| OID symbolic | OID numeric | Type | Access | Description |
|---|
| ADR dspCuAddress | 1.3.6.1.4.1.495.2.1.6.57.2.1.2 | DspCuAddress | read-only | Identifies the address of this controller unit.
The address has to be unique for a specified sap. |
| INT dspCuApplicationId | 1.3.6.1.4.1.495.2.1.6.57.2.1.12 | INTEGER | read-write | Indicates an application running on the host associated
with the controller unit/device. |
| ADR dspCuCalledX25Address | 1.3.6.1.4.1.495.2.1.6.57.2.1.6 | X25Address | read-write | Identifies the X25 address of the remote device. |
| ADR dspCuCallingX25Address | 1.3.6.1.4.1.495.2.1.6.57.2.1.5 | X25Address | read-write | Identifies the X25 address of this sap. This address is unique for all
devices attached to this sap, TIU side |
| CTR dspCuClears | 1.3.6.1.4.1.495.2.1.6.57.2.1.42 | Counter | read-only | Identifies the number of Clear Request received from the SNALC layer. |
| CTR dspCuClearsInd | 1.3.6.1.4.1.495.2.1.6.57.2.1.43 | Counter | read-only | Identifies the number of Clear Indications sent to the SNALC layer. |
| INT dspCuControl | 1.3.6.1.4.1.495.2.1.6.57.2.1.25 | INTEGER | write-only | Control associated with the specified service access point. |
| DSP dspCuDSPCircuitType | 1.3.6.1.4.1.495.2.1.6.57.2.1.8 | DspCircuitType | read-write | Identifies the connection as being either only one connection or
multiple DSP connections per X.25 virtual circuit The valid values follow:
singUsr-NoReq Circ - single user per X25 svc, no circuit request. The LCN
is 0.
singUsr-ReqCirc - single user per X25 svc, circuit request. The LCN is
negociated during the connection establishment.
multUser-ReqCirc - multiple user per X25 svc. Each user has a LCN and
the LCN is negociated individually.
MES-Usr-ReqCirc - Modified Bisync single user per X25 svc, circuit request.
The LCN is negociated during the connection establishment. |
| dspCuEntry | 1.3.6.1.4.1.495.2.1.6.57.2.1 | | not-accessible | The parameters for a particular controller unit. |
| OCT dspCuFacility | 1.3.6.1.4.1.495.2.1.6.57.2.1.11 | OCTET STRING | read-write | Specifies the facility codes and facility parameters put in the facilities field of the call
call request packet during call set-up.
The maximum number of facility codes and parameters that may be specified is 20. |
| CTR dspCuInvToClear | 1.3.6.1.4.1.495.2.1.6.57.2.1.44 | Counter | read-only | Identifies the number of INVITATION TO CLEAR packets
received by this controller. |
| DSP dspCuOperationalMode | 1.3.6.1.4.1.495.2.1.6.57.2.1.31 | DspOperationalMode | read-only | Identifies the controller unit as being
active or non-active with the new configuration. |
| PAC dspCuPacketSize | 1.3.6.1.4.1.495.2.1.6.57.2.1.14 | PacketSize | read-write | The receive and transmit packet size. |
| DSP dspCuPartner | 1.3.6.1.4.1.495.2.1.6.57.2.1.16 | DspPartner | read-write | This object identifies the knowledge DSP has about its BSC partner layer
and applies to the controllers acting as Terminal Interface. In normal conditions,
the DSP and BSC layers are configured both having the same interface type (HIU
or TIU). This is the default configuration and it enables the controller the be
the initiator of the X25 connection. The host can't establish an X25 connection
in this configuration.
When the Host is the call establishment initiator, this object could be
configured as Host (HIU) type and the local BSC as (TIU), meaning that the DSP
will behave as a HIU during the call establishment. This object is used just
during the call establishment. There are the following options available:
terminal-terminal DSP and BSC layers are configured as hosts.
host-terminal DSP is configured as host and behaves as a terminal. BSC is configured
as a terminal. |
| INT dspCuReqMode | 1.3.6.1.4.1.495.2.1.6.57.2.1.13 | INTEGER | read-only | Identifies the connection request mode. The
following modes are available :
Fixed Class Crm : destination is selected automatically
Specific Class Crm : select a destination by cu/dev
addresses.
Non-Specific Class Crm : select a destination by
address and application ID.
Associated Device Crm : associate a device with an
existing connection.
The terminal DSP uese the Only the 'fixedClassCrm'
could be supported by this implementation. |
| DSP dspCuRowStatus | 1.3.6.1.4.1.495.2.1.6.57.2.1.3 | DspRowStatus | read-write | Indicates whether the particular service access point is
configured within the MIB. Controller unit entries (rows)
may be created by setting this object value to 'valid',
or deleted by changing this object value to 'invalid'.
Whether or not the row actually disappears is left to the
implementation so this object may actually read as 'invalid'
for some arbitrary length of time. |
| SAP dspCuSapNumber | 1.3.6.1.4.1.495.2.1.6.57.2.1.1 | SapIndex | read-only | Identifies the sap associated with this controller unit.
Each controller unit has an address and the address has to
be unique with one sap. However, the address is not required
to be unique between saps This object is an index in the
sap Table. Values are unique. |
| INT dspCuState | 1.3.6.1.4.1.495.2.1.6.57.2.1.30 | INTEGER | read-only | Control associated with the specified service access point. |
| dspCuTable | 1.3.6.1.4.1.495.2.1.6.57.2 | | not-accessible | A table containing configuration information about
all the 3270 controller units. |
| THR dspCuThroughput | 1.3.6.1.4.1.495.2.1.6.57.2.1.15 | ThruputClass | read-write | The receive and transmit throughput class across the line. |
| INT dspCuType | 1.3.6.1.4.1.495.2.1.6.57.2.1.4 | INTEGER | read-write | Identifies the type of controller: either TIU or HIU. |
| STR dspCuUserData | 1.3.6.1.4.1.495.2.1.6.57.2.1.10 | DisplayString | read-write | The user data put in the call user data field of call request packets. |
| INT dspCuWindow | 1.3.6.1.4.1.495.2.1.6.57.2.1.9 | INTEGER | read-write | Defines the receive window size used for packets. At the source side, it
defines the window for packets received from the source interface. At the
destination side, it defines the window for packets transmitted to the
the source side, it defines the window for packets transmitted to the source interface.
At the destination side, it defines the window for packets received from the destination
interface. Allowable value are '1'-'7' for modulo 8. |
| CTR dspCuX25CallAccept | 1.3.6.1.4.1.495.2.1.6.57.2.1.41 | Counter | read-only | Identifies the number of X25 Call Accept packets received
by this controller. |
| CTR dspCuX25CallRequest | 1.3.6.1.4.1.495.2.1.6.57.2.1.40 | Counter | read-only | Identifies the number of X25 Call Request packets received
by this controller. |
| CTR dspDevAck | 1.3.6.1.4.1.495.2.1.6.57.3.1.48 | Counter | read-only | Identifies the number of ACK packets sent by the device. Both host and
terminal DSPs can sent ACK packets. |
| ADR dspDevAddress | 1.3.6.1.4.1.495.2.1.6.57.3.1.3 | DspDevAddress | read-only | Identifies the address of this device. The
address has to be unique for a specified for
a controller unit. |
| INT dspDevAttPrnt | 1.3.6.1.4.1.495.2.1.6.57.3.1.9 | INTEGER | read-write | Identifies wheather the device has a printer attached.
The device could be a display in order to have a printer
attached. |
| INT dspDevCharSet | 1.3.6.1.4.1.495.2.1.6.57.3.1.10 | INTEGER | read-write | Identifies the support of different character sets. |
| CTR dspDevCircuitDisconnect | 1.3.6.1.4.1.495.2.1.6.57.3.1.55 | Counter | read-only | Identifies the number of DISCONNECT packets received by
the device. |
| CTR dspDevCircuitEnabled | 1.3.6.1.4.1.495.2.1.6.57.3.1.53 | Counter | read-only | Identifies the number of CIRCUIT ENABLED packets received by
the device. |
| CTR dspDevCircuitRequest | 1.3.6.1.4.1.495.2.1.6.57.3.1.54 | Counter | read-only | Identifies the number of CIRCUIT REQUEST packets received by
the device. |
| CTR dspDevCmdRspAbort | 1.3.6.1.4.1.495.2.1.6.57.3.1.45 | Counter | read-only | Identifies the number of COMAMND/RESPONSE ABORTED packets.
This object notifies how many packets were aborted by this device.
The host DSP counts the number of COMMAND ABORTED packets
received. The terminal DSP counts the number of RESPONSE ABORTED
packets received.. The error code of the last received packet
(COMMAND/REPONSE) is kept by the object dspDevCmdRspAbortReason. |
| INT dspDevCmdRspAbortReason | 1.3.6.1.4.1.495.2.1.6.57.3.1.46 | INTEGER | read-only | This object keeps the error code of the last COMAMND/RESPONSE
ABORTED packet received. When conected to another Memotec
device, all the abort cases are managed locally by BSC. |
| CTR dspDevCmdRspUndel | 1.3.6.1.4.1.495.2.1.6.57.3.1.43 | Counter | read-only | Identifies the number of COMAMND/RESPONSE
UNDELIVERED packets. This object notifies how many packets
were rejected by this device. The host DSP counts the number
of COMMAND ABORTED packets received. The terminal DSP
counts the number of RESPONSE ABORTED packets received.. The
error code of the last received packet (COMMAND/REPONSE) is
kept by the object 'dspDevCmdRspUndelReason'. |
| INT dspDevCmdRspUndelReason | 1.3.6.1.4.1.495.2.1.6.57.3.1.44 | INTEGER | read-only | This object keeps the error code of the last COMAMND/RESPONSE
UNDELIVERED packet received. When conected to another Memotec
device, only the 'wack' reason code could be received. All other
error codes are managed locally by BSC. |
| INT dspDevColour | 1.3.6.1.4.1.495.2.1.6.57.3.1.11 | INTEGER | read-write | Identifies wheather the device supports colours. |
| CTR dspDevCommand | 1.3.6.1.4.1.495.2.1.6.57.3.1.41 | Counter | read-only | Identifies the number of COMAMND packets sent/received
by the device. Only the host sends the COMMAND packets.
The host DSP counts the number of packets sent. The
terminal DSP counts the number of packets received. |
| INT dspDevControl | 1.3.6.1.4.1.495.2.1.6.57.3.1.20 | INTEGER | write-only | Control associated with the specified service access point. |
| ADR dspDevCuAddress | 1.3.6.1.4.1.495.2.1.6.57.3.1.2 | DspCuAddress | read-only | Identifies the address of the controller unit
to which this device is attached. |
| INT dspDevDPmode | 1.3.6.1.4.1.495.2.1.6.57.3.1.13 | INTEGER | read-write | Identifies wheather the device is a display or printer. |
| dspDevEntry | 1.3.6.1.4.1.495.2.1.6.57.3.1 | | not-accessible | The parameters for a particular controller unit. |
| INT dspDevFormatSize | 1.3.6.1.4.1.495.2.1.6.57.3.1.8 | INTEGER | read-write | Describes the number of characters suported by the device. |
| INT dspDevInvClearReason | 1.3.6.1.4.1.495.2.1.6.57.3.1.50 | INTEGER | read-only | This object keeps the error code of the last COMAMND/RESPONSE
ABORTED packet received. |
| CTR dspDevInvToClear | 1.3.6.1.4.1.495.2.1.6.57.3.1.49 | Counter | read-only | Identifies the number of INVITATION TO CLEAR packets received
by the device. |
| DSP dspDevOperationalMode | 1.3.6.1.4.1.495.2.1.6.57.3.1.30 | DspOperationalMode | read-only | Identifies the controller unit as being active or non-active
with the new configuration. |
| ADR dspDevRemoteCuAddress | 1.3.6.1.4.1.495.2.1.6.57.3.1.6 | DspCuAddress | read-write | Identifies the address of remote controller unit
to which this device is connected. This object is set
to 0 if no connection is established. |
| ADR dspDevRemoteDevAddress | 1.3.6.1.4.1.495.2.1.6.57.3.1.7 | DspDevAddress | read-write | Identifies the address of remote controller unit
to which this device is connected. This object is set
to 0 if no connection is established. |
| CTR dspDevReset | 1.3.6.1.4.1.495.2.1.6.57.3.1.51 | Counter | read-only | Identifies the number of RESET packets received by the device. |
| INT dspDevResetReason | 1.3.6.1.4.1.495.2.1.6.57.3.1.52 | INTEGER | read-only | This object keeps the error code of the last RESET packet received.. |
| CTR dspDevResponse | 1.3.6.1.4.1.495.2.1.6.57.3.1.42 | Counter | read-only | Identifies the number of RESPONSE packets sent/received
by the device. Only the termianl sends RESPONSE packets.
The host DSP counts the number of packets received. The
terminal DSP counts the number of packets sent. |
| INT dspDevRowStatus | 1.3.6.1.4.1.495.2.1.6.57.3.1.4 | INTEGER | read-write | Indicates whether the particular service access
point is configured within the MIB. Controller unit
entries (rows) may be created by setting this object
value to 'valid', or deleted by changing this
object value to 'invalid'. Whether or not the row
actually disappears is left to the implementation so this
object may actually read as 'invalid' for some
arbitrary length of time. |
| SAP dspDevSapNumber | 1.3.6.1.4.1.495.2.1.6.57.3.1.1 | SapIndex | read-only | Identifies the sap to which this device
is attached to. |
| INT dspDevSense | 1.3.6.1.4.1.495.2.1.6.57.3.1.33 | INTEGER | read-only | This object contains the 'Sense' byte, defined by the BSC
protocol for 3270 controller unit family. This object and
the 'bscDevSense ' contain the result of the last operations
performed on the device. The controller unit is responsable to
set properly this byte. |
| INT dspDevState | 1.3.6.1.4.1.495.2.1.6.57.3.1.31 | INTEGER | read-only | Indicates the state of the conection. The state 'invalid'
means there is no connection. The state 'conected' means
the connection is established. |
| CTR dspDevStatStatus | 1.3.6.1.4.1.495.2.1.6.57.3.1.47 | Counter | read-only | Identifies the number of STATUS packets sent/received. Only the terminal
sends this packet. The terminal DSP counts the number of packets sent. The
host DSP counts the number of packets received. |
| INT dspDevStatus | 1.3.6.1.4.1.495.2.1.6.57.3.1.32 | INTEGER | read-only | This object contains the 'Status' byte, defined by the BSC
protocol for 3270 controller unit family. This object and the
'bscDevSense ' contain the result of the last operations
performed on the device. The controller unit is responsable to
set properly this byte. |
| dspDevTable | 1.3.6.1.4.1.495.2.1.6.57.3 | | not-accessible | A table containing configuration information about
all the devices controlled by this module. |
| INT dspDevTTextSupport | 1.3.6.1.4.1.495.2.1.6.57.3.1.12 | INTEGER | read-write | Identifies whether it the device supports transparent text. |
| INT dspDevUCN | 1.3.6.1.4.1.495.2.1.6.57.3.1.5 | INTEGER | read-only | Identifies a specific connection. |
| ALI dspSapAlias | 1.3.6.1.4.1.495.2.1.6.57.1.1.4 | Alias | read-write | Identifies the service access point by a textual
name. Names are unique per service access point. |
| ALI dspSapCompanionAlias | 1.3.6.1.4.1.495.2.1.6.57.1.1.5 | Alias | read-write | Identifies the `lower' service access point that
will communicate with this service access point by
a textual name.
Names are unique per service access point. Used to
bind the DSP Sap with the X25 sap. |
| INT dspSapControl | 1.3.6.1.4.1.495.2.1.6.57.1.1.20 | INTEGER | write-only | Control associated with the specified service access point. |
| INT dspSapEbcdicAsciiMode | 1.3.6.1.4.1.495.2.1.6.57.1.1.7 | INTEGER | read-write | Indicates the character set used by the device defined
for this association. The character set could be a
EBCDIC or ASCII. |
| dspSapEntry | 1.3.6.1.4.1.495.2.1.6.57.1.1 | | not-accessible | The parameters for a particular service access point. |
| SAP dspSapNumber | 1.3.6.1.4.1.495.2.1.6.57.1.1.1 | SapIndex | read-only | Identifies the service access point by a numerical value.
This value is used as a index in the saps table. Values are unique
per service access point. |
| DSP dspSapOperationalMode | 1.3.6.1.4.1.495.2.1.6.57.1.1.30 | DspOperationalMode | read-only | Identifies the service access point as being
active or non-active with the new configuration. |
| DSP dspSapRowStatus | 1.3.6.1.4.1.495.2.1.6.57.1.1.2 | DspRowStatus | read-write | Indicates whether the particular service access
point is configured within the MIB Service access
point entries (rows) may be created by setting this
object value to 'valid', or deleted by changing this
object value to 'invalid'. Whether or not the row
actually disappears is left to the implementation so this
object may actually read as 'invalid' for some arbitrary
length of time. |
| INT dspSapSnalcRef | 1.3.6.1.4.1.495.2.1.6.57.1.1.6 | INTEGER | read-write | Identifies which upper sap is associated to the lower sap within the DSP
module. Applies only to lower DSP saps (X25 sap). |
| dspSapTable | 1.3.6.1.4.1.495.2.1.6.57.1 | | not-accessible | A table containing configuration information
about all the service access point. |
| INT dspSapType | 1.3.6.1.4.1.495.2.1.6.57.1.1.3 | INTEGER | read-write | Identifies the service access point by type:'lower'
identifies a SAP leading to a physical X25 port.
'Upper' identifies a SAP acting as an internal
inter-layer logical port. |
