All MIBs › MULTICAST-MIB
Organization: Quanta Computer Inc.
Last Updated: 2011-08-31
Category: Multicast
Description: Manages Quanta Computer multicast routing configuration, groups, and forwarding.
Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.
What Is MULTICAST-MIB?
MULTICAST-MIB, in this instance, is a Quanta Computer proprietary MIB described as part of a Multicast Routing Flex package for Quanta's networking switch products, covering multicast routing configuration, group membership, and forwarding behavior on the switch. Because the sample object list only contains a placeholder value rather than real object names, the specific object structure cannot be confirmed from the available data, but based on the short description it would expose multicast group and forwarding-table style data. Its monitoring value would typically include multicast group membership state and forwarding table entries, which is a networking/software-status function revealing which multicast groups are active and how traffic is being forwarded across switch ports. As a multicast MIB it likely depends conceptually on IETF IGMP/PIM multicast standards even though this is a vendor-specific implementation. It would be deployed on Quanta Computer network switches in data-center environments running multicast applications such as IPTV or clustered storage replication traffic, and administrators can download the MULTICAST-MIB file to load it into their MIB browser to confirm the exposed objects before deployment.
IPNetwork Monitor allows you to monitor SNMP objects defined in MULTICAST-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.
Supported Devices
- Quanta Computer network switches
Monitoring Examples
No usable sample object names were provided for this MIB (only a placeholder value), so no concrete objects can be cited from the source data. A multicast routing MIB of this kind would typically expose a multicast group membership table and a forwarding table that an administrator would poll to verify which switch ports are forwarding a given multicast group and to detect unexpected multicast flooding, but this cannot be grounded in real object names here.
What Can Be Monitored
- multicast group membership
- multicast forwarding table entries
- multicast routing configuration
This MIB depends on
Related MIBs
Imported Objects
From IF-MIB
| InterfaceIndex |
From INET-ADDRESS-MIB
| InetAddress | |
| InetAddressType |
From IPV6-TC
| Ipv6Address |
From QUANTA-SWITCH-MIB
| quanta | MODULE-IDENTITY |
| switch | OBJECT-IDENTITY |
From SNMPv2-SMI
| Integer32 | |
| IpAddress | |
| MODULE-IDENTITY | |
| OBJECT-TYPE | |
| Unsigned32 |
From SNMPv2-TC
| RowStatus |
OIDs
| OID symbolic | OID numeric | Type | Access | Description |
|---|---|---|---|---|
| agentIpStaticMRouteEntry | 1.3.6.1.4.1.7244.2.4.13.1 | not-accessible | Information about a table entry. | |
| NUM agentIpStaticMRouteIfIndex | 1.3.6.1.4.1.7244.2.4.13.1.5 | InterfaceIndex | read-create | The interface index is valid only for IPv6 and only if RPF address is link-local. |
| I32 agentIpStaticMRoutePreference | 1.3.6.1.4.1.7244.2.4.13.1.6 | Integer32 | read-create | The preference of this route entry. |
| IP agentIpStaticMRouteRpfIpAddr | 1.3.6.1.4.1.7244.2.4.13.1.4 | InetAddress | read-create | The RPF Address. |
| IPt agentIpStaticMRouteSrcAddressType | 1.3.6.1.4.1.7244.2.4.13.1.1 | InetAddressType | not-accessible | The address type of this Multicast data source. |
| IP agentIpStaticMRouteSrcIpAddr | 1.3.6.1.4.1.7244.2.4.13.1.2 | InetAddress | not-accessible | The address of the Multicast data source. |
| I32 agentIpStaticMRouteSrcNetMask | 1.3.6.1.4.1.7244.2.4.13.1.3 | Integer32 | not-accessible | The network mask for the IP address of the Multicast data source. |
| ROW agentIpStaticMRouteStatus | 1.3.6.1.4.1.7244.2.4.13.1.7 | RowStatus | read-create | The preference of this route entry. |
| agentIpStaticMRouteTable | 1.3.6.1.4.1.7244.2.4.13 | not-accessible | The table listing the Static Multicast Route Entries. | |
| agentMulticastAdminBoundaryConfigGroup | 1.3.6.1.4.1.7244.2.4.11 | |||
| agentMulticastAdminBoundaryEntry | 1.3.6.1.4.1.7244.2.4.11.1.1 | not-accessible | Allows configuration of parameters not provided in the standard PIM-MIB. | |
| IP agentMulticastAdminBoundaryGroupAddress | 1.3.6.1.4.1.7244.2.4.11.1.1.2 | IpAddress | read-create | The preference value for the local interface as a Candidate Rendezvous Point. The value of -1 is used to indicate that the local interface is not a Candidate RP interface. |
| IP agentMulticastAdminBoundaryGroupMask | 1.3.6.1.4.1.7244.2.4.11.1.1.3 | IpAddress | read-create | The preference value for the local interface as a Candidate Rendezvous Point. The value of -1 is used to indicate that the local interface is not a Candidate RP interface. |
| U32 agentMulticastAdminBoundaryIndex | 1.3.6.1.4.1.7244.2.4.11.1.1.1 | Unsigned32 | read-create | The BSR hash mask length to be advertised in bootstrap messages if this interface is elected as the bootstrap router. This hash mask length will be used in the hash algorith for selecting the RP for a particular group. |
| INT agentMulticastAdminBoundaryStatus | 1.3.6.1.4.1.7244.2.4.11.1.1.4 | INTEGER | read-create | The preference value for the local interface as a Candidate Rendezvous Point. The value of -1 is used to indicate that the local interface is not a Candidate RP interface. |
| agentMulticastAdminBoundaryTable | 1.3.6.1.4.1.7244.2.4.11.1 | not-accessible | Provides Per-Interface configuration of PIM-DM. | |
| INT agentMulticastDVMRPAdminMode | 1.3.6.1.4.1.7244.2.4.6.1 | INTEGER | read-write | This enables or disables DVMRP on the system. |
| agentMulticastDVMRPConfigGroup | 1.3.6.1.4.1.7244.2.4.6 | |||
| INT agentMulticastDVMRPInterfaceAdminMode | 1.3.6.1.4.1.7244.2.4.6.2.1.2 | INTEGER | read-write | This enables or disables DVMRP on this interface. |
| agentMulticastDVMRPInterfaceEntry | 1.3.6.1.4.1.7244.2.4.6.2.1 | not-accessible | Information about a table entry. | |
| I32 agentMulticastDVMRPInterfaceGenerationId | 1.3.6.1.4.1.7244.2.4.6.2.1.4 | Integer32 | read-only | DVMRP Generation Id on this interface. The value of -1 is used to indicate NULL. |
| I32 agentMulticastDVMRPInterfaceIfIndex | 1.3.6.1.4.1.7244.2.4.6.2.1.1 | Integer32 | read-only | Identifies the external interface number. |
| I32 agentMulticastDVMRPInterfaceMetric | 1.3.6.1.4.1.7244.2.4.6.2.1.3 | Integer32 | read-write | DVMRP metric on this interface. |
| agentMulticastDVMRPInterfaceTable | 1.3.6.1.4.1.7244.2.4.6.2 | not-accessible | Provides Per-Interface configuration of IGMP. | |
| INT agentMulticastIGMPAdminMode | 1.3.6.1.4.1.7244.2.4.1.1 | INTEGER | read-write | This enables or disables IGMP on the system. |
| agentMulticastIGMPConfigGroup | 1.3.6.1.4.1.7244.2.4.1 | |||
| INT agentMulticastIGMPInterfaceAdminMode | 1.3.6.1.4.1.7244.2.4.1.2.1.2 | INTEGER | read-write | This enables or disables IGMP on this interface. |
| agentMulticastIGMPInterfaceEntry | 1.3.6.1.4.1.7244.2.4.1.2.1 | not-accessible | Information about a table entry. | |
| I32 agentMulticastIGMPInterfaceIfIndex | 1.3.6.1.4.1.7244.2.4.1.2.1.1 | Integer32 | read-only | Identifies the external interface number. |
| agentMulticastIGMPInterfaceTable | 1.3.6.1.4.1.7244.2.4.1.2 | not-accessible | Provides Per-Interface configuration of IGMP. | |
| INT agentMulticastIGMPProxyInterfaceAdminMode | 1.3.6.1.4.1.7244.2.4.1.3.1.2 | INTEGER | read-write | This enables or disables IGMP proxy on this interface. |
| agentMulticastIGMPProxyInterfaceEntry | 1.3.6.1.4.1.7244.2.4.1.3.1 | not-accessible | Information about a table entry. | |
| I32 agentMulticastIGMPProxyInterfaceIfIndex | 1.3.6.1.4.1.7244.2.4.1.3.1.1 | Integer32 | read-only | Identifies the external interface number. |
| I32 agentMulticastIGMPProxyInterfaceInterval | 1.3.6.1.4.1.7244.2.4.1.3.1.3 | Integer32 | read-write | IGMP proxy interval on this interface. |
| agentMulticastIGMPProxyInterfaceTable | 1.3.6.1.4.1.7244.2.4.1.3 | not-accessible | Provides Per-Interface configuration of IGMP. | |
| INT agentMulticastIPv6PIMDMAdminMode | 1.3.6.1.4.1.7244.2.4.10.1 | INTEGER | read-write | This enables or disables PIM Dense Mode on the system. |
| agentMulticastIPv6PIMDMConfigGroup | 1.3.6.1.4.1.7244.2.4.10 | |||
| agentMulticastIPv6PIMDMInterfaceEntry | 1.3.6.1.4.1.7244.2.4.10.2.1 | not-accessible | Allows configuration of parameters not provided in the standard PIM-MIB. | |
| I32 agentMulticastIPv6PIMDMInterfaceHelloInterval | 1.3.6.1.4.1.7244.2.4.10.2.1.3 | Integer32 | read-write | The hello interval of PIM Dense. |
| U32 agentMulticastIPv6PIMDMInterfaceIndex | 1.3.6.1.4.1.7244.2.4.10.2.1.1 | Unsigned32 | not-accessible | Routing Interface associated with this PIM DM configuration entry. |
| INT agentMulticastIPv6PIMDMInterfaceMode | 1.3.6.1.4.1.7244.2.4.10.2.1.2 | INTEGER | read-write | This enables or disables PIM Dense Interface Mode on the system. |
| agentMulticastIPv6PIMDMInterfaceTable | 1.3.6.1.4.1.7244.2.4.10.2 | not-accessible | Provides Per-Interface configuration of PIM-DM. | |
| INT agentMulticastIPv6PIMSMAdminMode | 1.3.6.1.4.1.7244.2.4.9.1 | INTEGER | read-write | This enables or disables PIM Sparse Mode on the system. |
| ADR agentMulticastIPv6PIMSMCandRPAddress | 1.3.6.1.4.1.7244.2.4.9.8.1.1 | Ipv6Address | read-create | The BSR hash mask length to be advertised in bootstrap messages if this interface is elected as the bootstrap router. This hash mask length will be used in the hash algorith for selecting the RP for a particular group. |
| agentMulticastIPv6PIMSMCandRPEntry | 1.3.6.1.4.1.7244.2.4.9.8.1 | not-accessible | Allows configuration of parameters not provided in the standard PIM-MIB. | |
| ADR agentMulticastIPv6PIMSMCandRPGroupAddress | 1.3.6.1.4.1.7244.2.4.9.8.1.2 | Ipv6Address | read-create | The preference value for the local interface as a Candidate Rendezvous Point. The value of -1 is used to indicate that the local interface is not a Candidate RP interface. |
| U32 agentMulticastIPv6PIMSMCandRPGroupPrefixLength | 1.3.6.1.4.1.7244.2.4.9.8.1.3 | Unsigned32 | read-create | The preference value for the local interface as a Candidate Rendezvous Point. The value of -1 is used to indicate that the local interface is not a Candidate RP interface. |
| INT agentMulticastIPv6PIMSMCandRPStatus | 1.3.6.1.4.1.7244.2.4.9.8.1.4 | INTEGER | read-create | The preference value for the local interface as a Candidate Rendezvous Point. The value of -1 is used to indicate that the local interface is not a Candidate RP interface. |
| agentMulticastIPv6PIMSMCandRPTable | 1.3.6.1.4.1.7244.2.4.9.8 | not-accessible | Provides Per-Interface configuration of PIM-SM. | |
| agentMulticastIPv6PIMSMCBSRInterfaceEntry | 1.3.6.1.4.1.7244.2.4.9.5.1 | not-accessible | Allows configuration of parameters not provided in the standard PIM-MIB. | |
| U32 agentMulticastIPv6PIMSMCBSRInterfaceHashMaskLength | 1.3.6.1.4.1.7244.2.4.9.5.1.2 | Unsigned32 | read-write | The BSR hash mask length to be advertised in bootstrap messages if this interface is elected as the bootstrap router. This hash mask length will be used in the hash algorith for selecting the RP for a particular group. |
| U32 agentMulticastIPv6PIMSMCBSRInterfaceIndex | 1.3.6.1.4.1.7244.2.4.9.5.1.1 | Unsigned32 | not-accessible | Routing Interface associated with this PIM SM configuration entry. |
| I32 agentMulticastIPv6PIMSMCBSRInterfacePriority | 1.3.6.1.4.1.7244.2.4.9.5.1.3 | Integer32 | read-write | The preference value for the local interface as a Candidate Rendezvous Point. The value of -1 is used to indicate that the local interface is not a Candidate RP interface. |
| agentMulticastIPv6PIMSMCBSRInterfaceTable | 1.3.6.1.4.1.7244.2.4.9.5 | not-accessible | Provides Per-Interface configuration of PIM-SM. | |
| agentMulticastIPv6PIMSMConfigGroup | 1.3.6.1.4.1.7244.2.4.9 | |||
| I32 agentMulticastIPv6PIMSMDataThresholdRate | 1.3.6.1.4.1.7244.2.4.9.2 | Integer32 | read-write | Specifies the minimum rate in Kbits/sec for the last hop router to initiate switching to the shortest path. |
| INT agentMulticastIPv6PIMSMInterfaceAdminMode | 1.3.6.1.4.1.7244.2.4.9.7.1.2 | INTEGER | read-write | This enables or disables PIM Dense Mode on the system. |
| INT agentMulticastIPv6PIMSMInterfaceBsrBorder | 1.3.6.1.4.1.7244.2.4.9.7.1.5 | INTEGER | read-write | This enables or disables PIM Dense Mode on the system. |
| U32 agentMulticastIPv6PIMSMInterfaceDrPriority | 1.3.6.1.4.1.7244.2.4.9.7.1.6 | Unsigned32 | read-write | The preference value for the local interface as a Candidate Rendezvous Point. The value of -1 is used to indicate that the local interface is not a Candidate RP interface. |
| agentMulticastIPv6PIMSMInterfaceEntry | 1.3.6.1.4.1.7244.2.4.9.7.1 | not-accessible | Allows configuration of parameters not provided in the standard PIM-MIB. | |
| U32 agentMulticastIPv6PIMSMInterfaceHelloInterval | 1.3.6.1.4.1.7244.2.4.9.7.1.3 | Unsigned32 | read-write | The BSR hash mask length to be advertised in bootstrap messages if this interface is elected as the bootstrap router. This hash mask length will be used in the hash algorith for selecting the RP for a particular group. |
| U32 agentMulticastIPv6PIMSMInterfaceIndex | 1.3.6.1.4.1.7244.2.4.9.7.1.1 | Unsigned32 | not-accessible | Routing Interface associated with this PIM SM configuration entry. |
| U32 agentMulticastIPv6PIMSMInterfaceJoinPruneInterval | 1.3.6.1.4.1.7244.2.4.9.7.1.4 | Unsigned32 | read-write | The preference value for the local interface as a Candidate Rendezvous Point. The value of -1 is used to indicate that the local interface is not a Candidate RP interface. |
| agentMulticastIPv6PIMSMInterfaceTable | 1.3.6.1.4.1.7244.2.4.9.7 | not-accessible | Provides Per-Interface configuration of PIM-SM. | |
| agentMulticastIPv6PIMSMSSMEntry | 1.3.6.1.4.1.7244.2.4.9.6.1 | not-accessible | Allows configuration of parameters not provided in the standard PIM-MIB. | |
| ADR agentMulticastIPv6PIMSMSSMGroupAddress | 1.3.6.1.4.1.7244.2.4.9.6.1.1 | Ipv6Address | read-create | The BSR hash mask length to be advertised in bootstrap messages if this interface is elected as the bootstrap router. This hash mask length will be used in the hash algorith for selecting the RP for a particular group. |
| U32 agentMulticastIPv6PIMSMSSMGroupMask | 1.3.6.1.4.1.7244.2.4.9.6.1.2 | Unsigned32 | read-create | The preference value for the local interface as a Candidate Rendezvous Point. The value of -1 is used to indicate that the local interface is not a Candidate RP interface. |
| INT agentMulticastIPv6PIMSMSSMStatus | 1.3.6.1.4.1.7244.2.4.9.6.1.3 | INTEGER | read-create | The preference value for the local interface as a Candidate Rendezvous Point. The value of -1 is used to indicate that the local interface is not a Candidate RP interface. |
| agentMulticastIPv6PIMSMSSMTable | 1.3.6.1.4.1.7244.2.4.9.6 | not-accessible | Provides Per-Interface configuration of PIM-SM. | |
| agentMulticastIPv6PIMSMStaticRPEntry | 1.3.6.1.4.1.7244.2.4.9.4.1 | not-accessible | Information about a table entry. | |
| ADR agentMulticastIPv6PIMSMStaticRPGroupIpAddr | 1.3.6.1.4.1.7244.2.4.9.4.1.2 | Ipv6Address | not-accessible | Group IPv6 Address supported by the RP. |
| I32 agentMulticastIPv6PIMSMStaticRPGroupIpPrefix | 1.3.6.1.4.1.7244.2.4.9.4.1.3 | Integer32 | not-accessible | Group mask for the group IP Address. |
| ADR agentMulticastIPv6PIMSMStaticRPIpAddr | 1.3.6.1.4.1.7244.2.4.9.4.1.1 | Ipv6Address | not-accessible | IPv6 Address of the RP. |
| ROW agentMulticastIPv6PIMSMStaticRPStatus | 1.3.6.1.4.1.7244.2.4.9.4.1.4 | RowStatus | read-create | Status of this entry in the Static RP Table. Allowed values are: active(1) - This entry is active destroy(6) - Setting an entry to this value removes the entry from the table. |
| agentMulticastIPv6PIMSMStaticRPTable | 1.3.6.1.4.1.7244.2.4.9.4 | not-accessible | Provides Per-Interface configuration of PIM-SM. | |
| INT agentMulticastMLDAdminMode | 1.3.6.1.4.1.7244.2.4.8.1 | INTEGER | read-write | This enables or disables MLD on the system. |
| agentMulticastMLDConfigGroup | 1.3.6.1.4.1.7244.2.4.8 | |||
| INT agentMulticastMLDInterfaceAdminMode | 1.3.6.1.4.1.7244.2.4.8.2.1.2 | INTEGER | read-write | This enables or disables MLD on this interface. |
| agentMulticastMLDInterfaceEntry | 1.3.6.1.4.1.7244.2.4.8.2.1 | not-accessible | Information about a table entry. | |
| I32 agentMulticastMLDInterfaceIfIndex | 1.3.6.1.4.1.7244.2.4.8.2.1.1 | Integer32 | read-only | Identifies the external interface number. |
| agentMulticastMLDInterfaceTable | 1.3.6.1.4.1.7244.2.4.8.2 | not-accessible | Provides Per-Interface configuration of MLD. | |
| INT agentMulticastMLDProxyInterfaceAdminMode | 1.3.6.1.4.1.7244.2.4.8.3.1.2 | INTEGER | read-write | This enables or disables MLD proxy on this interface. |
| agentMulticastMLDProxyInterfaceEntry | 1.3.6.1.4.1.7244.2.4.8.3.1 | not-accessible | Information about a table entry. | |
| I32 agentMulticastMLDProxyInterfaceIfIndex | 1.3.6.1.4.1.7244.2.4.8.3.1.1 | Integer32 | read-only | Identifies the external interface number. |
| I32 agentMulticastMLDProxyInterfaceInterval | 1.3.6.1.4.1.7244.2.4.8.3.1.3 | Integer32 | read-write | MLD proxy interval on this interface. |
| agentMulticastMLDProxyInterfaceTable | 1.3.6.1.4.1.7244.2.4.8.3 | not-accessible | Provides Per-Interface configuration of MLD. | |
| agentMulticastPIMConfigGroup | 1.3.6.1.4.1.7244.2.4.2 | |||
| INT agentMulticastPIMConfigMode | 1.3.6.1.4.1.7244.2.4.2.1 | INTEGER | read-only | This shows which PIM mode configuration the PIM-MIB displays. |
| INT agentMulticastPIMDMAdminMode | 1.3.6.1.4.1.7244.2.4.4.1 | INTEGER | read-write | This enables or disables PIM Dense Mode on the system. |
| agentMulticastPIMDMConfigGroup | 1.3.6.1.4.1.7244.2.4.4 | |||
| agentMulticastPIMDMInterfaceEntry | 1.3.6.1.4.1.7244.2.4.4.2.1 | not-accessible | Allows configuration of parameters not provided in the standard PIM-MIB. | |
| I32 agentMulticastPIMDMInterfaceHelloInterval | 1.3.6.1.4.1.7244.2.4.4.2.1.3 | Integer32 | read-write | The hello interval of PIM Dense. |
| U32 agentMulticastPIMDMInterfaceIndex | 1.3.6.1.4.1.7244.2.4.4.2.1.1 | Unsigned32 | not-accessible | Routing Interface associated with this PIM DM configuration entry. |
| INT agentMulticastPIMDMInterfaceMode | 1.3.6.1.4.1.7244.2.4.4.2.1.2 | INTEGER | read-write | This enables or disables PIM Dense Interface Mode on the system. |
| agentMulticastPIMDMInterfaceTable | 1.3.6.1.4.1.7244.2.4.4.2 | not-accessible | Provides Per-Interface configuration of PIM-DM. | |
| INT agentMulticastPIMSMAdminMode | 1.3.6.1.4.1.7244.2.4.3.1 | INTEGER | read-write | This enables or disables PIM Sparse Mode on the system. |
| IP agentMulticastPIMSMCandRPAddress | 1.3.6.1.4.1.7244.2.4.3.8.1.1 | IpAddress | read-create | The BSR hash mask length to be advertised in bootstrap messages if this interface is elected as the bootstrap router. This hash mask length will be used in the hash algorith for selecting the RP for a particular group. |
| agentMulticastPIMSMCandRPEntry | 1.3.6.1.4.1.7244.2.4.3.8.1 | not-accessible | Allows configuration of parameters not provided in the standard PIM-MIB. | |
| IP agentMulticastPIMSMCandRPGroupAddress | 1.3.6.1.4.1.7244.2.4.3.8.1.2 | IpAddress | read-create | The preference value for the local interface as a Candidate Rendezvous Point. The value of -1 is used to indicate that the local interface is not a Candidate RP interface. |
| U32 agentMulticastPIMSMCandRPGroupPrefixLength | 1.3.6.1.4.1.7244.2.4.3.8.1.3 | Unsigned32 | read-create | The preference value for the local interface as a Candidate Rendezvous Point. The value of -1 is used to indicate that the local interface is not a Candidate RP interface. |
| INT agentMulticastPIMSMCandRPStatus | 1.3.6.1.4.1.7244.2.4.3.8.1.4 | INTEGER | read-create | The preference value for the local interface as a Candidate Rendezvous Point. The value of -1 is used to indicate that the local interface is not a Candidate RP interface. |
| agentMulticastPIMSMCandRPTable | 1.3.6.1.4.1.7244.2.4.3.8 | not-accessible | Provides Per-Interface configuration of PIM-SM. | |
| agentMulticastPIMSMCBSRInterfaceEntry | 1.3.6.1.4.1.7244.2.4.3.5.1 | not-accessible | Allows configuration of parameters not provided in the standard PIM-MIB. | |
| U32 agentMulticastPIMSMCBSRInterfaceHashMaskLength | 1.3.6.1.4.1.7244.2.4.3.5.1.2 | Unsigned32 | read-write | The BSR hash mask length to be advertised in bootstrap messages if this interface is elected as the bootstrap router. This hash mask length will be used in the hash algorith for selecting the RP for a particular group. |
| U32 agentMulticastPIMSMCBSRInterfaceIndex | 1.3.6.1.4.1.7244.2.4.3.5.1.1 | Unsigned32 | not-accessible | Routing Interface associated with this PIM SM configuration entry. |
| I32 agentMulticastPIMSMCBSRInterfacePriority | 1.3.6.1.4.1.7244.2.4.3.5.1.3 | Integer32 | read-write | The preference value for the local interface as a Candidate Rendezvous Point. The value of -1 is used to indicate that the local interface is not a Candidate RP interface. |
| agentMulticastPIMSMCBSRInterfaceTable | 1.3.6.1.4.1.7244.2.4.3.5 | not-accessible | Provides Per-Interface configuration of PIM-SM. | |
| agentMulticastPIMSMConfigGroup | 1.3.6.1.4.1.7244.2.4.3 | |||
| I32 agentMulticastPIMSMDataThresholdRate | 1.3.6.1.4.1.7244.2.4.3.2 | Integer32 | read-write | Specifies the minimum rate in Kbits/sec for the last hop router to initiate switching to the shortest path. Only support 0 and 1 (infinity). |
| INT agentMulticastPIMSMInterfaceAdminMode | 1.3.6.1.4.1.7244.2.4.3.7.1.2 | INTEGER | read-write | This enables or disables PIM Dense Mode on the system. |
| INT agentMulticastPIMSMInterfaceBsrBorder | 1.3.6.1.4.1.7244.2.4.3.7.1.5 | INTEGER | read-write | This enables or disables PIM Dense Mode on the system. |
| U32 agentMulticastPIMSMInterfaceCBSRHashMaskLength | 1.3.6.1.4.1.7244.2.4.3.7.1.7 | Unsigned32 | read-write | The BSR hash mask length to be advertised in bootstrap messages if this interface is elected as the bootstrap router. This hash mask length will be used in the hash algorith for selecting the RP for a particular group. |
| I32 agentMulticastPIMSMInterfaceCRPPreference | 1.3.6.1.4.1.7244.2.4.3.7.1.8 | Integer32 | read-write | The preference value for the local interface as a Candidate Rendezvous Point. The value of -1 is used to indicate that the local interface is not a Candidate RP interface. |
| U32 agentMulticastPIMSMInterfaceDrPriority | 1.3.6.1.4.1.7244.2.4.3.7.1.6 | Unsigned32 | read-write | The preference value for the local interface as a Candidate Rendezvous Point. The value of -1 is used to indicate that the local interface is not a Candidate RP interface. |
| agentMulticastPIMSMInterfaceEntry | 1.3.6.1.4.1.7244.2.4.3.7.1 | not-accessible | Allows configuration of parameters not provided in the standard PIM-MIB. | |
| U32 agentMulticastPIMSMInterfaceHelloInterval | 1.3.6.1.4.1.7244.2.4.3.7.1.3 | Unsigned32 | read-write | The BSR hash mask length to be advertised in bootstrap messages if this interface is elected as the bootstrap router. This hash mask length will be used in the hash algorith for selecting the RP for a particular group. |
| U32 agentMulticastPIMSMInterfaceIndex | 1.3.6.1.4.1.7244.2.4.3.7.1.1 | Unsigned32 | not-accessible | Routing Interface associated with this PIM SM configuration entry. |
| U32 agentMulticastPIMSMInterfaceJoinPruneInterval | 1.3.6.1.4.1.7244.2.4.3.7.1.4 | Unsigned32 | read-write | The preference value for the local interface as a Candidate Rendezvous Point. The value of -1 is used to indicate that the local interface is not a Candidate RP interface. |
| agentMulticastPIMSMInterfaceTable | 1.3.6.1.4.1.7244.2.4.3.7 | not-accessible | Provides Per-Interface configuration of PIM-SM. | |
| agentMulticastPIMSMSSMEntry | 1.3.6.1.4.1.7244.2.4.3.6.1 | not-accessible | Allows configuration of parameters not provided in the standard PIM-MIB. | |
| IP agentMulticastPIMSMSSMGroupAddress | 1.3.6.1.4.1.7244.2.4.3.6.1.1 | IpAddress | read-create | The BSR hash mask length to be advertised in bootstrap messages if this interface is elected as the bootstrap router. This hash mask length will be used in the hash algorith for selecting the RP for a particular group. |
| U32 agentMulticastPIMSMSSMGroupMask | 1.3.6.1.4.1.7244.2.4.3.6.1.2 | Unsigned32 | read-create | The preference value for the local interface as a Candidate Rendezvous Point. The value of -1 is used to indicate that the local interface is not a Candidate RP interface. |
| INT agentMulticastPIMSMSSMStatus | 1.3.6.1.4.1.7244.2.4.3.6.1.3 | INTEGER | read-create | The preference value for the local interface as a Candidate Rendezvous Point. The value of -1 is used to indicate that the local interface is not a Candidate RP interface. |
| agentMulticastPIMSMSSMTable | 1.3.6.1.4.1.7244.2.4.3.6 | not-accessible | Provides Per-Interface configuration of PIM-SM. | |
| agentMulticastPIMSMStaticRPEntry | 1.3.6.1.4.1.7244.2.4.3.4.1 | not-accessible | Information about a table entry. | |
| IP agentMulticastPIMSMStaticRPGroupIpAddr | 1.3.6.1.4.1.7244.2.4.3.4.1.2 | IpAddress | not-accessible | Group IP Address supported by the RP. |
| IP agentMulticastPIMSMStaticRPGroupIpMask | 1.3.6.1.4.1.7244.2.4.3.4.1.3 | IpAddress | not-accessible | Group mask for the group IP Address. |
| IP agentMulticastPIMSMStaticRPIpAddr | 1.3.6.1.4.1.7244.2.4.3.4.1.1 | IpAddress | not-accessible | IP Address of the RP. |
| ROW agentMulticastPIMSMStaticRPStatus | 1.3.6.1.4.1.7244.2.4.3.4.1.4 | RowStatus | read-create | Status of this entry in the Static RP Table. Allowed values are: active(1) - This entry is active destroy(6) - Setting an entry to this value removes the entry from the table. |
| agentMulticastPIMSMStaticRPTable | 1.3.6.1.4.1.7244.2.4.3.4 | not-accessible | Provides Per-Interface configuration of PIM-SM. | |
| INT agentMulticastRoutingAdminMode | 1.3.6.1.4.1.7244.2.4.5.1 | INTEGER | read-write | This enables or disables Multicast Routing Mode on the system. |
| agentMulticastRoutingConfigGroup | 1.3.6.1.4.1.7244.2.4.5 | |||
| agentMulticastStaticRouteConfigGroup | 1.3.6.1.4.1.7244.2.4.12 | |||
| agentMulticastStaticRouteEntry | 1.3.6.1.4.1.7244.2.4.12.1.1 | not-accessible | Allows configuration of parameters not provided in the standard PIM-MIB. | |
| U32 agentMulticastStaticRouteInterface | 1.3.6.1.4.1.7244.2.4.12.1.1.5 | Unsigned32 | read-create | The preference value for the local interface as a Candidate Rendezvous Point. The value of -1 is used to indicate that the local interface is not a Candidate RP interface. |
| U32 agentMulticastStaticRouteMetric | 1.3.6.1.4.1.7244.2.4.12.1.1.4 | Unsigned32 | read-create | The preference value for the local interface as a Candidate Rendezvous Point. The value of -1 is used to indicate that the local interface is not a Candidate RP interface. |
| IP agentMulticastStaticRouteRPFNeighbor | 1.3.6.1.4.1.7244.2.4.12.1.1.3 | IpAddress | read-create | The preference value for the local interface as a Candidate Rendezvous Point. The value of -1 is used to indicate that the local interface is not a Candidate RP interface. |
| IP agentMulticastStaticRouteSourceIP | 1.3.6.1.4.1.7244.2.4.12.1.1.1 | IpAddress | read-create | The BSR hash mask length to be advertised in bootstrap messages if this interface is elected as the bootstrap router. This hash mask length will be used in the hash algorith for selecting the RP for a particular group. |
| IP agentMulticastStaticRouteSourceMask | 1.3.6.1.4.1.7244.2.4.12.1.1.2 | IpAddress | read-create | The preference value for the local interface as a Candidate Rendezvous Point. The value of -1 is used to indicate that the local interface is not a Candidate RP interface. |
| INT agentMulticastStaticRouteStatus | 1.3.6.1.4.1.7244.2.4.12.1.1.6 | INTEGER | read-create | The preference value for the local interface as a Candidate Rendezvous Point. The value of -1 is used to indicate that the local interface is not a Candidate RP interface. |
| agentMulticastStaticRouteTable | 1.3.6.1.4.1.7244.2.4.12.1 | not-accessible | Provides Per-Interface configuration of PIM-DM. | |
| multicast | 1.3.6.1.4.1.7244.2.4 | The MIB definitions for Multicast Routing Flex package. |
RFC description
Provides multicast routing configuration and statistics including IGMP management for Quanta switches.
Start monitoring Quanta Computer network switch (multicast routing) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.