CTMMIB

All MIBs › CTMMIB

Category: Quality of Service, Vendor: Cabletron/Enterasys

Description: Supplies Cabletron's multimedia MIB objects for managing multimedia traffic and configuring QoS parameters.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is CTMMIB?

CTMMIB is the Last Mile Gear CTM Master MIB (registered under enterprises.25868), a private MIB for managing a fixed-wireless/PoE 'master' distribution unit that combines GPS-disciplined timing, dual-input power monitoring, and per-port power delivery across up to eight ports. It exposes GPS/site identity objects (site, nSats for satellites in view, lastIP/lastTime for the last management login), primary and secondary power-supply status (pwrP, pwrS) with input voltages (voltsM1, voltsM2) and a circuit-breaker trip bitmask (cbTrip encoding which of up to eight ports has tripped), and per-port delivered power (portPwrM1 through portPwrM8, in tenths of a watt) alongside per-port sync/on-enable status bitmasks (portOnM, portSyncM). Auto-restart counters (trpCntGM1-8) and restart-failure counters (trpCntBM1-8) track how often the circuit-breaker auto-reset feature has fired and failed per port, and modeReqM records each port's configured type (Canopy, OFDM, or various PoE 802.3at modes). Because it centers on power delivery and circuit-breaker health for downstream radios/PoE devices rather than IP traffic, it is deployed on Last Mile Gear CTM master power/sync distribution units in fixed-wireless backhaul deployments for CTMMIB MIB based power and breaker-trip monitoring.

IPNetwork Monitor allows you to monitor SNMP objects defined in CTMMIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Last Mile Gear CTM master power/sync distribution units

Monitoring Examples

An operator polls cbTrip and trpCntBM1 through trpCntBM8 to check which ports have tripped their circuit breaker and how many auto-restart attempts have failed, cross-referencing portPwrM1-8 for abnormal per-port power draw; a non-zero cbTrip bit combined with a high trpCntBM value for that port would indicate a persistent short or overload the auto-reset feature could not clear.

What Can Be Monitored

primary/secondary power supply status and input voltage
GPS satellites-in-view count
per-port circuit-breaker trip bitmask
per-port delivered power
per-port auto-restart success/failure counters
per-port configured mode (Canopy/OFDM/PoE)

Imported Objects

From RFC-1212

OBJECT-TYPE

From RFC-1215

TRAP-TYPE

From RFC1155-SMI

enterprises

OIDs

OID symbolic	OID numeric	Type	Access	Description
lastmilegear	1.3.6.1.4.1.25868
mibObjects	1.3.6.1.4.1.25868.1
NTF lostEthernetConnection	1.3.6.1.4.1.25868.1.0.0			Lost Ethernet Connection
NTF masterPrimayPowerLost	1.3.6.1.4.1.25868.1.0.1			Master Primary Power Lost
NTF masterSecondaryPowerLost	1.3.6.1.4.1.25868.1.0.2			Master Secondary Power Lost
NTF gpsSignalLost	1.3.6.1.4.1.25868.1.0.3			GPS Signal Lost
NTF masterTempatureError	1.3.6.1.4.1.25868.1.0.4			Master Temperature Error
NTF masterCircuitBreakerTripCode	1.3.6.1.4.1.25868.1.0.5			Master Circuit Breaker Trip Code - Master Breaker Tripped Code: 1=Port 1, 2=Port2, 4=Port 3, 8=Port4, 16=Port5, 32=Port6, 64=Port7, 128=Port8 Example: Code 5 means Port 3 and Port 1 Tripped
NTF loginFailedAttempt	1.3.6.1.4.1.25868.1.0.6			Login Failed Attempt
NTF settingsChanged	1.3.6.1.4.1.25868.1.0.7			CTM Settings Changed
NTF masterPrimaryPowerOK	1.3.6.1.4.1.25868.1.0.10			Master Primary Power OK
NTF masterSecondaryPowerOK	1.3.6.1.4.1.25868.1.0.20			Master Secondary Power OK
NTF gpsSignalOK	1.3.6.1.4.1.25868.1.0.30			GPS Signal OK
NTF tempatureOK	1.3.6.1.4.1.25868.1.0.40			Temperature OK
NTF circuitBreakersOK	1.3.6.1.4.1.25868.1.0.50			Circuit Breakers OK
NTF masterAutoRestartCBCompletedOK	1.3.6.1.4.1.25868.1.0.52			Master Auto Restart CB Completed OK
NTF loginOK	1.3.6.1.4.1.25868.1.0.60			Login OK
NTF resetComplete	1.3.6.1.4.1.25868.1.0.80			Reset Complete
NTF ethernetConnectionRestored	1.3.6.1.4.1.25868.1.0.99			Ethernet Connection Restored
OCT version	1.3.6.1.4.1.25868.1.1	OCTET STRING	read-only	Version of Web GUI - Version of Web GUI Interface currently running on CTM
OCT site	1.3.6.1.4.1.25868.1.2	OCTET STRING	read-only	Site Name - Site name as stored on CTM
OCT lastIP	1.3.6.1.4.1.25868.1.3	OCTET STRING	read-only	Last IP Address Login - Last IP address captured at Login Attempt
OCT lastTime	1.3.6.1.4.1.25868.1.4	OCTET STRING	read-only	Last Time Login - Last time of Login attempt
INT nSats	1.3.6.1.4.1.25868.1.5	INTEGER	read-only	Number Satellites in View - Number of Satellites in view of GPS Receiver Antenna being used for timing calculations
INT pwrP	1.3.6.1.4.1.25868.1.6	INTEGER	read-only	Master Primary Power - Master ?1? = Power OK, ?0? = Power Off or Low
INT pwrS	1.3.6.1.4.1.25868.1.7	INTEGER	read-only	Master Secondary Power - Master ?1? = Power OK, ?0? = Power Off or Low
OCT cbTrip	1.3.6.1.4.1.25868.1.8	OCTET STRING	read-only	Master Circuit Breaker Trip Bit Code - Master Breaker Tripped Code: 1=Port 1, 2=Port2, 4=Port 3, 8=Port4, 16=Port5, 32=Port6, 64=Port7, 128=Port8 Example: Code 5 means Port 3 and Port 1 Tripped
INT tempC	1.3.6.1.4.1.25868.1.9	INTEGER	read-only	Master Temperature
INT voltsM1	1.3.6.1.4.1.25868.1.10	INTEGER	read-only	Master Primary Power In Voltage - In Tenths of a Volt
INT voltsM2	1.3.6.1.4.1.25868.1.11	INTEGER	read-only	Master Secondary Power In Voltage - In Tenths of a Volt
OCT portOnM	1.3.6.1.4.1.25868.1.12	OCTET STRING	read-only	Master Ports ON Enabled Status - Master ?1? =Sync Enabled, ?0? = Sync Off listed in order ?Port1?, ?Port2?, ?Port3?, ?Port4?, ?Port5?, ?Port6?, ?Port7?, ?Port8?
OCT portSyncM	1.3.6.1.4.1.25868.1.13	OCTET STRING	read-only	Master Ports Sync Enabled Status - Master ?1? =Sync Enabled, ?0? = Sync Off listed in order ?Port1?, ?Port2?, ?Port3?, ?Port4?, ?Port5?, ?Port6?, ?Port7?, ?Port8?
INT portPwrM1	1.3.6.1.4.1.25868.1.14	INTEGER	read-only	Master Power Port 1 - (in tenths of a Watt) delivered on Port 1
INT portPwrM2	1.3.6.1.4.1.25868.1.15	INTEGER	read-only	Master Power Port 2 - (in tenths of a Watt) delivered on Port 2
INT portPwrM3	1.3.6.1.4.1.25868.1.16	INTEGER	read-only	Master Power Port 3 - (in tenths of a Watt) delivered on Port 3
INT portPwrM4	1.3.6.1.4.1.25868.1.17	INTEGER	read-only	Master Power Port 4 - (in tenths of a Watt) delivered on Port 4
INT portPwrM5	1.3.6.1.4.1.25868.1.18	INTEGER	read-only	Master Power Port 5 - (in tenths of a Watt) delivered on Port 5
INT portPwrM6	1.3.6.1.4.1.25868.1.19	INTEGER	read-only	Master Power Port 6 - (in tenths of a Watt) delivered on Port 6
INT portPwrM7	1.3.6.1.4.1.25868.1.20	INTEGER	read-only	Master Power Port 7 - (in tenths of a Watt) delivered on Port 7
INT portPwrM8	1.3.6.1.4.1.25868.1.21	INTEGER	read-only	Master Power Port 8 - (in tenths of a Watt) delivered on Port 8
OCT modeReqM	1.3.6.1.4.1.25868.1.39	OCTET STRING	read-only	Master CTM2 Port Type Setting - Master ?00?=Type A (Canopy) ?10?=Type B (OFDM), ?01? = Type C (POE 802.3at), ?11? (POE 802.3at 4 Pair), ?100?=(POE 24V mode, CTM2 C Only) listed in order ?Port1?, ?Port2?, ?Port3?, ?Port4?, ?Port5?, ?Port6?, ?Port7?, ?Port8?
INT trpCntGM1	1.3.6.1.4.1.25868.1.45	INTEGER	read-only	Master Auto Restart Count Port 1 - Number of Times Auto Reset Feature has executed a Circuit Breaker Restart on Port 1
INT trpCntGM2	1.3.6.1.4.1.25868.1.46	INTEGER	read-only	Master Auto Restart Count Port 2 - Number of Times Auto Reset Feature has executed a Circuit Breaker Restart on Port 2
INT trpCntGM3	1.3.6.1.4.1.25868.1.47	INTEGER	read-only	Master Auto Restart Count Port 3 - Number of Times Auto Reset Feature has executed a Circuit Breaker Restart on Port 3
INT trpCntGM4	1.3.6.1.4.1.25868.1.48	INTEGER	read-only	Master Auto Restart Count Port 4 - Number of Times Auto Reset Feature has executed a Circuit Breaker Restart on Port 4
INT trpCntGM5	1.3.6.1.4.1.25868.1.49	INTEGER	read-only	Master Auto Restart Count Port 5 - Number of Times Auto Reset Feature has executed a Circuit Breaker Restart on Port 5
INT trpCntGM6	1.3.6.1.4.1.25868.1.50	INTEGER	read-only	Master Auto Restart Count Port 6 - Number of Times Auto Reset Feature has executed a Circuit Breaker Restart on Port 6
INT trpCntGM7	1.3.6.1.4.1.25868.1.51	INTEGER	read-only	Master Auto Restart Count Port 7 - Number of Times Auto Reset Feature has executed a Circuit Breaker Restart on Port 7
INT trpCntGM8	1.3.6.1.4.1.25868.1.52	INTEGER	read-only	Master Auto Restart Count Port 8 - Number of Times Auto Reset Feature has executed a Circuit Breaker Restart on Port 8
INT trpCntBM1	1.3.6.1.4.1.25868.1.53	INTEGER	read-only	Master Ckt Breaker Auto Restart Fail Count Port 1 - Number of Times Auto Reset Feature has failed to restart (after 7 tries) a Circuit Breaker on Port 1
INT trpCntBM2	1.3.6.1.4.1.25868.1.54	INTEGER	read-only	Master Ckt Breaker Auto Restart Fail Count Port 2 - Number of Times Auto Reset Feature has failed to restart (after 7 tries) a Circuit Breaker on Port 2
INT trpCntBM3	1.3.6.1.4.1.25868.1.55	INTEGER	read-only	Master Ckt Breaker Auto Restart Fail Count Port 3 - Number of Times Auto Reset Feature has failed to restart (after 7 tries) a Circuit Breaker on Port 3
INT trpCntBM4	1.3.6.1.4.1.25868.1.56	INTEGER	read-only	Master Ckt Breaker Auto Restart Fail Count Port 4 - Number of Times Auto Reset Feature has failed to restart (after 7 tries) a Circuit Breaker on Port 4
INT trpCntBM5	1.3.6.1.4.1.25868.1.57	INTEGER	read-only	Master Ckt Breaker Auto Restart Fail Count Port 5 - Number of Times Auto Reset Feature has failed to restart (after 7 tries) a Circuit Breaker on Port 5
INT trpCntBM6	1.3.6.1.4.1.25868.1.58	INTEGER	read-only	Master Ckt Breaker Auto Restart Fail Count Port 6 - Number of Times Auto Reset Feature has failed to restart (after 7 tries) a Circuit Breaker on Port 6
INT trpCntBM7	1.3.6.1.4.1.25868.1.59	INTEGER	read-only	Master Ckt Breaker Auto Restart Fail Count Port 7 - Number of Times Auto Reset Feature has failed to restart (after 7 tries) a Circuit Breaker on Port 7
INT trpCntBM8	1.3.6.1.4.1.25868.1.60	INTEGER	read-only	Master Ckt Breaker Auto Restart Fail Count Port 8 - Number of Times Auto Reset Feature has failed to restart (after 7 tries) a Circuit Breaker on Port 8

RFC description

Provides Cabletron multi-media MIB objects for multimedia traffic management and QoS parameter configuration.

Start monitoring Last Mile Gear CTM master power/sync distribution unit with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download CTMMIB

What Is CTMMIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description