| OID symbolic | OID numeric | Type | Access | Description |
|---|
| INT cxFsTftpTransfer | 1.3.6.1.4.1.495.2.1.5.3.1 | INTEGER | read-write | Used to control a TFTP server running on a sub-system.
Options:
disabled (1): For security reasons, no file transfer requests are accepted.
enabled (2): Requests to download files from the TFTP server are accepted.
Default Value: disabled (1)
Configuration Changed: operative |
| INT cxFsTftpTargetSlot | 1.3.6.1.4.1.495.2.1.5.3.2 | INTEGER | read-write | The slot number where a sub-system resides. All TFTP file transfer
packets are directed toward this sub-system.
Range of Values: 0 - 16
Note: A value of 0 is used for the sub-system where the TFTP server resides.
Default Value: 0
Configuration Changed: operative |
| INT cxFsTftpRemxt | 1.3.6.1.4.1.495.2.1.5.3.3 | INTEGER | read-write | Timeout (in seconds) between retransmissions of a TFTP packet whose
original transmission was unsuccessful.
Range of Values: 1 - 600
Default Value: 5 (seconds)
Configuration Changed: operative |
| INT cxFsIsBusy | 1.3.6.1.4.1.495.2.1.5.3.4 | INTEGER | read-only | Indicates whether the file server is currently busy.
Options:
no (1): File server is unoccupied. File transfer requests can be sent.
yes (2): File server is busy. Any activities such as file transfer or file
list requests initiated at this time will likely be unsuccessful. |
| INT cxFsBackGroundCleanup | 1.3.6.1.4.1.495.2.1.5.3.5 | INTEGER | read-write | Used to enable or disable a continuous clean-up process which makes file
server resources re-usable. When enabled, this process runs continuously
as a background operation.
Options:
disabled (1): File server resources remain allocated to the activity or
application that originally used them, even if they are no longer
required.
enabled (2): File server resources are dynamically reallocated to new
activities or applications each time they are freed from their current use.
Default Value: enabled (2)
Related Objects:
cxFsCleanupOnce
Configuration Changed: operative |
| INT cxFsCleanupOnce | 1.3.6.1.4.1.495.2.1.5.3.6 | INTEGER | write-only | Initiates a clean-up of the file server to free up resources that are
still allocated to activities or applications that no longer require them.
This process does not run continuously (as with 'cxFsBackGroundCleanup'),
but occurs once only each time it is initiated.
Options:
no (1): No clean-up initiated
yes (2): Clean-up initiated
Default Value: no (1)
Related Objects:
cxFsBackGroundCleanup
Configuration Changed: operative |
| INT cxFsFreeBytes | 1.3.6.1.4.1.495.2.1.5.3.7 | INTEGER | read-only | Shows the amount of space (in bytes) currently available on the local
file server. |
| STR cxFsDeleteFile | 1.3.6.1.4.1.495.2.1.5.3.8 | DisplayString | write-only | Used to specify the name of a file you wish to delete from the file
server.
Configuration Changed: operative |
| STR cxFsFileList | 1.3.6.1.4.1.495.2.1.5.3.9 | DisplayString | read-only | Contains a list of files currently stored on the file server. Filenames
are separated by a space character. |
| INT cxFsTransferDestSlot | 1.3.6.1.4.1.495.2.1.5.3.10 | INTEGER | read-write | The slot number where a sub-system resides. The file specified by the
object cxFsTransferFileName is either copied to this sub-system or
retrieved from this sub-system according to the action specified by the
object cxFsTransferAction.
Range of Values: 0 - 16
Note: 0 is reserved for the master card in the system.
Default Value: 0
Related Objects:
cxFsTransferFileName
cxFsTransferAction
Configuration Changed: operative |
| STR cxFsTransferFileName | 1.3.6.1.4.1.495.2.1.5.3.11 | DisplayString | read-write | Identifies the file to be retrieved from or copied to the sub-system
specified by the object 'cxFsTransferDestSlot'.
Range of Values: 5 to 15 characters
Related Objects:
cxFsTransferDestSlot
Configuration Changed: operative |
| INT cxFsTransferAction | 1.3.6.1.4.1.495.2.1.5.3.12 | INTEGER | read-write | Determines the type of file transfer action to be taken with the file
specified by the cxFsTransferFileName object.
The status of a transfer process can be obtained from the
cxFsTransferStatus object. Multiple simultaneous file transfers are not
supported. Therefore, if the value of the cxFsTransferStatus object is
'processing', no GET or PUT can be initiated.
Options:
no-action (1): No action taken with the specified file.
get (2): Retrieves the file specified by the cxFsTransferFileName object
from the slot specified by the cxFsTransferDestSlot object to the master
card.
put (3): Copies the file specified by the cxFsTransferFileName object from
the master card to the slot specified by the cxFsTransferDestSlot object.
Default Value: no-action (1)
Related Objects:
cxFsTransferFileName
cxFsTransferDestSlot
cxFsTransferStatus
Configuration Changed: operative |
| INT cxFsTransferStatus | 1.3.6.1.4.1.495.2.1.5.3.13 | INTEGER | read-only | The status of the last file transfer action initiated using the
cxFsTransferAction object.
Options:
idle (1): No file transfer in progress. The last file transfer has either
completed successfully or failed and been aborted.
processing (2): File transfer in progress.
succeeded (3): No file transfer in progress. The last file transfer was
completed successfully.
failed (4): No file transfer in progress. The last file transfer failed
and was aborted.
Related Objects:
cxFsTransferFileName
cxFsTransferDestSlot
cxFsTransferAction
cxFsTransferErrorCode |
| INT cxFsTransferErrorCode | 1.3.6.1.4.1.495.2.1.5.3.14 | INTEGER | read-only | Indicates whether any errors occurred during the last file transfer
action initiated using the 'cxFsTransferAction' object. The
cxFsTransferErrorCode object also indicates the nature of any errors that
occur during file transfer.
Options:
not-applicable (1): No action taken; therefore, no error generated.
ok (2): No errors. The last file transfer operation was successfully
completed.
local-open-error (3): Could not open the local file for which a PUT or GET
command was issued.
nfs-open-error (4): Could not open the remote file for which a PUT or GET
command was issued.
local-reading-error (5): Either a local file for which a PUT command was
issued could not be read, or a remote file obtained through a GET command
could not be read locally.
nfs-reading-error (6): Either a remote file PUT to a destination slot
could not be read at that location, or a remote file for which a GET
command was issued could not be read in the remote slot.
local-writing-error (7): The 'cxFsTransferAction' object was unable to
copy the specified file to the local directory.
nfs-writing-error (8): The 'cxFsTransferAction' object was unable to copy
the specified file to the destination directory.
local-close-error (9): Could not close local file used in either a GET or
PUT action.
nfs-close-error (10): Could not close a remote file used in either a GET
or PUT action.
other-error (11): An unspecified error (other than those listed above)
occurred.
Related Objects:
cxFsTransferAction
cxFsTransferFileName
cxFsTransferDestSlot
cxFsTransferStatus |
