All MIBs › HUAWEI-DSLAM-AAA-MIB
Organization: Huawei Technologies Co.,Ltd.
Last Updated: 2011-08-16
Category: Domain: DSL, RADIUS and AAA, Vendor: Huawei
Description: Huawei DSLAM AAA MIB providing authentication, authorization, and accounting management objects for subscriber access on Huawei DSLAM platforms.
Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.
What Is HUAWEI-DSLAM-AAA-MIB?
This is a Huawei private MIB providing Authentication, Authorization, and Accounting (AAA) management objects for subscriber access control on Huawei DSLAM (Digital Subscriber Line Access Multiplexer) platforms. Without sample objects available, it is expected—based on its module description—to expose configuration for AAA server addresses/ports, shared secrets, authentication method selection, and possibly accounting record/session status for subscriber sessions. Its monitoring value centers on subscriber access security and accounting software state—confirming AAA servers are reachable and correctly configured, and tracking authentication/accounting activity for broadband subscribers—rather than hardware sensor data. It implicitly depends on standard RADIUS/TACACS+ AAA protocol concepts, though it is Huawei's private implementation rather than a standards-based MIB. It would be deployed on Huawei DSLAM equipment in broadband access networks where subscriber authentication and usage accounting are required, and HUAWEI-DSLAM-AAA-MIB SNMP monitoring helps confirm AAA servers stay reachable and correctly configured.
IPNetwork Monitor allows you to monitor SNMP objects defined in HUAWEI-DSLAM-AAA-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.
Supported Devices
- Huawei DSLAM (Digital Subscriber Line Access Multiplexer)
Monitoring Examples
No sample objects were provided for this MIB, so specific object names cannot be cited directly; based on its stated purpose, an operator would typically poll AAA server configuration objects to confirm the correct RADIUS/TACACS+ server addresses and shared secrets are configured, and check accounting-related objects to verify subscriber sessions are being properly authenticated and accounted for. A misconfigured or unreachable AAA server would manifest as subscribers failing to authenticate or accounting records not being generated. Confirming exact object names would require consulting the actual MIB source.
What Can Be Monitored
- AAA server configuration
- subscriber authentication status
- accounting/session activity
This MIB depends on
Related MIBs
Imported Objects
From HUAWEI-MIB
| huaweiMgmt | OBJECT-IDENTITY |
From SNMPv2-SMI
| Counter64 | |
| Integer32 | |
| IpAddress | |
| MODULE-IDENTITY | |
| NOTIFICATION-TYPE | |
| OBJECT-TYPE | |
| Unsigned32 |
From SNMPv2-TC
| DateAndTime | |
| DisplayString | |
| MacAddress | |
| RowStatus | |
| TruthValue |
OIDs
| OID symbolic | OID numeric | Type | Access | Description |
|---|---|---|---|---|
| hwDslamAaa | 1.3.6.1.4.1.2011.5.109 | The MIB file is for management of AAA module on DSLAM. AAA, Authentication, Authorization and Accounting is a network security mechanism, which provides a framework for unified authentication, authorization and accounting configurations. | ||
| hwAAAMibObjects | 1.3.6.1.4.1.2011.5.109.1 | |||
| hwAuthenSchemeTable | 1.3.6.1.4.1.2011.5.109.1.1 | not-accessible | Authentication scheme table. It is used to configure authentication scheme. The index of this table is hwAuthenSchemeName. | |
| hwAuthenSchemeEntry | 1.3.6.1.4.1.2011.5.109.1.1.1 | not-accessible | Authentication scheme table. It is used to configure authentication scheme. The index of this entry is hwAuthenSchemeName. | |
| OCT hwAuthenSchemeName | 1.3.6.1.4.1.2011.5.109.1.1.1.1 | OCTET STRING | not-accessible | The index of the hwAuthenSchemeTable. This object indicates authentication scheme name. |
| INT hwAuthenMethod1 | 1.3.6.1.4.1.2011.5.109.1.1.1.2 | INTEGER | read-create | The first priority of authentication mode. Options: 1. local(1) -Indicates that the system authenticates users through the local mode. 2. radius(2) -Indicates that the system authenticates users through the RADIUS protocol. 3. tacacs(3) -Indicates that the system authenticates users through the HWTACACS protocol. |
| ROW hwAuthenRowStatus | 1.3.6.1.4.1.2011.5.109.1.1.1.3 | RowStatus | read-create | Row admin status, only support CreateAndGo(4),Destory(6),Active(1). Options: 1. active(1) -indicates query operation 2. createAndGo(4) -indicates creating operation 3. destroy(6) -indicates deleting operation |
| INT hwAuthenFailPolicy | 1.3.6.1.4.1.2011.5.109.1.1.1.4 | INTEGER | read-create | Authentication fail policy, it's not supported. Options: 1. online(1) -indicates that the user is online when the authorization fails. 2. offline(2) -indicates that the user is offline when the authorization fails. |
| OCT hwAuthenFailDomain | 1.3.6.1.4.1.2011.5.109.1.1.1.5 | OCTET STRING | read-create | Authentication fail domain, it's not supported. |
| INT hwAuthenMethod2 | 1.3.6.1.4.1.2011.5.109.1.1.1.6 | INTEGER | read-create | The second priority of authentication mode. Options: 1. local(1) -Indicates that the system authenticates users through the local mode. 2. radius(2) -Indicates that the system authenticates users through the RADIUS protocol. 3. tacacs(3) -Indicates that the system authenticates users through the HWTACACS protocol. 4. none(4) -Indicates that authentication is not required. 5. notconfiged(6) -Indicates that authentication is not configured. |
| INT hwAuthenMethod3 | 1.3.6.1.4.1.2011.5.109.1.1.1.7 | INTEGER | read-create | The third priority of authentication mode. Options: 1. local(1) -Indicates that the system authenticates users through the local mode. 2. radius(2) -Indicates that the system authenticates users through the RADIUS protocol. 3. tacacs(3) -Indicates that the system authenticates users through the HWTACACS protocol. 4. none(4) -Indicates that authentication is not required. 5. notconfiged(6) -Indicates that authentication is not configured. |
| INT hwAuthenMethod4 | 1.3.6.1.4.1.2011.5.109.1.1.1.8 | INTEGER | read-create | The fourth priority of authentication mode. Options: 1. local(1) -Indicates that the system authenticates users through the local mode. 2. radius(2) -Indicates that the system authenticates users through the RADIUS protocol. 3. tacacs(3) -Indicates that the system authenticates users through the HWTACACS protocol. 4. none(4) -Indicates that authentication is not required. 5. notconfiged(6) -Indicates that authentication is not configured. |
| hwAcctSchemeTable | 1.3.6.1.4.1.2011.5.109.1.2 | not-accessible | Account scheme table. The index of this table is hwAcctSchemeName. | |
| hwAcctSchemeEntry | 1.3.6.1.4.1.2011.5.109.1.2.1 | not-accessible | Account scheme table. The index of this entry is hwAcctSchemeName. | |
| OCT hwAcctSchemeName | 1.3.6.1.4.1.2011.5.109.1.2.1.1 | OCTET STRING | not-accessible | Account scheme name, The index of the hwAcctSchemeTable, This object indicates accounting scheme name. |
| INT hwAccMethod | 1.3.6.1.4.1.2011.5.109.1.2.1.2 | INTEGER | read-create | Accounting scheme mode. Options: 1. noacct(2) -Indicates that the accounting is not implemented. In such a case, accounting is not implemented for users. 2. radius(3) -Uses the RADIUS protocol to implement the accounting for users. 3. hwtacacs(5) -Uses the HWTACACS protocol to implement the accounting for users. |
| INT hwAcctStartFail | 1.3.6.1.4.1.2011.5.109.1.2.1.3 | INTEGER | read-create | The scheme would be used when accounting scheme starts failed. Options: 1. none(1) -ignoring the failure. 2. offline(2) -forcing the user offline. 3. radiusNone(3) -This value is not supported. 4. radiusOfflline(4) -This value is not supported. 5. localnone(5) -This value is not supported. 6. localOffline(6) -This value is not supported. It's not supported. |
| INT hwAcctOnlineFail | 1.3.6.1.4.1.2011.5.109.1.2.1.4 | INTEGER | read-create | The scheme would be used when accounting realtime starts failed. Options: 1. none(1) -ignoring the failure. 2. offline(2) -forcing the user offline. 3. radiusNone(3) -This value is not supported. 4. radiusOfflline(4) -This value is not supported. 5. localnone(5) -This value is not supported. 6. localOffline(6) -This value is not supported. It's not supported. |
| I32 hwAccRealTimeInter | 1.3.6.1.4.1.2011.5.109.1.2.1.5 | Integer32 | read-create | The interval of realtime account. |
| ROW hwAcctRowStatus | 1.3.6.1.4.1.2011.5.109.1.2.1.6 | RowStatus | read-create | Row admin status, only support CreateAndGo(4),Destory(6),Active(1). Options: 1. active(1) -indicates query operation. 2. createAndGo(4) -indicates creating operation. 3. destroy(6) -indicates deleting operation. |
| hwDomainTable | 1.3.6.1.4.1.2011.5.109.1.4 | not-accessible | It is used to configure the domain which belongs to users. Base on a domain, every ISP can use different authentication-scheme, accounting-scheme, and so on. The index of this table is hwDomainName. | |
| hwDomainEntry | 1.3.6.1.4.1.2011.5.109.1.4.1 | not-accessible | It is used to configure the domain which belongs to users. Base on a domain, every ISP can use different authentication-scheme, accounting-scheme, and so on. The index of this entry is hwDomainName. | |
| OCT hwDomainName | 1.3.6.1.4.1.2011.5.109.1.4.1.1 | OCTET STRING | not-accessible | The index of the table, indicates the name of Domain. |
| OCT hwDomainAuthenSchemeName | 1.3.6.1.4.1.2011.5.109.1.4.1.2 | OCTET STRING | read-create | The name of authentication scheme. |
| OCT hwDomainAcctSchemeName | 1.3.6.1.4.1.2011.5.109.1.4.1.3 | OCTET STRING | read-create | The name of accounting Scheme. |
| OCT hwDomainRadiusGroupName | 1.3.6.1.4.1.2011.5.109.1.4.1.4 | OCTET STRING | read-create | Group name of hwRadiusGroupTable table. |
| ROW hwDomainRowStatus | 1.3.6.1.4.1.2011.5.109.1.4.1.11 | RowStatus | read-create | Row admin status, only support CreateAndGo(4),Destory(6),Active(1). Options: 1. active(1) -indicates query operation 2. createAndGo(4) -indicates creating operation 3. destroy(6) -indicates deleting operation |
| hwDomainExtTable | 1.3.6.1.4.1.2011.5.109.1.5 | not-accessible | The domain extend table which is an extended table of hwDomainTable contains some new server properties haven't any standard. The index of this table is hwDomainName. | |
| hwDomainExtEntry | 1.3.6.1.4.1.2011.5.109.1.5.1 | not-accessible | The domain extend table which is an extended table of hwDomainTable contains some new server properties haven't any standard. The index of this entry is hwDomainName. | |
| I32 hwDot1xTemplate | 1.3.6.1.4.1.2011.5.109.1.5.1.22 | Integer32 | read-write | The 802.1x template of the domain, this node is not supported by MXU products. |
| I32 hwAdminUserPriority | 1.3.6.1.4.1.2011.5.109.1.5.1.36 | Integer32 | read-write | Priority of admin user, this node is not supported |
| hwDomainStatTable | 1.3.6.1.4.1.2011.5.109.1.6 | not-accessible | Domain statistic table. The index of this table is hwDomainName. | |
| hwDomainStatEntry | 1.3.6.1.4.1.2011.5.109.1.6.1 | not-accessible | Domain statistic table. The index of this entry is hwDomainName. | |
| I32 hwDomainAccessedNum | 1.3.6.1.4.1.2011.5.109.1.6.1.1 | Integer32 | read-only | Accessed Number |
| I32 hwDomainOnlineNum | 1.3.6.1.4.1.2011.5.109.1.6.1.2 | Integer32 | read-only | Online number |
| I32 hwDomainOnlinePPPUser | 1.3.6.1.4.1.2011.5.109.1.6.1.3 | Integer32 | read-only | Online PPP user number |
| C64 hwDomainFlowDnByte | 1.3.6.1.4.1.2011.5.109.1.6.1.4 | Counter64 | read-only | The byte number of a flow on down direction. |
| C64 hwDomainFlowDnPkt | 1.3.6.1.4.1.2011.5.109.1.6.1.5 | Counter64 | read-only | The packet number of flow on down direction. |
| C64 hwDomainFlowUpByte | 1.3.6.1.4.1.2011.5.109.1.6.1.6 | Counter64 | read-only | The byte number of flow on up direction. |
| C64 hwDomainFlowUpPkt | 1.3.6.1.4.1.2011.5.109.1.6.1.7 | Counter64 | read-only | The packet number of flow on up direction. |
| I32 hwDomainIPTotalNum | 1.3.6.1.4.1.2011.5.109.1.6.1.8 | Integer32 | read-only | Total IP addresses number configured in this domain. |
| I32 hwDomainIPUsedNum | 1.3.6.1.4.1.2011.5.109.1.6.1.9 | Integer32 | read-only | Used IP addresses number. |
| I32 hwDomainIPConflictNum | 1.3.6.1.4.1.2011.5.109.1.6.1.10 | Integer32 | read-only | Conflicted IP addresses number in this domain. |
| I32 hwDomainIPExcludeNum | 1.3.6.1.4.1.2011.5.109.1.6.1.11 | Integer32 | read-only | Excluded IP addresses number in this domain. |
| I32 hwDomainIPIdleNum | 1.3.6.1.4.1.2011.5.109.1.6.1.12 | Integer32 | read-only | Idle IP addresses number in this domain. |
| hwRadiusGroupTable | 1.3.6.1.4.1.2011.5.109.1.7 | not-accessible | The radius group table which contains some public information of radius group is used to configure property of radius group. The index of this table is hwRadiusGroupName. | |
| hwRadiusGroupEntry | 1.3.6.1.4.1.2011.5.109.1.7.1 | not-accessible | The radius group table which contains some public information of radius group is used to configure property of radius group. The index of this entry is hwRadiusGroupName. | |
| OCT hwRadiusGroupName | 1.3.6.1.4.1.2011.5.109.1.7.1.1 | OCTET STRING | not-accessible | The index of the table, indicates the name of radius group. |
| OCT hwRadiusServerKey | 1.3.6.1.4.1.2011.5.109.1.7.1.2 | OCTET STRING | read-create | The secret key shared between radius servers. |
| INT hwRadiusServerProtType | 1.3.6.1.4.1.2011.5.109.1.7.1.4 | INTEGER | read-create | This leaf node is not supported. Options: 1. radius(1) -indicates the standard RADIUS protocol 2. radiusPlus10(2) -indicates the RADIUS+1.0 version 3. radiusPlus11(3) -indicates the RADIUS+1.1 version |
| I32 hwRadiusServerRetransmit | 1.3.6.1.4.1.2011.5.109.1.7.1.5 | Integer32 | read-create | The max number of radius packet retransmit. |
| I32 hwRadiusServerTimeout | 1.3.6.1.4.1.2011.5.109.1.7.1.6 | Integer32 | read-create | Radius packet retransmit interval |
| ROW hwRadiusGroupRowStatus | 1.3.6.1.4.1.2011.5.109.1.7.1.7 | RowStatus | read-create | Row admin status, only support CreateAndGo(4),Destory(6),Active(1). Options: 1. active(1) -indicates query operation 2. createAndGo(4) -indicates creating operation 3. destroy(6) -indicates deleting operation |
| hwLocalUserTable | 1.3.6.1.4.1.2011.5.109.1.10 | not-accessible | Local user table. This table is used to configure local user information. The index of this table is hwLocalUserName. | |
| hwLocalUserEntry | 1.3.6.1.4.1.2011.5.109.1.10.1 | not-accessible | Local user table. This table is used to configure local user information. The index of this entry is hwLocalUserName. | |
| OCT hwLocalUserName | 1.3.6.1.4.1.2011.5.109.1.10.1.1 | OCTET STRING | not-accessible | Local user name |
| OCT hwLocalUserPassword | 1.3.6.1.4.1.2011.5.109.1.10.1.2 | OCTET STRING | read-create | local user's password |
| I32 hwLocalUserAccessType | 1.3.6.1.4.1.2011.5.109.1.10.1.3 | Integer32 | read-create | Local user's type. |
| I32 hwLocalUserPriority | 1.3.6.1.4.1.2011.5.109.1.10.1.4 | Integer32 | read-create | Local user's priority. |
| OCT hwftpdirction | 1.3.6.1.4.1.2011.5.109.1.10.1.5 | OCTET STRING | read-create | ftp directory. |
| ROW hwLocalUserRowStatus | 1.3.6.1.4.1.2011.5.109.1.10.1.12 | RowStatus | read-create | Row admin status, only support CreateAndGo(4),Destory(6),Active(1). Options: 1. active(1) -indicates query operation 2. createAndGo(4) -indicates creating operation 3. destroy(6) -indicates deleting operation |
| hwAccessTable | 1.3.6.1.4.1.2011.5.109.1.15 | not-accessible | Access user table. The access table is used to query the property of online users. Notice: Read operation is not allowed for all the items in this table. 1. The index of hwAccessTable also uses hwAccessIndex, get operation only supports the standard get operation with hwAccessIndex as its index. 2. To prevent too much interaction, getnext operation does use the standard operation that uses hwAccessIndex as its index. The index of this table is hwAccessIndex. | |
| hwAccessEntry | 1.3.6.1.4.1.2011.5.109.1.15.1 | not-accessible | Access user table. The access table is used to query the property of online users. Notice: Read operation is not allowed for all the items in this table. 1. The index of hwAccessTable also uses hwAccessIndex, get operation only supports the standard get operation with hwAccessIndex as its index. 2. To prevent too much interaction, getnext operation does use the standard operation that uses hwAccessIndex as its index. The index of this entry is hwAccessIndex. | |
| I32 hwAccessIndex | 1.3.6.1.4.1.2011.5.109.1.15.1.1 | Integer32 | not-accessible | unqualified index |
| OCT hwAccessUserName | 1.3.6.1.4.1.2011.5.109.1.15.1.3 | OCTET STRING | read-only | access user name |
| INT hwAccessPortType | 1.3.6.1.4.1.2011.5.109.1.15.1.5 | INTEGER | read-only | access port type Options: 1. all(1) -all access types allowed 2. ppp(2) -PPP access 3. vlan(3) -This value is not supported 4. vlanweb(4) -Web access 5. vlanportal(5) -This value is not supported 6. vlan8021x(6) -802.1X access 7. telnet(7) -Telnet access 8. ftp(8) -FTP access 9. ssh(9) -SSH access 10.igmp(10) -IGMP access |
| I32 hwAccessPriority | 1.3.6.1.4.1.2011.5.109.1.15.1.6 | Integer32 | read-only | access pri |
| I32 hwAccessSlotNo | 1.3.6.1.4.1.2011.5.109.1.15.1.8 | Integer32 | read-only | slot No |
| I32 hwAccessSubSlotNo | 1.3.6.1.4.1.2011.5.109.1.15.1.9 | Integer32 | read-only | subslot No |
| I32 hwAccessPortNo | 1.3.6.1.4.1.2011.5.109.1.15.1.10 | Integer32 | read-only | port No |
| I32 hwAccessVLANID | 1.3.6.1.4.1.2011.5.109.1.15.1.11 | Integer32 | read-only | vlanid |
| I32 hwAccessPVC | 1.3.6.1.4.1.2011.5.109.1.15.1.12 | Integer32 | read-only | vpi vpc |
| INT hwAccessAuthenMethod | 1.3.6.1.4.1.2011.5.109.1.15.1.13 | INTEGER | read-only | Authentication method. Options: 1. local(1) -local authentication 2. noauth(2) -none authentication 3. radius(3) -RADIUS authentication (default) 4. localRadius(4) -local authentication, and then RADIUS authentication if local authentication fails 5. radiusLocal(5) -RADIUS authentication, and then local authentication if RADIUS authentication fails 6. radiusNoauth(6) -RADIUS authentication, and then no authentication if RADIUS authentication fails |
| INT hwAccessAcctMethod | 1.3.6.1.4.1.2011.5.109.1.15.1.14 | INTEGER | read-only | Account method. Options: 1. local(1) -local accounting 2. radius(2) -RADIUS accounting 3. none(3) -no accounting 4. both(4) -local and RADIUS accounting |
| IP hwAccessIPAddress | 1.3.6.1.4.1.2011.5.109.1.15.1.15 | IpAddress | read-only | IP address. |
| MAC hwAccessMACAddress | 1.3.6.1.4.1.2011.5.109.1.15.1.17 | MacAddress | read-only | The MAC address of access user. |
| T/F hwAccessIfIdleCut | 1.3.6.1.4.1.2011.5.109.1.15.1.18 | TruthValue | read-only | if idle cut. |
| I32 hwAccessIdleCutTime | 1.3.6.1.4.1.2011.5.109.1.15.1.19 | Integer32 | read-only | idle cut time. |
| I32 hwAccessIdleCutFlow | 1.3.6.1.4.1.2011.5.109.1.15.1.20 | Integer32 | read-only | idle cut flow. |
| I32 hwAccessTimeLimit | 1.3.6.1.4.1.2011.5.109.1.15.1.21 | Integer32 | read-only | session time |
| C64 hwAccessTotalFlow64Limit | 1.3.6.1.4.1.2011.5.109.1.15.1.22 | Counter64 | read-only | remain flow(64bit) |
| DAT hwAccessStartTime | 1.3.6.1.4.1.2011.5.109.1.15.1.25 | DateAndTime | read-only | start time |
| T/F hwAccessCARIfUpActive | 1.3.6.1.4.1.2011.5.109.1.15.1.27 | TruthValue | read-only | up flow's control |
| U32 hwAccessCARUpPeakRate | 1.3.6.1.4.1.2011.5.109.1.15.1.28 | Unsigned32 | read-only | up peek rate(Kbps) |
| U32 hwAccessCARUpAverageRate | 1.3.6.1.4.1.2011.5.109.1.15.1.29 | Unsigned32 | read-only | up average rate(Kbps) |
| T/F hwAccessCARIfDnActive | 1.3.6.1.4.1.2011.5.109.1.15.1.31 | TruthValue | read-only | down flow's control |
| U32 hwAccessCARDnPeakRate | 1.3.6.1.4.1.2011.5.109.1.15.1.32 | Unsigned32 | read-only | down peek rate(Kbps) |
| U32 hwAccessCARDnAverageRate | 1.3.6.1.4.1.2011.5.109.1.15.1.33 | Unsigned32 | read-only | down average rate(Kbps) |
| C64 hwAccessUpFlow64 | 1.3.6.1.4.1.2011.5.109.1.15.1.36 | Counter64 | read-only | up flow(64Byte) |
| C64 hwAccessDnFlow64 | 1.3.6.1.4.1.2011.5.109.1.15.1.37 | Counter64 | read-only | down flow(64Byte) |
| C64 hwAccessUpPacket64 | 1.3.6.1.4.1.2011.5.109.1.15.1.38 | Counter64 | read-only | up packet |
| C64 hwAccessDnPacket64 | 1.3.6.1.4.1.2011.5.109.1.15.1.39 | Counter64 | read-only | down packet |
| hwAccessExtTable | 1.3.6.1.4.1.2011.5.109.1.16 | not-accessible | Access user extended table. The index of this table is hwAccessIndex. | |
| hwAccessExtEntry | 1.3.6.1.4.1.2011.5.109.1.16.1 | not-accessible | Access user extended table. The index of this entry is hwAccessIndex. | |
| I32 hwAuthenticationState | 1.3.6.1.4.1.2011.5.109.1.16.1.4 | Integer32 | read-only | Authentication state machine state |
| I32 hwAccountingState | 1.3.6.1.4.1.2011.5.109.1.16.1.6 | Integer32 | read-only | accounting state machine state |
| OCT hwAccessDomainName | 1.3.6.1.4.1.2011.5.109.1.16.1.7 | OCTET STRING | read-only | the domain of the access |
| I32 hwIdleTimeLength | 1.3.6.1.4.1.2011.5.109.1.16.1.8 | Integer32 | read-only | idle-cut time |
| OCT hwAcctSessionID | 1.3.6.1.4.1.2011.5.109.1.16.1.9 | OCTET STRING | read-only | AcctSessionID |
| DAT hwAccessStartAcctTime | 1.3.6.1.4.1.2011.5.109.1.16.1.10 | DateAndTime | read-only | StartAcctTime |
| OCT hwAccessNormalServerGroup | 1.3.6.1.4.1.2011.5.109.1.16.1.11 | OCTET STRING | read-only | AccessNormalServerGroup |
| OCT hwAccessDomainAcctCopySeverGroup | 1.3.6.1.4.1.2011.5.109.1.16.1.12 | OCTET STRING | read-only | AccessNormalServerGroup |
| OCT hwAccessPVlanAcctCopyServerGroup | 1.3.6.1.4.1.2011.5.109.1.16.1.13 | OCTET STRING | read-only | AccessNormalServerGroup |
| INT hwAccessCurAuthenPlace | 1.3.6.1.4.1.2011.5.109.1.16.1.14 | INTEGER | read-only | AccessCurAuthenPlace. Options: 1. none(0) -none authentication 2. local(1) -local authentication 3. remote(2) -remote authentication |
| INT hwAccessActionFlag | 1.3.6.1.4.1.2011.5.109.1.16.1.15 | INTEGER | read-only | AccessActionFlag. Options: 1. idle(0) -idle 2. newuserauth(1) -new user authentication 3. reauth(2) -reauthentication 4. login(3) -login 5. logout(4) -logout 6. authmodify(5) -authorization modify 7. offline(6) -user leaving |
| INT hwAccessAuthtype | 1.3.6.1.4.1.2011.5.109.1.16.1.16 | INTEGER | read-only | Access user type. Options: 1. none(0) -all access types 2. ppp(1) -PPP access 3. dot1x(2) -802.1X access 4. web(3) -Web access 5. bind(4) -binding access 6. fast(5) -fast access 7. wlan(6) -wlan access 8. admin(7) -admin access |
| INT hwAccessType | 1.3.6.1.4.1.2011.5.109.1.16.1.17 | INTEGER | read-only | Access user type. Options: 1. telnet(1) -Telnet access 2. terminal(2) -terminal access 3. ssh(3) -SSH access 4. ftp(4) -FTP access 5. x25pad(5) -x25-PAD access 6. ppp(6) -PPP access 7. pppoe(7) -PPPOE access 8. pppoeovlan(8) -pppoeovlan access 9. pppoa(9) -pppoa access 10. pppoeoa(10) -pppoeoa access 11. pppolns(11) -pppolns access 12. ordinaryvlan(12) -ordinary vlanaccess 13. eap(13) -eap access 14. pnp(14) -pnp access 15. ip(15) -ip access 16. staticvlan(16) -staticvlan access 17. layer2leasedline(17) -layer2leasedline access 18. layer2leasedlineuser(18) -layer2leasedlineuser access 19. layer3leasedline(19) -layer3leasedline access 20. pppoeleasedline(20) -pppoeleasedline access 21. nmsleasedline(21) -nmsleasedline( access 22. proxyleasedline(22) -proxyleasedline access 23. relayleasedline(23) -relayleasedline access 24. e1pos(24) -e1pos access |
| hwAcctSchemeExtTable | 1.3.6.1.4.1.2011.5.109.1.19 | not-accessible | Access scheme extend table. The index of this table is hwAcctSchemeName. | |
| hwAcctSchemeExtEntry | 1.3.6.1.4.1.2011.5.109.1.19.1 | not-accessible | Access scheme extend table. The index of this entry is hwAcctSchemeName. | |
| T/F hwIfRealtimeAcct | 1.3.6.1.4.1.2011.5.109.1.19.1.1 | TruthValue | read-write | if need realtime account |
| I32 hwRealtimeFailMaxnum | 1.3.6.1.4.1.2011.5.109.1.19.1.2 | Integer32 | read-write | The permit time of realtime account failure |
| hwRadiusGroupExtTable | 1.3.6.1.4.1.2011.5.109.1.20 | not-accessible | The radius group configure table which is an extended table of hwRadiusGroupTable is used to configure some extended parameters on radius group. The index of this table is hwRadiusGroupName. | |
| hwRadiusGroupExtEntry | 1.3.6.1.4.1.2011.5.109.1.20.1 | not-accessible | The radius group configure table which is an extended table of hwRadiusGroupTable is used to configure some extended parameters on radius group. The index of this entry is hwRadiusGroupName. | |
| IP hwRadiusPrimaryAuthServerIP | 1.3.6.1.4.1.2011.5.109.1.20.1.1 | IpAddress | read-write | The ip address of primary radius authentication server. |
| I32 hwRadiusPrimaryAuthServerPort | 1.3.6.1.4.1.2011.5.109.1.20.1.2 | Integer32 | read-write | The UDP port of primary radius authentication server. |
| IP hwRadiusSecondaryAuthServerIP1 | 1.3.6.1.4.1.2011.5.109.1.20.1.3 | IpAddress | read-write | The ip address of secondary radius authentication server. |
| I32 hwRadiusSecondaryAuthServerPort1 | 1.3.6.1.4.1.2011.5.109.1.20.1.4 | Integer32 | read-write | The UDP port of secondary radius authentication server. |
| IP hwRadiusPrimaryAcctServerIP | 1.3.6.1.4.1.2011.5.109.1.20.1.17 | IpAddress | read-write | The ip address of primary radius accounting server. |
| I32 hwRadiusPrimaryAcctServerPort | 1.3.6.1.4.1.2011.5.109.1.20.1.18 | Integer32 | read-write | The UDP port of primary radius accounting server. |
| IP hwRadiusSecondaryAcctServerIP1 | 1.3.6.1.4.1.2011.5.109.1.20.1.19 | IpAddress | read-write | The ip address of secondary radius accounting server. |
| I32 hwRadiusSecondaryAcctServerPort1 | 1.3.6.1.4.1.2011.5.109.1.20.1.20 | Integer32 | read-write | The UDP port of secondary radius accounting server. |
| INT hwRadiusPacketUnit | 1.3.6.1.4.1.2011.5.109.1.20.1.35 | INTEGER | read-write | The data unit of the flow info in the radius accounting packet. Options: 1. byte(1) -Indicates the byte as the traffic unit. 2. kbyte(2) -Indicates the kbyte as the traffic unit. 3. mbyte(3) -Indicates the megabyte as the traffic unit. 4. gbyte(4) -Indicates the Gbyte as the traffic unit. |
| INT hwRadiusDomainInclude | 1.3.6.1.4.1.2011.5.109.1.20.1.36 | INTEGER | read-write | User name format in the radius packet. Options: 1. includingdomain(1) -Indicates that a user name contains a domain name. 2. notincludingdomain(2) -Indicates that a user name doesn't contain a domain name. 3. original(3) -Indicates that a user name uses the original domain name. |
| hwAAAStatExtTable | 1.3.6.1.4.1.2011.5.109.1.32 | |||
| hwAAAStatExtEntry | 1.3.6.1.4.1.2011.5.109.1.32.1 | |||
| I32 hwDomainNum | 1.3.6.1.4.1.2011.5.109.1.32.1.1 | Integer32 | read-only | The number of the domains which have been created. |
| I32 hwAuthenSchemeNum | 1.3.6.1.4.1.2011.5.109.1.32.1.2 | Integer32 | read-only | The number of the authenschems which have been created. |
| I32 hwAccSchemeNum | 1.3.6.1.4.1.2011.5.109.1.32.1.3 | Integer32 | read-only | The number of the acctSchemes which have been created. |
| I32 hwTotalAcessNum | 1.3.6.1.4.1.2011.5.109.1.32.1.4 | Integer32 | read-only | The number of access all users. |
| I32 hwTotalOnlineNum | 1.3.6.1.4.1.2011.5.109.1.32.1.5 | Integer32 | read-only | The number of access all ftp user. |
| I32 hwTotalOnlineAccoutNum | 1.3.6.1.4.1.2011.5.109.1.32.1.6 | Integer32 | read-only | The number of access all ssh users. |
| hwRadiusSourceInterfaceObject | 1.3.6.1.4.1.2011.5.109.1.33 | |||
| INT hwRadiusSourceInterfaceIfType | 1.3.6.1.4.1.2011.5.109.1.33.1 | INTEGER | read-write | Indicates the interface type. Options: 1. meth(1) -indicates the MEth interface 2. vlanif(2) -indicates the VLAN interface 3. loopback(3) -indicates the loopback interface 4. notConfiged(4) -indicates that no source interface is configured When this leaf is set to notConfiged(4), it means that no source interface is configured in the case of the create operation, and that the source interface is deleted in the case of the modify operation. |
| I32 hwRadiusSourceInterfaceIfNumber | 1.3.6.1.4.1.2011.5.109.1.33.2 | Integer32 | read-write | Indicates the interface ID. Range: 0-4093 Range for the MEth interface: 0 Range for the VLAN interface: 1-4093 Range for the loopback interface: 0-31 The interface ID and interface type (hwRadiusSourceInterfaceIfType) together identify an interface. |
RFC description
Manages Authentication, Authorization, and Accounting security configuration on Huawei DSLAM devices.
Start monitoring Huawei DSLAM (Digital Subscriber Line Access Multiplexer) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.