All MIBs › DKSF-60-4-X-X-X › npThermoLow
npThermoLow
Module: DKSF-60-4-X-X-X
OID (symbolic): DKSF-60-4-X-X-X::npThermoLow
OID (numeric): 1.3.6.1.4.1.25728.8800.1.1.4
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-only
Description: Bottom margin of normal temperature range, deg.C
What is npThermoLow?
This read-only INTEGER reports the configured lower threshold, in degrees Celsius, below which a temperature sensor's status is flagged low(1). An admin references this alongside npThermoValue to understand why a sensor tripped into an out-of-range state.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.25728.8800.1.1.4 snmpwalk -v2c -c public <target> DKSF-60-4-X-X-X::npThermoLow
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.25728.8800.1.1.4.1 snmpget -v2c -c public <target> DKSF-60-4-X-X-X::npThermoLow.1
Start monitoring NetPing DKSF-60 remote power/relay control unit with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the DKSF-60-4-X-X-X::npThermoLow OID value, configure state conditions and alerts, and monitor any NetPing DKSF-60 remote power/relay control unit from a single console.
OID Breakdown
Upper-level ancestors (10 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.25728 | lightcom | DKSF-201-9-X-X-1 |
| 1.3.6.1.4.1.25728.8800 | npThermo | DKSF-201-9-X-X-1 |
| 1.3.6.1.4.1.25728.8800.1 | npThermoTable | DKSF-201-9-X-X-1 |
| 1.3.6.1.4.1.25728.8800.1.1 | npThermoEntry | DKSF-201-9-X-X-1 |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.25728.8800.1.1.4 | npThermoLow | DKSF-60-4-X-X-X |