DASAN-ADSL-MIB :: dsAdslLineConfProfileExtnPML2EntryThresholdRate

MIB Reference — IPNetwork Monitor · Updated September 26, 2026

All MIBs › DASAN-ADSL-MIB › dsAdslLineConfProfileExtnPML2EntryThresholdRate

dsAdslLineConfProfileExtnPML2EntryThresholdRate

Module: DASAN-ADSL-MIB

OID (symbolic): DASAN-ADSL-MIB::dsAdslLineConfProfileExtnPML2EntryThresholdRate

OID (numeric): 1.3.6.1.4.1.6296.9.5.1.1.16.1.64

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-write

Description: PM configuration parameter, related to the L2 low power state. This parameter specifies the downstream data rate threshold that triggers autonomous entry into low power state (L2). The data rate is coded in bit/s, and must be less than or equal to the value of GSMIB_adslAtucConfGsPML2Exit ThresholdRate.

What is dsAdslLineConfProfileExtnPML2EntryThresholdRate?

The downstream data-rate threshold, in bit/s (256000-1024000), below which the line will autonomously enter the L2 low-power state; it must be less than or equal to the corresponding exit threshold rate. Admins tune this to control how eagerly a lightly-loaded line drops into power-saving mode.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.6296.9.5.1.1.16.1.64
snmpwalk -v2c -c public <target> DASAN-ADSL-MIB::dsAdslLineConfProfileExtnPML2EntryThresholdRate

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.6296.9.5.1.1.16.1.64.1
snmpget -v2c -c public <target> DASAN-ADSL-MIB::dsAdslLineConfProfileExtnPML2EntryThresholdRate.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.6296.9.5.1.1.16.1.64.1 i <value>

SNMPv3 example:

snmpget -v3 -l authPriv -u snmpv3-user -a SHA -A "AuthPassword1" -x AES -X "PrivPassword1" <target> dsAdslLineConfProfileExtnPML2EntryThresholdRate.1

Start monitoring DASAN Networks ADSL DSLAM line card with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the DASAN-ADSL-MIB::dsAdslLineConfProfileExtnPML2EntryThresholdRate OID value, configure state conditions and alerts, and monitor any DASAN Networks ADSL DSLAM line card from a single console.

OID Breakdown

Upper-level ancestors (8 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.6296dasanDASAN-DHCP-MIB
1.3.6.1.4.1.6296.9dasanMgmtDASAN-SMI
Numeric OIDNameModule
1.3.6.1.4.1.6296.9.5dasanAdslMIBDASAN-ADSL-MIB
1.3.6.1.4.1.6296.9.5.1dasanAdslLineMIBDASAN-ADSL-MIB
1.3.6.1.4.1.6296.9.5.1.1dasanAdslMIBObjectsDASAN-ADSL-MIB
1.3.6.1.4.1.6296.9.5.1.1.16dsAdslLineConfProfileExtnTableDASAN-ADSL-MIB
1.3.6.1.4.1.6296.9.5.1.1.16.1dsAdslLineConfProfileExtnEntryDASAN-ADSL-MIB
1.3.6.1.4.1.6296.9.5.1.1.16.1.64dsAdslLineConfProfileExtnPML2EntryThresholdRateDASAN-ADSL-MIB