All MIBs › CPQHSV110V3-MIB › sCellEventTrap45
sCellEventTrap45
Module: CPQHSV110V3-MIB
OID (symbolic): CPQHSV110V3-MIB::sCellEventTrap45
OID (numeric): 1.3.6.1.4.1.232.0.13601029
Node type: NOTIFICATION-TYPE
Description: Severity: Normal -- informational in nature. The Storage System Event Log validation failed. The content of the cinfo.scelcbi.status field, the cinfo.scelcbi structure, and the minfo.scelmi structure show the state of the Storage System Event Log at the time of the failure. The content and state of the Storage System Event Log have been initialized to their initial operational settings. The meaning of the status value contained in the cinfo.scelcbi.status field is as follows:
- 1 = Cookie value is not as expected.
- 2 = Event data overflows the buffer.
- 3 = Event data size is not a multiple of 4 bytes, is less than the minimum, or is greater than the maximum.
- 4 = Event Information Packet type is greater than the maximum.
- 5 = Event information size is not a multiple of 4 bytes, is less than the minimum, is greater than the maximum, doesn't match the Event Information Packet type size, or when combined with the entry header size doesn't equal the entry size.
- 6 = Event code is zero.
- 7 = Event is out of sequence.
- 8 = Dead space area at the end of a partially packed buffer contains a nonzero value.
- 9 = An event data block containing a nonzero value was found after end of event data was detected.
- A = Sequence number reset flag not set as expected.
- B = The event log contains no entries.
- C = Event data block read failed during maintenance verification.
- D = Event data block read failed during maintenance completion.
- E = Event data block erase failed during maintenance completion.
- F = Control block read failed during maintenance verification.
- 17= The event log was destroyed and prepared for re-initialization.
Note: The content of the ainfo fields, cinfo.sctelcbi structure, and minfo.sctelmi structure is undefined.
Examples
Send this trap to an SNMP manager — replace <manager> with the IP or hostname of your monitoring server (SNMPv2c):
snmptrap -v2c -c public <manager> '' CPQHSV110V3-MIB::sCellEventTrap45 snmptrap -v2c -c public <manager> '' 1.3.6.1.4.1.232.0.13601029
Listen for incoming traps on the manager host (-f keeps it in the foreground, -Lo prints to stdout — useful for testing):
snmptrapd -f -Lo -c /dev/null authCommunity log public
Example snmptrapd log entry:
zoo11-linux.zoo [UDP: [192.168.30.111]:55261->[192.168.30.10]:162]: DISMAN-EVENT-MIB::sysUpTimeInstance = Timeticks: (453057501) 52 days, 10:29:35.01 SNMPv2-MIB::snmpTrapOID.0 = OID: CPQHSV110V3-MIB::sCellEventTrap45
Start monitoring HP StorageWorks HSV110 (EVA) array controller with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CPQHSV110V3-MIB::sCellEventTrap45 OID value, configure state conditions and alerts, and monitor any HP StorageWorks HSV110 (EVA) array controller from a single console.
OID Breakdown
Upper-level ancestors (7 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.232 | compaq | COMPAQ-ID-REC-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.232.0.13601029 | sCellEventTrap45 | CPQHSV110V3-MIB |