| OID symbolic | OID numeric | Type | Access | Description |
|---|
| stTable | 1.3.6.1.4.1.495.2.1.6.60.10 | | not-accessible | A table containing configuration parameters, controls, status and statistics
for the S/T Interface Transceiver Driver. |
| stEntry | 1.3.6.1.4.1.495.2.1.6.60.10.1 | | not-accessible | The entry index in the ISDN S/T Interface Transceiver Driver table. |
| INT stSlotNumberIndex | 1.3.6.1.4.1.495.2.1.6.60.10.1.1 | INTEGER | read-only | Indicates the physical slot number of the I/O card in the CX900/CX900 PRO.
Range of Values: 1-6 for CX900, 1-8 for CX900 PRO
Default Value: none |
| INT stRowStatus | 1.3.6.1.4.1.495.2.1.6.60.10.1.2 | INTEGER | read-write | Determines whether this entry is to be removed from service
(i.e. invalidated) within the ST Driver.
Options:
invalid (1): row is flagged; after next reset values will be disabled and row
will be deleted from table
valid (2): values are enabled
Default Value: valid
Configuration Changed: administrative |
| INT stPS1Detection | 1.3.6.1.4.1.495.2.1.6.60.10.1.10 | INTEGER | read-write | Indicates whether or not the driver has to wait for the detection
of the Power Source 1 before generating an activation request at
system power-up.
Options:
disabled (1): Power source 1 detection is not performed.
enabled (2): Power source 1 detection is performed.
Default Value: disabled (1) |
| INT stTimer1 | 1.3.6.1.4.1.495.2.1.6.60.10.1.11 | INTEGER | read-write | Indicates the maximum duration (in seconds) allocated for ISDN
link synchronization at the NT interface as specified in the
I.430 standard.
Default Value: 15 |
| INT stTimer3 | 1.3.6.1.4.1.495.2.1.6.60.10.1.12 | INTEGER | read-write | Indicates the maximum duration (in seconds) allocated for ISDN
link synchronization at the TE interface as specified in the
I.430 standard.
Default Value: 10 |
| INT stTest | 1.3.6.1.4.1.495.2.1.6.60.10.1.13 | INTEGER | read-write | Indicates if the driver needs to configure the S/T Interface in a test mode.
Options:
disabled (1): Test mode is disabled
internal2B1D (2): The B1, B2 and D channel data received from the CPU are sent back unchanged.
internal2B (3): The B1 and B2 channel data received from the CPU are sent back unchanged.
external (4): An 'analog' loopback is performed if the transmit pair is shorted to the received pair.
stLpbk (5): The B1 and B2 channel data received from the line interface are sent back unchanged.
testSignal (6): The device transmits a 96 kHz square wave test signal on the line interface.
Default Value: disabled (1) |
| INT stPortStatus | 1.3.6.1.4.1.495.2.1.6.60.10.1.20 | INTEGER | read-only | Indicates the status of the port on this I/O card.
Options:
portDown (1): port is down
portUp (2): port is up
Default Value: none |
| INT stRxInfoState | 1.3.6.1.4.1.495.2.1.6.60.10.1.21 | INTEGER | read-only | Indicates the signal that is received across the S/T reference point
according to I.430 standard, table 4.
Options:
info0: INFO0 signal received from the TE or the NT
info1: INFO1 signal received from the TE
info2: INFO2 signal received from the NT
info3: INFO3 signal received from the TE
info4: INFO4 signal received from the NT
infoX: INFOX signal received from the TE or the NT
Default Value: none |
| INT stTxInfoState | 1.3.6.1.4.1.495.2.1.6.60.10.1.22 | INTEGER | read-only | Indicates the signal that is transmitted across the S/T reference point
according to I.430 standard, table 4.
Options:
info0: INFO0 signal transmitted to the TE or the NT
info1: INFO1 signal transmitted to the NT
info2: INFO2 signal transmitted to the TE
info3: INFO3 signal transmitted to the NT
info4: INFO4 signal transmitted to the TE
infoX: INFOX signal transmitted to the TE or the NT
Default Value: none |
| INT stErrorIndicator | 1.3.6.1.4.1.495.2.1.6.60.10.1.23 | INTEGER | read-only | Indicates if an error condition has been detected by the
activation state machine. Error conditions:
- lost of framing element;
- invalid info received.
Options:
errorDetected (1): an error condition has occurred.
noError (2): no error condition has occurred.
Default Value: none |
| INT stFrameSync | 1.3.6.1.4.1.495.2.1.6.60.10.1.24 | INTEGER | read-only | Indicates if the frame synchronization is achieved
Options:
noSync (1): frame synchronization is not achieved
Sync (2): frame synchronization is achieved
Default Value: none |
| INT stPortMode | 1.3.6.1.4.1.495.2.1.6.60.10.1.25 | INTEGER | read-only | Indicates in which mode the ST port is functioning.
Options:
te (1): Terminal Endpoint, port is in user mode
nt (2): Network Termination, port is in network mode.
Default Value: none |
| CTR stActivation | 1.3.6.1.4.1.495.2.1.6.60.10.1.40 | Counter | read-only | Indicates the number of activation requests received by this I/O card.
Range of Values: 0-4294967295
Default Value: none |
| CTR stDeactivation | 1.3.6.1.4.1.495.2.1.6.60.10.1.41 | Counter | read-only | Indicates the number of deactivation requests received by this I/O card.
Range of Values: 0-4294967295
Default Value: none |
| CTR stTransition | 1.3.6.1.4.1.495.2.1.6.60.10.1.42 | Counter | read-only | Indicates the number of down-to-up or up-to-down transitions that have
occurred on this I/O card.
Range of Values: 0-4294967295
Default Value: none |
| CTR stNbErrors | 1.3.6.1.4.1.495.2.1.6.60.10.1.43 | Counter | read-only | Indicates the number of times the transceiver has indicated that
an error condition has been detected by the activation state
machine as outlined in CCITT I.430, ETSI ETS 300012 and
ANSI T1.605 standards.
Range of Values: 0-4294967295
Default Value: none |
| CTR stFrameSyncLost | 1.3.6.1.4.1.495.2.1.6.60.10.1.44 | Counter | read-only | Indicates the number of times the transceiver has lost it's
frame synchronization.
Range of Values: 0-4294967295
Default Value: none |
| INT stMissingAMIViolation | 1.3.6.1.4.1.495.2.1.6.60.10.1.45 | INTEGER | read-only | Indicates the number of frames not containing the right number of
AMI violations.
Range of Values: 0-255
Default Value: none |
| INT stUnbalancedFrame | 1.3.6.1.4.1.495.2.1.6.60.10.1.46 | INTEGER | read-only | Indicates the number of unbalanced frames.
Range of Values: 0-255
Default Value: none |
| INT stClearStat | 1.3.6.1.4.1.495.2.1.6.60.10.1.60 | INTEGER | write-only | Clears all S/T driver statistic counters for this I/O card.
Options:
clearStats : clears statistics
Default value: none |
| INT stPortCtrl | 1.3.6.1.4.1.495.2.1.6.60.10.1.61 | INTEGER | write-only | Either brings up/down the port on this I/O card or reset it.
Options:
portDown (1): bring port down
portUp (2): bring port up
portReset (3): port is reset and configuration is saved
openBChannels (4): both B channels are opened (for test purpose only).
Default Value: none |
