CXModuleHardware-MIB

All MIBs › CXModuleHardware-MIB

Category: Domain: System Management, Vendor: Memotec

Description: Monitors plug-in module hardware status, type, and revision on CX Memotec chassis devices.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is CXModuleHardware-MIB?

CXModuleHardware-MIB is a legacy Crosscomm (CX900/CX1000 architecture, built on CXProduct-SMI) proprietary MIB reporting CPU-card hardware identity. Its objects cover a configurable alias (used as the CLI console prompt), hardware revision/assembly/ECO, physical slot, CPU clock speed, LED-display state, Flash/EPROM size, private/shared DRAM size, up-time ticks, reset timeout, software version, and node ID. As a hardware-status MIB it lets an administrator confirm CPU-card revision and memory configuration on a legacy Crosscomm CX router. It is deployed on legacy Crosscomm CX900/CX1000 router equipment. Engineers can download the CXModuleHardware-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in CXModuleHardware-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Legacy Crosscomm CX900/CX1000 router equipment

Monitoring Examples

An administrator checks cxModuleHwSwVersion and cxModuleHwCpuClockSpeed to confirm CPU-card firmware and clock speed on a legacy Crosscomm CX router.

What Can Be Monitored

CPU-card hardware revision and memory configuration

Imported Objects

From CXProduct-SMI

Alias
cxModuleHardware	OBJECT-IDENTITY

From RFC-1212

OBJECT-TYPE

From RFC1155-SMI

TimeTicks

From RFC1213-MIB

DisplayString

OIDs

OID symbolic	OID numeric	Type	Access	Description
ALI cxModuleHwAlias	1.3.6.1.4.1.495.2.1.5.1.1	Alias	read-write	Determines the name the network administrator assigns to the CPU card. When you configure via the local console, this name is the command prompt. The setting of this object is dynamic. The system immediately implements the name you choose. Range of Values: From 1 to 32 alphanumeric characters. You can use any combination of lettersor numbers; however, you cannot use blank spaces. Use a dash or underscore as a delimiter. Default value: - CX900 architecture: CX900 - CX1000 architecture: CX1000 Configuration Changed: Operative
INT cxModuleHwRevAssemblyAndEco	1.3.6.1.4.1.495.2.1.5.1.2	INTEGER	read-only	Displays the hardware revision of the device. You cannot modify this object. It is a display that the software provides. Range of Values: 7 numeric bits Default Value: None
INT cxModuleHwPhysSlot	1.3.6.1.4.1.495.2.1.5.1.3	INTEGER	read-only	Displays the number of the physical slot where the CPU card resides. You cannot modify this object. It is a display that the software provides. Note: THE CX 900 DOES NOT SUPPORT THIS OBJECT. Range of values: - CX900 architechture: Not supported - CX1000 architechture: From 1 to 16 Default value: None
INT cxModuleHwCpuClockSpeed	1.3.6.1.4.1.495.2.1.5.1.4	INTEGER	read-only	Displays the CPU clock rate in Khz. You cannot modify this object. It is a display that the software provides. Range of Values: None. The value is hardcoded on the CPU. Default Value: 25000
INT cxModuleHwLedsDisplay	1.3.6.1.4.1.495.2.1.5.1.5	INTEGER	read-only	Displays the status of the error LED. You cannot modify this object. It is a display that the software provides. Options: on: Error LED is on. off: Error LED is off. Default Value: None
INT cxModuleHwFlashEpromSize	1.3.6.1.4.1.495.2.1.5.1.7	INTEGER	read-only	Dispays the size, in Kbytes, of the Flash EPROM. You cannot modify this object. It is a display that the software provides. Range of Values: A maximum of 4 digits from 1024 to 6144 Default Value: None
INT cxModuleHwPrivateDramSize	1.3.6.1.4.1.495.2.1.5.1.8	INTEGER	read-only	Displays the size, in Kbytes, of the System DRAM. You cannot modify this object. It is a display that the software provides. Range of Values: A maximum of 5 digits from 512 to 33792 Default Value: None
INT cxModuleHwSharedDramSize	1.3.6.1.4.1.495.2.1.5.1.9	INTEGER	read-only	Displays the size, in Kbytes, of the Data Buffer DRAM. You cannot modify this object. It is a display that the software provides. Range of Values: -A maximum of 5 digits from 512 to 33792 Default Value: None
TIK cxModuleHwUpTimeTicks	1.3.6.1.4.1.495.2.1.5.1.12	TimeTicks	read-only	Displays the number of time ticks,in 10msec increments, since power up. You cannot modify this object. It is a display that the software provides. Range of Values: 0 to 4,294,967,295 Default Value: 0
INT cxModuleHwResetTimeOut	1.3.6.1.4.1.495.2.1.5.1.13	INTEGER	read-write	Determines the length of delay, in seconds before next scheduled card reset. This type of reset saves the configuration before resetting. The setting of this object is dynamic. The system immediately begins reducing the value you enter. Range of Values: A maximum of 10 digits from 0 to 4,294,967,295 Default Value: 0 Configuration Changed: Operative
STR cxModuleHwSwVersion	1.3.6.1.4.1.495.2.1.5.1.14	DisplayString	read-only	Displays the textual string which identifies the software currently running on the device. You cannot modify this object. It is a display that the software provides.
INT cxModuleHwNodeId	1.3.6.1.4.1.495.2.1.5.1.15	INTEGER	read-write	Identifies this system with an ID number. This parameter is used only for SKYDATA's connection management. Range of Values: 0 to 65,535 Default Value: None

RFC description

Manages CX900 and CX1000 module hardware configuration including CPU clock speed, RAM allocation, and physical slot information.

Start monitoring Legacy Crosscomm CX900/CX1000 router (CPU card hardware) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download CXModuleHardware-MIB

What Is CXModuleHardware-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description