All MIBs › DASAN-GEPON-MIB
Organization: DASAN Co., Ltd.
Last Updated: 2005-04-13
Category: GPON/EPON
Description: Manages Gigabit EPON (GEPON) optical network unit registration and service configuration on DASAN OLTs.
Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.
What Is DASAN-GEPON-MIB?
DASAN-GEPON-MIB is a DASAN Networks enterprise MIB for managing Gigabit Ethernet PON (GEPON) access equipment, specifically Optical Line Terminal (OLT) devices and their associated Optical Network Units (ONUs). It exposes objects rooted under the dasanPonMIBObjects/dsPon branch related to ONU registration, discovery, and per-subscriber service configuration on the PON access network. It is used to monitor the operational status of ONUs on a GEPON line -- registration/online state of subscriber units and service provisioning -- functioning as fault and configuration monitoring for access-network hardware rather than raw traffic counters. As a fiber access technology MIB it likely complements standard PON/Ethernet interface MIBs (e.g., IF-MIB) for lower-layer statistics, though this is not explicit from the available data. It is typically deployed on DASAN GEPON OLT chassis in FTTH/FTTB access networks where operators track ONU registration and service state per subscriber port. Network engineers evaluating or troubleshooting this functionality can download the DASAN-GEPON-MIB file directly to load it into their MIB browser.
IPNetwork Monitor allows you to monitor SNMP objects defined in DASAN-GEPON-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.
Supported Devices
- DASAN GEPON OLT
- GEPON ONU
Monitoring Examples
The sample only exposes the top-level dasanPonMIBObjects and dsPon registration branches without deeper table or object names, so a specific polling scenario can't be grounded in concrete identifiers here; in a real deployment an operator would typically drill into ONU registration and status tables beneath dasanPonMIBObjects to confirm which ONUs are online and registered.
What Can Be Monitored
- ONU registration status
- ONU online/offline state
- per-subscriber service configuration
Imported Objects
From DASAN-SMI
| dasanMgmt | OBJECT-IDENTITY |
From DASAN-SWITCH-MIB
| dsSwitchModules | OBJECT-IDENTITY |
From RFC1155-SMI
| Counter |
From SNMPv2-CONF
| MODULE-COMPLIANCE | |
| OBJECT-GROUP |
From SNMPv2-SMI
| Counter32 | |
| Counter64 | |
| Gauge32 | |
| Integer32 | |
| IpAddress | |
| MODULE-IDENTITY | |
| NOTIFICATION-TYPE | |
| OBJECT-TYPE | |
| TimeTicks | |
| mib-2 |
From SNMPv2-TC
| AutonomousType | |
| DisplayString | |
| PhysAddress | |
| RowStatus | |
| TEXTUAL-CONVENTION | |
| TestAndIncr | |
| TimeStamp | |
| TruthValue |
OIDs
RFC description
Gigabit Ethernet Passive Optical Network (GEPON) ONU and OLT device management for DASAN systems.
Start monitoring DASAN GEPON OLT/ONU with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.