All MIBs › DKSF-48-4-X-X-1 › npThermoStatus
npThermoStatus
Module: DKSF-48-4-X-X-1
OID (symbolic): DKSF-48-4-X-X-1::npThermoStatus
OID (numeric): 1.3.6.1.4.1.25728.8800.1.1.3
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-only
Description: Temperature status (0=fault, 1=underheat, 2=normal, 3=overheat)
What is npThermoStatus?
This read-only value classifies the sensor's current reading against its configured normal range: failed, low (underheat), norm, or high (overheat), giving a quick pass/fail check without reading the raw temperature.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.25728.8800.1.1.3 snmpwalk -v2c -c public <target> DKSF-48-4-X-X-1::npThermoStatus
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.25728.8800.1.1.3.1 snmpget -v2c -c public <target> DKSF-48-4-X-X-1::npThermoStatus.1
SNMPv3 example:
snmpget -v3 -l authPriv -u snmpv3-user -a SHA -A "AuthPassword1" -x AES -X "PrivPassword1" <target> npThermoStatus.1
Start monitoring NetPing DKSF-48 remote sensing/relay device with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the DKSF-48-4-X-X-1::npThermoStatus OID value, configure state conditions and alerts, and monitor any NetPing DKSF-48 remote sensing/relay device from a single console.
OID Breakdown
Upper-level ancestors (10 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.25728 | lightcom | DKSF-201-9-X-X-1 |
| 1.3.6.1.4.1.25728.8800 | npThermo | DKSF-201-9-X-X-1 |
| 1.3.6.1.4.1.25728.8800.1 | npThermoTable | DKSF-201-9-X-X-1 |
| 1.3.6.1.4.1.25728.8800.1.1 | npThermoEntry | DKSF-201-9-X-X-1 |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.25728.8800.1.1.3 | npThermoStatus | DKSF-48-4-X-X-1 |