All MIBs › CXLlcFrConv-MIB › llcfrcnvSRClearStatus
llcfrcnvSRClearStatus
Module: CXLlcFrConv-MIB
OID (symbolic): CXLlcFrConv-MIB::llcfrcnvSRClearStatus
OID (numeric): 1.3.6.1.4.1.495.2.1.6.33.11.1.11
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-only
Description: Indicates the status of a failed connection. The value of this object is only valid only between attempts to establish the route connection (llcfrcnvSRRouteStatus = notConnected), and may or may not change after successive failed attempts.
Options: noFailure (1): Once a system route has been successfully connected, this value is maintained for the duration of the connection.
internalError (2): An internal error has occurred.
remoteAllocFailure (3): There is insufficient memory available for FRIM to establish this connection.
remoteNoAccess (4): The requested frame relay service does not exist.
remotePvcDown (5): The requested Frame Relay outlet circuit is down.
remotePvcBusy (6): The requested Frame Relay outlet circuit is already connected.
localFcnFailure (7): Flow control negotiation failed.
remoteFcnFailure (8): Flow control negotiation failed at the Frame Relay layer.
remoteAliasNotFound (9): The destination service alias (llcfrcnvSRDestAlias) does not exist.
What is llcfrcnvSRClearStatus?
Gives the specific reason a route connection last failed, such as remotePvcDown(5), remotePvcBusy(6), or remoteAliasNotFound(9), and only stays meaningful while llcfrcnvSRRouteStatus reads notConnected. Admins check this value to pinpoint why a route won't come up instead of just seeing that it's down.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.495.2.1.6.33.11.1.11 snmpwalk -v2c -c public <target> CXLlcFrConv-MIB::llcfrcnvSRClearStatus
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.495.2.1.6.33.11.1.11.1 snmpget -v2c -c public <target> CXLlcFrConv-MIB::llcfrcnvSRClearStatus.1
Start monitoring Memotec CX series (SNA/Frame Relay protocol converter) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CXLlcFrConv-MIB::llcfrcnvSRClearStatus OID value, configure state conditions and alerts, and monitor any Memotec CX series (SNA/Frame Relay protocol converter) from a single console.
OID Breakdown
Upper-level ancestors (11 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.495 | memotec | MEMOTEC-SMI |
| 1.3.6.1.4.1.495.2 | memotecProducts | MEMOTEC-SMI |
| 1.3.6.1.4.1.495.2.1 | cxProduct | MEMOTEC-SMI |
| 1.3.6.1.4.1.495.2.1.6 | cxApplication | CXProduct-SMI |
| 1.3.6.1.4.1.495.2.1.6.33 | cxLlcFrConv | CXProduct-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.495.2.1.6.33.11 | llcfrcnvSysRouteTable | CXLlcFrConv-MIB |
| 1.3.6.1.4.1.495.2.1.6.33.11.1 | llcfrcnvSysRouteEntry | CXLlcFrConv-MIB |
| 1.3.6.1.4.1.495.2.1.6.33.11.1.11 | llcfrcnvSRClearStatus | CXLlcFrConv-MIB |