DKSF-70-5-X-X-1 :: npThermoStatus

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsDKSF-70-5-X-X-1npThermoStatus

npThermoStatus

Module: DKSF-70-5-X-X-1

OID (symbolic): DKSF-70-5-X-X-1::npThermoStatus

OID (numeric): 1.3.6.1.4.1.25728.8800.1.1.3

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-only

Description: Temperature status (0=fault, 1=underheat, 2=normal, 3=overheat)

What is npThermoStatus?

This reports whether this temperature sensor's reading is currently in a failed, underheat, normal, or overheat state relative to the configured thresholds. An admin watches for anything other than 'norm' as an immediate signal that environmental conditions or the sensor itself need attention.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.25728.8800.1.1.3
snmpwalk -v2c -c public <target> DKSF-70-5-X-X-1::npThermoStatus

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.25728.8800.1.1.3.1
snmpget -v2c -c public <target> DKSF-70-5-X-X-1::npThermoStatus.1

SNMPv3 example:

snmpget -v3 -l authPriv -u snmpv3-user -a SHA -A "AuthPassword1" -x AES -X "PrivPassword1" <target> npThermoStatus.1

Start monitoring NetPing DKSF-70 remote sensing/relay device with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the DKSF-70-5-X-X-1::npThermoStatus OID value, configure state conditions and alerts, and monitor any NetPing DKSF-70 remote sensing/relay device from a single console.

OID Breakdown

Upper-level ancestors (10 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.25728lightcomDKSF-201-9-X-X-1
1.3.6.1.4.1.25728.8800npThermoDKSF-201-9-X-X-1
1.3.6.1.4.1.25728.8800.1npThermoTableDKSF-201-9-X-X-1
1.3.6.1.4.1.25728.8800.1.1npThermoEntryDKSF-201-9-X-X-1
Numeric OIDNameModule
1.3.6.1.4.1.25728.8800.1.1.3npThermoStatusDKSF-70-5-X-X-1