DASAN-MCAST-MIB

All MIBs › DASAN-MCAST-MIB

Organization: dasannetworks, Inc.

Last Updated: 2005-11-08

Category: Multicast

Description: Manages multicast group membership, IGMP snooping, and multicast forwarding on DASAN switches.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is DASAN-MCAST-MIB?

DASAN-MCAST-MIB is a vendor MIB from DASAN Network Solutions covering multicast handling on its switches, including IGMP snooping behavior and multicast group membership/forwarding state. It is expected to expose categories such as per-VLAN or per-port IGMP snooping configuration, learned multicast group membership tables, and multicast forwarding entries reflecting which ports receive traffic for which groups. Its monitoring relevance is chiefly software/control-plane status for multicast services: whether IGMP snooping is correctly learning group memberships and whether forwarding state matches expected subscriber joins, which matters for IPTV or multicast video delivery quality rather than physical hardware sensors. It likely depends conceptually on standard multicast/IGMP concepts (IGMP-MIB, bridge MIB) even if implemented with proprietary object names. It is typically deployed on DASAN access/aggregation switches used by telecom/cable operators delivering IPTV or multicast video services to subscribers. Engineers can download the DASAN-MCAST-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in DASAN-MCAST-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

DASAN Network Solutions access/aggregation switch

Monitoring Examples

No sample objects were available in the source data for this MIB, so a grounded polling example naming real objects cannot be constructed here; based on the module's stated purpose, a realistic use would involve polling IGMP snooping group-membership and forwarding tables per VLAN/port to detect a subscriber port failing to receive an expected multicast video stream, but the exact object names cannot be confirmed from this source.

What Can Be Monitored

IGMP snooping status
multicast group membership
multicast forwarding entries

Imported Objects

From DASAN-SWITCH-MIB

dsSwitchModules

OBJECT-IDENTITY

From IF-MIB

InterfaceIndex
ifIndex	OBJECT-TYPE

From INET-ADDRESS-MIB

InetAddress

From SNMPv2-CONF

NOTIFICATION-GROUP
OBJECT-GROUP

From SNMPv2-SMI

Counter32
Integer32
IpAddress
MODULE-IDENTITY
NOTIFICATION-TYPE
OBJECT-TYPE
Unsigned32

From SNMPv2-TC

RowStatus
TEXTUAL-CONVENTION
TruthValue

OIDs

OID symbolic	OID numeric	Type	Access	Description
T/F dsExplicitTrackingEnabled	1.3.6.1.4.1.6296.9.1.1.2.24.1.1.8	TruthValue	read-write	.
T/F dsFastBlockEnabled	1.3.6.1.4.1.6296.9.1.1.2.24.1.1.3	TruthValue	read-write	The object indicates whether Fast-Block mechanism has been enabled for the system. This object only has effect if the value of dsV3ProcessEnabledOperStatus is 'true'.
T/F dsFastLeaveEnabled	1.3.6.1.4.1.6296.9.1.1.2.24.1.1.2	TruthValue	read-write	This object indicates whether Fast-Leave mechanism has been configured to be enabled in the system. If Fast-Leave is enabled in the switch, IGMP Snooping will prune the port on which an IGMP leave message has been received without waiting for the Group Specific Query to timeout to determine whether there are any more hosts on that port for that group. If the value of dsV3ProcessEnabledOperStatus is 'false', this object will not have any effect.
dsIfConfigEntry	1.3.6.1.4.1.6296.9.1.1.2.24.1.4.1.1		not-accessible	An entry is created for each interface layer two interface.
dsIfConfigInfo	1.3.6.1.4.1.6296.9.1.1.2.24.1.4
dsIfConfigTable	1.3.6.1.4.1.6296.9.1.1.2.24.1.4.1		not-accessible	Table containing configuration information for IGMP Snooping on a layer two interface.
dsIfPortConfigEntry	1.3.6.1.4.1.6296.9.1.1.2.24.1.4.2.1		not-accessible	.
dsIfPortConfigTable	1.3.6.1.4.1.6296.9.1.1.2.24.1.4.2		not-accessible	.
I32 dsIfPortExplicitTrackingMaxhost	1.3.6.1.4.1.6296.9.1.1.2.24.1.4.2.1.1	Integer32	read-write	.
T/F dsIfTopoChangeFloodEnabled	1.3.6.1.4.1.6296.9.1.1.2.24.1.4.1.1.1	TruthValue	read-write	When this object is set to 'true' multicast traffic will be flooded on the port for dsTopoChangeFloodQueryCount of Igmp General Queries upon receiving a Topology Change Notification (TCN) for the VLAN to which the port belongs.
dsIgmpBaseInfo	1.3.6.1.4.1.6296.9.1.1.2.24.2.1
INT dsIgmpGroupCount	1.3.6.1.4.1.6296.9.1.1.2.24.2.1.1	INTEGER	read-only	The count of igmp group entry.
dsIgmpMIBObject	1.3.6.1.4.1.6296.9.1.1.2.24.2
IP dsIgmpQuerierAddress	1.3.6.1.4.1.6296.9.1.1.2.24.1.3.2.1.5	InetAddress	read-only	The object indicates IP address of the IGMP Querier for the VLAN.
T/F dsIgmpQuerierEnabled	1.3.6.1.4.1.6296.9.1.1.2.24.1.3.2.1.2	TruthValue	read-write	The object indicates whether the device will participate in the IGMP Querier election in a VLAN. If the object is set to 'true', the device will participate to an election process to be a Querier. If the object is set to 'false' while the device is acting as the Querier in a VLAN, a new election will be activated to choose a different Querier.
dsIgmpQuerierEntry	1.3.6.1.4.1.6296.9.1.1.2.24.1.3.2.1		not-accessible	An entry is created for each active VLAN in the device and contains IGMP Querier configuration information related to IGMP Snooping for that VLAN. An entry is deleted when the VLAN becomes inactive.
NUM dsIgmpQuerierPort	1.3.6.1.4.1.6296.9.1.1.2.24.1.3.2.1.6	InterfaceIndex	read-only	The object indicates the interface on which IGMP Querier is detected for the VLAN. The value of this object is zero if the device itself is acting as IGMP Querier for the VLAN.
INT dsIgmpQuerierState	1.3.6.1.4.1.6296.9.1.1.2.24.1.3.2.1.3	INTEGER	read-only	The object indicates the current state of the device as an IGMP Querier in a VLAN. disabled(1) : Querier function is disabled for this device in this VLAN. electing(2) : The device is in the election process of the Querier. querier(3) : The device is the current Querier in this VLAN. nonQuerier(4): The device has lost the election process of the Querier. inactive(5) : VLAN is inactive or not an Ethernet VLAN.
dsIgmpQuerierTable	1.3.6.1.4.1.6296.9.1.1.2.24.1.3.2		not-accessible	Table containing information regarding the IGMP Querier in the VLAN. The device can be configured to be the IGMP Querier for the VLAN. An IGMP Querier for the VLAN is selected by using a Querier Election process.
DSI dsIgmpQuerierVersion	1.3.6.1.4.1.6296.9.1.1.2.24.1.3.2.1.4	DsIgmpVersion	read-only	The object indicates IGMP version of the Querier for the VLAN. IGMP version of the Querier is determined by the type of IGMP General Query received by the device.
INT dsIgmpQuerierVlanIndex	1.3.6.1.4.1.6296.9.1.1.2.24.1.3.2.1.1	INTEGER	not-accessible	The object indicates the VLAN that the Querier will send IGMP queries on.
NTF dsIgmpSnoopingChanged	1.3.6.1.4.1.6296.9.1.1.2.24.0.1			A dsIgmpSnoopingEnableChanged should be generated when Igmp Snooping is enable or disable
T/F dsIgmpSnoopingEnabled	1.3.6.1.4.1.6296.9.1.1.2.24.1.1.1	TruthValue	read-write	This object indicates whether IGMP Snooping has been enabled for the system.
INT dsIgmpSnoopingGroupCount	1.3.6.1.4.1.6296.9.1.1.2.24.1.1.9	INTEGER	read-only	The count of igmp snooping group entry.
dsIgmpSnoopingMIBObject	1.3.6.1.4.1.6296.9.1.1.2.24.1
NTF dsIgmpSnoopingVlanChanged	1.3.6.1.4.1.6296.9.1.1.2.24.0.2			A dsIgmpSnoopingVlanChanged should be generated when Igmp Snooping Vlan is enable or disable
IP dsIgmpStaticGroupAddress	1.3.6.1.4.1.6296.9.1.1.2.24.2.2.1.1.1	IpAddress	read-write	.
dsIgmpStaticGroupEntry	1.3.6.1.4.1.6296.9.1.1.2.24.2.2.1.1		not-accessible	.
dsIgmpStaticGroupInfo	1.3.6.1.4.1.6296.9.1.1.2.24.2.2
INT dsIgmpStaticGroupPort	1.3.6.1.4.1.6296.9.1.1.2.24.2.2.1.1.3	INTEGER	read-write	.
IP dsIgmpStaticGroupReporter	1.3.6.1.4.1.6296.9.1.1.2.24.2.2.1.1.4	IpAddress	read-write	.
dsIgmpStaticGroupTable	1.3.6.1.4.1.6296.9.1.1.2.24.2.2.1		not-accessible	.
INT dsIgmpStaticGroupVlanID	1.3.6.1.4.1.6296.9.1.1.2.24.2.2.1.1.2	INTEGER	read-write	.
dsInterfaceStatsEntry	1.3.6.1.4.1.6296.9.1.1.2.24.1.2.1.1		not-accessible	An entry contains statistics information for a specific IGMP Snooping capable interface. It provides information about IGMP messages and reports that have been transmitted and received at the interface.
dsInterfaceStatsTable	1.3.6.1.4.1.6296.9.1.1.2.24.1.2.1		not-accessible	Table contains statistics information for IGMP snooping. An entry appears in this table for each IGMP Snooping capable interface in the device.
dsMcastGroup	1.3.6.1.4.1.6296.9.1.1.2.24.3			Description.
IP dsMcastGroupAddress	1.3.6.1.4.1.6296.9.1.1.2.24.1.6.1.1.2	InetAddress	not-accessible	This object indicates IP multicast address learned by IGMP Snooping.
dsMcastGroupEntry	1.3.6.1.4.1.6296.9.1.1.2.24.1.6.1.1		not-accessible	An entry is created by IGMP Snooping for each group learned in the VLAN.
INT dsMcastGroupFilterMode	1.3.6.1.4.1.6296.9.1.1.2.24.1.6.1.1.4	INTEGER	read-only	This object indicates a the IGMP filter mode for the group. include(1) : reception of multicast packets sent to the group specified by cisMcastGroupAddress is requested only from the specified IPv4 source addresses listed in the IGMPv3 Membership Reports. exclude(2) : reception of multicast packets sent to the group specified by cisMcastGroupAddress is requested from all except from the list of IPv4 source addresses specified in the IGMPv3 Membership Reports. The filter mode is determined by the type of Group Record received in the IGMP Membership Report received by the device. Groups for which IGMPv1/v2 Membership Reports are received are considered to have a cisMcastGroupFilterMode of 'exclude'.
DSI dsMcastGroupIgmpVersion	1.3.6.1.4.1.6296.9.1.1.2.24.1.6.1.1.5	DsIgmpVersion	read-only	This object indicates the IGMP version for the group. This is determined by the type of IGMP Membership Report received by the device.
INT dsMcastGroupPortIndex	1.3.6.1.4.1.6296.9.1.1.2.24.1.6.1.1.3	INTEGER	read-only	This object indicates the set of ports on which IGMP Membership Reports are received for the group indicating interest to receive traffic sent to the group.
dsMcastGroupTable	1.3.6.1.4.1.6296.9.1.1.2.24.1.6.1		not-accessible	Table containing multicast group address information for IGMP Snooping.
INT dsMcastGroupVlanIndex	1.3.6.1.4.1.6296.9.1.1.2.24.1.6.1.1.1	INTEGER	not-accessible	This object indicates the VLAN in which the group is learned.
IP dsMcastIgmpGroupAddress	1.3.6.1.4.1.6296.9.1.1.2.24.1.6.2.1.2	IpAddress	read-only	.
dsMcastIgmpGroupEntry	1.3.6.1.4.1.6296.9.1.1.2.24.1.6.2.1		not-accessible	An entry is created by IGMP Snooping for each group learned in the VLAN.
I32 dsMcastIgmpGroupExpire	1.3.6.1.4.1.6296.9.1.1.2.24.1.6.2.1.8	Integer32	read-only	.
DSI dsMcastIgmpGroupFilterMode	1.3.6.1.4.1.6296.9.1.1.2.24.1.6.2.1.7	DsIgmpFilterMode	read-only	.
INT dsMcastIgmpGroupPortIndex	1.3.6.1.4.1.6296.9.1.1.2.24.1.6.2.1.4	INTEGER	read-only	.
IP dsMcastIgmpGroupReporter	1.3.6.1.4.1.6296.9.1.1.2.24.1.6.2.1.5	IpAddress	read-only	.
IP dsMcastIgmpGroupSource	1.3.6.1.4.1.6296.9.1.1.2.24.1.6.2.1.3	IpAddress	read-only	.
INT dsMcastIgmpGroupState	1.3.6.1.4.1.6296.9.1.1.2.24.2.2.1.1.5	INTEGER	read-write	.
ROW dsMcastIgmpGroupStatus	1.3.6.1.4.1.6296.9.1.1.2.24.2.2.1.1.10	RowStatus	read-create	.
dsMcastIgmpGroupTable	1.3.6.1.4.1.6296.9.1.1.2.24.1.6.2		not-accessible	Table containing multicast group address information for IGMP Snooping.
DSI dsMcastIgmpGroupVersion	1.3.6.1.4.1.6296.9.1.1.2.24.1.6.2.1.6	DsIgmpVersion	read-only	.
INT dsMcastIgmpGroupVlanIndex	1.3.6.1.4.1.6296.9.1.1.2.24.1.6.2.1.1	INTEGER	read-only	.
dsMcastMIB	1.3.6.1.4.1.6296.9.1.1.2.24			The MIB module for Multicast Feature.
dsMcastNotification	1.3.6.1.4.1.6296.9.1.1.2.24.0
dsMcastNotificationGroup	1.3.6.1.4.1.6296.9.1.1.2.24.4			Description.
dsMcastRouterCfgEntry	1.3.6.1.4.1.6296.9.1.1.2.24.1.5.1.1		not-accessible	An entry is created for each interface in the VLAN that is either learned or configured as multicast router port.
dsMcastRouterCfgTable	1.3.6.1.4.1.6296.9.1.1.2.24.1.5.1		not-accessible	Table containing multicast router configuration information for IGMP Snooping.
INT dsMcastRouterPortIndex	1.3.6.1.4.1.6296.9.1.1.2.24.1.5.1.1.1	INTEGER	not-accessible	Description.
ROW dsMcastRouterRowStatus	1.3.6.1.4.1.6296.9.1.1.2.24.1.5.1.1.4	RowStatus	read-create	This object is a conceptual row entry that allows to add or delete entries to or from the dsMcastRouterCfgTable. When creating an entry in this table 'createAndGo' method is used and the value of this object is set to 'active'. Deactivation of an 'active' entry is not allowed. When deleting an entry in this table 'destroy' method is used.
INT dsMcastRouterType	1.3.6.1.4.1.6296.9.1.1.2.24.1.5.1.1.3	INTEGER	read-only	This object indicates if the multicast router port is a configured (static) or learned (dynamic) port.
INT dsMcastRouterVlanIndex	1.3.6.1.4.1.6296.9.1.1.2.24.1.5.1.1.2	INTEGER	not-accessible	This object indicates the VLAN to which the multicast router port belongs.
INT dsMrouteJoinedCount	1.3.6.1.4.1.6296.9.1.1.2.24.1.1.10	INTEGER	read-only	The count of Mroute Joined channel.
dsMulticastGroupInfo	1.3.6.1.4.1.6296.9.1.1.2.24.1.6
dsMulticastRouterInfo	1.3.6.1.4.1.6296.9.1.1.2.24.1.5
T/F dsReportSuppressionEnabled	1.3.6.1.4.1.6296.9.1.1.2.24.1.1.4	TruthValue	read-write	When this object is set to 'true', IGMP Snooping will suppress duplicate IGMP Reports. When this object is set to 'false', all IGMP Reports are forwarded to all multicast routers in the VLAN.
C32 dsRxGeneralQueries	1.3.6.1.4.1.6296.9.1.1.2.24.1.2.1.1.5	Counter32	read-only	Total IGMP General Queries that have been received at an interface.
C32 dsRxGroupSpecificQueries	1.3.6.1.4.1.6296.9.1.1.2.24.1.2.1.1.6	Counter32	read-only	Total IGMP Group-Specific Queries that have been received at an interface.
C32 dsRxInvalidPackets	1.3.6.1.4.1.6296.9.1.1.2.24.1.2.1.1.10	Counter32	read-only	Total packets those are not valid IGMP messages received at an interface.
C32 dsRxLeaves	1.3.6.1.4.1.6296.9.1.1.2.24.1.2.1.1.8	Counter32	read-only	Total IGMP Leave messages that have been received at an interface.
C32 dsRxOtherPackets	1.3.6.1.4.1.6296.9.1.1.2.24.1.2.1.1.11	Counter32	read-only	Total non IGMP messages messages that have been received at an interface, comprising cgmp join, pim hello, dvmrp and mospf messages.
C32 dsRxReports	1.3.6.1.4.1.6296.9.1.1.2.24.1.2.1.1.7	Counter32	read-only	Total IGMP Membership Reports that have been received at an interface.
C32 dsRxTopoNotifications	1.3.6.1.4.1.6296.9.1.1.2.24.1.2.1.1.12	Counter32	read-only	Total Topology Change Notifications that have been received at an interface.
C32 dsRxValidPackets	1.3.6.1.4.1.6296.9.1.1.2.24.1.2.1.1.9	Counter32	read-only	Total valid IGMP packets have been received at an interface.
dsStatisticsInfo	1.3.6.1.4.1.6296.9.1.1.2.24.1.2
dsSystemInfo	1.3.6.1.4.1.6296.9.1.1.2.24.1.1
U32 dsTopoChangeFloodQueryCount	1.3.6.1.4.1.6296.9.1.1.2.24.1.1.5	Unsigned32	read-write	This object specifies the flooding period for multicast traffic upon receiving Topology Change Notifications (TCN). IGMP Snooping will flood multicast traffic until dsTopoChangeFloodQueryCount number of IGMP General Queries are received by IGMP Snooping.
T/F dsTopoChangeQuerySolicitEnabled	1.3.6.1.4.1.6296.9.1.1.2.24.1.1.6	TruthValue	read-write	This object specifies whether the device running IGMP Snooping will solicit IGMP General Queries from the Querier upon receiving a Topology Change Notification (TCN). The root device will always solicit IGMP General Queries on TCN irrespective of the value of dsTopoChangeQuerySolicitEnabled.
C32 dsTxGeneralQueries	1.3.6.1.4.1.6296.9.1.1.2.24.1.2.1.1.1	Counter32	read-only	Total IGMP General Queries that have been transmitted through an interface.
C32 dsTxGroupSpecificQueries	1.3.6.1.4.1.6296.9.1.1.2.24.1.2.1.1.2	Counter32	read-only	Total IGMP Group-Specific Queries that have been transmitted through an interface.
C32 dsTxLeaves	1.3.6.1.4.1.6296.9.1.1.2.24.1.2.1.1.4	Counter32	read-only	Total IGMP Leave messages that have been transmitted through an interface.
C32 dsTxReports	1.3.6.1.4.1.6296.9.1.1.2.24.1.2.1.1.3	Counter32	read-only	Total IGMP Membership Reports that have been transmitted through an interface.
C32 dsV3Allows	1.3.6.1.4.1.6296.9.1.1.2.24.1.2.1.1.13	Counter32	read-only	Number of Source-List-Change records with the record type ALLOW_NEW_SOURCES that have been sent from hosts connected to an interface. This record type indicates that the Source Address fields in this Group Record contain a list of additional sources that the system wishes to hear from, for packets sent to the specified multicast address.
C32 dsV3Blocks	1.3.6.1.4.1.6296.9.1.1.2.24.1.2.1.1.14	Counter32	read-only	Number of Source-List-Change records with the record type BLOCK_OLD_SOURCE that have been sent from hosts connected to an interface. This record type indicates that the Source Address fields in this Group Record contain a list of the sources that the system no longer wishes to hear from, for packets sent to the specified multicast address.
C32 dsV3IsExcluded	1.3.6.1.4.1.6296.9.1.1.2.24.1.2.1.1.16	Counter32	read-only	Number of Current-State records with the state MODE_IS_EXCLUDE that have been sent from hosts in response to a Query received at an interfaces. This state indicates that the interface has a filter mode of EXCLUDE for the specified multicast address.
C32 dsV3IsIncluded	1.3.6.1.4.1.6296.9.1.1.2.24.1.2.1.1.15	Counter32	read-only	Number of Current-State records with the state MODE_IS_INCLUDE that have been sent from hosts in response to a Query received at an interface. This state indicates that the interface has a filter mode of INCLUDE for the specified multicast address.
INT dsV3SnoopingSupport	1.3.6.1.4.1.6296.9.1.1.2.24.1.1.7	INTEGER	read-only	This object indicates IGMP Snooping support for IGMPv3 as described below: basic(1): Basic support for IGMPv3. IGMPv3 packets are processed similar to IGMPv2 packets. In other words Source list information is not used. Although this does not break multicast traffic to IGMPv3 hosts, it does not provide any other benefits such as Fast Leave for IGMPv3 hosts, Explicit Host Tracking and Source based filtering. full(2): Full support for IGMPv3. Provides full IGMPv3 Snooping support. This includes processing of IGMPv3 source list information along with group information. Provides support for features such as Fast Leave, Explicit Host Tracking and Proxy Reporting and a potential to do Source based filtering.
C32 dsV3ToExcluded	1.3.6.1.4.1.6296.9.1.1.2.24.1.2.1.1.18	Counter32	read-only	Number of Filter-Mode-Change records with the record type CHANGE_TO_EXCLUDE_MODE that have been sent through an interface. This type of record indicates that the filter mode has been changed to EXCLUDE mode for the specified multicast address, and the Source Address fields in this Group Record will contain the new source list for the specified multicast address, if it is not empty.
C32 dsV3ToIncluded	1.3.6.1.4.1.6296.9.1.1.2.24.1.2.1.1.17	Counter32	read-only	Number of Filter-Mode-Change records with the record type CHANGE_TO_INCLUDE_MODE that have been sent through an interface. This type of record indicates that the filter mode has been changed to INCLUDE mode for the specified multicast address, and the Source Address fields in this Group Record will contain the new source list for the specified multicast address, if it is not empty.
dsVlanConfigEntry	1.3.6.1.4.1.6296.9.1.1.2.24.1.3.1.1		not-accessible	An entry is created for each active VLAN in the device and deleted when the VLAN becomes inactive.
dsVlanConfigInfo	1.3.6.1.4.1.6296.9.1.1.2.24.1.3
dsVlanConfigTable	1.3.6.1.4.1.6296.9.1.1.2.24.1.3.1		not-accessible	Table contains VLAN based configuration information for IGMP Snooping.
T/F dsVlanExplicitTrackingEnabled	1.3.6.1.4.1.6296.9.1.1.2.24.1.3.1.1.6	TruthValue	read-write	.
T/F dsVlanFastBlockEnabled	1.3.6.1.4.1.6296.9.1.1.2.24.1.3.1.1.4	TruthValue	read-write	Description.
T/F dsVlanFastLeaveEnabled	1.3.6.1.4.1.6296.9.1.1.2.24.1.3.1.1.3	TruthValue	read-write	This object specifies whether Fast-Leave mechanism (also known as Immediate-Leave) is to be performed by IGMP Snooping or not. When enabled, IGMP Snooping will remove the interface from the group mentioned in the IGMP Leave message received on that interface without waiting for the IGMP Group-Specific Query to timeout to determine whether there are any more hosts on that interface for that group.
INT dsVlanID	1.3.6.1.4.1.6296.9.1.1.2.24.1.3.1.1.1	INTEGER	accessible-for-notify	This object indicates the VLAN in which IGMP Snooping is configured.
T/F dsVlanIgmpSnoopingEnabled	1.3.6.1.4.1.6296.9.1.1.2.24.1.3.1.1.2	TruthValue	read-write	When this object is set to 'true' IGMP Snooping is enabled on this VLAN else disabled.
T/F dsVlanSnoopingLearningModePim	1.3.6.1.4.1.6296.9.1.1.2.24.1.3.1.1.5	TruthValue	read-write	Description.

RFC description

Dasan Networks multicast IGMP snooping configuration and management MIB.

Start monitoring DASAN Network Solutions access/aggregation switch (multicast/IGMP) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download DASAN-MCAST-MIB

What Is DASAN-MCAST-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description