| OID symbolic | OID numeric | Type | Access | Description |
|---|
| INT llcfrcnvSysRouteConnectInterval | 1.3.6.1.4.1.495.2.1.6.33.1 | INTEGER | read-write | Determines the number of seconds between route connection attempts by the
LLC-2 Frame Relay Convergence layer.
Range of Values: 10 - 900 seconds
Default Value: 30 seconds
Configuration Changed: administrative |
| INT llcfrcnvMibLevel | 1.3.6.1.4.1.495.2.1.6.33.2 | INTEGER | read-only | Used to determine current MIB module release supported
by the agent. Object is in decimal. |
| llcfrcnvSapTable | 1.3.6.1.4.1.495.2.1.6.33.10 | | not-accessible | This table contains configuration information for each LLC-2 Frame Relay
Convergence layer SAP (service access point). |
| llcfrcnvSapEntry | 1.3.6.1.4.1.495.2.1.6.33.10.1 | | not-accessible | Defines a row in the llcfrcnvSapTable. Each row contains the objects
which define a service access point. |
| INT llcfrcnvSapNumber | 1.3.6.1.4.1.495.2.1.6.33.10.1.1 | INTEGER | read-only | Identifies this SAP (service access point) with a numerical value which
must be unique for each LLC-2 Frame Relay Convergence SAP. Value 0 is
allocated to the Public SAP (PSAP) used to interface with the FRIM module
via IAM. The row associated with value 0 always exists and cannot be
deleted. All other SAPs are used to communicate with other higher layer
protocols. |
| INT llcfrcnvSapRowStatus | 1.3.6.1.4.1.495.2.1.6.33.10.1.2 | INTEGER | read-write | Determines the status of the objects in a table row.
Options:
invalid (1): Row is flagged, after next reset the values will be disabled
and the row is deleted from the table
valid (2): Values are enabled
Configuration Changed: administrative |
| ALI llcfrcnvSapAlias | 1.3.6.1.4.1.495.2.1.6.33.10.1.3 | Alias | read-write | Identifies this service access point by a textual name. Names must be
unique across all service access points at all layers.
Range of Values: 1 -16 alphanumeric characters (first character must be a
letter)
Default Value: none
Configuration Changed: administrative |
| INT llcfrcnvSapSrcLlcSap | 1.3.6.1.4.1.495.2.1.6.33.10.1.4 | INTEGER | read-write | Determines the source LLC-2 SAP address associated with this connection.
Only even values are allowed (usually assigned as a multiple of 04
hexadecimal). This SAP address should not be confused with the internal
SAP numbers used by the LLC-2 layer.
Range of Values: 2 - 254 (even values only)
Default Value: 4
Configuration Changed: administrative and operative |
| INT llcfrcnvSapDstLlcSap | 1.3.6.1.4.1.495.2.1.6.33.10.1.5 | INTEGER | read-write | Determines the destination LLC-2 SAP address associated with this
connection. Only even values are allowed (usually assigned as a multiple
of 04 hexadecimal). This SAP address should not be confused with the
internal SAP numbers used by the LLC-2 layer.
Range of Values: 2 - 254 (even values only)
Default Value: 4
Configuration Changed: administrative
and operative |
| INT llcfrcnvSapRouteIndex | 1.3.6.1.4.1.495.2.1.6.33.10.1.6 | INTEGER | read-write | Determines the route associated with this SAP (service access point). The
value of this object is the llcfrcnvSRIndex which identifies the route in
the llcfrcnvSysRouteTable. Multiple SAP entries may use the same system
route provided that they have a different
llcfrcnvSapSrcLlcSap-llcfrcnvSapDstLlcSap pair.
Range of Values: 0 - 64
Note:
A value of 0 indicates no route is selected.
Default Value: none
Related Objects:
llcfrcnvSRIndex
llcfrcnvSapSrcLlcSap
llcfrcnvSapDstLlcSap
Configuration Changed: administrative and operative |
| INT llcfrcnvSapControl | 1.3.6.1.4.1.495.2.1.6.33.10.1.7 | INTEGER | write-only | Clears all objects that contain statistics for this service access point.
Options:
clearStats (1)
Configuration Changed: administrative and operative |
| INT llcfrcnvSapState | 1.3.6.1.4.1.495.2.1.6.33.10.1.8 | INTEGER | read-only | Indicates the status of the SAP (service access point).
Options:
offLine (1): Indicates that the SAP is not configured.
unbound (2): Indicates that this SAP is not bound to its companion SAP.
bound (3): Indicates that this SAP is bound to its companion SAP.
connected (4):.Indicates that this SAP is bound and is available for data
transfer. |
| CTR llcfrcnvSapTxFrames | 1.3.6.1.4.1.495.2.1.6.33.10.1.9 | Counter | read-only | Indicates the number of frames transmitted by this service access point. |
| CTR llcfrcnvSapRxFrames | 1.3.6.1.4.1.495.2.1.6.33.10.1.10 | Counter | read-only | Indicates the number of frames received by this service access point. |
| CTR llcfrcnvSapTxOctets | 1.3.6.1.4.1.495.2.1.6.33.10.1.11 | Counter | read-only | Indicates the number of octets transmitted by this service access point. |
| CTR llcfrcnvSapRxOctets | 1.3.6.1.4.1.495.2.1.6.33.10.1.12 | Counter | read-only | Indicates the number of octets received by this service access point. |
| CTR llcfrcnvSapUnopenedServiceDiscards | 1.3.6.1.4.1.495.2.1.6.33.10.1.13 | Counter | read-only | Indicates the number of frames received and discarded by this service
access point because there was no associated connection. |
| CTR llcfrcnvSapTxResets | 1.3.6.1.4.1.495.2.1.6.33.10.1.14 | Counter | read-only | Indicates the number of connection reset requests issued from this
service access point. |
| CTR llcfrcnvSapRxResets | 1.3.6.1.4.1.495.2.1.6.33.10.1.15 | Counter | read-only | Indicates the number of connection reset requests/indications received by
this service access point. |
| MAC llcfrcnvSapHostMacAddr | 1.3.6.1.4.1.495.2.1.6.33.10.1.16 | MacAddress | read-write | This object specifies the MAC address of the host station to which
the FR LLC-2 connection will be established - Used only for SNA BAN Transport.
If this object is configured, then it is automatically assumed that BAN will be
the SNA transport used. Otherwise, the SNA transport is BNN. |
| MAC llcfrcnvSapCntrMacAddr | 1.3.6.1.4.1.495.2.1.6.33.10.1.17 | MacAddress | read-write | This object specifies the MAC address of the work station which
will be connected to the host - Used only for SNA BAN Transport.
If this object is configured, then it is automatically assumed that BAN will be
the SNA transport used. Otherwise, the SNA transport is BNN. |
| llcfrcnvSysRouteTable | 1.3.6.1.4.1.495.2.1.6.33.11 | | not-accessible | This table contains information about each LLC-2 FR Convergence system
route. |
| llcfrcnvSysRouteEntry | 1.3.6.1.4.1.495.2.1.6.33.11.1 | | not-accessible | Defines a row in the llcfrcnvSysRouteTable. Each row contains the objects
which define an LLC-2 FR Convergence system route. |
| INT llcfrcnvSRIndex | 1.3.6.1.4.1.495.2.1.6.33.11.1.1 | INTEGER | read-only | A number that uniquely identifies each LLC-2 Frame Relay Convergence
Route.
Related Objects:
llcfrcnvSapRouteIndex
Range of Values: 0 - 64 |
| INT llcfrcnvSRRowStatus | 1.3.6.1.4.1.495.2.1.6.33.11.1.2 | INTEGER | read-write | Determines the status of the objects in a table row.
Options:
invalid (1): Row is flagged, after next reset the values will be disabled
and the row is deleted from the table
valid (2): Values are enabled
Default Value: none
Configuration Changed: administrative |
| ALI llcfrcnvSRDestAlias | 1.3.6.1.4.1.495.2.1.6.33.11.1.3 | Alias | read-write | Identifies the textual name of the destination service this route
connects to. The destination alias is the name of the Frame Relay layer
outlet circuit (frpCircuitAlias).
Range of Values: 1 -16 alphanumeric characters (first character must be a
letter)
Default Value: none
Configuration Changed: administrative and operative |
| INT llcfrcnvSRControl | 1.3.6.1.4.1.495.2.1.6.33.11.1.4 | INTEGER | write-only | Permits control of a specific SAP (service access point).
Options:
clearStats (1): Clear all statistics stored by statistics objects.
Configuration Changed: administrative and operative |
| INT llcfrcnvSRPriority | 1.3.6.1.4.1.495.2.1.6.33.11.1.5 | INTEGER | read-write | Determines the filtering/forwarding action and the forwarding priority
for data sent from the STP bridge.
Options:
discard (1): Do not forward the data.
forward (2): Forward the data.
priority-low (3): Forward with a low priority (Frame Relay only).
priority-high (4): Forward with a high priority (Frame Relay only).
Default Value: forward (2)
Configuration Changed: Administrative |
| SUB llcfrcnvSRSubRef | 1.3.6.1.4.1.495.2.1.6.33.11.1.6 | SubRef | read-write | Specifies a reference number that uniquely identifies this route. This
number is used by the FRIM (Frame Relay Interface Module) to identify
routes using the same DLCI (enables PVC consolidation). This number must
be unique for all routes sharing the same DLCI.
Range of Values: 1 - 255 (when using PVC consolidation)
0 (when not using PVC consolidation)
Default Value: 0
Configuration Changed: administrative and operative |
| INT llcfrcnvSRRouteStatus | 1.3.6.1.4.1.495.2.1.6.33.11.1.10 | INTEGER | read-only | Indicates the status of this route.
Options:
offLine (1): Indicates that the route is not configured.
notConnected (2): Indicates that the remote destination may not exist, or
has refused the connection.
inProgress (3): Indicates that the connection is in the process of being
established. This is a transient state.
connected (4): Indicates that the connection is established and is ready
for data transfer. |
| INT llcfrcnvSRClearStatus | 1.3.6.1.4.1.495.2.1.6.33.11.1.11 | INTEGER | read-only | Indicates the status of a failed connection. The value of this object is
only valid only between attempts to establish the route connection
(llcfrcnvSRRouteStatus = notConnected), and may or may not change after
successive failed attempts.
Options:
noFailure (1): Once a system route has been successfully connected, this
value is maintained for the duration of the connection.
internalError (2): An internal error has occurred.
remoteAllocFailure (3): There is insufficient memory available for FRIM to
establish this connection.
remoteNoAccess (4): The requested frame relay service does not exist.
remotePvcDown (5): The requested Frame Relay outlet circuit is down.
remotePvcBusy (6): The requested Frame
Relay outlet circuit is already
connected.
localFcnFailure (7): Flow control negotiation failed.
remoteFcnFailure (8): Flow control negotiation failed at the Frame Relay
layer.
remoteAliasNotFound (9): The destination service alias
(llcfrcnvSRDestAlias) does not exist. |
| CTR llcfrcnvSROutSuccessfullConnects | 1.3.6.1.4.1.495.2.1.6.33.11.1.12 | Counter | read-only | Indicates the number of successful connections originated for this route.
An outgoing connection is always attempted from LLC-2 Frame Relay
Convergence to FRIM. |
| CTR llcfrcnvSROutUnsuccessfullConnects | 1.3.6.1.4.1.495.2.1.6.33.11.1.13 | Counter | read-only | Indicates the number of unsuccessful connections originated for this
route. An outgoing connection is always attempted from LLC-2 Frame Relay
Convergence to FRIM. |
