DAHUA-SNMP-MIB

All MIBs › DAHUA-SNMP-MIB

Organization: Organization

Last Updated: 2014-05-10

Category: Fibre Channel and Storage, Vendor: Dahua

Description: Dahua enterprise MIB for IP cameras and NVRs, exposing system info, CPU usage, video stream encoding parameters, storage status, alarm/event configuration, and network settings.

IPNetwork Monitor uses several OIDs from this MIB in network discovery and polling the applicable devices. Start monitoring DAHUA-SNMP-MIB with a free 30-day trial of IPNetwork Monitor.

What Is DAHUA-SNMP-MIB?

DAHUA-SNMP-MIB is Dahua's enterprise MIB for its line of IP cameras and NVRs (network video recorders), exposing system information, CPU usage, video stream encoding parameters, storage status, alarm/event configuration, and network settings. Based on its documented additions, it covers recording configuration and scheduling, per-channel main/extra stream recording detail, physical storage volume totals and free space, and recording/event/SNMP-status notification objects. For hardware/software status monitoring, physicalVolumeTotal, physicalVolumeFree, and physicalVolumeThreshold together allow an operator to track storage disk capacity and free space on the NVR and be warned before recordings fail due to a full disk, while recordEvent/recordMainStreamEvent/recordExtraStreamEvent and snmpStatusEvent/snmpStatus surface recording faults and general SNMP agent/system health as trap-style notifications. It is a self-contained vendor enterprise MIB, though it would typically be deployed alongside standard IETF MIBs (system, host resources) for baseline device health such as CPU and uptime. It is typically deployed in video surveillance deployments where Dahua cameras and NVRs are centrally monitored by a network management or VMS platform. Engineers can download the DAHUA-SNMP-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in DAHUA-SNMP-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Dahua IP camera
Dahua network video recorder (NVR)

Monitoring Examples

An operator would poll physicalVolumeFree against physicalVolumeTotal on an NVR to track available recording storage, and would configure physicalVolumeThreshold so a trap fires before the disk fills and recording stops. recordMainStreamInfoTable and recordExtraStreamInfoTable would be checked per channel to confirm the main and sub (extra) stream encoding/recording settings are correctly applied for each camera. recordEvent and snmpStatusEvent would be monitored as alarm indicators, surfacing recording failures or SNMP agent problems that need investigation.

What Can Be Monitored

total and free storage volume
storage threshold alarm
per-channel main/extra stream recording configuration
recording schedule/plan
recording fault events
SNMP agent status events

Imported Objects

From SNMPv2-SMI

Integer32
IpAddress
MODULE-IDENTITY
NOTIFICATION-TYPE
OBJECT-TYPE
Opaque
TimeTicks
enterprises

From SNMPv2-TC

DisplayString
RowStatus
TEXTUAL-CONVENTION
TruthValue

OIDs

OID symbolic	OID numeric	Type	Access	Description
org	1.3
dod	1.3.6
internet	1.3.6.1
private	1.3.6.1.4
enterprises	1.3.6.1.4.1
dahua	1.3.6.1.4.1.1004849
device	1.3.6.1.4.1.1004849.2			add OID: recordConfig , recordPlanInfo , recordMainStreamInfoTable, recordExtraStreamInfoTable, physicalVolumeTotal, physicalVolumeFree, recordEvent, recordMainStreamEvent, recordExtraStreamEvent, snmpStatusEvent, snmpStatus, physicalVolumeThreshold
systemInfo	1.3.6.1.4.1.1004849.2.1
versionInfo	1.3.6.1.4.1.1004849.2.1.1
STR softwareRevision	1.3.6.1.4.1.1004849.2.1.1.1	DisplayString	read-only	The software version
STR hardwareRevision	1.3.6.1.4.1.1004849.2.1.1.2	DisplayString	read-only	The hardware version
productInfo	1.3.6.1.4.1.1004849.2.1.2
INT videoChannel	1.3.6.1.4.1.1004849.2.1.2.1	INTEGER	read-only	The number of video channel.
INT alarmInput	1.3.6.1.4.1.1004849.2.1.2.2	INTEGER	read-only	The number of alarm input.
INT alarmOutput	1.3.6.1.4.1.1004849.2.1.2.3	INTEGER	read-only	The number of alarm output.
STR serialNumber	1.3.6.1.4.1.1004849.2.1.2.4	DisplayString	read-only	The device serial number.
STR systemVersion	1.3.6.1.4.1.1004849.2.1.2.5	DisplayString	read-only	The system Version of device.
STR deviceType	1.3.6.1.4.1.1004849.2.1.2.6	DisplayString	read-only	The device mode.
STR deviceClass	1.3.6.1.4.1.1004849.2.1.2.7	DisplayString	read-only	The device class.
INT deviceStatus	1.3.6.1.4.1.1004849.2.1.2.8	INTEGER	read-only	Status of device is bad(0) or good(1).
STR machineName	1.3.6.1.4.1.1004849.2.1.2.9	DisplayString	read-only	The name of the device.
INT cpuUsage	1.3.6.1.4.1.1004849.2.1.3	INTEGER	read-only	Usage of the CPU.
STR lastestEvent	1.3.6.1.4.1.1004849.2.1.4	DisplayString	read-only	The type of the lastest event.
INT encodeNo	1.3.6.1.4.1.1004849.2.1.5	INTEGER	read-only	The number of encode channels which are available.
networkInfo	1.3.6.1.4.1.1004849.2.2
networkPort	1.3.6.1.4.1.1004849.2.2.1
INT tcpPort	1.3.6.1.4.1.1004849.2.2.1.1	INTEGER	read-write	TCP port.
INT udpPort	1.3.6.1.4.1.1004849.2.2.1.2	INTEGER	read-write	UDP port.
INT httpPort	1.3.6.1.4.1.1004849.2.2.1.3	INTEGER	read-write	HTTP port.
INT rtspPort	1.3.6.1.4.1.1004849.2.2.1.4	INTEGER	read-write	RTSP port.
INT maxConnectNum	1.3.6.1.4.1.1004849.2.2.1.5	INTEGER	read-write	The number of max connect.
INT httpsPort	1.3.6.1.4.1.1004849.2.2.1.6	INTEGER	read-write	HTTPS port.
tcpIpInfo	1.3.6.1.4.1.1004849.2.2.2
INT getIpmode	1.3.6.1.4.1.1004849.2.2.2.1	INTEGER	read-write	The mode of getting IP, value: 0=static, 1=DHCP.
STR macAddr	1.3.6.1.4.1.1004849.2.2.2.2	DisplayString	read-only	The address of MAC.
INT ipVersion	1.3.6.1.4.1.1004849.2.2.2.3	INTEGER	read-write	The version of IP, value: 0=IPv4, 1=IPv6.
STR subnetMast	1.3.6.1.4.1.1004849.2.2.2.4	DisplayString	read-write	The infomation of subnet mast.
STR defaultGateway	1.3.6.1.4.1.1004849.2.2.2.5	DisplayString	read-write	The infomation of default gateway.
STR preferredDns	1.3.6.1.4.1.1004849.2.2.2.6	DisplayString	read-write	The infomation of the preferred DNS service address.
STR alternateDns	1.3.6.1.4.1.1004849.2.2.2.7	DisplayString	read-write	The infomation of the alternate DNS service address.
STR ipAddr	1.3.6.1.4.1.1004849.2.2.2.8	DisplayString	read-only	The address of IP.
configInfo	1.3.6.1.4.1.1004849.2.3
encodeConfig	1.3.6.1.4.1.1004849.2.3.1
mainStreamInfo	1.3.6.1.4.1.1004849.2.3.1.1
regularStreamInfoTable	1.3.6.1.4.1.1004849.2.3.1.1.1		not-accessible	infomation of the main stream channel
regularStreamInfoTableEntry	1.3.6.1.4.1.1004849.2.3.1.1.1.1		not-accessible	infomation of the main stream channel list
INT regularChannelNo	1.3.6.1.4.1.1004849.2.3.1.1.1.1.1	INTEGER	read-only	The number of main channel.
STR regularCompression	1.3.6.1.4.1.1004849.2.3.1.1.1.1.2	DisplayString	read-write	The compression mode of the main channel which stream-type is the regular.
INT regularFPS	1.3.6.1.4.1.1004849.2.3.1.1.1.1.3	INTEGER	read-write	compression mode of the main channel which stream-type is the move-detection
STR regularResolution	1.3.6.1.4.1.1004849.2.3.1.1.1.1.4	DisplayString	read-write	compression mode of the main channel which stream-type is the alarm
mdStreamInfoTable	1.3.6.1.4.1.1004849.2.3.1.1.2		not-accessible	infomation of the main stream channel
mdStreamInfoTableEntry	1.3.6.1.4.1.1004849.2.3.1.1.2.1		not-accessible	infomation of the main stream channel list
INT mdChannelNo	1.3.6.1.4.1.1004849.2.3.1.1.2.1.1	INTEGER	read-only	The number of main channel.
STR mdCompression	1.3.6.1.4.1.1004849.2.3.1.1.2.1.2	DisplayString	read-write	The compression mode of the main channel which stream-type is the regular.
INT mdFPS	1.3.6.1.4.1.1004849.2.3.1.1.2.1.3	INTEGER	read-write	compression mode of the main channel which stream-type is the move-detection
STR mdResolution	1.3.6.1.4.1.1004849.2.3.1.1.2.1.4	DisplayString	read-write	compression mode of the main channel which stream-type is the alarm
alarmStreamInfoTable	1.3.6.1.4.1.1004849.2.3.1.1.3		not-accessible	infomation of the main stream channel
alarmStreamInfoTableEntry	1.3.6.1.4.1.1004849.2.3.1.1.3.1		not-accessible	infomation of the main stream channel list
INT alarmChannelNo	1.3.6.1.4.1.1004849.2.3.1.1.3.1.1	INTEGER	read-only	The number of main channel.
STR alarmCompression	1.3.6.1.4.1.1004849.2.3.1.1.3.1.2	DisplayString	read-write	The compression mode of the main channel which stream-type is the regular.
INT alarmFPS	1.3.6.1.4.1.1004849.2.3.1.1.3.1.3	INTEGER	read-write	compression mode of the main channel which stream-type is the move-detection
STR alarmResolution	1.3.6.1.4.1.1004849.2.3.1.1.3.1.4	DisplayString	read-write	compression mode of the main channel which stream-type is the alarm
extraStreamInfo	1.3.6.1.4.1.1004849.2.3.1.2
extra1StreamInfoTable	1.3.6.1.4.1.1004849.2.3.1.2.1		not-accessible	infomation of the extra stream channel
extra1StreamInfoEntry	1.3.6.1.4.1.1004849.2.3.1.2.1.1		not-accessible	infomation of the main stream channel list
INT extra1ChannelNo	1.3.6.1.4.1.1004849.2.3.1.2.1.1.1	INTEGER	read-only	extra channel number
STR extra1Compression	1.3.6.1.4.1.1004849.2.3.1.2.1.1.2	DisplayString	read-write	compression mode of the extra channel which stream-type is the first-extra
INT extra1FPS	1.3.6.1.4.1.1004849.2.3.1.2.1.1.3	INTEGER	read-write	FPS of the extra channel which stream-type is the first-extra
STR extra1Resolution	1.3.6.1.4.1.1004849.2.3.1.2.1.1.4	DisplayString	write-only	resolution type of the extra channel which stream-type is the first-extra
eventConfig	1.3.6.1.4.1.1004849.2.3.2
videoDetectConfig	1.3.6.1.4.1.1004849.2.3.2.1
videoMotionInfoTable	1.3.6.1.4.1.1004849.2.3.2.1.1		not-accessible	infomation of the extra stream channel
videoMotionInfoEntry	1.3.6.1.4.1.1004849.2.3.2.1.1.1		not-accessible	infomation of the main stream channel list
INT videoMotionIndex	1.3.6.1.4.1.1004849.2.3.2.1.1.1.1	INTEGER	read-write
videoLossInfoTable	1.3.6.1.4.1.1004849.2.3.2.1.2		not-accessible	infomation of the extra stream channel
videoLossInfoEntry	1.3.6.1.4.1.1004849.2.3.2.1.2.1		not-accessible	infomation of the main stream channel list
INT videoLossIndex	1.3.6.1.4.1.1004849.2.3.2.1.2.1.1	INTEGER	read-write
videoBlindInfoTable	1.3.6.1.4.1.1004849.2.3.2.1.3		not-accessible	infomation of the extra stream channel
videoBlindInfoEntry	1.3.6.1.4.1.1004849.2.3.2.1.3.1		not-accessible	infomation of the main stream channel list
INT videoBlindIndex	1.3.6.1.4.1.1004849.2.3.2.1.3.1.1	INTEGER	read-write
alarmConfig	1.3.6.1.4.1.1004849.2.3.2.2
localAlarmInfoTable	1.3.6.1.4.1.1004849.2.3.2.2.1		not-accessible	infomation of the extra stream channel
localAlarmInfoEntry	1.3.6.1.4.1.1004849.2.3.2.2.1.1		not-accessible	infomation of the main stream channel list
INT localAlarmIndex	1.3.6.1.4.1.1004849.2.3.2.2.1.1.1	INTEGER	read-write
networkAlarmInfoTable	1.3.6.1.4.1.1004849.2.3.2.2.2		not-accessible	infomation of the extra stream channel
networkAlarmInfoEntry	1.3.6.1.4.1.1004849.2.3.2.2.2.1		not-accessible	infomation of the main stream channel list
INT networkAlarmIndex	1.3.6.1.4.1.1004849.2.3.2.2.2.1.1	INTEGER	read-write
exceptionConfig	1.3.6.1.4.1.1004849.2.3.2.3
recordConfig	1.3.6.1.4.1.1004849.2.3.3
recordPlanInfo	1.3.6.1.4.1.1004849.2.3.3.1
recordMainStreamInfoTable	1.3.6.1.4.1.1004849.2.3.3.1.1		not-accessible	infomation of the extra stream channel
recordMainStreamInfoEntry	1.3.6.1.4.1.1004849.2.3.3.1.1.1		not-accessible	config infomation of the main stream record channel list
INT recordMainChannelIndex	1.3.6.1.4.1.1004849.2.3.3.1.1.1.1	INTEGER	read-write
storageInfo	1.3.6.1.4.1.1004849.2.4
physicalVolumeInfoTable	1.3.6.1.4.1.1004849.2.4.1		not-accessible	infomation of the extra stream channel
physicalVolumeInfoEntry	1.3.6.1.4.1.1004849.2.4.1.1		not-accessible	infomation of the main stream channel list
INT physicalVolumeIndex	1.3.6.1.4.1.1004849.2.4.1.1.1	INTEGER	read-write
INT physicNo	1.3.6.1.4.1.1004849.2.4.1.1.2	INTEGER	read-write
INT logicNo	1.3.6.1.4.1.1004849.2.4.1.1.3	INTEGER	read-write
STR physicalVolumeName	1.3.6.1.4.1.1004849.2.4.1.1.4	DisplayString	read-only
STR physicalVolumeStatus	1.3.6.1.4.1.1004849.2.4.1.1.5	DisplayString	read-only
products	1.3.6.1.4.1.1004849.2.10
dvr	1.3.6.1.4.1.1004849.2.10.1
nvr	1.3.6.1.4.1.1004849.2.10.2
ipc	1.3.6.1.4.1.1004849.2.10.3
notification	1.3.6.1.4.1.1004849.2.11
NTF snmpStatusEvent	1.3.6.1.4.1.1004849.2.11.2			A snmp work status Event.
multiMediaEvent	1.3.6.1.4.1.1004849.2.11.11
NTF videoMotionEvent	1.3.6.1.4.1.1004849.2.11.11.1			video motion Event.
NTF videoBlindEvent	1.3.6.1.4.1.1004849.2.11.11.2			video motion Event.
NTF videoLossEvent	1.3.6.1.4.1.1004849.2.11.11.3			video motion Event.
alarmEvent	1.3.6.1.4.1.1004849.2.11.12
NTF localAlarmEvent	1.3.6.1.4.1.1004849.2.11.12.1			video motion Event.
storageEvent	1.3.6.1.4.1.1004849.2.11.13
NTF storageFailureEvent	1.3.6.1.4.1.1004849.2.11.13.1			storage failure Event.
NTF storageLowSpaceEvent	1.3.6.1.4.1.1004849.2.11.13.2			storage full Event. if all storages are full, logicNo= 0 .
NTF storageInOutEvent	1.3.6.1.4.1.1004849.2.11.13.3			storage in-out Event.
NTF storageSMARTAbnormityEvent	1.3.6.1.4.1.1004849.2.11.13.4			storage SMART abnormity Event.
recordEvent	1.3.6.1.4.1.1004849.2.11.14
NTF recordMainStreamEvent	1.3.6.1.4.1.1004849.2.11.14.1			record MainStream Event.
NTF recordExtraStreamEvent	1.3.6.1.4.1.1004849.2.11.14.2			record ExtraStream Event.
dahuaSnmpTrap	1.3.6.1.4.1.1004849.2.12
STR action	1.3.6.1.4.1.1004849.2.12.1	DisplayString	accessible-for-notify	trap info
STR currentTime	1.3.6.1.4.1.1004849.2.12.2	DisplayString	accessible-for-notify	trap info
INT snmpStatus	1.3.6.1.4.1.1004849.2.12.3	INTEGER	accessible-for-notify	Status of snmp is start(0) or stop(1).
INT physicalVolumeThreshold	1.3.6.1.4.1.1004849.2.12.4	INTEGER	accessible-for-notify

RFC description

Dahua device SNMP MIB extensions for DVRs, NVRs, and IP cameras providing system info, storage, and event notifications.

Start monitoring Dahua IP camera/network video recorder (NVR) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download DAHUA-SNMP-MIB

What Is DAHUA-SNMP-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description