All MIBs › CXFileServer-MIB › cxFsTransferAction
cxFsTransferAction
Module: CXFileServer-MIB
OID (symbolic): CXFileServer-MIB::cxFsTransferAction
OID (numeric): 1.3.6.1.4.1.495.2.1.5.3.12
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: Determines the type of file transfer action to be taken with the file specified by the cxFsTransferFileName object.
The status of a transfer process can be obtained from the cxFsTransferStatus object. Multiple simultaneous file transfers are not supported. Therefore, if the value of the cxFsTransferStatus object is 'processing', no GET or PUT can be initiated.
Options: no-action (1): No action taken with the specified file.
get (2): Retrieves the file specified by the cxFsTransferFileName object from the slot specified by the cxFsTransferDestSlot object to the master card.
put (3): Copies the file specified by the cxFsTransferFileName object from the master card to the slot specified by the cxFsTransferDestSlot object.
Default Value: no-action (1)
Related Objects: cxFsTransferFileName cxFsTransferDestSlot cxFsTransferStatus
Configuration Changed: operative
What is cxFsTransferAction?
This object triggers a file transfer action for the file named in cxFsTransferFileName: no-action, get (retrieve the file from the destination slot to the master card), or put (copy the file from the master card to the destination slot); only one transfer can run at a time, and a new GET or PUT is blocked while cxFsTransferStatus reads processing. Admins set this to start a file copy in either direction between the master card and a target slot. For example, an admin distributing a firmware image to slot 3 would set cxFsTransferDestSlot and cxFsTransferFileName first, then set cxFsTransferAction to put(3) to start the copy.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.495.2.1.5.3.12 snmpwalk -v2c -c public <target> CXFileServer-MIB::cxFsTransferAction
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.495.2.1.5.3.12.1 snmpget -v2c -c public <target> CXFileServer-MIB::cxFsTransferAction.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.495.2.1.5.3.12.1 i <value>
Start monitoring CX Memotec network device (TFTP file management) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CXFileServer-MIB::cxFsTransferAction OID value, configure state conditions and alerts, and monitor any CX Memotec network device (TFTP file management) from a single console.
OID Breakdown
Upper-level ancestors (11 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.495 | memotec | MEMOTEC-SMI |
| 1.3.6.1.4.1.495.2 | memotecProducts | MEMOTEC-SMI |
| 1.3.6.1.4.1.495.2.1 | cxProduct | MEMOTEC-SMI |
| 1.3.6.1.4.1.495.2.1.5 | cxSystem | CXProduct-SMI |
| 1.3.6.1.4.1.495.2.1.5.3 | cxFileServer | CXProduct-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.495.2.1.5.3.12 | cxFsTransferAction | CXFileServer-MIB |