mode of DHCPv6 option is Xdsl port rate 3. cntel(3) -indicates the RAIO mode of DHCPv6 option is Xdsl add BRAS 4. ti(4) -indicates the RAIO mode of DHCPv6 option is TI Add Dhcp && PITP Tag 5. neuf(5) -indicates the RAIO mode of DHCPv6 option is neuf 6. portUserLabel(6) -indicates the RAIO mode of DHCPv6 option is portUserLabel 7. bt(7) -indicates the RAIO mode of DHCPv6 option is bt 8. servicePortUserLabel(8) -indicates the RAIO mode of DHCPv6 option is servicePortUserLabel 9. dslForumDefault(9) -indicates the RAIO mode of DHCPv6 option is dslForumDefault 10. brt(10) -indicates the RAIO mode of DHCPv6 option is brt 11. userDefined(11) -indicates the RAIO mode of DHCPv6 option is user defined 12. ft(12) -indicates the RAIO mode of DHCPv6 option is ft 13. cntelXpon(13) -indicates the RAIO mode of DHCPv6 option is Xpon add BRAS 14. tm(14) -indicates the RAIO mode of DHCPv6 option is tm 15. bbf(15) -indicates the RAIO mode of DHCPv6 option is bbf 16. vnpt(16) -indicates the RAIO mode of DHCPv6 option is vnpt Default: common(1) Restrictions: bt(7) is not supported. When this leaf is set to userDefined(11), the specific RAIO format must be configured through hwDslamRAIOFormatTable. |
| U32 hwDslamRAIODhcpv6Option37EnterpriseNumber | 1.3.6.1.4.1.2011.6.42.20 | Unsigned32 | read-write | Indicates the enterprise number which is used in DHCPv6 option 37. Range: 0-4294967295 DEFVAL {2011} |
| hwDslamRaioProfileTable | 1.3.6.1.4.1.2011.6.42.21 | not-accessible | Used for creating, setting and querying RAIO profiles. The index of this table is hwDslamRaioProfileName. | |
| hwDslamRaioProfileEntry | 1.3.6.1.4.1.2011.6.42.21.1 | not-accessible | Used for creating, setting and querying RAIO profiles. The index of this entry is hwDslamRaioProfileName. | |
| OCT hwDslamRaioProfileName | 1.3.6.1.4.1.2011.6.42.21.1.1 | OCTET STRING | not-accessible | RAIO profile name. Range: a string of 1-32 characters |
| INT hwDslamRaioProfileAccessNodeIpIfType | 1.3.6.1.4.1.2011.6.42.21.1.2 | INTEGER | read-write | Indicates the interface type. Options: 1. notConfiged(1) -indicates that no source interface is configured 2. meth(2) -indicates the MEth interface 3. loopback(3) -indicates the loopback interface 4. vlanif(4) -indicates the VLAN interface When this leaf is set to notConfiged(1), it means that no source interface is configured in the case of the create operation, and that the source interface is deleted in the case of the modify operation. |
| I32 hwDslamRaioProfileAccessNodeIpIfNumber | 1.3.6.1.4.1.2011.6.42.21.1.3 | Integer32 | read-write | Indicates the interface ID. Range: 0-4093 Range for the MEth interface: 0 Range for the loopback interface: 0-31 Range for the VLAN interface: 1-4093 The interface ID and interface type together identify an interface. |
| INT hwDslamRaioProfilePitpRaioMode | 1.3.6.1.4.1.2011.6.42.21.1.4 | INTEGER | read-write | Indicates the RAIO mode. This leaf is an index. Options: 1. common(1) -indicates the RAIO mode of PPPoE plus/VBAS is common 2. xdslPortRate(2) -indicates the RAIO mode of PPPoE plus/VBAS is Xdsl port rate 3. cntel(3) -indicates the RAIO mode of PPPoE plus/VBAS is Xdsl add BRAS 4. ti(4) -indicates the RAIO mode of PPPoE plus/VBAS is TI Add Dhcp && PITP Tag 5. neuf(5) -indicates the RAIO mode of PPPoE plus/VBAS is neuf 6. portUserLabel(6) -indicates the RAIO mode of PPPoE plus/VBAS is portUserLabel 7. bt(7) -indicates the RAIO mode of PPPoE plus/VBAS is bt 8. servicePortUserLabel(8) -indicates the RAIO mode of PPPoE plus/VBAS is servicePortUserLabel 9. dslForumDefault(9) -indicates the RAIO mode of PPPoE plus/VBAS is dslForumDefault 10. brt(10) -indicates the RAIO mode of PPPoE plus/VBAS is brt 11. userDefined(11) -indicates the RAIO mode of PPPoE plus/VBAS is user defined 12. ft(12) -indicates the RAIO mode of PPPoE plus/VBAS is ft 13. cntelXpon(13) -indicates the RAIO mode of PPPoE plus/VBAS is Xpon add BRAS 14. tm(14) -indicates the RAIO mode of PPPoE plus/VBAS is tm 15. bbf(15) -indicates the RAIO mode of PPPoE plus/VBAS is bbf 16. vnpt(16) -indicates the RAIO mode of PPPoE plus/VBAS is vnpt Default: common(1) Restrictions: bt(7) is not supported. The VBAS supports only common(1), cntel(3), and userDefined(11). |
| INT hwDslamRaioProfileDhcpOption82RaioMode | 1.3.6.1.4.1.2011.6.42.21.1.5 | INTEGER | read-write | Indicates the RAIO mode. This leaf is an index. Options: 1. common(1) -indicates the RAIO mode of DHCP Option82 is common 2. xdslPortRate(2) -indicates the RAIO mode of DHCP Option82 is Xdsl port rate 3. cntel(3) -indicates the RAIO mode of DHCP Option82 is Xdsl add BRAS 4. ti(4) -indicates the RAIO mode of DHCP Option82 is TI Add Dhcp && PITP Tag 5. neuf(5) -indicates the RAIO mode of DHCP Option82 is neuf 6. portUserLabel(6) -indicates the RAIO mode of DHCP Option82 is portUserLabel 7. bt(7) -indicates the RAIO mode of DHCP Option82 is bt 8. servicePortUserLabel(8) -indicates the RAIO mode of DHCP Option82 is servicePortUserLabel 9. dslForumDefault(9) -indicates the RAIO mode of DHCP Option82 is dslForumDefault 10. brt(10) -indicates the RAIO mode of DHCP Option82 is brt 11. userDefined(11) -indicates the RAIO mode of DHCP Option82 is user defined 12. ft(12) -indicates the RAIO mode of DHCP Option82 is ft 13. cntelXpon(13) -indicates the RAIO mode of DHCP Option82 is Xpon add BRAS 14. tm(14) -indicates the RAIO mode of DHCP Option82 is tm 15. bbf(15) -indicates the RAIO mode of DHCP Option82 is bbf 16. vnpt(16) -indicates the RAIO mode of DHCP Option82 is vnpt Default: common(1) Restrictions: bt(7) is not supported. |
| INT hwDslamRaioProfileAncpRaioMode | 1.3.6.1.4.1.2011.6.42.21.1.6 | INTEGER | read-write | Indicates the RAIO mode. This leaf is an index. Options: 1. common(1) -indicates the RAIO mode of ANCP is common 2. xdslPortRate(2) -indicates the RAIO mode of ANCP is Xdsl port rate 3. cntel(3) -indicates the RAIO mode of ANCP is Xdsl add BRAS 4. ti(4) -indicates the RAIO mode of ANCP is TI Add Dhcp && PITP Tag 5. neuf(5) -indicates the RAIO mode of ANCP is neuf 6. portUserLabel(6) -indicates the RAIO mode of ANCP is portUserLabel 7. bt(7) -indicates the RAIO mode of ANCP is bt 8. servicePortUserLabel(8) -indicates the RAIO mode of ANCP is servicePortUserLabel 9. dslForumDefault(9) -indicates the RAIO mode of ANCP is dslForumDefault 10. brt(10) -indicates the RAIO mode of ANCP is brt 11. userDefined(11) -indicates the RAIO mode of ANCP is user defined 12. ft(12) -indicates the RAIO mode of ANCP is ft 13. cntelXpon(13) -indicates the RAIO mode of ANCP is Xpon add BRAS 14. tm(14) -indicates the RAIO mode of ANCP is tm 15. bbf(15) -indicates the RAIO mode of ANCP is bbf 16. vnpt(16) -indicates the RAIO mode of ANCP is vnpt Default: dslForumDefault(9) Restrictions: bt(7) is not supported. |
| INT hwDslamRaioProfileDhcpv6OptionRaioMode | 1.3.6.1.4.1.2011.6.42.21.1.7 | INTEGER | read-write | Indicates the RAIO mode. This leaf is an index. Options: 1. common(1) -indicates the RAIO mode of DHCPv6 is common 2. xdslPortRate(2) -indicates the RAIO mode of DHCPv6 is Xdsl port rate 3. cntel(3) -indicates the RAIO mode of DHCPv6 is Xdsl add BRAS 4. ti(4) -indicates the RAIO mode of DHCPv6 is TI Add Dhcp && PITP Tag 5. neuf(5) -indicates the RAIO mode of DHCPv6 is neuf 6. portUserLabel(6) -indicates the RAIO mode of DHCPv6 is portUserLabel 7. bt(7) -indicates the RAIO mode of DHCPv6 is bt 8. servicePortUserLabel(8) -indicates the RAIO mode of DHCPv6 is servicePortUserLabel 9. dslForumDefault(9) -indicates the RAIO mode of DHCPv6 is dslForumDefault 10. brt(10) -indicates the RAIO mode of DHCPv6 is brt 11. userDefined(11) -indicates the RAIO mode of DHCPv6 is user defined 12. ft(12) -indicates the RAIO mode of DHCPv6 is ft 13. cntelXpon(13) -indicates the RAIO mode of DHCPv6 is Xpon add BRAS 14. tm(14) -indicates the RAIO mode of DHCPv6 is tm 15. bbf(15) -indicates the RAIO mode of DHCPv6 is bbf 16. vnpt(16) -indicates the RAIO mode of DHCPv6 is vnpt Default: common(1) Restrictions: bt(7) is not supported. |
| U32 hwDslamRaioProfileDhcpv6Option37EnterpriseNumber | 1.3.6.1.4.1.2011.6.42.21.1.8 | Unsigned32 | read-write | Indicates the enterprise number which is used in DHCPv6 option 37. Range: 0-4294967295 |
| OCT hwDslamRaioProfileAccessNodeId | 1.3.6.1.4.1.2011.6.42.21.1.9 | OCTET STRING | read-write | Indicates the ANID. Range: a string of 0-50 characters Restrictions: |
| ROW hwDslamRaioProfileRowStatus | 1.3.6.1.4.1.2011.6.42.21.1.10 | RowStatus | read-create | Indicates the row status, used for creating and deleting the RAIO profile. Options createAndGo(4) and destroy(6) are supported. Currently, to modify the RAIO profile, you need not bind the row status. To delete the RAIO profile, you must input hwDslamRaioProfileRowStatus. |
| hwDslamRaioProfileSuboptionTable | 1.3.6.1.4.1.2011.6.42.22 | not-accessible | Used for setting and querying the RAIO suboption state of the RAIO profile. The indexes of this table are hwDslamRaioProfileName, hwDslamRaioProtocolTypeIndex and hwDslamRaioSuboptionIndex. | |
| hwDslamRaioProfileSuboptionEntry | 1.3.6.1.4.1.2011.6.42.22.1 | not-accessible | Used for setting and querying the RAIO suboption state of the RAIO profile. The indexes of this entry are hwDslamRaioProfileName, hwDslamRaioProtocolTypeIndex and hwDslamRaioSuboptionIndex. | |
| INT hwDslamRaioProfileSuboptionStatus | 1.3.6.1.4.1.2011.6.42.22.1.1 | INTEGER | read-write | Indicates the status of the RAIO suboption. Options: 1. enable(1) -indicates the RAIO suboption is enable 2. disable(2) -indicates the RAIO suboption is disable Default: disable(2) |
| hwDslamRaioProfileFormatTable | 1.3.6.1.4.1.2011.6.42.23 | not-accessible | Used for querying the RAIO format of the RAIO profile; supports the setting of only the user-defined mode. The indexes of this table are hwDslamRaioProfileName, hwDslamRAIOObject, hwDslamRAIOIdPara, hwDslamRAIOMode, and hwDslamRAIOIfType. | |
| hwDslamRaioProfileFormatEntry | 1.3.6.1.4.1.2011.6.42.23.1 | not-accessible | Used for querying the RAIO format of the RAIO profile; supports the setting of only the user-defined mode. The indexes of this entry are hwDslamRaioProfileName, hwDslamRAIOObject, hwDslamRAIOIdPara, hwDslamRAIOMode, and hwDslamRAIOIfType. | |
| OCT hwDslamRaioProfileFormatString | 1.3.6.1.4.1.2011.6.42.23.1.1 | OCTET STRING | read-write | Indicates the character string of the RAIO format. Range: a string of 0-255 characters. |
| hwDslamPppoeFlowStatisticsTable | 1.3.6.1.4.1.2011.6.42.24 | not-accessible | Used for querying and resetting the pppoeplus statistics on flow. The index of this table is hwDslamPppoeFlowStatisticsIndex. Statistics for a maximum of 64 service ports are supported. | |
| hwDslamPppoeFlowStatisticsEntry | 1.3.6.1.4.1.2011.6.42.24.1 | not-accessible | Used for querying and resetting the pppoeplus statistics on flow. The index of this entry is hwDslamPppoeFlowStatisticsIndex. Statistics for a maximum of 64 service ports are supported. | |
| U32 hwDslamPppoeFlowStatisticsIndex | 1.3.6.1.4.1.2011.6.42.24.1.1 | Unsigned32 | not-accessible | The index of the PPPoE statistics on flow. |
| ROW hwDslamPppoeFlowStatisticsRowStatus | 1.3.6.1.4.1.2011.6.42.24.1.2 | RowStatus | read-write | The present operation status of the row. CreateAndGo(4) means enable the PPPoE statistics on flow. Destroy(6) means disable the PPPoE statistics on flow. Active(1) will be returned in the get operation. |
| INT hwDslamPppoeFlowStatisticsOperMode | 1.3.6.1.4.1.2011.6.42.24.1.3 | INTEGER | read-write | Indicates reset the PPPoE statistics on flow. Options: 1. reset(1) -In the set operation, reset the PPPoE statistics on flow. 2. invalid(2) -In the get operation, the invalid value 2 is returned. Default: invalid(2) |
| U32 hwDslamPppoeFlowStatisticsReceivePadi | 1.3.6.1.4.1.2011.6.42.24.1.4 | Unsigned32 | read-only | Number of received PADI packets. |
| U32 hwDslamPppoeFlowStatisticsReceivePado | 1.3.6.1.4.1.2011.6.42.24.1.5 | Unsigned32 | read-only | Number of received PADO packets. |
| U32 hwDslamPppoeFlowStatisticsReceivePadr | 1.3.6.1.4.1.2011.6.42.24.1.6 | Unsigned32 | read-only | Number of received PADR packets. |
| U32 hwDslamPppoeFlowStatisticsReceivePads | 1.3.6.1.4.1.2011.6.42.24.1.7 | Unsigned32 | read-only | Number of received PADS packets. |
| U32 hwDslamPppoeFlowStatisticsReceivePadt | 1.3.6.1.4.1.2011.6.42.24.1.8 | Unsigned32 | read-only | Number of received PADT packets. |
| U32 hwDslamPppoeFlowStatisticsSendPadi | 1.3.6.1.4.1.2011.6.42.24.1.9 | Unsigned32 | read-only | Number of sent PADI packets. |
| U32 hwDslamPppoeFlowStatisticsSendPado | 1.3.6.1.4.1.2011.6.42.24.1.10 | Unsigned32 | read-only | Number of sent PADO packets. |
| U32 hwDslamPppoeFlowStatisticsSendPadr | 1.3.6.1.4.1.2011.6.42.24.1.11 | Unsigned32 | read-only | Number of sent PADR packets. |
| U32 hwDslamPppoeFlowStatisticsSendPads | 1.3.6.1.4.1.2011.6.42.24.1.12 | Unsigned32 | read-only | Number of sent PADS packets. |
| U32 hwDslamPppoeFlowStatisticsSendPadt | 1.3.6.1.4.1.2011.6.42.24.1.13 | Unsigned32 | read-only | Number of sent PADT packets. |
| U32 hwDslamPppoeFlowStatisticsTagTooLong | 1.3.6.1.4.1.2011.6.42.24.1.14 | Unsigned32 | read-only | Number of packets exceed the maximum tag size. |
| U32 hwDslamPppoeFlowStatisticsFrameTooLong | 1.3.6.1.4.1.2011.6.42.24.1.15 | Unsigned32 | read-only | Number of packets exceed the maximum packet size. |
| U32 hwDslamPppoeFlowStatisticsReceiveUntrusted | 1.3.6.1.4.1.2011.6.42.24.1.16 | Unsigned32 | read-only | Number of received packets with untrusted tag. |
| U32 hwDslamPppoeFlowStatisticsReceiveUnknownType | 1.3.6.1.4.1.2011.6.42.24.1.17 | Unsigned32 | read-only | Number of received packets with unknown type. |
| INT hwDslamPppoeReverse | 1.3.6.1.4.1.2011.6.42.25 | INTEGER | read-write | Indicates the status of the global reverse PPPoE packets switch. Options: 1. enable(1) -indicates the reverse PPPoE packets are forwarded 2. disable(2) -indicates the reverse PPPoE packets are dropped Default: disable(2) |
RFC description
Vendor-private MIB for Huawei DSLAM (Digital Subscriber Line Access Multiplexer) PITP management.
Start monitoring Huawei DSLAMs with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.