A3COM-HUAWEI-VODIALCONTROL-MIB

All MIBs › A3COM-HUAWEI-VODIALCONTROL-MIB

Organization: Huawei-3COM Technologies Co., Ltd.

Last Updated: 2005-03-15

Category: Telephony and VoIP, Vendor: H3C/HH3C

Description: Manages dial control and call routing configuration on H3C/3Com voice gateways, including dial peer definitions, destination patterns, and voice port assignments.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is A3COM-HUAWEI-VODIALCONTROL-MIB?

This MIB manages dial control and call-routing configuration on H3C/3Com voice gateways, defining how inbound/outbound calls are matched to voice ports. It exposes configuration objects for dial peers, destination number patterns, and voice-port assignments used to route calls across the gateway. It is primarily a configuration MIB rather than a hardware-telemetry one, but exposing the operational dial-peer table lets an operator verify that call-routing rules are correctly provisioned and active, a prerequisite for voice service to function. It works alongside A3COM-HUAWEI-VOICE-IF-MIB (voice port settings) and the call-history/active-call MIBs for a complete voice-gateway picture. It is deployed on H3C/3Com voice gateways and routers providing PSTN/VoIP interworking. Network engineers evaluating or troubleshooting this functionality can download the A3COM-HUAWEI-VODIALCONTROL-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in A3COM-HUAWEI-VODIALCONTROL-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

H3C/3Com voice gateways

Monitoring Examples

No sample object names were provided; based on the module description, an admin would expect a dial-peer table indexed by peer ID with columns for destination pattern and assigned voice port, polled to confirm that a given dialed number correctly resolves to the intended outbound port or trunk group, catching misrouted calls or gaps in the dial plan.

What Can Be Monitored

dial peer definitions
destination number patterns
voice port assignment
dial-plan routing configuration

Imported Objects

From A3COM-HUAWEI-OID-MIB

h3cVoice

OBJECT-IDENTITY

From A3COM-HUAWEI-VO-TYPE-MIB

CodecType

From INET-ADDRESS-MIB

InetAddress
InetAddressType

From SNMPv2-SMI

Integer32
IpAddress
MODULE-IDENTITY
OBJECT-TYPE

From SNMPv2-TC

RowStatus

OIDs

OID symbolic	OID numeric	Type	Access	Description
h3cVoiceDialControl	1.3.6.1.4.1.43.45.1.10.2.39.5			This MIB file is to provide the definition of voice dial control configuration.
ROW h3cVoPeerCallerPermitRowStatus	1.3.6.1.4.1.43.45.1.10.2.39.5.1.5.1.2	RowStatus	read-create	This object is used to create, delete or modify a row in this table.
PHO h3cVoPeerCfgCalledNumberPlan	1.3.6.1.4.1.43.45.1.10.2.39.5.1.1.1.28	PhoneNumberPlan	read-create	This object indicates the numbering plan of called number of this dial peer.
PHO h3cVoPeerCfgCalledNumberType	1.3.6.1.4.1.43.45.1.10.2.39.5.1.1.1.26	PhoneNumberType	read-create	This object indicates the type of called number of this dial peer.
I32 h3cVoPeerCfgCalledNumSubstRule	1.3.6.1.4.1.43.45.1.10.2.39.5.1.1.1.31	Integer32	read-create	This object indicates number-substitute rule of called number.
h3cVoPeerCfgCallerPermitEntry	1.3.6.1.4.1.43.45.1.10.2.39.5.1.5.1		not-accessible	The entry of h3cVoPeerCfgCallerPermitTable.
OCT h3cVoPeerCfgCallerPermitNum	1.3.6.1.4.1.43.45.1.10.2.39.5.1.5.1.1	OCTET STRING	not-accessible	This object specifies permitted caller number.
h3cVoPeerCfgCallerPermitTable	1.3.6.1.4.1.43.45.1.10.2.39.5.1.5		not-accessible	The table contains permitted caller number in the specific voice entity for incoming call.
PHO h3cVoPeerCfgCallingNumberPlan	1.3.6.1.4.1.43.45.1.10.2.39.5.1.1.1.27	PhoneNumberPlan	read-create	This object indicates the numbering plan of calling number of this dial peer.
PHO h3cVoPeerCfgCallingNumberType	1.3.6.1.4.1.43.45.1.10.2.39.5.1.1.1.25	PhoneNumberType	read-create	This object indicates the type of calling number of this dial peer.
I32 h3cVoPeerCfgCallingNumSubstRule	1.3.6.1.4.1.43.45.1.10.2.39.5.1.1.1.30	Integer32	read-create	This object indicates number-substitute rule of calling number.
COD h3cVoPeerCfgCodec1st	1.3.6.1.4.1.43.45.1.10.2.39.5.1.1.1.5	CodecType	read-create	This object indicates the first desirable CODEC of speech of this dial peer.
COD h3cVoPeerCfgCodec2nd	1.3.6.1.4.1.43.45.1.10.2.39.5.1.1.1.6	CodecType	read-create	This object indicates the second desirable CODEC of speech of this dial peer.
COD h3cVoPeerCfgCodec3rd	1.3.6.1.4.1.43.45.1.10.2.39.5.1.1.1.7	CodecType	read-create	This object indicates the third desirable CODEC of speech of this dial peer.
COD h3cVoPeerCfgCodec4th	1.3.6.1.4.1.43.45.1.10.2.39.5.1.1.1.8	CodecType	read-create	This object indicates the forth desirable CODEC of speech of this dial peer.
OCT h3cVoPeerCfgDescription	1.3.6.1.4.1.43.45.1.10.2.39.5.1.1.1.24	OCTET STRING	read-create	This object indicates the textual description of this dial peer.
OCT h3cVoPeerCfgDesPattern	1.3.6.1.4.1.43.45.1.10.2.39.5.1.1.1.4	OCTET STRING	read-create	This object indicates the caller number of this dial peer.
I32 h3cVoPeerCfgDSCP	1.3.6.1.4.1.43.45.1.10.2.39.5.1.1.1.9	Integer32	read-create	This object indicates the DSCP(Different Service Code Point) value of voice packets.
FAX h3cVoPeerCfgFaxBaudrate	1.3.6.1.4.1.43.45.1.10.2.39.5.1.1.1.14	FaxBaudrateType	read-create	This object indicates the fax baudrate of this dial peer.
INT h3cVoPeerCfgFaxEcm	1.3.6.1.4.1.43.45.1.10.2.39.5.1.1.1.22	INTEGER	read-create	This object indicates whether the ECM(error correct mode) is enabled.
I32 h3cVoPeerCfgFaxLevel	1.3.6.1.4.1.43.45.1.10.2.39.5.1.1.1.13	Integer32	read-create	This object indicates the fax level of this dial peer.
I32 h3cVoPeerCfgFaxLocalTrainPara	1.3.6.1.4.1.43.45.1.10.2.39.5.1.1.1.15	Integer32	read-create	This object indicates the fax local train threshold of this dial peer.
FAX h3cVoPeerCfgFaxProtocol	1.3.6.1.4.1.43.45.1.10.2.39.5.1.1.1.16	FaxProtocolType	read-create	This object indicates the fax protocol of this dial peer.
INT h3cVoPeerCfgFaxSendNSFEnable	1.3.6.1.4.1.43.45.1.10.2.39.5.1.1.1.19	INTEGER	read-create	This object indicates whether sends NSF(non-standard faculty) to fax of this dial peer.
FAX h3cVoPeerCfgFaxSupportMode	1.3.6.1.4.1.43.45.1.10.2.39.5.1.1.1.20	FaxSupportModeType	read-create	This object indicates the fax support mode of this dial peer.
FAX h3cVoPeerCfgFaxTrainMode	1.3.6.1.4.1.43.45.1.10.2.39.5.1.1.1.21	FaxTrainMode	read-create	This object indicates the fax train mode of this dial peer.
I32 h3cVoPeerCfgIndex	1.3.6.1.4.1.43.45.1.10.2.39.5.1.1.1.1	Integer32	not-accessible	The index of a dial entity common table.
I32 h3cVoPeerCfgMaxCall	1.3.6.1.4.1.43.45.1.10.2.39.5.1.1.1.32	Integer32	read-create	The object indicates that this dial peer is bound with a tag that indicates a maximum call value.
INT h3cVoPeerCfgOutbandMode	1.3.6.1.4.1.43.45.1.10.2.39.5.1.1.1.12	INTEGER	read-create	This object indicates the DTMF(Dual Tone Multi-Frequency) outband type of this dial peer.
I32 h3cVoPeerCfgPriority	1.3.6.1.4.1.43.45.1.10.2.39.5.1.1.1.23	Integer32	read-create	This object indicates the priority of this dial peer.
ROW h3cVoPeerCfgRowStatus	1.3.6.1.4.1.43.45.1.10.2.39.5.1.1.1.2	RowStatus	read-create	This object is used to create, delete or modify a row in this table.
INT h3cVoPeerCfgSelectStop	1.3.6.1.4.1.43.45.1.10.2.39.5.1.1.1.29	INTEGER	read-create	This object indicates whether permitting the system to allocate alternative entities to establish a phone call.
INT h3cVoPeerCfgShutDown	1.3.6.1.4.1.43.45.1.10.2.39.5.1.1.1.10	INTEGER	read-create	This object indicates the current status of this dial peer.
I32 h3cVoPeerCfgT38FaxHRPackNum	1.3.6.1.4.1.43.45.1.10.2.39.5.1.1.1.17	Integer32	read-create	This object indicates the high speed redundancy packet numbers.
I32 h3cVoPeerCfgT38FaxLRPackNum	1.3.6.1.4.1.43.45.1.10.2.39.5.1.1.1.18	Integer32	read-create	This object indicates the low speed redundancy packet numbers.
INT h3cVoPeerCfgType	1.3.6.1.4.1.43.45.1.10.2.39.5.1.1.1.3	INTEGER	read-create	The type of voice entity.
INT h3cVoPeerCfgVADEnable	1.3.6.1.4.1.43.45.1.10.2.39.5.1.1.1.11	INTEGER	read-create	This object indicates whether the VAD(Voice Activity Detection) is enabled.
h3cVoPeerCommonConfigEntry	1.3.6.1.4.1.43.45.1.10.2.39.5.1.1.1		not-accessible	The entry of h3cVoPeerCommonConfigTable.
h3cVoPeerCommonConfigTable	1.3.6.1.4.1.43.45.1.10.2.39.5.1.1		not-accessible	This table contains the general voice peer information.
COD h3cVoPeerDefault1stCodecLevel	1.3.6.1.4.1.43.45.1.10.2.39.5.1.4.2	CodecType	read-write	The default priority of the first level CODEC(coding and decoding).
COD h3cVoPeerDefault2ndCodecLevel	1.3.6.1.4.1.43.45.1.10.2.39.5.1.4.3	CodecType	read-write	The default priority of the second level CODEC(coding and decoding).
COD h3cVoPeerDefault3rdCodecLevel	1.3.6.1.4.1.43.45.1.10.2.39.5.1.4.4	CodecType	read-write	The default priority of the third level CODEC(coding and decoding).
COD h3cVoPeerDefault4thCodecLevel	1.3.6.1.4.1.43.45.1.10.2.39.5.1.4.5	CodecType	read-write	The default priority of the fourth level CODEC(coding and decoding).
h3cVoPeerDefaultConfigObjects	1.3.6.1.4.1.43.45.1.10.2.39.5.1.4
FAX h3cVoPeerDefaultFaxBaudrate	1.3.6.1.4.1.43.45.1.10.2.39.5.1.4.12	FaxBaudrateType	read-write	The default value of dial peer's fax baudrate.
INT h3cVoPeerDefaultFaxECM	1.3.6.1.4.1.43.45.1.10.2.39.5.1.4.16	INTEGER	read-write	The default value of fax ECM(Error Correct Mode) Mode.
I32 h3cVoPeerDefaultFaxHSRedunNum	1.3.6.1.4.1.43.45.1.10.2.39.5.1.4.10	Integer32	read-write	The default value of dial peer's T38 fax protocol high redundancy packet number.
I32 h3cVoPeerDefaultFaxLocalTrain	1.3.6.1.4.1.43.45.1.10.2.39.5.1.4.8	Integer32	read-write	The default value of dial peer's fax local train threshold.
I32 h3cVoPeerDefaultFaxLSRedunNum	1.3.6.1.4.1.43.45.1.10.2.39.5.1.4.11	Integer32	read-write	The default value of dial peer's T38 fax protocol low redundancy packet number.
INT h3cVoPeerDefaultFaxNSF	1.3.6.1.4.1.43.45.1.10.2.39.5.1.4.13	INTEGER	read-write	The default value of fax NSF(non-standard faculty).
FAX h3cVoPeerDefaultFaxProtocol	1.3.6.1.4.1.43.45.1.10.2.39.5.1.4.9	FaxProtocolType	read-write	The default value of dial peer's fax protocol.
FAX h3cVoPeerDefaultFaxSupportMode	1.3.6.1.4.1.43.45.1.10.2.39.5.1.4.14	FaxSupportModeType	read-write	The default mode of fax supported.
FAX h3cVoPeerDefaultFaxTrainMode	1.3.6.1.4.1.43.45.1.10.2.39.5.1.4.15	FaxTrainMode	read-write	The default value of fax training mode.
I32 h3cVoPeerDefaultFaxTransLevel	1.3.6.1.4.1.43.45.1.10.2.39.5.1.4.7	Integer32	read-write	The default value of dial peer's fax transmit level. The unit is db.
INT h3cVoPeerDefaultVADOn	1.3.6.1.4.1.43.45.1.10.2.39.5.1.4.6	INTEGER	read-write	The default value of dial peer's VAD(Voice Activity Detection).
h3cVoPeerObjects	1.3.6.1.4.1.43.45.1.10.2.39.5.1
h3cVoPOTSPeerConfigEntry	1.3.6.1.4.1.43.45.1.10.2.39.5.1.2.1		not-accessible	The entry of h3cVoPOTSPeerConfigTable.
I32 h3cVoPOTSPeerConfigIndex	1.3.6.1.4.1.43.45.1.10.2.39.5.1.2.1.1	Integer32	not-accessible	The index of voice pots peer table.
OCT h3cVoPOTSPeerConfigPrefix	1.3.6.1.4.1.43.45.1.10.2.39.5.1.2.1.2	OCTET STRING	read-write	This object indicates the prefix which is added to the called number.
I32 h3cVoPOTSPeerConfigSendNum	1.3.6.1.4.1.43.45.1.10.2.39.5.1.2.1.4	Integer32	read-write	This object indicates the digit of phone number to be sent to the destination.
OCT h3cVoPOTSPeerConfigSubLine	1.3.6.1.4.1.43.45.1.10.2.39.5.1.2.1.3	OCTET STRING	read-write	This object indicates the voice subscriber line of this dial peer.
h3cVoPOTSPeerConfigTable	1.3.6.1.4.1.43.45.1.10.2.39.5.1.2		not-accessible	This table contains the POTS(Public Switched Telephone Network) peer information.
OCT h3cVoVoIPPeerCfgAreaID	1.3.6.1.4.1.43.45.1.10.2.39.5.1.3.1.7	OCTET STRING	read-write	This object specifies service area-id.
INT h3cVoVoIPPeerCfgFastStart	1.3.6.1.4.1.43.45.1.10.2.39.5.1.3.1.5	INTEGER	read-write	This object indicates whether the fast connection function is enabled.
I32 h3cVoVoIPPeerCfgIndex	1.3.6.1.4.1.43.45.1.10.2.39.5.1.3.1.1	Integer32	not-accessible	The index of voice voip peer table.
INT h3cVoVoIPPeerCfgSendRing	1.3.6.1.4.1.43.45.1.10.2.39.5.1.3.1.8	INTEGER	read-write	This object indicates whether sending ring is enabled.
IP h3cVoVoIPPeerCfgTargetAddr	1.3.6.1.4.1.43.45.1.10.2.39.5.1.3.1.4	InetAddress	read-write	This object indicates the target ip address. This object is valid when h3cVoVoIPPeerCfgTargetType is h323Ipv4 or sipIpv4.
IPt h3cVoVoIPPeerCfgTargetAddrType	1.3.6.1.4.1.43.45.1.10.2.39.5.1.3.1.3	InetAddressType	read-write	The IP address type of object h3cVoVoIPPeerCfgTargetAddr.
INT h3cVoVoIPPeerCfgTargetType	1.3.6.1.4.1.43.45.1.10.2.39.5.1.3.1.2	INTEGER	read-write	This object indicates the type of the session target of this peer.
INT h3cVoVoIPPeerCfgTunnel	1.3.6.1.4.1.43.45.1.10.2.39.5.1.3.1.6	INTEGER	read-write	This object indicates whether the tunnel function is enabled.
h3cVoVoIPPeerConfigEntry	1.3.6.1.4.1.43.45.1.10.2.39.5.1.3.1		not-accessible	The entry of h3cVoVoIPPeerConfigTable.
h3cVoVoIPPeerConfigTable	1.3.6.1.4.1.43.45.1.10.2.39.5.1.3		not-accessible	This table contains the voip peer information.

RFC description

VoIP dial control configuration including codec types, fax protocols, and peer management.

Start monitoring H3C/3Com voice gateways with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download A3COM-HUAWEI-VODIALCONTROL-MIB

What Is A3COM-HUAWEI-VODIALCONTROL-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description