CTRON-SFPS-COMMON-MIB

All MIBs › CTRON-SFPS-COMMON-MIB

Category: Vendor: Cabletron/Enterasys

Description: Provides common Cabletron SFPS objects shared across multiple SecureFast Packet Switch MIB modules.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is CTRON-SFPS-COMMON-MIB?

CTRON-SFPS-COMMON-MIB is a Cabletron Systems enterprise MIB defining objects shared across multiple SecureFast Packet Switch (SFPS) MIB modules, including generic version/revision tracking and diagnostic logging configuration common to the SFPS product family. It exposes version identification data (per-component version hash, name, and MIB revision) and diagnostic log configuration/status objects used across SFPS switches. For monitoring purposes this module supports confirming installed software/firmware component versions across an SFPS switch and checking whether diagnostic logging is enabled and correctly configured for troubleshooting, directly touching on software version status rather than physical hardware metrics like temperature or power. It serves as a shared/common dependency imported by other SFPS-specific MIBs (such as CTRON-SFPS-POLICY-MIB and CTRON-SFPS-TOPOLOGY-MIB) rather than standing alone. It is deployed on Cabletron SecureFast Packet Switches, an ATM/frame-based switching product line from the mid-to-late 1990s, and network engineers documenting these legacy switches can still find a CTRON-SFPS-COMMON-MIB download to load directly into a MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in CTRON-SFPS-COMMON-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Cabletron SecureFast Packet Switch (SFPS)

Monitoring Examples

An administrator would poll sfpsGenericVersionTable/sfpsGenericVersionEntry to check sfpsGenericVersionName, sfpsGenericVersionVersion, and sfpsGenericVersionMIBRev for a given sfpsGenericVersionHash, confirming which firmware/software component versions are running on an SFPS switch during an upgrade audit. Separately, sfpsDiagLogConfigTable/sfpsDiagLogConfigEntry would be checked via sfpsDiagLogConfigStatus for a given sfpsDiagLogConfigInstance/sfpsDiagLogConfigIndex to confirm diagnostic logging is active before troubleshooting an intermittent fault. A mismatched sfpsGenericVersionVersion across switches in a fabric would flag an inconsistent software rollout.

What Can Be Monitored

per-component software/firmware version
MIB revision per component
diagnostic log configuration status
diagnostic log instance state

Imported Objects

From CTRON-SFPS-INCLUDE-MIB

sfpsAOProperties	OBJECT-IDENTITY
sfpsAOPropertiesAPI	OBJECT-IDENTITY
sfpsDiagEventLog	OBJECT-IDENTITY
sfpsSystemGenerics	OBJECT-IDENTITY

From RFC-1212

OBJECT-TYPE

From RFC1213-MIB

DisplayString

OIDs

OID symbolic	OID numeric	Type	Access	Description
sfpsGenericVersionTable	1.3.6.1.4.1.52.4.2.4.2.1.1.3.1		not-accessible	Table describing the SFS generics and their versions that are contained within this image.
sfpsGenericVersionEntry	1.3.6.1.4.1.52.4.2.4.2.1.1.3.1.1		not-accessible	An entry in the table instanced by the Generic name.
INT sfpsGenericVersionHash	1.3.6.1.4.1.52.4.2.4.2.1.1.3.1.1.1	INTEGER	read-only	Hash of the name to make it a unique entry.
STR sfpsGenericVersionName	1.3.6.1.4.1.52.4.2.4.2.1.1.3.1.1.2	DisplayString	read-only	Name of the Generic.
STR sfpsGenericVersionVersion	1.3.6.1.4.1.52.4.2.4.2.1.1.3.1.1.3	DisplayString	read-only	Version stamp of the generic component.
STR sfpsGenericVersionMIBRev	1.3.6.1.4.1.52.4.2.4.2.1.1.3.1.1.4	DisplayString	read-only	MIB version of the generic component.
sfpsAOPropertiesTable	1.3.6.1.4.1.52.4.2.4.2.1.1.5.1		not-accessible
sfpsAOPropertiesEntry	1.3.6.1.4.1.52.4.2.4.2.1.1.5.1.1		not-accessible	An entry in the table instanced by the tag.
INT sfpsAOPropertiesTag	1.3.6.1.4.1.52.4.2.4.2.1.1.5.1.1.1	INTEGER	read-only
OCT sfpsAOPropertiesTagDescriptor	1.3.6.1.4.1.52.4.2.4.2.1.1.5.1.1.2	OCTET STRING	read-only
OCT sfpsAOPropertiesPrettyType	1.3.6.1.4.1.52.4.2.4.2.1.1.5.1.1.3	OCTET STRING	read-only
INT sfpsAOPropertiesNumBytes	1.3.6.1.4.1.52.4.2.4.2.1.1.5.1.1.4	INTEGER	read-only
INT sfpsAOPropertiesIsLimit	1.3.6.1.4.1.52.4.2.4.2.1.1.5.1.1.5	INTEGER	read-only
INT sfpsAOPropertiesIsMobile	1.3.6.1.4.1.52.4.2.4.2.1.1.5.1.1.6	INTEGER	read-only
INT sfpsAOPropertiesIsSingle	1.3.6.1.4.1.52.4.2.4.2.1.1.5.1.1.7	INTEGER	read-only
INT sfpsAOPropertiesNoBlock	1.3.6.1.4.1.52.4.2.4.2.1.1.5.1.1.8	INTEGER	read-only
INT sfpsAOPropertiesNoDelta	1.3.6.1.4.1.52.4.2.4.2.1.1.5.1.1.9	INTEGER	read-only
INT sfpsAOPropertiesAPITag	1.3.6.1.4.1.52.4.2.4.2.1.1.5.2.1	INTEGER	read-write
INT sfpsAOPropertiesAPITagString	1.3.6.1.4.1.52.4.2.4.2.1.1.5.2.2	INTEGER	read-only
INT sfpsAOPropertiesAPIPrettyType	1.3.6.1.4.1.52.4.2.4.2.1.1.5.2.3	INTEGER	read-only
INT sfpsAOPropertiesAPINumBytes	1.3.6.1.4.1.52.4.2.4.2.1.1.5.2.4	INTEGER	read-only
INT sfpsAOPropertiesAPIIsLimit	1.3.6.1.4.1.52.4.2.4.2.1.1.5.2.5	INTEGER	read-write
INT sfpsAOPropertiesAPIIsMobile	1.3.6.1.4.1.52.4.2.4.2.1.1.5.2.6	INTEGER	read-write
INT sfpsAOPropertiesAPIIsSingle	1.3.6.1.4.1.52.4.2.4.2.1.1.5.2.7	INTEGER	read-write
INT sfpsAOPropertiesAPINoBlock	1.3.6.1.4.1.52.4.2.4.2.1.1.5.2.8	INTEGER	read-write
INT sfpsAOPropertiesAPINoDelta	1.3.6.1.4.1.52.4.2.4.2.1.1.5.2.9	INTEGER	read-write
INT sfpsAOPropertiesAPIAction	1.3.6.1.4.1.52.4.2.4.2.1.1.5.2.10	INTEGER	read-write
sfpsDiagLogConfigTable	1.3.6.1.4.1.52.4.2.4.2.2.6.1.1		not-accessible	This table contains the informtion to configure an Event Logger object.
sfpsDiagLogConfigEntry	1.3.6.1.4.1.52.4.2.4.2.2.6.1.1.1		not-accessible	Each entry contains configuration data.
INT sfpsDiagLogConfigInstance	1.3.6.1.4.1.52.4.2.4.2.2.6.1.1.1.1	INTEGER	read-only	The instance of this Event Logger.
INT sfpsDiagLogConfigStatus	1.3.6.1.4.1.52.4.2.4.2.2.6.1.1.1.2	INTEGER	read-write	The status of this Event Logger object.
INT sfpsDiagLogConfigIndex	1.3.6.1.4.1.52.4.2.4.2.2.6.1.1.1.3	INTEGER	read-only	The current index in the circular buffer where events are being logged.
INT sfpsDiagLogConfigStart	1.3.6.1.4.1.52.4.2.4.2.2.6.1.1.1.4	INTEGER	read-write	The starting index in the circular buffer to display.
INT sfpsDiagLogConfigStop	1.3.6.1.4.1.52.4.2.4.2.2.6.1.1.1.5	INTEGER	read-write	The last index in the circular buffer to display.
INT sfpsDiagLogConfigLogIndex	1.3.6.1.4.1.52.4.2.4.2.2.6.1.1.1.6	INTEGER	read-write	The current index in the log buffer where we are looking.
INT sfpsDiagLogConfigFilterMatch	1.3.6.1.4.1.52.4.2.4.2.2.6.1.1.1.7	INTEGER	read-write	The specified Event Id to log. A value of 0 will cause every event to be logged.
INT sfpsDiagLogConfigFilterStart	1.3.6.1.4.1.52.4.2.4.2.2.6.1.1.1.8	INTEGER	read-write	The beginning range of Event Ids to log.
INT sfpsDiagLogConfigFilterStop	1.3.6.1.4.1.52.4.2.4.2.2.6.1.1.1.9	INTEGER	read-write	The ending range of Event Ids to log.
NUM sfpsDiagLogAccessPortControl	1.3.6.1.4.1.52.4.2.4.2.2.6.1.1.1.10	HexInteger	read-write	Leaf to be used to set a port bit mask. This bit mask represents which ports shall be statically set to be an ACCESS port. Bit 0 corresponds to Port 1.
INT sfpsDiagLogCallIdleTime	1.3.6.1.4.1.52.4.2.4.2.2.6.1.1.1.11	INTEGER	read-write	Leaf to be used to set a debug variable. (in seconds)
INT sfpsDiagLogFilterAddTimer	1.3.6.1.4.1.52.4.2.4.2.2.6.1.1.1.12	INTEGER	read-write	Leaf to be used to set how long a filter connection should be (Default : 900 seconds)
INT sfpsDiagLogRedirectorWakeup	1.3.6.1.4.1.52.4.2.4.2.2.6.1.1.1.13	INTEGER	read-write	Leaf to be used to set how often the Redirector wakes up to service the queue (in seconds)
INT sfpsDiagLogRedirectorNumPackets	1.3.6.1.4.1.52.4.2.4.2.2.6.1.1.1.14	INTEGER	read-write	Leaf to be used to set how many packets the Redirector reads off at a time.
INT sfpsDiagLogEndSystemTimeout	1.3.6.1.4.1.52.4.2.4.2.2.6.1.1.1.15	INTEGER	read-write	Leaf to be used to set a debug variable. (Default : 10 minutes) (in seconds)
INT sfpsDiagLogSwitchIdleInterval	1.3.6.1.4.1.52.4.2.4.2.2.6.1.1.1.16	INTEGER	read-write	Leaf to be used to set a debug variable. (in seconds)
INT sfpsDiagLogInlnFltrAgeTime	1.3.6.1.4.1.52.4.2.4.2.2.6.1.1.1.17	INTEGER	read-write	Leaf to be used to set the BAF age time (seconds).
INT sfpsDiagLogConfigDebug9	1.3.6.1.4.1.52.4.2.4.2.2.6.1.1.1.18	INTEGER	read-write	Leaf to be used to set a debug variable.
INT sfpsDiagLogSignalThrottle	1.3.6.1.4.1.52.4.2.4.2.2.6.1.1.1.19	INTEGER	read-write	Leaf to be used to set the Signal Thottle knob. Throttling defaults to off. By setting it to 1,2,5, or 10 one can dictate the rate (signal/second) at which SFPS sends signals to the ACMS Signal Stack..
INT sfpsDiagLogConfigOther	1.3.6.1.4.1.52.4.2.4.2.2.6.1.1.1.20	INTEGER	read-write	Dictates the format of the Event to be displayed (either Text or Integer values).
INT sfpsDiagLogConfigSoftReset	1.3.6.1.4.1.52.4.2.4.2.2.6.1.1.1.21	INTEGER	read-write
INT sfpsDiagLogConfigSFPSVlan	1.3.6.1.4.1.52.4.2.4.2.2.6.1.1.1.22	INTEGER	read-write

RFC description

Cabletron Fast Packet Switching Services switch generics and version management.

Start monitoring Cabletron SecureFast Packet Switch (SFPS), shared definitions with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download CTRON-SFPS-COMMON-MIB

What Is CTRON-SFPS-COMMON-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description