stTest
Module: CXST-MIB
OID (symbolic): CXST-MIB::stTest
OID (numeric): 1.3.6.1.4.1.495.2.1.6.60.10.1.13
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: Indicates if the driver needs to configure the S/T Interface in a test mode.
Options: disabled (1): Test mode is disabled internal2B1D (2): The B1, B2 and D channel data received from the CPU are sent back unchanged. internal2B (3): The B1 and B2 channel data received from the CPU are sent back unchanged. external (4): An 'analog' loopback is performed if the transmit pair is shorted to the received pair. stLpbk (5): The B1 and B2 channel data received from the line interface are sent back unchanged. testSignal (6): The device transmits a 96 kHz square wave test signal on the line interface.
Default Value: disabled (1)
What is stTest?
Puts the S/T interface into a specific test mode, such as internal2B1D/internal2B loopbacks of the B/D channel data from the CPU, an external analog loopback, stLpbk looping data from the line, or transmitting a 96 kHz test signal; disabled by default, used by an admin to isolate a suspected hardware fault on the S/T port without needing a far-end device.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.495.2.1.6.60.10.1.13 snmpwalk -v2c -c public <target> CXST-MIB::stTest
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.495.2.1.6.60.10.1.13.1 snmpget -v2c -c public <target> CXST-MIB::stTest.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.495.2.1.6.60.10.1.13.1 i <value>
Start monitoring Aastra telephony/networking equipment (structured trunk) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CXST-MIB::stTest OID value, configure state conditions and alerts, and monitor any Aastra telephony/networking equipment (structured trunk) from a single console.
OID Breakdown
Upper-level ancestors (11 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.495 | memotec | MEMOTEC-SMI |
| 1.3.6.1.4.1.495.2 | memotecProducts | MEMOTEC-SMI |
| 1.3.6.1.4.1.495.2.1 | cxProduct | MEMOTEC-SMI |
| 1.3.6.1.4.1.495.2.1.6 | cxApplication | CXProduct-SMI |
| 1.3.6.1.4.1.495.2.1.6.60 | cxST | CXProduct-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.495.2.1.6.60.10 | stTable | CXST-MIB |
| 1.3.6.1.4.1.495.2.1.6.60.10.1 | stEntry | CXST-MIB |
| 1.3.6.1.4.1.495.2.1.6.60.10.1.13 | stTest | CXST-MIB |