DKSF-253-5-X-A-X :: npElecEnergy100

MIB Reference — IPNetwork Monitor · Updated October 02, 2026

All MIBs › DKSF-253-5-X-A-X › npElecEnergy100

npElecEnergy100

Module: DKSF-253-5-X-A-X

OID (symbolic): DKSF-253-5-X-A-X::npElecEnergy100

OID (numeric): 1.3.6.1.4.1.25728.9700.1.1.5

Node type: OBJECT-TYPE

Type: Counter32

Access: read-write

Description: Energy counter, kWh*100, based on pulse count Write 0 to clear (npElecEnergy, npElecEnergy100 and npIoPulseCounter at once)

What is npElecEnergy100?

The same cumulative energy total as npElecEnergy but scaled by 100 (units of 0.01 kWh) for finer resolution; writing 0 clears it along with npElecEnergy and npIoPulseCounter simultaneously.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.25728.9700.1.1.5
snmpwalk -v2c -c public <target> DKSF-253-5-X-A-X::npElecEnergy100

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.25728.9700.1.1.5.1
snmpget -v2c -c public <target> DKSF-253-5-X-A-X::npElecEnergy100.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.25728.9700.1.1.5.1 i <value>

Start monitoring Alentis Electronics NetPing remote sensing/control device with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the DKSF-253-5-X-A-X::npElecEnergy100 OID value, configure state conditions and alerts, and monitor any Alentis Electronics NetPing remote sensing/control device from a single console.

OID Breakdown

Upper-level ancestors (7 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.25728lightcomDKSF-201-9-X-X-1
Numeric OIDNameModule
1.3.6.1.4.1.25728.9700npElecMeterDKSF-253-5-X-A-X
1.3.6.1.4.1.25728.9700.1npElecTableDKSF-253-5-X-A-X
1.3.6.1.4.1.25728.9700.1.1npElecEntryDKSF-253-5-X-A-X
1.3.6.1.4.1.25728.9700.1.1.5npElecEnergy100DKSF-253-5-X-A-X