DKSF-707-1-X-X-1

All MIBs › DKSF-707-1-X-X-1

Organization: Alentis Electronics

Last Updated: 2014-03-03

Category: Domain: Environmental Monitoring, Vendor: NetPing/DKSF

Description: MIB for DKSF-707 NetPing device firmware 1.x providing advanced environmental monitoring and control objects.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is DKSF-707-1-X-X-1?

DKSF-707-1-X-X-1 is the vendor MIB for the NetPing DKSF-707 device (firmware 1.x), described as a NetPing SMS/GSM bridge that adds cellular connectivity and remote-reboot control to the NetPing product line. It exposes GSM modem status objects (registration, signal strength, failure state) alongside remote reboot/reset action objects. Its monitoring focus is squarely on hardware and connectivity status: whether the GSM modem is registered on the cellular network, its signal strength, and whether soft/forced reboots or stack resets have been triggered, which is critical for a device meant to provide out-of-band recovery when the primary network path is down. It is a self-contained proprietary MIB with no apparent dependency on other standard MIBs beyond basic SNMP trap infrastructure. It is typically deployed as an out-of-band management aid, allowing administrators to remotely reboot stuck equipment via SMS/GSM when normal IP connectivity to a remote site is lost. Engineers can download the DKSF-707-1-X-X-1 file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in DKSF-707-1-X-X-1. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

NetPing DKSF-707 SMS/GSM bridge unit
Alentis Electronics DKSF-707 optical transport equipment

Monitoring Examples

An administrator would poll npGsmRegistration and npGsmStrength to confirm the device's cellular modem is registered and has adequate signal, and check npGsmFailed to detect a GSM connectivity failure at a remote site. If a device at that site becomes unresponsive, the administrator could trigger npSoftReboot, npForcedReboot, or npResetStack to remotely recover it over the GSM out-of-band path. npTrapEmailTo and npTrapInfo show how GSM-related events and reboot actions are reported back via trap or email notification.

What Can Be Monitored

GSM registration status
GSM signal strength
GSM connection failure state
soft/forced reboot actions
stack reset actions

Imported Objects

From SNMPv2-MIB

snmpTraps

OBJECT-IDENTITY

From SNMPv2-SMI

Counter32
Counter64
Gauge32
Integer32
MODULE-IDENTITY
NOTIFICATION-TYPE
OBJECT-TYPE
TimeTicks
enterprises

From SNMPv2-TC

DisplayString
TEXTUAL-CONVENTION
TimeStamp
TruthValue

How to Use in IPNetwork Monitor

Example using npGsmFailed OID:

Select an Alentis Electronics optical transport equipment as the target host to create a monitor — the SNMP service should be up and running on it. Click New Monitor, then check SNMP Custom on the Favorites tab, click Next, and confirm the host. On the next page, click Select... to open the built-in SNMP MIB Browser and type npGsmFailed into the Find box to locate it in the OID tree, then select it and click OK. It reports firmware's GSM module status. On the monitor's Main parameters page you can set the target's SNMP port (default 161), credentials, polling interval, and other settings — see the SNMP Monitor help for details. On the State conditions and Alerting tabs, configure when the monitor should change state and trigger an alert; since this is an INTEGER-type OID, Value bounds is the most useful condition here — trigger an alert if the value is anything other than 'ok', since that indicates the condition this object reports has changed to one worth investigating. Click Finish to create the monitor; you can adjust any parameter later.

OIDs

OID symbolic	OID numeric	Type	Access	Description
lightcom	1.3.6.1.4.1.25728
INT npForcedReboot	1.3.6.1.4.1.25728.911.3	INTEGER	read-write	Write 1 to immediate forced reboot
npGsm	1.3.6.1.4.1.25728.3800
INT npGsmFailedEx	1.3.6.1.4.1.25728.3800.1.1	INTEGER	read-only	Firmware's GSM module status
npGsmInfo	1.3.6.1.4.1.25728.3800.1
INT npGsmRegistration	1.3.6.1.4.1.25728.3800.1.2	INTEGER	read-only	Status of modem registration in GSM network (AT+CREG? result)
INT npGsmStrength	1.3.6.1.4.1.25728.3800.1.3	INTEGER	read-only	GSM signal strength. 0..31 = 0..100%, 99 = unknown or n/a, 255 = updating info
NTF npGsmTrap	1.3.6.1.4.1.25728.3800.2.0.1			GSM modem or SMS firmware problems
npGsmTrapPrefix	1.3.6.1.4.1.25728.3800.2.0
npGsmTraps	1.3.6.1.4.1.25728.3800.2
npReboot	1.3.6.1.4.1.25728.911
INT npResetStack	1.3.6.1.4.1.25728.911.2	INTEGER	read-write	Write 1 to re-initialize network stack
INT npSoftReboot	1.3.6.1.4.1.25728.911.1	INTEGER	read-write	Write 1 to reboot device after current operations completition
STR npTrapEmailTo	1.3.6.1.4.1.25728.90.1	DisplayString	read-only	user-specified e-mail for NetPing Trap Forwarding Service
npTrapInfo	1.3.6.1.4.1.25728.90
uniPingServerSolutionV3	1.3.6.1.4.1.25728.707			MIB for NetPing SMS gsm bridge

RFC description

MIB for NetPing SMS GSM bridge device monitoring GSM module status and network registration.

Start monitoring Alentis Electronics optical transport equipment with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download DKSF-707-1-X-X-1