CPQSWCC-MIB

All MIBs › CPQSWCC-MIB

Category: Fibre Channel and Storage, Hardware and Environment, Vendor: HP/HPE

Description: Manages HP StorageWorks Command Console providing storage resource configuration and monitoring capabilities.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is CPQSWCC-MIB?

CPQSWCC-MIB is an HP (originally Compaq, 'CPQ' prefix) enterprise MIB supporting the StorageWorks Command Console, a management application for HP storage arrays and SAN infrastructure. The module description and sample objects were not available in the source, but based on its name and vendor history it is expected to expose storage resource configuration and health status objects surfaced through the Command Console management layer. Given its storage-management purpose, such MIBs typically emphasize hardware/software status monitoring: array or controller status, LUN configuration state, disk/component health, and fault or event conditions. It likely depends on HP's broader Compaq/HP enterprise MIB tree and possibly standard storage MIBs for underlying object conventions. It would have been deployed in enterprise data centers managing HP/Compaq StorageWorks SAN or NAS arrays. Engineers can download the CPQSWCC-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in CPQSWCC-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

HP (Compaq) StorageWorks storage array
SAN management console host

Monitoring Examples

No object or table names were available in the source data for this module, so a concrete polling scenario cannot be grounded in real identifiers here; a full parse of the MIB source would be needed to identify specific tables such as array, controller, or LUN status entries.

Imported Objects

From CPQHOST-MIB

compaq	OBJECT-IDENTITY
cpqHoTrapFlags	OBJECT-TYPE

From RFC-1212

OBJECT-TYPE

From RFC-1215

TRAP-TYPE

From RFC1155-SMI

Counter
Gauge
enterprises

From RFC1213-MIB

DisplayString
sysName

OIDs

OID symbolic	OID numeric	Type	Access	Description
cpqSwcc	1.3.6.1.4.1.232.132
cpqSwccMibRev	1.3.6.1.4.1.232.132.1
INT cpqSwccMibRevMajor	1.3.6.1.4.1.232.132.1.1	INTEGER	read-only	The Major Revision level. A change in the major revision level represents a major change in the architecture of the MIB. A change in the major revision level may indicate a significant change in the information supported and/or the meaning of the supported information, correct interpretation of data may require a MIB document with the same major revision level.
INT cpqSwccMibRevMinor	1.3.6.1.4.1.232.132.1.2	INTEGER	read-only	The Minor Revision level. A change in the minor revision level may represent some minor additional support; no changes to any pre-existing information has occurred.
INT cpqSwccMibCondition	1.3.6.1.4.1.232.132.1.3	INTEGER	read-only	The overall condition. This object represents the overall status of the Compaq SWCC system represented by this MIB.
cpqSwccFibre	1.3.6.1.4.1.232.132.2
NTF cpqSwccFibreDeviceStatusChange	1.3.6.1.4.1.232.132.2.0.1			FibreChannel Device Status Change. The SWCC Agent has detected a change in state on one of the managed FibreChannel devices. Variables: sysName The name of the host running the agent. cpqSwccFibreDevName The name of the device which has changed state. cpqSwccFibreDevState The current state of the device. cpqSwccFibreEventDescription A textual description of the reason for the trap.
NTF cpqSwccTapeControllerStatusChange	1.3.6.1.4.1.232.132.2.0.2			FibreChannel Device Status Change. The SWCC Agent has detected a change in state on one of the managed FibreChannel Tape Controller devices. Variables: sysName The name of the host running the agent. cpqSwccFibreDevName The name of the device which has changed state. cpqSwccFibreDevState The current state of the device. cpqSwccFibreEventDescription A textual description of the reason for the trap.
STR cpqSwccFibreDevName	1.3.6.1.4.1.232.132.2.1	DisplayString	read-only	FibreChannel Device Name. The user-assigned name of a specific FC device.
INT cpqSwccFibreDevState	1.3.6.1.4.1.232.132.2.2	INTEGER	read-only	The state of a fibrechannel device.
STR cpqSwccFibreEventDescription	1.3.6.1.4.1.232.132.2.3	DisplayString	read-only	The description of a FibreChannel Device event.
cpqSwccEmuDev	1.3.6.1.4.1.232.132.3
NTF cpqSwccEmuDevDeviceStatusChange	1.3.6.1.4.1.232.132.3.0.1			EMU/Device Manager Device Status Change. The SWCC Agent has detected a change in state on one of the managed devices. Variables: sysName The name of the host running the agent. cpqSwccEmuDevDevName The name of the device which has changed state. cpqSwccEmuDevDevState The current state of the device. cpqSwccEmuDevEventDescription A textual description of the reason for the trap.
STR cpqSwccEmuDevDevName	1.3.6.1.4.1.232.132.3.1	DisplayString	read-only	Device Name. The user-assigned name of a specific managed device.
INT cpqSwccEmuDevDevState	1.3.6.1.4.1.232.132.3.2	INTEGER	read-only	The state of the managed device.
STR cpqSwccEmuDevEventDescription	1.3.6.1.4.1.232.132.3.3	DisplayString	read-only	A description of the event.
cpqSwccKzpcc	1.3.6.1.4.1.232.132.4
cpqSwccKzpccTrap	1.3.6.1.4.1.232.132.4.1
NTF cpqSwccKzpccPhyDeviceEventTrap	1.3.6.1.4.1.232.132.4.1.0.1			Some event has happened to a physical device on a KZPCC controller that a user maybe interested in knowing. The following variables are included in the trap to provide information to the user: Variables: cpqSwccKzpccSystemName - an octet string which will contain ASCII string identifying the name of the system the trap was generated from. cpqSwccKzpccSubsystemName - an octet string which will contain ASCII string identifying the name of the KZPCC controller (as defined by the system) the event occurred on. cpqSwccKzpccEventSeverity - an enumerated integer that identifies the severity level of the event. cpqSwccKzpccEventDescription - an octet string which will contain an ASCII string describing the event that has occurred.
NTF cpqSwccKzpccVirtualDeviceEventTrap	1.3.6.1.4.1.232.132.4.1.0.2			Some event has happened to a virtual device (logical drive) on a KZPCC controller that a user maybe interested in knowing. The following variables are included in the trap to provide information to the user: Variables: cpqSwccKzpccSystemName - an octet string which will contain ASCII string identifying the name of the system the trap was generated from. cpqSwccKzpccSubsystemName - an octet string which will contain ASCII string identifying the name of the KZPCC controller (as defined by the system) the event occurred on. cpqSwccKzpccEventSeverity - an enumerated integer that identifies the severity level of the event. cpqSwccKzpccEventDescription - an octet string which will contain an ASCII string describing the event that has occurred.
NTF cpqSwccKzpccSubsystemEventTrap	1.3.6.1.4.1.232.132.4.1.0.3			Some event has happened to a KZPCC controller that a user maybe interested in knowing. The following variables are included in the trap to provide information to the user: Variables: cpqSwccKzpccSystemName - an octet string which will contain ASCII string identifying the name of the system the trap was generated from. cpqSwccKzpccSubsystemName - an octet string which will contain ASCII string identifying the name of the KZPCC controller (as defined by the system) the event occurred on. cpqSwccKzpccEventSeverity - an enumerated integer that identifies the severity level of the event. cpqSwccKzpccEventDescription - an octet string which will contain an ASCII string describing the event that has occurred.
OCT cpqSwccKzpccSytemName	1.3.6.1.4.1.232.132.4.1.1	OCTET STRING	not-accessible	Variable which contains name of system the trap was generated from. The value of the variable will always be a printable ASCII string.
OCT cpqSwccKzpccSubsytemName	1.3.6.1.4.1.232.132.4.1.2	OCTET STRING	not-accessible	Variable which contains name of subsystem (controller) the trap has been generated for. The value of the variable will always be a printable ASCII string.
INT cpqSwccKzpccEventSeverity	1.3.6.1.4.1.232.132.4.1.3	INTEGER	not-accessible	Variable whose enum value identifies the severity of the event which has occurred.
OCT cpqSwccKzpccEventDescription	1.3.6.1.4.1.232.132.4.1.4	OCTET STRING	not-accessible	Variable which contains description of event which caused trap to be sent. The value of the variable will also be a printable ASCII string.

RFC description

Manages the Compaq StorageWorks Command Console including fibre connectivity and device emulation.

Start monitoring HP (Compaq) StorageWorks Command Console (SAN management) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download CPQSWCC-MIB

What Is CPQSWCC-MIB?

Supported Devices

Monitoring Examples

This MIB depends on

Related MIBs

RFC description