All MIBs › DKSF-253-6-X-A-X › npElecEnergy100
npElecEnergy100
Module: DKSF-253-6-X-A-X
OID (symbolic): DKSF-253-6-X-A-X::npElecEnergy100
OID (numeric): 1.3.6.1.4.1.25728.9700.1.1.5
Node type: OBJECT-TYPE
Type: Counter32
Access: read-write
Description: Energy counter, kWh*100, based on pulse count
What is npElecEnergy100?
Reports the same cumulative energy total as npElecEnergy but scaled by 100 (kWh*100) for finer resolution without using a float type; also writable to set/correct the stored value.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.25728.9700.1.1.5 snmpwalk -v2c -c public <target> DKSF-253-6-X-A-X::npElecEnergy100
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.25728.9700.1.1.5.1 snmpget -v2c -c public <target> DKSF-253-6-X-A-X::npElecEnergy100.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.25728.9700.1.1.5.1 i <value>
Start monitoring NetPing DKSF-253 remote sensing/IO device with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the DKSF-253-6-X-A-X::npElecEnergy100 OID value, configure state conditions and alerts, and monitor any NetPing DKSF-253 remote sensing/IO device from a single console.
OID Breakdown
Upper-level ancestors (10 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.25728 | lightcom | DKSF-201-9-X-X-1 |
| 1.3.6.1.4.1.25728.9700 | npElecMeter | DKSF-253-5-X-A-X |
| 1.3.6.1.4.1.25728.9700.1 | npElecTable | DKSF-253-5-X-A-X |
| 1.3.6.1.4.1.25728.9700.1.1 | npElecEntry | DKSF-253-5-X-A-X |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.25728.9700.1.1.5 | npElecEnergy100 | DKSF-253-6-X-A-X |