All MIBs › DKSF-50-11-X-X-X › npThermoHigh
npThermoHigh
Module: DKSF-50-11-X-X-X
OID (symbolic): DKSF-50-11-X-X-X::npThermoHigh
OID (numeric): 1.3.6.1.4.1.25728.8800.1.1.5
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-only
Description: Top margin of normal temperature range, deg.C
What is npThermoHigh?
This is the configured top edge of the normal temperature range for the sensor, in degrees Celsius; npThermoStatus flips to high(3) once the reading exceeds it. Tune it to the equipment's safe operating ceiling so an overheating cabinet trips an alert before hardware damage.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.25728.8800.1.1.5 snmpwalk -v2c -c public <target> DKSF-50-11-X-X-X::npThermoHigh
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.25728.8800.1.1.5.1 snmpget -v2c -c public <target> DKSF-50-11-X-X-X::npThermoHigh.1
Start monitoring Alentis Electronics NetPing remote sensing/control device with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the DKSF-50-11-X-X-X::npThermoHigh OID value, configure state conditions and alerts, and monitor any Alentis Electronics NetPing remote sensing/control device from a single console.
OID Breakdown
Upper-level ancestors (10 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.25728 | lightcom | DKSF-201-9-X-X-1 |
| 1.3.6.1.4.1.25728.8800 | npThermo | DKSF-201-9-X-X-1 |
| 1.3.6.1.4.1.25728.8800.1 | npThermoTable | DKSF-201-9-X-X-1 |
| 1.3.6.1.4.1.25728.8800.1.1 | npThermoEntry | DKSF-201-9-X-X-1 |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.25728.8800.1.1.5 | npThermoHigh | DKSF-50-11-X-X-X |