ASCOM-IPDECT-MIB

All MIBs › ASCOM-IPDECT-MIB

Organization: Ascom Sweden AB

Last Updated: 2013-10-07

Category: Telephony and VoIP, Wireless and WLAN

Description: Manages ASCOM IP-DECT wireless telephony base stations, handsets, and call routing.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is ASCOM-IPDECT-MIB?

ASCOM-IPDECT-MIB is an Ascom Sweden AB (enterprise OID 27614) proprietary MIB for the IP-DECT wireless-telephony base-station system, reporting fault and alarm logs. Its objects cover fault-log/alarm-log entry counts, last error code, a fault-log table (index, date, time, activity, code, severity, source, IP, description), an active-alarms table (index, date, time, code, severity, source, IP, description), and a cold-start notification. As a status/notification MIB it lets an administrator review fault history and active alarms, and get alerted on device restarts, on an Ascom IP-DECT base station. It is deployed on Ascom Sweden AB IP-DECT wireless-telephony equipment. Engineers can download the ASCOM-IPDECT-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in ASCOM-IPDECT-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Ascom Sweden AB IP-DECT wireless-telephony equipment

Monitoring Examples

An administrator checks ipDectActiveAlarmsTable and ipDectFaultCode to review active alarms and fault history on an Ascom IP-DECT base station.

What Can Be Monitored

fault/alarm log history and device restart events

Imported Objects

From RFC1213-MIB

ifIndex

From SNMPv2-CONF

OBJECT-GROUP

From SNMPv2-SMI

IpAddress
MODULE-IDENTITY
NOTIFICATION-TYPE
OBJECT-TYPE
enterprises

How to Use in IPNetwork Monitor

Example using ipDectFaultLogEntries OID:

Select an Ascom (Sweden) IP-DECT wireless-telephony base station (legacy) as the target host to create a monitor — the SNMP service should be up and running on it. Click New Monitor, then check SNMP Custom on the Favorites tab, click Next, and confirm the host. On the next page, click Select... to open the built-in SNMP MIB Browser and type ipDectFaultLogEntries into the Find box to locate it in the OID tree, then select it and click OK. It reports the number of rows in ipDectFaultLogTable. On the monitor's Main parameters page you can set the target's SNMP port (default 161), credentials, polling interval, and other settings — see the SNMP Monitor help for details. On the State conditions and Alerting tabs, configure when the monitor should change state and trigger an alert; since this is an INTEGER-type OID, Value bounds is the most useful condition here — trigger an alert if the count changes from its expected baseline, since that would indicate the underlying set of items changed unexpectedly. Click Finish to create the monitor; you can adjust any parameter later.

OIDs

OID symbolic	OID numeric	Type	Access	Description
ascom	1.3.6.1.4.1.27614
ascomTraps	1.3.6.1.4.1.27614.0
NTF ascomColdStart	1.3.6.1.4.1.27614.0.0			A power cycle took place.
NTF ascomWarmStart	1.3.6.1.4.1.27614.0.1			The device has been reset administratively.
NTF ascomLinkDown	1.3.6.1.4.1.27614.0.2			An interface link went down.
NTF ascomLinkUp	1.3.6.1.4.1.27614.0.3			An interface link went up.
NTF ascomAuthenticationFailure	1.3.6.1.4.1.27614.0.4			An SNMP PDU with a wrong community string has been received.
NTF ipDectSetCriticalAlarmTrap	1.3.6.1.4.1.27614.0.11			This trap is sent when a critical alarm has been set.
NTF ipDectSetMajorAlarmTrap	1.3.6.1.4.1.27614.0.12			This trap is sent when a major alarm has been set.
NTF ipDectSetMinorAlarmTrap	1.3.6.1.4.1.27614.0.13			This trap is sent when a minor alarm has been set.
NTF ipDectSetIndeterminateAlarmTrap	1.3.6.1.4.1.27614.0.14			This trap is sent when an indeterminate alarm has been set.
NTF ipDectClearAlarmTrap	1.3.6.1.4.1.27614.0.15			This trap is sent when an indeterminate alarm has been cleared.
NTF ipDectCriticalFaultTrap	1.3.6.1.4.1.27614.0.16			This trap is sent when a critical error has occurred.
NTF ipDectMajorFaultTrap	1.3.6.1.4.1.27614.0.17			This trap is sent when a major error has occurred.
NTF ipDectMinorFaultTrap	1.3.6.1.4.1.27614.0.18			This trap is sent when a minor error has occurred..
NTF ipDectIndeterminateFaultTrap	1.3.6.1.4.1.27614.0.19			This trap is sent when an indeterminate error has occurred.
ascomMibs	1.3.6.1.4.1.27614.1
ascomIpdect	1.3.6.1.4.1.27614.1.1
ascomIpdectMIB	1.3.6.1.4.1.27614.1.1.1			Updated ipDectFaultCode, ipDectAlarmCode
ipDectAttr	1.3.6.1.4.1.27614.1.1.1.1
INT ipDectFaultLogEntriesEx	1.3.6.1.4.1.27614.1.1.1.1.1	INTEGER	read-only	Number of rows in ipDectFaultLogTable.
INT ipDectAlarmLogEntries	1.3.6.1.4.1.27614.1.1.1.1.2	INTEGER	read-only	Number of rows in ipDectActiveAlarmsTable.
INT ipDectLastErrorCode	1.3.6.1.4.1.27614.1.1.1.1.3	INTEGER	read-only	Last error code reported in one of the traps.
ipDectFaults	1.3.6.1.4.1.27614.1.1.1.2
ipDectFaultLogTable	1.3.6.1.4.1.27614.1.1.1.2.1		not-accessible	Table used for reading the fault log.
ipDectFaultLogEntry	1.3.6.1.4.1.27614.1.1.1.2.1.1		not-accessible	Each entry in this table contains an entry from the fault log.
INT ipDectFaultIndex	1.3.6.1.4.1.27614.1.1.1.2.1.1.1	INTEGER	read-only	The entry's position in the list.
OCT ipDectFaultDate	1.3.6.1.4.1.27614.1.1.1.2.1.1.2	OCTET STRING	read-only	Date the fault occurred.
OCT ipDectFaultTime	1.3.6.1.4.1.27614.1.1.1.2.1.1.3	OCTET STRING	read-only	Time of day the fault occurred.
INT ipDectFaultActivity	1.3.6.1.4.1.27614.1.1.1.2.1.1.4	INTEGER	read-only	Event, set or cleared.
INT ipDectFaultCode	1.3.6.1.4.1.27614.1.1.1.2.1.1.5	INTEGER	read-only	Fault code.
INT ipDectFaultSeverity	1.3.6.1.4.1.27614.1.1.1.2.1.1.6	INTEGER	read-only	Indeterminate, major or critical.
OCT ipDectFaultSource	1.3.6.1.4.1.27614.1.1.1.2.1.1.7	OCTET STRING	read-only	The source of the fault.
IP ipDectFaultIp	1.3.6.1.4.1.27614.1.1.1.2.1.1.8	IpAddress	read-only	The IP address where the fault occurred.
OCT ipDectFaultDescription	1.3.6.1.4.1.27614.1.1.1.2.1.1.9	OCTET STRING	read-only	Textual description of the fault.
ipDectActiveAlarmsTable	1.3.6.1.4.1.27614.1.1.1.2.2		not-accessible	Table used for reading the active alarms.
ipDectActiveAlarmsEntry	1.3.6.1.4.1.27614.1.1.1.2.2.1		not-accessible	Each entry in this table contains an entry from the active alarms list.
INT ipDectActiveAlarmsIndex	1.3.6.1.4.1.27614.1.1.1.2.2.1.1	INTEGER	read-only	The entry's position in the list.
OCT ipDectAlarmDate	1.3.6.1.4.1.27614.1.1.1.2.2.1.2	OCTET STRING	read-only	Date the fault occurred.
OCT ipDectAlarmTime	1.3.6.1.4.1.27614.1.1.1.2.2.1.3	OCTET STRING	read-only	Time of day the fault occurred.
INT ipDectAlarmCode	1.3.6.1.4.1.27614.1.1.1.2.2.1.4	INTEGER	read-only	Fault code.
INT ipDectAlarmSeverity	1.3.6.1.4.1.27614.1.1.1.2.2.1.5	INTEGER	read-only	Indeterminate, major or critical.
OCT ipDectAlarmSource	1.3.6.1.4.1.27614.1.1.1.2.2.1.6	OCTET STRING	read-only	The source of the fault.
IP ipDectAlarmIp	1.3.6.1.4.1.27614.1.1.1.2.2.1.7	IpAddress	read-only	The IP-address where the fault occurred.
OCT ipDectAlarmDescription	1.3.6.1.4.1.27614.1.1.1.2.2.1.8	OCTET STRING	read-only	Textual description of the fault.

RFC description

Manages fault and alarm codes for Ascom IPDect wireless telephony systems.

Start monitoring Ascom (Sweden) IP-DECT wireless-telephony base stations (legacy) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download ASCOM-IPDECT-MIB