CTRON-SFPS-VLAN-MIB

All MIBs › CTRON-SFPS-VLAN-MIB

Category: VLAN and Bridging, Vendor: Cabletron/Enterasys

Description: Manages Cabletron SFPS VLAN assignments, VLAN membership, and inter-VLAN routing within SecureFast networks.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is CTRON-SFPS-VLAN-MIB?

CTRON-SFPS-VLAN-MIB is a Cabletron Systems enterprise MIB for the SecureFast Packet Switching (SFPS) API, defining VLAN configuration and control objects for Cabletron's SecureFast virtual-LAN switching architecture. The sfpsVAPIVerb-driven vlanAPI group provides a verb-based command interface (add-vlan, delete-vlan, enable/disable-vlan, map/unmap-port, map/unmap-user, tap/untap-vlan, auto-register/unregister) for programmatically manipulating VLAN and port mappings, while vlanNameTable reports each configured VLAN's admin/operational status, unicast policy (open/secure), flood policy, enabled and mapped port lists, and relay-agent IP. The vlanSystemTable tracks per-switch-instance VLAN engine health (admin/operational status, reset control, uptime, last-change timestamp, firmware/MIB revision, and SNMP poll timing), and vlanPortTable/vlanAMRRulesTable expose per-port VLAN policy plus Automatic Membership/Registration (AMR) rules that auto-classify traffic by Ethernet type, IP subnet, NetBIOS, IPX server, AppleTalk, DECnet, VINES, or BPDU. It depends on the companion CTRON-SFPS-INCLUDE-MIB for its base object subtrees (vlanAPI, vlanName, vlanSystem, and related groups) and is deployed on Cabletron SecureFast VLAN-capable switches, and administrators can download the CTRON-SFPS-VLAN-MIB file to manage or monitor SecureFast VLAN configuration.

IPNetwork Monitor allows you to monitor SNMP objects defined in CTRON-SFPS-VLAN-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Cabletron Systems SecureFast (SFPS) VLAN-capable switches

Monitoring Examples

An operator polls vlanNameOperStatus and vlanNameEnabledPorts/vlanNameMappedPorts for each VLAN to confirm expected ports remain mapped, and checks vlanSystemOperStatus for the switch instance itself; a VLAN stuck in invalid-config(6) or a switch instance reporting pending-disable(4) would indicate a configuration error or an in-progress shutdown affecting that VLAN's traffic.

What Can Be Monitored

VLAN admin/operational status
enabled and mapped port lists per VLAN
unicast and flood policy per VLAN
VLAN switch-instance engine health and uptime
AMR auto-registration rule status

Imported Objects

From CTRON-SFPS-INCLUDE-MIB

vlanAMRRules	OBJECT-IDENTITY
vlanAMRStats	OBJECT-IDENTITY
vlanAMRSubnets	OBJECT-IDENTITY
vlanAPI	OBJECT-IDENTITY
vlanCountAPI	OBJECT-IDENTITY
vlanName	OBJECT-IDENTITY
vlanPort	OBJECT-IDENTITY
vlanSystem	OBJECT-IDENTITY
vlanTestAPI	OBJECT-IDENTITY

From RFC-1212

OBJECT-TYPE

From RFC1155-SMI

IpAddress
TimeTicks

From RFC1213-MIB

DisplayString

OIDs

OID symbolic	OID numeric	Type	Access	Description
INT sfpsVAPIAdminStatus	1.3.6.1.4.1.52.4.2.12.1.1.8	INTEGER	read-write	Sets the administrative state of the object.
INT sfpsVAPIAutoRegisterRule	1.3.6.1.4.1.52.4.2.12.1.1.9	INTEGER	read-write	Specifies the AMR rule in which to perform the action on.
IP sfpsVAPIAutoRegMask	1.3.6.1.4.1.52.4.2.12.1.1.10	IpAddress	read-write	Indicates the mask to apply when the IP-Subnet rule is invoked.
IP sfpsVAPIAutoRegValue	1.3.6.1.4.1.52.4.2.12.1.1.11	IpAddress	read-write	Indicates the Alias Value of the user.
INT sfpsVAPIFloodPolicy	1.3.6.1.4.1.52.4.2.12.1.1.14	INTEGER	read-write	Sets the flood mode type.
SFP sfpsVAPIInPort	1.3.6.1.4.1.52.4.2.12.1.1.2	SfpsSwitchPort	read-write	Specifies the ingress port of the Virtual LAN if mapping a connection. Specifies the source port of a user when mapping a user
INT sfpsVAPILayer3Learning	1.3.6.1.4.1.52.4.2.12.1.1.19	INTEGER	read-write	Indicates layer 3 learning enabled/disabled
INT sfpsVAPINvramId	1.3.6.1.4.1.52.4.2.12.1.1.17	INTEGER	read-write	Indicates the Nvram Id
SFP sfpsVAPIOutPort	1.3.6.1.4.1.52.4.2.12.1.1.4	SfpsSwitchPort	read-write	Specifies the egress port of the Virtual LAN if mapping a connection.
INT sfpsVAPIPortPolicy	1.3.6.1.4.1.52.4.2.12.1.1.13	INTEGER	read-write	Sets the port mode type.
IP sfpsVAPIRelayAgent	1.3.6.1.4.1.52.4.2.12.1.1.18	IpAddress	read-write	Indicates the Relay Agent.
INT sfpsVAPIRouterPort	1.3.6.1.4.1.52.4.2.12.1.1.15	INTEGER	read-write	Sets router port
INT sfpsVAPIUnicastPolicy	1.3.6.1.4.1.52.4.2.12.1.1.12	INTEGER	read-write	Sets the vlan policy type.
STR sfpsVAPIUserAlias	1.3.6.1.4.1.52.4.2.12.1.1.7	DisplayString	read-write	Indicates the Alias Value of the user.
INT sfpsVAPIUserAliasTag	1.3.6.1.4.1.52.4.2.12.1.1.6	INTEGER	read-write	Indicates the Alias Value of the user. Not yet supported.
ADR sfpsVAPIUserMAC	1.3.6.1.4.1.52.4.2.12.1.1.5	SfpsAddress	read-write	Specifies the actual user's MAC value for the action.
INT sfpsVAPIVerb	1.3.6.1.4.1.52.4.2.12.1.1.1	INTEGER	read-write	Specifies the action to be initiated as a result of setting this leaf.
INT sfpsVAPIVlanId	1.3.6.1.4.1.52.4.2.12.1.1.16	INTEGER	read-write	Indicates the Vlan Id.
STR sfpsVAPIVlanName	1.3.6.1.4.1.52.4.2.12.1.1.3	DisplayString	read-write	Specifies the Virtual LAN ID.
vlanAMRRulesEntry	1.3.6.1.4.1.52.4.2.12.3.6.1.1		not-accessible
INT vlanAMRRulesRule	1.3.6.1.4.1.52.4.2.12.3.6.1.1.1	INTEGER	read-only	Refers to the enumerated value corresponding to each AMR rule
INT vlanAMRRulesStatus	1.3.6.1.4.1.52.4.2.12.3.6.1.1.2	INTEGER	read-only	Displays whether the rule is currently on or off
vlanAMRRulesTable	1.3.6.1.4.1.52.4.2.12.3.6.1		not-accessible	This table displays the on/off status of each individual AMR Rule.
INT vlanAMRStatsNumRulesEnabled	1.3.6.1.4.1.52.4.2.12.3.8.1	INTEGER	read-only	Refers to the number of rules that are on in the AmrRules
IP vlanAMRStatsSingleMask	1.3.6.1.4.1.52.4.2.12.3.8.2	IpAddress	read-only	Displays the mask that is used with the IP-Subnet AMR rule
IP vlanAMRSubnetsMask	1.3.6.1.4.1.52.4.2.12.3.7.2	IpAddress	read-only
IP vlanAMRSubnetsPrefix	1.3.6.1.4.1.52.4.2.12.3.7.1	IpAddress	read-only
INT vlanCountAPIAdmin	1.3.6.1.4.1.52.4.2.12.1.2.10.1.2	INTEGER	read-only
INT vlanCountAPIAutoreg	1.3.6.1.4.1.52.4.2.12.1.2.10.1.3	INTEGER	read-only
INT vlanCountAPITotal	1.3.6.1.4.1.52.4.2.12.1.2.10.1.1	INTEGER	read-only
INT vlanNameAdminStatus	1.3.6.1.4.1.52.4.2.12.1.2.1.1.1.4	INTEGER	read-only	The administrative state of the Vlan.
STR vlanNameEnabledPorts	1.3.6.1.4.1.52.4.2.12.1.2.1.1.1.10	DisplayString	read-only	The list of ports which have are enabled for this Vlan.
vlanNameEntry	1.3.6.1.4.1.52.4.2.12.1.2.1.1.1		not-accessible	Each entry specifies the configuration for the Vlan instance.
INT vlanNameFloodPolicy	1.3.6.1.4.1.52.4.2.12.1.2.1.1.1.7	INTEGER	read-only	The multicast and unknown destination flood policy.
STR vlanNameFloodPorts	1.3.6.1.4.1.52.4.2.12.1.2.1.1.1.13	DisplayString	read-only
INT vlanNameIndex	1.3.6.1.4.1.52.4.2.12.1.2.1.1.1.2	INTEGER	read-only	The secondary index to the VlanName table.
STR vlanNameMappedPorts	1.3.6.1.4.1.52.4.2.12.1.2.1.1.1.11	DisplayString	read-only	The list of ports which have this Vlan mapped to it.
NUM vlanNameNHash	1.3.6.1.4.1.52.4.2.12.1.2.1.1.1.1	HexInteger	read-only	The primary index to the VlanName table.
STR vlanNameNumUsers	1.3.6.1.4.1.52.4.2.12.1.2.1.1.1.9	DisplayString	read-only	The number of users per port
INT vlanNameOperStatus	1.3.6.1.4.1.52.4.2.12.1.2.1.1.1.5	INTEGER	read-only	The operational state of the Vlan.
IP vlanNameRelayAgent	1.3.6.1.4.1.52.4.2.12.1.2.1.1.1.15	IpAddress	read-only
TIK vlanNameStatusTime	1.3.6.1.4.1.52.4.2.12.1.2.1.1.1.8	TimeTicks	read-only	The amount of time that this Vlan has been in its current operational state.
vlanNameTable	1.3.6.1.4.1.52.4.2.12.1.2.1.1		not-accessible	This table contains information of each SFVlan instance. Essentially, a separate SFVlan instance exists for each Vlan. If SFVlan is not configured on a module, than an entry will not exist.
INT vlanNameUniPolicy	1.3.6.1.4.1.52.4.2.12.1.2.1.1.1.6	INTEGER	read-only	The communication policy with respect to other Vlans.
INT vlanNameVlanId	1.3.6.1.4.1.52.4.2.12.1.2.1.1.1.14	INTEGER	read-only
STR vlanNameVlanName	1.3.6.1.4.1.52.4.2.12.1.2.1.1.1.3	DisplayString	read-only	The Virual LAN ID.
INT vlanNameVlanRule	1.3.6.1.4.1.52.4.2.12.1.2.1.1.1.12	INTEGER	read-only	.
INT vlanPortAdminStatus	1.3.6.1.4.1.52.4.2.12.1.2.6.1.1.5	INTEGER	read-only
vlanPortEntry	1.3.6.1.4.1.52.4.2.12.1.2.6.1.1		not-accessible
INT vlanPortFloodPolicy	1.3.6.1.4.1.52.4.2.12.1.2.6.1.1.7	INTEGER	read-only
INT vlanPortLayer3Learning	1.3.6.1.4.1.52.4.2.12.1.2.6.1.1.11	INTEGER	read-only
INT vlanPortPortNum	1.3.6.1.4.1.52.4.2.12.1.2.6.1.1.1	INTEGER	read-only	The primary index to the VlanPort table.
INT vlanPortPortPolicy	1.3.6.1.4.1.52.4.2.12.1.2.6.1.1.3	INTEGER	read-only
INT vlanPortPortStatus	1.3.6.1.4.1.52.4.2.12.1.2.6.1.1.2	INTEGER	read-only
IP vlanPortRelayAgent	1.3.6.1.4.1.52.4.2.12.1.2.6.1.1.10	IpAddress	read-only
INT vlanPortRouterPort	1.3.6.1.4.1.52.4.2.12.1.2.6.1.1.8	INTEGER	read-only
vlanPortTable	1.3.6.1.4.1.52.4.2.12.1.2.6.1		not-accessible
INT vlanPortUniPolicy	1.3.6.1.4.1.52.4.2.12.1.2.6.1.1.6	INTEGER	read-only
INT vlanPortVlanId	1.3.6.1.4.1.52.4.2.12.1.2.6.1.1.9	INTEGER	read-only
STR vlanPortVlanName	1.3.6.1.4.1.52.4.2.12.1.2.6.1.1.4	DisplayString	read-only
INT vlanSystemAdminReset	1.3.6.1.4.1.52.4.2.12.1.2.5.1.1.3	INTEGER	read-write	Resets this VLAN switch instance. Writing a vlue of reset(2) will force a soft restart of the VLAN without any graceful shutdown. Any active connections or services will be interrupted.
INT vlanSystemAdminStatus	1.3.6.1.4.1.52.4.2.12.1.2.5.1.1.2	INTEGER	read-write	Sets the administrative state of the VLAN switching services for this VLAN instance. This controls the VLAN state at a module level. Regardless of the per-port state of each VLAN switching port and the state of active connections, writing the value disabled(2) will cause the VLAN to immediately shutdown. A gracefull shutdown will be attempted.
IP vlanSystemAgentIP	1.3.6.1.4.1.52.4.2.12.1.2.5.1.1.9	IpAddress	read-write	IP Address of VLAN Manager who owns this switch.
TIK vlanSystemDeltaPollTime	1.3.6.1.4.1.52.4.2.12.1.2.5.1.1.15	TimeTicks	read-only	Time difference between last poll time and prior poll time
STR vlanSystemDomainName	1.3.6.1.4.1.52.4.2.12.1.2.5.1.1.10	DisplayString	read-write	Indicates domain name
vlanSystemEntry	1.3.6.1.4.1.52.4.2.12.1.2.5.1.1		not-accessible	Each entry specifies the VLAN configuration for the VLAN instance.
TIK vlanSystemFirstPollTime	1.3.6.1.4.1.52.4.2.12.1.2.5.1.1.12	TimeTicks	read-only	System time when first polled
TIK vlanSystemLastChange	1.3.6.1.4.1.52.4.2.12.1.2.5.1.1.6	TimeTicks	read-only	Indicates the last time a change was made to the configuration entry for this VLAN switch instance.
TIK vlanSystemLastPollTime	1.3.6.1.4.1.52.4.2.12.1.2.5.1.1.13	TimeTicks	read-only	Last time polled
STR vlanSystemMibRev	1.3.6.1.4.1.52.4.2.12.1.2.5.1.1.8	DisplayString	read-only	Indicates in textual format the current revision level of the Cabletron VLAN MIB implemeted by the agent for this VLAN switch instance.
INT vlanSystemOperStatus	1.3.6.1.4.1.52.4.2.12.1.2.5.1.1.4	INTEGER	read-only	Indicates the current operating condition of the VLAN instance.
TIK vlanSystemOperTime	1.3.6.1.4.1.52.4.2.12.1.2.5.1.1.5	TimeTicks	read-only	Indicates the amount of time (# of time ticks) that this VLAN switch instance has been in its current operational state.
INT vlanSystemPollCount	1.3.6.1.4.1.52.4.2.12.1.2.5.1.1.11	INTEGER	read-only	Number of polls
TIK vlanSystemPriorPollTime	1.3.6.1.4.1.52.4.2.12.1.2.5.1.1.14	TimeTicks	read-only	Poll time one before the last poll time
VLA vlanSystemSwitchInstance	1.3.6.1.4.1.52.4.2.12.1.2.5.1.1.1	VlanSwitchInstance	read-only	The primary index to the VLAN switch table. This identifies the VLAN switch for which the entry exists.
vlanSystemTable	1.3.6.1.4.1.52.4.2.12.1.2.5.1		not-accessible	This table contains the configuration and administrative information of each SFVlan switch instance. Essentially, a separate SFVlan switch instance exists for each switch module. If SFVlan is not configured on a module, than an entry will not exist.
STR vlanSystemVersion	1.3.6.1.4.1.52.4.2.12.1.2.5.1.1.7	DisplayString	read-only	Indicates the current revision level of the VLAN firmware for this VLAN switch instance.
INT vlanTestAPIOutputAble	1.3.6.1.4.1.52.4.2.12.1.2.9.4.1.8	INTEGER	read-only	Specifies whether the Vlan is enabled.
vlanTestAPIOutputEntry	1.3.6.1.4.1.52.4.2.12.1.2.9.4.1		not-accessible	Each entry specifies one output result of the VlanAPI action.
INT vlanTestAPIOutputIndex	1.3.6.1.4.1.52.4.2.12.1.2.9.4.1.1	INTEGER	read-only	The primary index to the VLAN Test API Output table.
INT vlanTestAPIOutputMap	1.3.6.1.4.1.52.4.2.12.1.2.9.4.1.7	INTEGER	read-only	Specifies whether the Vlan is mapped.
INT vlanTestAPIOutputPolicy	1.3.6.1.4.1.52.4.2.12.1.2.9.4.1.5	INTEGER	read-only	Specifies the uni-cast policy of this Vlan.
INT vlanTestAPIOutputPort	1.3.6.1.4.1.52.4.2.12.1.2.9.4.1.6	INTEGER	read-only	Specifies the Vlan port.
INT vlanTestAPIOutputStatus	1.3.6.1.4.1.52.4.2.12.1.2.9.4.1.4	INTEGER	read-only	Specifies the operational state of this Vlan.
vlanTestAPIOutputTable	1.3.6.1.4.1.52.4.2.12.1.2.9.4		not-accessible	This table contains the output results of the VlanAPI action.
INT vlanTestAPIOutputTap	1.3.6.1.4.1.52.4.2.12.1.2.9.4.1.9	INTEGER	read-only	Specifies whether the Vlan is tapped.
INT vlanTestAPIOutputUserCnt	1.3.6.1.4.1.52.4.2.12.1.2.9.4.1.3	INTEGER	read-only	Specifies the number of users on this Vlan.
INT vlanTestAPIOutputVlanId	1.3.6.1.4.1.52.4.2.12.1.2.9.4.1.10	INTEGER	read-only	Specifies the Vlan Id.
STR vlanTestAPIOutputVlanName	1.3.6.1.4.1.52.4.2.12.1.2.9.4.1.2	DisplayString	read-only	Specifies the Virtual LAN by name.
INT vlanTestAPIPort	1.3.6.1.4.1.52.4.2.12.1.2.9.3	INTEGER	read-write	Specifies the Port to be acted upon.
INT vlanTestAPIVerb	1.3.6.1.4.1.52.4.2.12.1.2.9.1	INTEGER	read-write	Specifies the action to be initiated as a result of setting this leaf.
INT vlanTestAPIVlanId	1.3.6.1.4.1.52.4.2.12.1.2.9.5	INTEGER	read-write	Specifies the ID.
STR vlanTestAPIVlanName	1.3.6.1.4.1.52.4.2.12.1.2.9.2	DisplayString	read-write	Specifies the Virtual LAN to be acted upon.

RFC description

Fast Packet Switching Services VLAN API for Cabletron switches, providing VLAN engine and switch mapping interfaces.

Start monitoring Cabletron SecureFast Packet Switch (SFPS), VLAN configuration with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download CTRON-SFPS-VLAN-MIB

What Is CTRON-SFPS-VLAN-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description