All MIBs › CYCLADES-ACS5K-CONF-MIB › cyEnableIPv4
cyEnableIPv4
Module: CYCLADES-ACS5K-CONF-MIB
OID (symbolic): CYCLADES-ACS5K-CONF-MIB::cyEnableIPv4
OID (numeric): 1.3.6.1.4.1.2925.8.2.4.7
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: This parameter is used to enable or disable the configuration of IPv4 addresses
What is cyEnableIPv4?
Enables or disables IPv4 addressing on the ACS 5000's Ethernet interface: no(0) disables it, yes(1) enables it, letting an admin run the device on IPv6-only if desired.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.2925.8.2.4.7 snmpwalk -v2c -c public <target> CYCLADES-ACS5K-CONF-MIB::cyEnableIPv4
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.2925.8.2.4.7.1 snmpget -v2c -c public <target> CYCLADES-ACS5K-CONF-MIB::cyEnableIPv4.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.2925.8.2.4.7.1 i <value>
Start monitoring Avocent Cyclades ACS 5000 console/terminal server (network config) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CYCLADES-ACS5K-CONF-MIB::cyEnableIPv4 OID value, configure state conditions and alerts, and monitor any Avocent Cyclades ACS 5000 console/terminal server (network config) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.2925 | cyclades | CYCLADES-MIB |
| 1.3.6.1.4.1.2925.8 | cyACS5KMgmt | CYCLADES-ACS5K-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.2925.8.2 | cyACS5KConf | CYCLADES-ACS5K-CONF-MIB |
| 1.3.6.1.4.1.2925.8.2.4 | cyEthItf | CYCLADES-ACS5K-CONF-MIB |
| 1.3.6.1.4.1.2925.8.2.4.7 | cyEnableIPv4 | CYCLADES-ACS5K-CONF-MIB |