ENVIROMUXMICRO-MIB

All MIBs › ENVIROMUXMICRO-MIB

Organization: Network Technologies Inc.

Last Updated: 2021-03-07

Category: Domain: Environmental Monitoring, Vendor: NTI/ENVIROMUX

Description: Network Technologies Inc. E-MICRO environmental monitoring MIB for compact sensor units tracking temperature and humidity.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is ENVIROMUXMICRO-MIB?

This is a MIB from Network Technologies Inc. (NTI) for the E-MICRO, a compact environmental monitoring appliance in the NTI Enviromux product family. It exposes environmental sensor data organized into internal and external sensor tables, each carrying a sensor index, type, textual description, measured value, and unit of measurement. Its entire purpose is monitoring physical environmental conditions such as temperature and humidity around IT equipment, making it a hardware-status MIB centered on sensor health and readings rather than network protocol state. No dependency on another standard MIB is apparent; it operates as a vendor-specific, self-contained sensor MIB. It is deployed in data centers, server rooms, and equipment closets where an E-MICRO unit provides low-cost environmental monitoring alongside or in place of larger Enviromux appliances. Engineers can download the ENVIROMUXMICRO-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in ENVIROMUXMICRO-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

NTI Enviromux E-MICRO environmental monitoring appliance

Monitoring Examples

An administrator would poll intSensorTable / intSensorEntry to read the built-in sensor's intSensorValue together with intSensorUnit and intSensorType, catching a temperature reading that exceeds a safe threshold inside an equipment enclosure. Separately, extSensorTable / extSensorEntry covers pluggable external probes, so extSensorValue on an external humidity probe rising above expected levels would flag a leak or HVAC failure in a nearby server room, with extSensorDescription identifying which physical probe triggered the alert.

What Can Be Monitored

internal sensor value and unit
internal sensor type/description
external sensor value and unit
external sensor type/description

Imported Objects

From SNMPv2-SMI

Integer32
MODULE-IDENTITY
OBJECT-TYPE
enterprises

From SNMPv2-TC

DisplayString

How to Use in IPNetwork Monitor

Example using intSensorValue OID:

Select an NTI Enviromux E-MICRO environmental monitoring appliance as the target host to create a monitor — the SNMP service should be up and running on it. Click New Monitor, then check SNMP Custom on the Favorites tab, click Next, and confirm the host. On the next page, click Select... to open the built-in SNMP MIB Browser and type intSensorValue into the Find box to locate it in the OID tree, selecting the specific row/instance you want to monitor since this is a table column, then select it and click OK. The value of the integrated sensor reading. For temperature, voltage, current or low voltage, it is presented in tenths of degrees/volts. On the monitor's Main parameters page you can set the target's SNMP port (default 161), credentials, polling interval, and other settings — see the SNMP Monitor help for details. On the State conditions and Alerting tabs, configure when the monitor should change state and trigger an alert; since this is an Integer32-type OID, Value bounds is the most useful condition here — trigger an alert if the reported value exceeds the level expected for healthy operation, since sustained high temperature often precedes thermal shutdown or hardware degradation. Click Finish to create the monitor; you can adjust any parameter later.

OIDs

OID symbolic	OID numeric	Type	Access	Description
nti	1.3.6.1.4.1.3699
products	1.3.6.1.4.1.3699.1
hardware	1.3.6.1.4.1.3699.1.1
enviromuxMicro	1.3.6.1.4.1.3699.1.1.12			E-MICRO MIB file.
masterUnit	1.3.6.1.4.1.3699.1.1.12.1
intSensors	1.3.6.1.4.1.3699.1.1.12.1.1
intSensorTable	1.3.6.1.4.1.3699.1.1.12.1.1.1		not-accessible	Table of internal Sensors entries
intSensorEntry	1.3.6.1.4.1.3699.1.1.12.1.1.1.1		not-accessible	An internal sensor entry
I32 intSensorIndex	1.3.6.1.4.1.3699.1.1.12.1.1.1.1.1	Integer32	not-accessible	The index of the integrated sensor entry 1..3
INT intSensorType	1.3.6.1.4.1.3699.1.1.12.1.1.1.1.2	INTEGER	read-only	Sensor Type
STR intSensorDescription	1.3.6.1.4.1.3699.1.1.12.1.1.1.1.3	DisplayString	read-only	Sensor Description
I32 intSensorValueEx	1.3.6.1.4.1.3699.1.1.12.1.1.1.1.4	Integer32	read-only	The value of the integrated sensor reading. For temperature, voltage, current or low voltage, it is presented in tenths of degrees/volts
I32 intSensorUnit	1.3.6.1.4.1.3699.1.1.12.1.1.1.1.5	Integer32	read-only	The measuremnet unit for this sensor in numeric format. It is important only for temperature
extSensors	1.3.6.1.4.1.3699.1.1.12.1.2
extSensorTable	1.3.6.1.4.1.3699.1.1.12.1.2.1		not-accessible	Table of external Sensors entries
extSensorEntry	1.3.6.1.4.1.3699.1.1.12.1.2.1.1		not-accessible	An external sensor entry
I32 extSensorIndex	1.3.6.1.4.1.3699.1.1.12.1.2.1.1.1	Integer32	not-accessible	The index of the external sensor entry 1..6
INT extSensorType	1.3.6.1.4.1.3699.1.1.12.1.2.1.1.2	INTEGER	read-only	Sensor Type
STR extSensorDescription	1.3.6.1.4.1.3699.1.1.12.1.2.1.1.3	DisplayString	read-only	Sensor Description
I32 extSensorValue	1.3.6.1.4.1.3699.1.1.12.1.2.1.1.4	Integer32	read-only	The value of the external sensor reading. For temperature, voltage, current or low voltage, it is presented in tenths of degrees/volts
I32 extSensorUnit	1.3.6.1.4.1.3699.1.1.12.1.2.1.1.5	Integer32	read-only	The measuremnet unit for this sensor in numeric format. It is important only for temperature
digInputs	1.3.6.1.4.1.3699.1.1.12.1.3
digInputTable	1.3.6.1.4.1.3699.1.1.12.1.3.1		not-accessible	Table of digital input entries
digInputEntry	1.3.6.1.4.1.3699.1.1.12.1.3.1.1		not-accessible	A digital input entry
I32 digInputIndex	1.3.6.1.4.1.3699.1.1.12.1.3.1.1.1	Integer32	not-accessible	The index of the digital input entry 1..2
STR digInputDescription	1.3.6.1.4.1.3699.1.1.12.1.3.1.1.2	DisplayString	read-only	Sensor Description
INT digInputValue	1.3.6.1.4.1.3699.1.1.12.1.3.1.1.3	INTEGER	read-only	The value of the digital reading
ipDevices	1.3.6.1.4.1.3699.1.1.12.1.4
ipDeviceTable	1.3.6.1.4.1.3699.1.1.12.1.4.1		not-accessible	Table of digital input entries
ipDeviceEntry	1.3.6.1.4.1.3699.1.1.12.1.4.1.1		not-accessible	A digital input entry
I32 ipDeviceIndex	1.3.6.1.4.1.3699.1.1.12.1.4.1.1.1	Integer32	not-accessible	The index of the ip device entry 1..4
STR ipDeviceDescription	1.3.6.1.4.1.3699.1.1.12.1.4.1.1.2	DisplayString	read-only	Sensor Description
INT ipDeviceValue	1.3.6.1.4.1.3699.1.1.12.1.4.1.1.3	INTEGER	read-only	The result of the ip device ping test
eAlerts	1.3.6.1.4.1.3699.1.1.12.1.5
alertTable	1.3.6.1.4.1.3699.1.1.12.1.5.1		not-accessible	Table of alert entries
alertEntry	1.3.6.1.4.1.3699.1.1.12.1.5.1.1		not-accessible	An alert entry
I32 alertIndex	1.3.6.1.4.1.3699.1.1.12.1.5.1.1.1	Integer32	not-accessible	The index of the alert entry 1..32
INT alertEnabled	1.3.6.1.4.1.3699.1.1.12.1.5.1.1.2	INTEGER	read-only	Shows if alert is enabled 0..1
STR alertSensor	1.3.6.1.4.1.3699.1.1.12.1.5.1.1.3	DisplayString	read-only	Alert Sensor Description
I32 alertSensorValue	1.3.6.1.4.1.3699.1.1.12.1.5.1.1.4	Integer32	read-only	The value of the sensor for analog sensors or open/closed for digital inputs
I32 alertThreshold	1.3.6.1.4.1.3699.1.1.12.1.5.1.1.5	Integer32	read-only	The value of the alert threshold for analog sensors, irrelevant for alerts for digital inputs
INT alertThresholdType	1.3.6.1.4.1.3699.1.1.12.1.5.1.1.6	INTEGER	read-only	The type of the alert threshold for analog sensors, irrelevant for alerts for digital inputs
INT alertStatus	1.3.6.1.4.1.3699.1.1.12.1.5.1.1.7	INTEGER	read-only	The current status of the alert
smAlerts	1.3.6.1.4.1.3699.1.1.12.1.6
smAlertTable	1.3.6.1.4.1.3699.1.1.12.1.6.1		not-accessible	Table of alert entries
smAlertEntry	1.3.6.1.4.1.3699.1.1.12.1.6.1.1		not-accessible	A smart alert entry
I32 smAlertIndex	1.3.6.1.4.1.3699.1.1.12.1.6.1.1.1	Integer32	not-accessible	The index of the alert entry (only one)
INT smAlertEnabled	1.3.6.1.4.1.3699.1.1.12.1.6.1.1.2	INTEGER	read-only	Shows if alert is enabled 0..1
INT smAlertStatus	1.3.6.1.4.1.3699.1.1.12.1.6.1.1.3	INTEGER	read-only	The current status of the alert
hostSystem	1.3.6.1.4.1.3699.1.1.12.1.100
STR unitName	1.3.6.1.4.1.3699.1.1.12.1.100.1	DisplayString	read-only	Unit Name
STR deviceModel	1.3.6.1.4.1.3699.1.1.12.1.100.2	DisplayString	read-only	Device Model
STR serialNumber	1.3.6.1.4.1.3699.1.1.12.1.100.3	DisplayString	read-only	Serial Number
STR firmwareRevision	1.3.6.1.4.1.3699.1.1.12.1.100.4	DisplayString	read-only	Firmware Revision
STR senderEmailAddress	1.3.6.1.4.1.3699.1.1.12.1.100.5	DisplayString	read-only	FROM email address for alerts
enviromuxMicroTraps	1.3.6.1.4.1.3699.1.1.12.100
intSensorsTraps	1.3.6.1.4.1.3699.1.1.12.100.1
NTF intSensor1Trap	1.3.6.1.4.1.3699.1.1.12.100.1.1			Trap issued when internal sensor 1 has a notification to send
NTF intSensor2Trap	1.3.6.1.4.1.3699.1.1.12.100.1.2			Trap issued when internal sensor 2 has a notification to send
NTF intSensor3Trap	1.3.6.1.4.1.3699.1.1.12.100.1.3			Trap issued when internal sensor 3 has a notification to send
extSensorsTraps	1.3.6.1.4.1.3699.1.1.12.100.2
NTF extSensor1Trap	1.3.6.1.4.1.3699.1.1.12.100.2.1			Trap issued when external sensor 1 has a notification to send
NTF extSensor2Trap	1.3.6.1.4.1.3699.1.1.12.100.2.2			Trap issued when external sensor 2 has a notification to send
NTF extSensor3Trap	1.3.6.1.4.1.3699.1.1.12.100.2.3			Trap issued when external sensor 3 has a notification to send
NTF extSensor4Trap	1.3.6.1.4.1.3699.1.1.12.100.2.4			Trap issued when external sensor 4 has a notification to send
NTF extSensor5Trap	1.3.6.1.4.1.3699.1.1.12.100.2.5			Trap issued when external sensor 5 has a notification to send
NTF extSensor6Trap	1.3.6.1.4.1.3699.1.1.12.100.2.6			Trap issued when external sensor 6 has a notification to send
digitalInputsTraps	1.3.6.1.4.1.3699.1.1.12.100.3
NTF digInput1Trap	1.3.6.1.4.1.3699.1.1.12.100.3.1			Trap issued when digital input 1 has a notification to send
NTF digInpu21Trap	1.3.6.1.4.1.3699.1.1.12.100.3.2			Trap issued when digital input 2 has a notification to send
ipDevicesTraps	1.3.6.1.4.1.3699.1.1.12.100.4
NTF ipDevice1Trap	1.3.6.1.4.1.3699.1.1.12.100.4.1			Trap issued when IP device 1 has a notification to send
NTF ipDevice2Trap	1.3.6.1.4.1.3699.1.1.12.100.4.2			Trap issued when IP device 2 has a notification to send
NTF ipDevice3Trap	1.3.6.1.4.1.3699.1.1.12.100.4.3			Trap issued when IP device 3 has a notification to send
NTF ipDevice4Trap	1.3.6.1.4.1.3699.1.1.12.100.4.4			Trap issued when IP device 4 has a notification to send
otherProduct	1.3.6.1.4.1.3699.1.1.200
software	1.3.6.1.4.1.3699.1.2

RFC description

Network Technologies Inc. MIB for E-MICRO environmental monitoring device managing sensors, alerts, and host system variables.

Start monitoring NTI Enviromux E-MICRO environmental monitoring appliance with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download ENVIROMUXMICRO-MIB