All MIBs › CXDSP-MIB › dspCuPartner
dspCuPartner
Module: CXDSP-MIB
OID (symbolic): CXDSP-MIB::dspCuPartner
OID (numeric): 1.3.6.1.4.1.495.2.1.6.57.2.1.16
Node type: OBJECT-TYPE
Type: DspPartner
Access: read-write
Description: This object identifies the knowledge DSP has about its BSC partner layer and applies to the controllers acting as Terminal Interface. In normal conditions, the DSP and BSC layers are configured both having the same interface type (HIU or TIU). This is the default configuration and it enables the controller the be the initiator of the X25 connection. The host can't establish an X25 connection in this configuration. When the Host is the call establishment initiator, this object could be configured as Host (HIU) type and the local BSC as (TIU), meaning that the DSP will behave as a HIU during the call establishment. This object is used just during the call establishment. There are the following options available: terminal-terminal DSP and BSC layers are configured as hosts. host-terminal DSP is configured as host and behaves as a terminal. BSC is configured as a terminal.
What is dspCuPartner?
This identifies what DSP believes about its BSC partner layer during call establishment: terminal-terminal means both layers are configured as hosts (the controller initiates the X.25 connection, as normal), while host-terminal means DSP behaves as a host so the remote host can initiate the connection instead. Set it to host-terminal only when the host side, not the controller, needs to be the one establishing the X.25 call.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.495.2.1.6.57.2.1.16 snmpwalk -v2c -c public <target> CXDSP-MIB::dspCuPartner
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.495.2.1.6.57.2.1.16.1 snmpget -v2c -c public <target> CXDSP-MIB::dspCuPartner.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.495.2.1.6.57.2.1.16.1 s <value>
Start monitoring Aastra/CX Memotec voice gateway (DSP voice channel module) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CXDSP-MIB::dspCuPartner OID value, configure state conditions and alerts, and monitor any Aastra/CX Memotec voice gateway (DSP voice channel module) from a single console.
OID Breakdown
Upper-level ancestors (11 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.495 | memotec | MEMOTEC-SMI |
| 1.3.6.1.4.1.495.2 | memotecProducts | MEMOTEC-SMI |
| 1.3.6.1.4.1.495.2.1 | cxProduct | MEMOTEC-SMI |
| 1.3.6.1.4.1.495.2.1.6 | cxApplication | CXProduct-SMI |
| 1.3.6.1.4.1.495.2.1.6.57 | cxDsp | CXProduct-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.495.2.1.6.57.2 | dspCuTable | CXDSP-MIB |
| 1.3.6.1.4.1.495.2.1.6.57.2.1 | dspCuEntry | CXDSP-MIB |
| 1.3.6.1.4.1.495.2.1.6.57.2.1.16 | dspCuPartner | CXDSP-MIB |