All MIBs › DELLRCSG2-TRAP-MIB
Category: Alarm and Event Management, Hardware and Environment, Vendor: Dell
Description: Defines trap notifications and alert events for Dell RCSG2 chassis management.
Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.
What Is DELLRCSG2-TRAP-MIB?
DELLRCSG2-TRAP-MIB is a Dell vendor MIB defining SNMP trap/notification objects for the RCSG2 chassis management platform (a Dell remote console/management controller generation), part of Dell's out-of-band chassis management tooling. It belongs to the fault/event category of MIBs, carrying no polled tables of its own but defining varbind objects attached to traps such as firmware/image updates, user session activity, and switch/device naming changes. For monitoring it is used almost exclusively for software and administrative status events: it reports things like firmware image updates in progress (current vs. new version), user login/session identifiers, and renaming of managed target devices or tiered switches, rather than continuous hardware sensor polling. It depends on the parent DELLRCSG2 chassis management MIB tree and the standard SNMP-NOTIFICATION-TYPE/trap framework for delivering these alerts. It is deployed in Dell blade chassis or modular chassis management environments where the RCSG2 controller sends real-time alerts to a central NMS, typically after an administrator performs a DELLRCSG2-TRAP-MIB download to load the trap definitions into that NMS.
IPNetwork Monitor allows you to monitor SNMP objects defined in DELLRCSG2-TRAP-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.
Supported Devices
- Dell RCSG2 chassis management controller (blade/modular chassis)
Monitoring Examples
When a chassis administrator uploads new firmware, the device would emit a trap carrying dellrcsg2TrapObjectImageType, dellrcsg2TrapObjectImageCurrentVersion, and dellrcsg2TrapObjectImageNewVersion, letting an NMS log the exact firmware transition and flag if it doesn't match the expected version. A user-management trap would carry dellrcsg2TrapObjectUserName and dellrcsg2TrapObjectSessionIdentifier to audit who logged into the chassis controller and when. Renaming events use dellrcsg2TrapObjectTargetDeviceName and dellrcsg2TrapObjectOldTargetDeviceName so an admin can correlate a naming change with subsequent inventory changes in the NMS.
What Can Be Monitored
- firmware image update events
- current/new firmware version
- user login/session activity
- device/switch rename events
- target device identification changes
This MIB depends on
Related MIBs
Imported Objects
From RFC-1212
| OBJECT-TYPE |
From RFC-1215
| TRAP-TYPE |
From RFC1155-SMI
| Counter | |
| Gauge | |
| IpAddress | |
| NetworkAddress | |
| TimeTicks | |
| enterprises |
From RFC1213-MIB
| DisplayString | |
| PhysAddress |
OIDs
| OID symbolic | OID numeric | Type | Access | Description |
|---|---|---|---|---|
| dell | 1.3.6.1.4.1.10418 | |||
| dellrcsg2 | 1.3.6.1.4.1.10418.18 | |||
| dellrcsg2Products | 1.3.6.1.4.1.10418.18.21 | |||
| NTF dellrcsg2RebootStartedTrap | 1.3.6.1.4.1.10418.18.21.0.1 | The RCS is in the process of rebooting. The name of the user who initiated the reboot is contained in dellrcsg2TrapObjectUserName. | ||
| NTF dellrcsg2UserLoginTrap | 1.3.6.1.4.1.10418.18.21.0.2 | A user logged into the RCS. The name of the user who logged in is contained in dellrcsg2TrapObjectUserName. | ||
| NTF dellrcsg2UserLogoutTrap | 1.3.6.1.4.1.10418.18.21.0.3 | A user logged out of the RCS. The name of the user who logged out is contained in dellrcsg2TrapObjectUserName. | ||
| NTF dellrcsg2TargetSessionStartedTrap | 1.3.6.1.4.1.10418.18.21.0.4 | A target session has started. This may be a serial or KVM session, depending on the type of target. The name of the user who is connected to the session is contained in dellrcsg2TrapObjectUserName. The session identifier is contained in dellrcsg2TrapObjectSessionIdentifier. The user address is contained in dellrcsg2TrapObjectUserAddress. The session type is contained in dellrcsg2TrapObjectSessionType. | ||
| NTF dellrcsg2TargetSessionStoppedTrap | 1.3.6.1.4.1.10418.18.21.0.5 | A target session has stoppped. This may be a serial or KVM session, depending on the type of target. The name of the user who was connected to the session is contained in dellrcsg2TrapObjectUserName. The session identifier is contained in dellrcsg2TrapObjectSessionIdentifier. The user address is contained in dellrcsg2TrapObjectUserAddress. The session type is contained in dellrcsg2TrapObjectSessionType. | ||
| NTF dellrcsg2TargetSessionTerminatedTrap | 1.3.6.1.4.1.10418.18.21.0.6 | A target session has been terminated by another user. This may be a serial or KVM session, depending on the type of target. The name of the user who terminated the session is contained in dellrcsg2TrapObjectUserName if available. An empty string is reported if a user name is not available. The name of the user who was terminated from the session is contained in dellrcsg2TrapObjectTargetUserName. The session identifier is contained in dellrcsg2TrapObjectSessionIdentifier. The user address is contained in dellrcsg2TrapObjectUserAddress. The session type is contained in dellrcsg2TrapObjectSessionType. | ||
| NTF dellrcsg2LocalPortSessionStartedTrap | 1.3.6.1.4.1.10418.18.21.0.7 | A local port target session has started. The session identifier is contained in dellrcsg2TrapObjectSessionIdentifier. This Trap is deprecated and is no longer used. | ||
| NTF dellrcsg2LocalPortSessionStoppedTrap | 1.3.6.1.4.1.10418.18.21.0.8 | A local port target session has stopped. The session identifier is contained in dellrcsg2TrapObjectSessionIdentifier. This Trap is deprecated and is no longer used. | ||
| NTF dellrcsg2LocalPortSessionTerminatedTrap | 1.3.6.1.4.1.10418.18.21.0.9 | A local port target session has been terminated by another user. The name of the user who terminated the session is contained in dellrcsg2TrapObjectUserName. The session identifier is contained in dellrcsg2TrapObjectSessionIdentifier. This Trap is deprecated and is no longer used. | ||
| NTF dellrcsg2ImageFileUpgradeStarted | 1.3.6.1.4.1.10418.18.21.0.10 | The RCS has started an image upgrade. The name of the user who originally started the image upgrade is contained in dellrcsg2TrapObjectUserName if available. An empty string is reported if a user name is not available. The URL of the file that was loaded is contained in dellrcsg2TrapObjectFileName. The version of the image that the RCS is upgrading to is contained in dellrcsg2TrapObjectImageNewVersion. The version of the image that the RCS is currently running is contained in dellrcsg2TrapObjectImageCurrentVersion. | ||
| NTF dellrcsg2ImageFileUpgradeResultsTrap | 1.3.6.1.4.1.10418.18.21.0.11 | The result of an image upgrade. | ||
| NTF dellrcsg2UserAddedTrap | 1.3.6.1.4.1.10418.18.21.0.12 | A new user has been added to the local user database. The name of the user who added the new user is contained in dellrcsg2TrapObjectUserName. The name of the new user is contained in dellrcsg2TrapObjectTargetUserName. | ||
| NTF dellrcsg2UserDeletedTrap | 1.3.6.1.4.1.10418.18.21.0.13 | A user has been deleted from the local user database. The name of the user who deleted the user is contained in dellrcsg2TrapObjectUserName. The name of the user who was deleted is contained in dellrcsg2TrapObjectTargetUserName. | ||
| NTF dellrcsg2UserModifiedTrap | 1.3.6.1.4.1.10418.18.21.0.14 | A user was modified. The name of the user who modified the user is contained in dellrcsg2TrapObjectUserName. The name of the user who was modified is contained in dellrcsg2TrapObjectTargetUserName. | ||
| NTF dellrcsg2UserLockedTrap | 1.3.6.1.4.1.10418.18.21.0.15 | A user account has been locked. The name of the user who was locked is contained in dellrcsg2TrapObjectTargetUserName. The reason for which the user account has been locked is contained in dellrcsg2TrapObjectLockReason. | ||
| NTF dellrcsg2UserUnlockedTrap | 1.3.6.1.4.1.10418.18.21.0.16 | A user account has been unlocked. The name of the user who unlocked the user is contained in dellrcsg2TrapObjectUserName. When the user account is unlocked by a RCS reboot or by the expiration of the lockout period (as specified in the dellrcsg2TrapObjectUnlockReason object), the name of the user will be blank. The name of the user who was unlocked is contained in dellrcsg2TrapObjectTargetUserName. The reason for which the user account has been unlocked is contained in dellrcsg2TrapObjectUnlockReason. | ||
| NTF dellrcsg2UserAuthenticationFailureTrap | 1.3.6.1.4.1.10418.18.21.0.17 | A user failed to authenticate with the RCS. The name of the user who failed to authenticate is contained in dellrcsg2TrapObjectUserName. | ||
| NTF dellrcsg2SIPAddedTrap | 1.3.6.1.4.1.10418.18.21.0.18 | A SIP was added. The ID of the SIP which was added is contained in dellrcsg2TrapObjectSIPId. | ||
| NTF dellrcsg2SIPRemovedTrap | 1.3.6.1.4.1.10418.18.21.0.19 | A SIP was removed. The ID of the SIP which was removed is contained in dellrcsg2TrapObjectSIPId. | ||
| NTF dellrcsg2SIPMovedTrap | 1.3.6.1.4.1.10418.18.21.0.20 | A SIP was moved. The ID of the SIP which was moved is contained in dellrcsg2TrapObjectSIPId. The name of the target device attached to the SIP is contained in dellrcsg2TrapObjectTargetDeviceName. The input port number on the RCS that the SIP is now connected to is contained in dellrcsg2TrapObjectInputPort. The input port number on the RCS that the SIP was previously connected to is contained in dellrcsg2TrapObjectOldInputPort. | ||
| NTF dellrcsg2TargetDeviceNameChangedTrap | 1.3.6.1.4.1.10418.18.21.0.21 | The name of a server has changed. The previous name of the server is contained in dellrcsg2TrapObjectOldTargetDeviceName. The new name of the server is contained in dellrcsg2TrapObjectTargetDeviceName. The ID of the SIP the server is attached to is contained in dellrcsg2TrapObjectSIPId. | ||
| NTF dellrcsg2TieredSwitchAddedTrap | 1.3.6.1.4.1.10418.18.21.0.22 | A tiered switch was added. The name of the switch which was added is contained in dellrcsg2TrapObjectTieredSwitchName. The ID of the SIP the switch was added to is contained in dellrcsg2TrapObjectSIPId. | ||
| NTF dellrcsg2TieredSwitchRemovedTrap | 1.3.6.1.4.1.10418.18.21.0.23 | A tiered switch was removed. The name of the switch which was removed is contained in dellrcsg2TrapObjectTieredSwitchName. The ID of the SIP the switch was attached to is contained in dellrcsg2TrapObjectSIPId. | ||
| NTF dellrcsg2TieredSwitchNameChangedTrap | 1.3.6.1.4.1.10418.18.21.0.24 | The name of a tiered switch has changed. The previous name of the tiered switch is contained in dellrcsg2TrapObjectOldTieredSwitchName. The new name of the tiered switch is contained in dellrcsg2TrapObjectTieredSwitchName. The ID of the SIP the switch is attached to is contained in dellrcsg2TrapObjectSIPId. | ||
| NTF dellrcsg2ConfigurationFileLoadedTrap | 1.3.6.1.4.1.10418.18.21.0.25 | The RCS has loaded a configuration file. The name of the user who commanded the RCS to load the configuration file is contained in dellrcsg2TrapObjectUserName. The URL of the file that was loaded is contained in dellrcsg2TrapObjectFileName. | ||
| NTF dellrcsg2UserDatabaseFileLoadedTrap | 1.3.6.1.4.1.10418.18.21.0.26 | The RCS has loaded a user database file. The name of the user who commanded the RCS to load the user database file is contained in dellrcsg2TrapObjectUserName. The URL of the file that was loaded is contained in dellrcsg2TrapObjectFileName. | ||
| NTF dellrcsg2CaCertificateLoaded | 1.3.6.1.4.1.10418.18.21.0.27 | A user has loaded a new CA Certificate in the RCS. The name of the user who loaded the certificate is contained in dellrcsg2TrapObjectUserName. | ||
| NTF dellrcsg2SIPImageUpgradeStarted | 1.3.6.1.4.1.10418.18.21.0.28 | A software image upgrade has started on a SIP. The name of the user who originally started the image upgrade is contained in dellrcsg2TrapObjectUserName if available. An empty string is reported if a user name is not available. The type of software image being upgraded is contained in dellrcsg2TrapObjectSIPTypeOfImage. The software image version the SIP is upgrading to is contained in dellrcsg2TrapObjectImageNewVersion. The software image version the SIP is currently running is contained in dellrcsg2TrapObjectImageCurrentVersion. The name of the server connected to the SIP being upgraded is contained in dellrcsg2TrapObjectTargetDeviceName. The ID of the SIP being upgraded is contained in dellrcsg2TrapObjectSIPId | ||
| NTF dellrcsg2SIPImageUpgradeResultTrap | 1.3.6.1.4.1.10418.18.21.0.29 | The result of a SIP software image upgrade. The image upgrade result is contained in dellrcsg2TrapObjectSIPImageUpgradeResult. The name of the user who originally started the image upgrade is contained in dellrcsg2TrapObjectUserName if available. An empty string is reported if a user name is not available. The type of software image the upgrade result is for is contained in dellrcsg2TrapObjectTypeOfImage. The software image version the SIP attempted to upgrade to is contained in dellrcsg2TrapObjectImageNewVersion. The software image version the SIP is running is contained in dellrcsg2TrapObjectImageCurrentVersion. If the software image upgrade was successful then this version will match the version reported in dellrcsg2TrapObjectImageNewVersion. The name of the server connected to the SIP is contained in dellrcsg2TrapObjectTargetDeviceName. The ID of the SIP the result is for is contained in dellrcsg2TrapObjectSIPId. | ||
| NTF dellrcsg2SIPRestartedTrap | 1.3.6.1.4.1.10418.18.21.0.30 | A SIP has restarted. A SIP will restart after a SIP image upgrade completes. The name of the server connected to the SIP is contained in dellrcsg2TrapObjectTargetDeviceName. The ID of the SIP that restarted is for is contained in dellrcsg2TrapObjectSIPId. | ||
| NTF dellrcsg2VirtualMediaSessionStartedTrap | 1.3.6.1.4.1.10418.18.21.0.31 | A Virtual Media session to a server has started. A target session to the server must have been established by the same user prior to starting the VM session. The name of the user who connected to the VM session is contained in dellrcsg2TrapObjectUserName. The name of the server the user connected to is contained in dellrcsg2TrapObjectTargetDeviceName. The ID of the SIP the target session is using is contained in dellrcsg2TrapObjectSIPId. The user address is contained in dellrcsg2TrapObjectUserAddress. | ||
| NTF dellrcsg2VirtualMediaSessionStoppedTrap | 1.3.6.1.4.1.10418.18.21.0.32 | A virtual media session to a server has stopped. The name of the user who was connected to the VM session is contained in dellrcsg2TrapObjectUserName. The name of the server the user was connected to is contained in dellrcsg2TrapObjectTargetDeviceName. The user address is contained in dellrcsg2TrapObjectUserAddress. | ||
| NTF dellrcsg2VirtualMediaSessionTerminatedTrap | 1.3.6.1.4.1.10418.18.21.0.33 | A virtual media session has been terminated or preempted by another user. The name of the user who terminated or preempted the VM session is contained in dellrcsg2TrapObjectUserName if available. An empty string is reported if a user name is not available. A user name will not be available if a remote session was terminated or preempted from the OSCAR interface and OSCAR authentication is disabled. The name of the user who was terminated or preempted from the VM session is contained in dellrcsg2TrapObjectTargetUserName. The name of the server the user was connected to contained in dellrcsg2TrapObjectTargetDeviceName. The user address is contained in dellrcsg2TrapObjectUserAddress. | ||
| NTF dellrcsg2VirtualMediaSessionReservedTrap | 1.3.6.1.4.1.10418.18.21.0.34 | A user established a reserved virtual media session. The name of the user who has established a reserved virtual media session is contained in dellrcsg2TrapObjectUserName. The name of the server the user was connected to is contained in dellrcsg2TrapObjectTargetDeviceName. The user address is contained in dellrcsg2TrapObjectUserAddress. | ||
| NTF dellrcsg2VirtualMediaSessionUnreservedTrap | 1.3.6.1.4.1.10418.18.21.0.35 | A user established a non-reserved virtual media session. The name of the user who has established a non-reserved virtual media session is contained in dellrcsg2TrapObjectUserName. The name of the server the user was connected to is contained in dellrcsg2TrapObjectTargetDeviceName. The user address is contained in dellrcsg2TrapObjectUserAddress. | ||
| NTF dellrcsg2VirtualMediaDriveMapped | 1.3.6.1.4.1.10418.18.21.0.36 | A virtual media drive has been mapped. The name of the user who has established the virtual media session is contained in dellrcsg2TrapObjectUserName. The name of the server the user was connected to is contained in dellrcsg2TrapObjectTargetDeviceName. The type of drive that has been mapped is contained in dellrcsg2TrapObjectVirtualMediaDriveType. The access mode for the drive that has been mapped is contained in dellrcsg2TrapObjectVirtualMediaDriveAccessMode. The user address is contained in dellrcsg2TrapObjectUserAddress. | ||
| NTF dellrcsg2VirtualMediaDriveUnmapped | 1.3.6.1.4.1.10418.18.21.0.37 | A virtual media drive has been unmapped. The name of the user who has established the virtual media session is contained in dellrcsg2TrapObjectUserName. The name of the server the user was connected to is contained in dellrcsg2TrapObjectTargetDeviceName. The type of drive that has been unmapped is contained in dellrcsg2TrapObjectVirtualMediaDriveType. The access mode for the drive that has been unmapped is contained in dellrcsg2TrapObjectVirtualMediaDriveAccessMode. The user address is contained in dellrcsg2TrapObjectUserAddress. | ||
| NTF dellrcsg2LocalPortVirtualMediaSessionStartedTrap | 1.3.6.1.4.1.10418.18.21.0.38 | A local user has started a Virtual Media session to a server. A target session to the server must have been established by a local user prior to starting the VM session. The name of the user who connected to the VM session is contained in dellrcsg2TrapObjectUserName. The name of the server the user connected to is contained in dellrcsg2TrapObjectTargetDeviceName. The ID of the SIP the target session is using is contained in dellrcsg2TrapObjectSIPId. This Trap is deprecated and is no longer used. | ||
| NTF dellrcsg2LocalPortVirtualMediaSessionStoppedTrap | 1.3.6.1.4.1.10418.18.21.0.39 | A local user has stopped a Virtual Media session to a server. The name of the user who was connected to the VM session is contained in dellrcsg2TrapObjectUserName. The name of the server the user was connected to is contained in dellrcsg2TrapObjectTargetDeviceName. This Trap is deprecated and is no longer used. | ||
| NTF dellrcsg2LocalPortVirtualMediaSessionTerminatedTrap | 1.3.6.1.4.1.10418.18.21.0.40 | A local virtual media session has been terminated or preempted by another user. The name of the user who terminated or preempted the VM session is contained in dellrcsg2TrapObjectUserName if available. An empty string is reported if a user name is not available. The name of the server the user was connected to contained in dellrcsg2TrapObjectTargetDeviceName. This Trap is deprecated and is no longer used. | ||
| NTF dellrcsg2LocalPortVirtualMediaDriveMapped | 1.3.6.1.4.1.10418.18.21.0.41 | A user on the local port has mapped a virtual media drive to the server. The session identifier is contained in dellrcsg2TrapObjectSessionIdentifier. The type of drive that has been unmapped is contained in dellrcsg2TrapObjectVirtualMediaDriveType. The access mode for the drive that has been unmapped is contained in dellrcsg2TrapObjectVirtualMediaDriveAccessMode. This Trap is deprecated and is no longer used. | ||
| NTF dellrcsg2LocalPortVirtualMediaDriveUnmapped | 1.3.6.1.4.1.10418.18.21.0.42 | A user on the local port has unmapped a virtual media drive to the server. The session identifier is contained in dellrcsg2TrapObjectSessionIdentifier. The type of drive that has been unmapped is contained in dellrcsg2TrapObjectVirtualMediaDriveType. The access mode for the drive that has been unmapped is contained in dellrcsg2TrapObjectVirtualMediaDriveAccessMode. This Trap is deprecated and is no longer used. | ||
| NTF dellrcsg2LocalPortVirtualMediaSessionReservedTrap | 1.3.6.1.4.1.10418.18.21.0.43 | A local user has reserved a virtual media session. The name of the server the user was connected to is contained in dellrcsg2TrapObjectTargetDeviceName. This Trap is deprecated and is no longer used. | ||
| NTF dellrcsg2LocalPortVirtualMediaSessionUnreservedTrap | 1.3.6.1.4.1.10418.18.21.0.44 | A user has unreserved a local virtual media session. The name of the server the user was connected to is contained in dellrcsg2TrapObjectTargetDeviceName. This Trap is deprecated and is no longer used. | ||
| NTF dellrcsg2ScreenResolutionChangedTrap | 1.3.6.1.4.1.10418.18.21.0.45 | The screen resolution of a server was changed. The name of the user who changed the screen resolution is contained in dellrcsg2TrapObjectUserName if available. An empty string is reported if a user name is not available. A user name will not be available if the target session controlling the server was started from the local interface and local authentication is disabled. The name of the server the screen resolution was changed on is contained in dellrcsg2TrapObjectTargetDeviceName. The previous screen resolution is contained in dellrcsg2TrapObjectPreviousScreenResolution. The new screen resolution is contained in dellrcsg2TrapObjectCurrentScreenResolution. The session identifier is contained in dellrcsg2TrapObjectSessionIdentifier. | ||
| NTF dellrcsg2AggregatedTargetDeviceStatusChangedTrap | 1.3.6.1.4.1.10418.18.21.0.46 | The status of one or more servers (connection paths) has changed. A list of connection paths whose status has changed is contained in dellrcsg2TrapObjectAggregatedTargetDeviceStatusChanged. This trap is always sent by the RCS on bootup to report the current status of all connection paths. Thereafter the trap is sent when there is a change in connection path status and will include only those paths whose status has changed. | ||
| NTF dellrcsg2FactoryDefaultsSetTrap | 1.3.6.1.4.1.10418.18.21.0.47 | The RCS has been commanded to set itself to factory defaults. The RCS sends this trap after being commanded to set itself to factory defaults but prior to actually reverting to factory defaults. | ||
| NTF dellrcsg2PowerSupplyFailureTrap | 1.3.6.1.4.1.10418.18.21.0.48 | A power supply failure has ocurred, for RCSes with dual power supplies. The power supply which has failed is indicated in dellrcsg2TrapObjectPowerSupply. | ||
| NTF dellrcsg2PowerSupplyRestoredTrap | 1.3.6.1.4.1.10418.18.21.0.49 | A power supply has been restored, for RCSes with dual power supplies. The power supply which has been restored is indicated in dellrcsg2TrapObjectPowerSupply. | ||
| NTF dellrcsg2PduDeviceOnlineTrap | 1.3.6.1.4.1.10418.18.21.0.50 | A power device attached to the RCS is detected to be online. This trap is sent upon initialization of the power device if it is online and responding. Subsequent traps are sent if the power device transitions from offline to online. The port number on the RCS that the power device is attached to is contained in dellrcsg2TrapObjectPduDevicePort. The number of the power device that is connected to a port of the RCS is contained in dellrcsg2TrapObjectPduDeviceNumber. | ||
| NTF dellrcsg2PduDeviceOfflineTrap | 1.3.6.1.4.1.10418.18.21.0.51 | A power device attached to the RCS is detected to be offline. This trap is sent upon initialization of the power device if it is not responding. Subsequent traps are sent if the power device transitions from online to offline. The port number on the RCS that the power device is attached to is contained in dellrcsg2TrapObjectPduDevicePort. The number of the power device that is connected to a port of the RCS is contained in dellrcsg2TrapObjectPduDeviceNumber. | ||
| NTF dellrcsg2PduOutletOnCommandTrap | 1.3.6.1.4.1.10418.18.21.0.52 | A outlet on a power device has been issued the on command. The port number on the RCS that the power device is attached to is contained in dellrcsg2TrapObjectPduDevicePort. The outlet number that was issued the on command is contained in dellrcsg2TrapObjectPduOutlet. The name of the server connected to the power device outlet is contained in dellrcsg2TrapObjectTargetDeviceName. The number of the power device that is connected to a port of the RCS is contained in dellrcsg2TrapObjectPduDeviceNumber. | ||
| NTF dellrcsg2PduOutletOffCommandTrap | 1.3.6.1.4.1.10418.18.21.0.53 | A outlet on a power device has been issued the off command. The port number on the RCS that the power device is attached to is contained in dellrcsg2TrapObjectPduDevicePort. The outlet number that was issued the off command is contained in dellrcsg2TrapObjectPduOutlet. The name of the server connected to the power device outlet is contained in dellrcsg2TrapObjectTargetDeviceName. The number of the power device that is connected to a port of the RCS is contained in dellrcsg2TrapObjectPduDeviceNumber. | ||
| NTF dellrcsg2PduOutletRebootCommandTrap | 1.3.6.1.4.1.10418.18.21.0.54 | A outlet on a power device has been issued the reboot command. The port number on the RCS that the power device is attached to is contained in dellrcsg2TrapObjectPduDevicePort. The outlet number that was issued the reboot command is contained in dellrcsg2TrapObjectPduOutlet. The name of the server connected to the power device outlet is contained in dellrcsg2TrapObjectTargetDeviceName. The number of the power device that is connected to a port of the RCS is contained in dellrcsg2TrapObjectPduDeviceNumber. | ||
| NTF dellrcsg2PduOutletOnSenseFailTrap | 1.3.6.1.4.1.10418.18.21.0.55 | A power device attached to the RCS has detected an on sense failure for a outlet. An on sense failure occurs when a outlet should be in the on state but is actually in the off state. The port number on the RCS that the power device is attached to is contained in dellrcsg2TrapObjectPduDevicePort. The outlet number that has the failure is contained in dellrcsg2TrapObjectPduOutlet. The name of the server connected to the power device outlet is contained in dellrcsg2TrapObjectTargetDeviceName. The number of the power device that is connected to a port of the RCS is contained in dellrcsg2TrapObjectPduDeviceNumber. | ||
| NTF dellrcsg2PduOutletOffSenseFailTrap | 1.3.6.1.4.1.10418.18.21.0.56 | A power device attached to the RCS has detected an off sense failure for a outlet. An off sense failure occurs when a outlet should be in the off state but is actually in the on state. The port number on the RCS that the power device is attached to is contained in dellrcsg2TrapObjectPduDevicePort. The outlet number that has the failure is contained in dellrcsg2TrapObjectPduOutlet. The name of the server connected to the power device outlet is contained in dellrcsg2TrapObjectTargetDeviceName. The number of the power device that is connected to a port of the RCS is contained in dellrcsg2TrapObjectPduDeviceNumber. | ||
| NTF dellrcsg2PduStatusOutletOnTrap | 1.3.6.1.4.1.10418.18.21.0.57 | A power device outlet has changed to the on state. The port number on the RCS that the power device is attached to is contained in dellrcsg2TrapObjectPduDevicePort. The outlet number that has changed to the on state is contained in dellrcsg2TrapObjectPduOutlet. The name of the server connected to the power device outlet is contained in dellrcsg2TrapObjectTargetDeviceName. The number of the power device that is connected to a port of the RCS is contained in dellrcsg2TrapObjectPduDeviceNumber. | ||
| NTF dellrcsg2PduStatusOutletOffTrap | 1.3.6.1.4.1.10418.18.21.0.58 | A power device outlet has changed to the off state. The port number on the RCS that the power device is attached to is contained in dellrcsg2TrapObjectPduDevicePort. The outlet number that has changed to the off state is contained in dellrcsg2TrapObjectPduOutlet. The name of the server connected to the power device outlet is contained in dellrcsg2TrapObjectTargetDeviceName. The number of the power device that is connected to a port of the RCS is contained in dellrcsg2TrapObjectPduDeviceNumber. | ||
| NTF dellrcsg2PduPortNameChangedTrap | 1.3.6.1.4.1.10418.18.21.0.59 | The name of a power device port has changed. The previous name of the power device port is contained in dellrcsg2TrapObjectOldName. The new name of the power device port is contained in dellrcsg2TrapObjectItemName. The port number on the RCS that the power device is attached to is contained in dellrcsg2TrapObjectPduDevicePort. The number of the power device that is connected to a port of the RCS is contained in dellrcsg2TrapObjectPduDeviceNumber. | ||
| NTF dellrcsg2PduOutletNameChangedTrap | 1.3.6.1.4.1.10418.18.21.0.60 | The name of a power device outlet has changed. The previous name of the power device outlet is contained in dellrcsg2TrapObjectOldName. The new name of the power device outlet is contained in dellrcsg2TrapObjectItemName. The port number on the RCS that the power device is attached to is contained in dellrcsg2TrapObjectPduDevicePort. The number of the power device that is connected to a port of the RCS is contained in dellrcsg2TrapObjectPduDeviceNumber. The outlet number of the power device is contained in dellrcsg2TrapObjectPduOutlet. | ||
| NTF dellrcsg2PduInletTotalLoadHighTrap | 1.3.6.1.4.1.10418.18.21.0.61 | A power device attached to the RCS has exceeded the maximum threshold for total load of an inlet. The port number on the RCS that the power device is attached to is contained in dellrcsg2TrapObjectPduDevicePort. The number of the power device that is connected to a port of the RCS is contained in dellrcsg2TrapObjectPduDeviceNumber. The inlet of the power device is contained in dellrcsg2TrapObjectPduDeviceInlet. | ||
| NTF dellrcsg2PduInletTotalLoadLowTrap | 1.3.6.1.4.1.10418.18.21.0.62 | A power device attached to the RCS has gone beneath the minimum threshold for total load. The port number on the RCS that the power device is attached to is contained in dellrcsg2TrapObjectPduDevicePort. The number of the power device that is connected to a port of the RCS is contained in dellrcsg2TrapObjectPduDeviceNumber. The inlet of the power device is contained in dellrcsg2TrapObjectPduDeviceInlet. | ||
| NTF dellrcsg2PduDeviceNameChangedTrap | 1.3.6.1.4.1.10418.18.21.0.63 | The name of a power device has changed. The previous name of the power device is contained in dellrcsg2TrapObjectOldName. The new name of the power device is contained in dellrcsg2TrapObjectItemName. The port number on the RCS that the power device is attached to is contained in dellrcsg2TrapObjectPduDevicePort. The number of the power device that is connected to a port of the RCS is contained in dellrcsg2TrapObjectPduDeviceNumber. | ||
| NTF dellrcsg2PduInletNameChangedTrap | 1.3.6.1.4.1.10418.18.21.0.64 | The name of a power device inlet has changed. The previous name of the power device inlet is contained in dellrcsg2TrapObjectOldName. The new name of the power device inlet is contained in dellrcsg2TrapObjectItemName. The port number on the RCS that the power device is attached to is contained in dellrcsg2TrapObjectPduDevicePort. The number of the power device that is connected to a port of the RCS is contained in dellrcsg2TrapObjectPduDeviceNumber. The inlet of the power device is contained in dellrcsg2TrapObjectPduDeviceInlet. | ||
| NTF dellrcsg2PduOutletLockCommandTrap | 1.3.6.1.4.1.10418.18.21.0.65 | A outlet on a power device has been issued the lock command. The name of the user who originally started the image upgrade is contained in dellrcsg2TrapObjectUserName if available. An empty string is reported if a user name is not available. The port number on the RCS that the power device is attached to is contained in dellrcsg2TrapObjectPduDevicePort. The outlet number that was issued the lock command is contained in dellrcsg2TrapObjectPduOutlet. The name of the server connected to the power device outlet is contained in dellrcsg2TrapObjectTargetDeviceName. The number of the power device that is connected to a port of the RCS is contained in dellrcsg2TrapObjectPduDeviceNumber. | ||
| NTF dellrcsg2PduOutletUnlockCommandTrap | 1.3.6.1.4.1.10418.18.21.0.66 | A outlet on a power device has been issued the unlock command. The name of the user who originally started the image upgrade is contained in dellrcsg2TrapObjectUserName if available. An empty string is reported if a user name is not available. The port number on the RCS that the power device is attached to is contained in dellrcsg2TrapObjectPduDevicePort. The outlet number that was issued the unlock command is contained in dellrcsg2TrapObjectPduOutlet. The name of the server connected to the power device outlet is contained in dellrcsg2TrapObjectTargetDeviceName. The number of the power device that is connected to a port of the RCS is contained in dellrcsg2TrapObjectPduDeviceNumber. | ||
| NTF dellrcsg2PduStatusOutletLockTrap | 1.3.6.1.4.1.10418.18.21.0.67 | A power device outlet has changed to the lock state. The port number on the RCS that the power device is attached to is contained in dellrcsg2TrapObjectPduDevicePort. The outlet number that has changed to the lock state is contained in dellrcsg2TrapObjectPduOutlet. The name of the server connected to the power device outlet is contained in dellrcsg2TrapObjectTargetDeviceName. The number of the power device that is connected to a port of the RCS is contained in dellrcsg2TrapObjectPduDeviceNumber. | ||
| NTF dellrcsg2PduStatusOutletUnlockTrap | 1.3.6.1.4.1.10418.18.21.0.68 | A power device outlet has changed to the unlock state. The port number on the RCS that the power device is attached to is contained in dellrcsg2TrapObjectPduDevicePort. The outlet number that has changed to the unlock state is contained in dellrcsg2TrapObjectPduOutlet. The name of the server connected to the power device outlet is contained in dellrcsg2TrapObjectTargetDeviceName. The number of the power device that is connected to a port of the RCS is contained in dellrcsg2TrapObjectPduDeviceNumber. | ||
| NTF dellrcsg2PduImageFileUpgradeStartedTrap | 1.3.6.1.4.1.10418.18.21.0.69 | The RCS has started an upgrade of the power device software image file. The name of the user who initiated the image upgrade is contained in dellrcsg2TrapObjectUserName if available. The type of software image being upgraded is contained in dellrcsg2TrapObjectTypeOfImage. The software image version the RCS is upgrading the power device to is contained in dellrcsg2TrapObjectImageNewVersion. The software image version the power device is currently running is contained in dellrcsg2TrapObjectImageCurrentVersion. The port number on the RCS that the power device is attached to is contained in dellrcsg2TrapObjectPduDevicePort. The number of the power device that is connected to a port of the RCS is contained in dellrcsg2TrapObjectPduDeviceNumber. | ||
| NTF dellrcsg2PduImageFileUpgradeResultTrap | 1.3.6.1.4.1.10418.18.21.0.70 | The result of a software image file upgrade for a power device. The result is contained in dellrcsg2TrapObjectImageFileUpgradeResult. The name of the user who originally started the image upgrade is contained in dellrcsg2TrapObjectUserName if available. An empty string is reported if a user name is not available. The type of software image the upgrade result is for is contained in dellrcsg2TrapObjectTypeOfImage. The software image version the RCS attempted to upgrade to is contained in dellrcsg2TrapObjectImageNewVersion. The software image version the RCS is running is contained in dellrcsg2TrapObjectImageCurrentVersion. If the software image upgrade was successful then this version will match the version reported in dellrcsg2TrapObjectImageNewVersion. The port number on the RCS that the power device is attached to is contained in dellrcsg2TrapObjectPduDevicePort. The number of the power device that is connected to a port of the RCS is contained in dellrcsg2TrapObjectPduDeviceNumber. | ||
| NTF dellrcsg2PduCircuitNameChangedTrap | 1.3.6.1.4.1.10418.18.21.0.71 | The name of a power device circuit has changed. The previous name of the power device circuit is contained in dellrcsg2TrapObjectOldName. The new name of the power device circuit is contained in dellrcsg2TrapObjectItemName. The port number on the RCS that the power device is attached to is contained in dellrcsg2TrapObjectPduDevicePort. The number of the power device that is connected to a port of the RCS is contained in dellrcsg2TrapObjectPduDeviceNumber. The circuit of the power device is contained in dellrcsg2TrapObjectPduDeviceCircuit. | ||
| NTF dellrcsg2PduDeviceTotalLoadHighTrap | 1.3.6.1.4.1.10418.18.21.0.72 | A power device attached to the RCS has exceeded the maximum threshold for total load of the device. The port number on the RCS that the power device is attached to is contained in dellrcsg2TrapObjectPduDevicePort. The number of the power device that is connected to a port of the RCS is contained in dellrcsg2TrapObjectPduDeviceNumber. | ||
| NTF dellrcsg2PduCircuitTotalLoadHighTrap | 1.3.6.1.4.1.10418.18.21.0.73 | A power device attached to the RCS has exceeded the maximum threshold for total load of a circuit. The port number on the RCS that the power device is attached to is contained in dellrcsg2TrapObjectPduDevicePort. The number of the power device that is connected to a port of the RCS is contained in dellrcsg2TrapObjectPduDeviceNumber. The circuit of the power device is contained in dellrcsg2TrapObjectPduDeviceCircuit. | ||
| NTF dellrcsg2PduOutletTotalLoadHighTrap | 1.3.6.1.4.1.10418.18.21.0.74 | A power device attached to the RCS has exceeded the maximum threshold for total load of an Outlet. The port number on the RCS that the power device is attached to is contained in dellrcsg2TrapObjectPduDevicePort. The number of the power device that is connected to a port of the RCS is contained in dellrcsg2TrapObjectPduDeviceNumber. The circuit of the power device is contained in dellrcsg2TrapObjectPduOutlet. | ||
| NTF dellrcsg2FanFailureTrap | 1.3.6.1.4.1.10418.18.21.0.75 | A fan failure has ocurred. | ||
| NTF dellrcsg2TemperatureRangeTrap | 1.3.6.1.4.1.10418.18.21.0.76 | Unit temperature outside operating range has been reached. This trap is generated for a high temperature or low temperature which is outside operating range. | ||
| NTF dellrcsg2SmartCardInsertedTrap | 1.3.6.1.4.1.10418.18.21.0.77 | A smart card has been inserted. The name of the user who is connected to the session is contained in dellrcsg2TrapObjectUserName. The session identifier is contained in dellrcsg2TrapObjectSessionIdentifier. The user address is contained in dellrcsg2TrapObjectUserAddress. | ||
| NTF dellrcsg2SmartCardRemovedTrap | 1.3.6.1.4.1.10418.18.21.0.78 | A smart card has been removed. The name of the user who is connected to the session is contained in dellrcsg2TrapObjectUserName. The session identifier is contained in dellrcsg2TrapObjectSessionIdentifier. The user address is contained in dellrcsg2TrapObjectUserAddress. | ||
| dellrcs1082ds | 1.3.6.1.4.1.10418.18.21.17 | |||
| dellrcs2162ds | 1.3.6.1.4.1.10418.18.21.24 | |||
| dellrcs4322ds | 1.3.6.1.4.1.10418.18.21.26 | |||
| dellrcsg2Management | 1.3.6.1.4.1.10418.18.22 | |||
| dellrcsg2TrapObject | 1.3.6.1.4.1.10418.18.22.6 | |||
| STR dellrcsg2TrapObjectUserName | 1.3.6.1.4.1.10418.18.22.6.1 | UTF8String | not-accessible | This object is sent in a trap to identify the name of the user for which the trap condition occured. If the trap condition occurred as a result of activity on the local port (OSD), then the value of this object will be the following string: Local User |
| STR dellrcsg2TrapObjectTargetUserName | 1.3.6.1.4.1.10418.18.22.6.2 | UTF8String | not-accessible | This object is sent in a trap to identify the name of the target user for which a trap condition occurred. |
| STR dellrcsg2TrapObjectImageType | 1.3.6.1.4.1.10418.18.22.6.3 | UTF8String | not-accessible | This object is sent in a trap to identify the type of software image for which the trap condition occured. |
| STR dellrcsg2TrapObjectImageNewVersion | 1.3.6.1.4.1.10418.18.22.6.4 | UTF8String | not-accessible | This object is sent in a trap to identify the version of the new software image the RCS is being upgraded to. |
| STR dellrcsg2TrapObjectImageCurrentVersion | 1.3.6.1.4.1.10418.18.22.6.5 | UTF8String | not-accessible | This object is sent in a trap to identify the version of the software image that the RCS is currently running. |
| STR dellrcsg2TrapObjectSessionIdentifier | 1.3.6.1.4.1.10418.18.22.6.6 | UTF8String | not-accessible | This object is sent in a trap to identify the session for which the trap condition occurred. The value will be the name of a target device if the target device name is known, otherwise the value will be the connection path to a target device. If the value is a connection path it will have the following format: SIP i:Channel c Where i is the ID of the SIP, and c is the tiered switch channel number (0 if there is no switch in the path). |
| STR dellrcsg2TrapObjectSIPId | 1.3.6.1.4.1.10418.18.22.6.7 | UTF8String | not-accessible | This object is sent in a trap to identify the SIP for which the trap condition occurred. |
| STR dellrcsg2TrapObjectTieredSwitchName | 1.3.6.1.4.1.10418.18.22.6.8 | UTF8String | not-accessible | This object is sent in a trap to identify the tiered switch for which the trap condition occurred. |
| STR dellrcsg2TrapObjectOldTieredSwitchName | 1.3.6.1.4.1.10418.18.22.6.9 | UTF8String | not-accessible | This object is sent in a trap to identify the old name of a tiered switch whose name was changed. |
| STR dellrcsg2TrapObjectTargetDeviceName | 1.3.6.1.4.1.10418.18.22.6.10 | UTF8String | not-accessible | This object is sent in a trap to identify the target device for which the trap condition occurred. |
| STR dellrcsg2TrapObjectOldTargetDeviceName | 1.3.6.1.4.1.10418.18.22.6.11 | UTF8String | not-accessible | This object is sent in a trap to identify the old name of a target device whose name was changed. |
| STR dellrcsg2TrapObjectFileName | 1.3.6.1.4.1.10418.18.22.6.12 | DisplayString | not-accessible | This object is sent in a trap to identify the name of a file for which the trap condition occurred. |
| STR dellrcsg2TrapObjectLockReason | 1.3.6.1.4.1.10418.18.22.6.13 | UTF8String | not-accessible | This object is sent in a trap to explain the reason for which a user account has been locked. |
| STR dellrcsg2TrapObjectUnlockReason | 1.3.6.1.4.1.10418.18.22.6.14 | UTF8String | not-accessible | This object is sent in a trap to explain the reason for which a user account has been unlocked. |
| STR dellrcsg2TrapObjectUserAddress | 1.3.6.1.4.1.10418.18.22.6.15 | DisplayString | not-accessible | This object is sent in a trap to identify the user address for which a trap condition occurred. For a remote user, the value is the IPv4 or IPv6 IP address. For a local user, the value is the Local Port of the user. |
| SIP dellrcsg2TrapObjectSIPImageUpgradeResult | 1.3.6.1.4.1.10418.18.22.6.16 | SIPUpgradeResultsEnum | not-accessible | This object is sent in a trap to report the result of a SIP image upgrade. |
| INT dellrcsg2TrapObjectTypeOfImage | 1.3.6.1.4.1.10418.18.22.6.17 | INTEGER | not-accessible | This object is sent in a trap to report the type of software image for which the trap condition occurred. |
| INT dellrcsg2TrapObjectVirtualMediaDriveAccessMode | 1.3.6.1.4.1.10418.18.22.6.18 | INTEGER | not-accessible | This object is sent in a trap to report the access mode associated with a virtual drive for which the trap condition occurred. |
| INT dellrcsg2TrapObjectVirtualMediaDriveType | 1.3.6.1.4.1.10418.18.22.6.19 | INTEGER | not-accessible | This object is sent in a trap to report the type associated with a virtual drive for which the trap condition occurred. |
| IMA dellrcsg2TrapObjectImageFileUpgradeResult | 1.3.6.1.4.1.10418.18.22.6.20 | ImageFileUpgradeResultsEnum | not-accessible | This object is sent in a trap to report the results of a TFTP or ASMP image upgrade. |
| INT dellrcsg2TrapObjectPduDevicePort | 1.3.6.1.4.1.10418.18.22.6.21 | INTEGER | not-accessible | This object is sent in a trap to identify the RCS port that the power device is attached to for which the trap condition occurred. |
| INT dellrcsg2TrapObjectPduOutlet | 1.3.6.1.4.1.10418.18.22.6.22 | INTEGER | not-accessible | This object is sent in a trap to identify the power device outlet number for which the trap condition occurred. |
| STR dellrcsg2TrapObjectOldName | 1.3.6.1.4.1.10418.18.22.6.23 | UTF8String | not-accessible | This object is sent in a trap to identify the old name of a port or power device outlet for which the trap condition occurred. |
| STR dellrcsg2TrapObjectItemName | 1.3.6.1.4.1.10418.18.22.6.24 | UTF8String | not-accessible | This object is sent in a trap to identify the name of a port or power device outlet for which the trap condition occurred. |
| INT dellrcsg2TrapObjectPduDeviceInlet | 1.3.6.1.4.1.10418.18.22.6.25 | INTEGER | not-accessible | This object is sent in a trap to identify the inlet of a power device for which the trap condition occurred. |
| INT dellrcsg2TrapObjectPduDeviceNumber | 1.3.6.1.4.1.10418.18.22.6.26 | INTEGER | not-accessible | This object is sent in a trap to identify the power device number that is attached to a RCS port for which the trap condition occurred. |
| INT dellrcsg2TrapObjectInputPort | 1.3.6.1.4.1.10418.18.22.6.27 | INTEGER | not-accessible | This object is sent in a trap to identify the RCS input port number for which the trap condition occurred. An input port is defined here as an ARI port that interfaces the data traffic coming from or going directly or indirectly to a target device. The values range from 1 to the maximum number of ARI ports. |
| INT dellrcsg2TrapObjectOldInputPort | 1.3.6.1.4.1.10418.18.22.6.28 | INTEGER | not-accessible | This object is sent in a trap to identify the old RCS input port number for which the trap condition occurred. An input port is defined here as an ARI port that interfaces the data traffic coming from or going directly or indirectly to a target device. The values range from 1 to the maximum number of ARI ports. |
| STR dellrcsg2TrapObjectPowerSupply | 1.3.6.1.4.1.10418.18.22.6.29 | DisplayString | not-accessible | This object is sent in a trap to identify the power supply for which the trap condition occurred. |
| STR dellrcsg2TrapObjectPreviousScreenResolution | 1.3.6.1.4.1.10418.18.22.6.30 | DisplayString | not-accessible | This object is sent in a trap to identify the previous screen resolution of the target target device. |
| STR dellrcsg2TrapObjectCurrentScreenResolution | 1.3.6.1.4.1.10418.18.22.6.31 | DisplayString | not-accessible | This object is sent in a trap to identify the current screen resolution of the target server. |
| OCT dellrcsg2TrapObjectAggregatedTargetDeviceStatusChanged | 1.3.6.1.4.1.10418.18.22.6.32 | OCTET STRING | not-accessible | This object is sent in a trap to report server status changes. This object will report the status change of multiple servers (connection paths) in an aggregated encoding format as indicated below. Note that on bootup the RCS will send this object in the dellrcsg2AggregatedTargetDeviceStatusChangedTrap containing the status of all connection paths in the RCS. Thereafter the RCS will send this object in the dellrcsg2AggregatedTargetDeviceStatusChangedTrap containing only the connection paths whose status has changed. This object is composed of two sections, which are the header section and the connection path section. The header section provides version information and is the first 2 bytes of this object. The connection path section provides information on each of the connection paths and is defined in the bytes following the header. Header Section -------------- Byte 1 = Start indicator for the header section. The value of the start indicator is always zero. The value of the start indicator provides means for management applications to determine that this object has a header section. All previous implementations of this object have a non-zero value in the first byte. Byte 2 = Version of the aggregate object. The version provides means to identify the format/structure of this aggregate object. The format of the aggregate object, as described here, is identified with a value of 3 for the version. Connection Path Section ----------------------- The connection path section is composed of 1 or more connection paths. The information for each connection path is packed into 10 bytes as follows: Byte 1 = The RCS input port number associated with this connection path. The input port is an ARI port that interfaces the data traffic coming from or going directly or indirectly to a target device or a power device. Note that a power device will report the port number as 100 + the power device port number. For the first power device port, Byte 1 will report 101 for the power device. This will avoid potential port conflicts for ARI and power device ports. In the event that additional power device ports are available, the number will reflect the power device port number (i.e. 101, 102, etc.) Byte 2 = The tiered switch channel number associated with this connection path. The value will be 0 if a switch channel is not associated with this connection path. For power devices, this Byte will represent the power device number. Byte 3 will contain the outlet number for this connection path. Byte 3 ~ 8 = The EID of the SIP associated with this connection path. Each byte in this field will encode two digits of the SIP's EID number. For example, if the actual EID number on the label attached to a SIP is 520255-0346DC then bytes 3 through 8 would contain the following hex values: Byte 3 = 0x52 Byte 4 = 0x02 Byte 5 = 0x55 Byte 6 = 0x03 Byte 7 = 0x46 Byte 8 = 0xDC Note that the dash character is not represented in the encoded value. For a power device, the first byte (Byte 3) will represent the outlet number and the remaining 5 bytes (Byte 4-8) will be 0. Byte 9 ~ the left most 4 bits = The left most four bits of the 9th byte shall be used to encode / decode the following integer value to represent the power status of a connected server or the power status of a power device outlet. One of the following values can be reported: 1 = Off - The connection path does not have power, which could be the result of the following situation: the SIP is unplugged or the SIP is plugged in but receives no power from the target device. 2 = On - The connection path has power. Byte 9 ~ the right most 4 bits = The right most four bits of the 9th byte shall be used to encode / decode the following integer value to represent the viewer session status of a connection path. For a power device or power device outlet, this value is always 1 since viewer sessions are not supported. One of the following values can be reported: 1 = Idle - There is not a viewer session active on this connection path. 2 = Active - There is an active viewer session on this connection path. 3 = Blocked - The connection path is blocked meaning a viewer session cannot be established to this connection path because of another viewer session is currently using a resource required by this connection path in order to establish a connection path. A viewer session cannot be blocked by a virtual media session. Byte 10 ~ the left most 4 bits = The left most four bits of the 10th byte shall be used to encode / decode the following integer value to represent the virtual media session status of a connection path. For a power device or power device outlet, this value is always 1 since virtual media sessions are not supported. One of the following values can be reported: 1 = Idle - There is not a virtual media session active on this connection path. 2 = Active - There is a virtual media session on this connection path. 3 = Blocked - The connection path is blocked meaning a virtual media session cannot be established to this connection path because of another virtual media session is currently using a resource required by this connection path in order to establish a connection path. A virtual media session cannot be blocked by a viewer session. Byte 10 ~ the right most 4 bits = The right most four bits of the 10th byte shall be used for future use and they will have a value of 0. Every connection path will be packed into this object in 10 byte increments one after the other. The connection paths do not have to be packed in any specific order. Note that the size of this object could conceivably be as large as shown in the following calculation with these assumptions. - 24 channel switch connected to each port of the RCS - 4 power devices connected to RCS, each having 32 outlets (((16 ports X 24 channels) + (4 power devices X 32 power device outlets)) X 10 bytes) + (2 byte Header) = 5122. |
| INT dellrcsg2TrapObjectPduDeviceCircuit | 1.3.6.1.4.1.10418.18.22.6.33 | INTEGER | not-accessible | This object is sent in a trap to identify the circuit of a power device for which the trap condition occurred. |
| STR dellrcsg2TrapObjectSessionType | 1.3.6.1.4.1.10418.18.22.6.34 | DisplayString | not-accessible | This object is sent in a trap to identify the session type for which a trap condition occurred. The value is KVM for a KVM session, or Serial for a Serial session. |
RFC description
Dell Remote Console Switch (RCSG2) trap MIB defining notifications for firmware upgrades and system events.
Start monitoring Dell chassis management controllers with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.