CPQHSV110V3-MIB DEFINITIONS ::= BEGIN
IMPORTS
enterprises FROM RFC1155-SMI
OBJECT-TYPE FROM RFC-1212
DisplayString FROM RFC1213-MIB
TRAP-TYPE FROM RFC-1215;
compaq OBJECT IDENTIFIER ::= { enterprises 232 }
cpqElementManager OBJECT IDENTIFIER ::= { compaq 136 }
cpqHSV OBJECT IDENTIFIER ::= { cpqElementManager 1 }
-- CPQELEMMNGR MIB
cpqHSVAgent OBJECT IDENTIFIER ::= { cpqHSV 1 }
cpqHSVServer OBJECT IDENTIFIER ::= { cpqHSV 2 }
hsvObject OBJECT IDENTIFIER ::= { cpqHSV 3 }
maHSVMibRev OBJECT IDENTIFIER ::= { cpqHSV 4 }
-- HSV SAN OBJECTS
scell OBJECT IDENTIFIER ::= { hsvObject 1 }
agent OBJECT IDENTIFIER ::= { hsvObject 2 }
host OBJECT IDENTIFIER ::= { hsvObject 3 }
nsc OBJECT IDENTIFIER ::= { hsvObject 4 }
shelf OBJECT IDENTIFIER ::= { hsvObject 8 }
-- ********************************************************************
-- Agent Information Group 1.3.6.1.4.1.232.136.1.1
-- 1.3.6.1.4.1.232.136.1.1.1
agManufacturer OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The name of the StorageWorks HSV Agent manufacturer."
::= { cpqHSVAgent 1 }
-- 1.3.6.1.4.1.232.136.1.1.2
agMajVersion OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"StorageWorks HSV Agent Major Version Number (e.g., 3
for 3.0)."
::= { cpqHSVAgent 2 }
-- 1.3.6.1.4.1.232.136.1.1.3
agMinVersion OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"StorageWorks HSV Agent Minor Version Number (e.g., 0
for 3.0)."
::= { cpqHSVAgent 3 }
-- 1.3.6.1.4.1.232.136.1.1.4
agHostName OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The Host System Network Name where the agent resides."
::= { cpqHSVAgent 4 }
-- 1.3.6.1.4.1.232.136.1.1.5
agEnterprise OBJECT-TYPE
SYNTAX OBJECT IDENTIFIER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The Enterprise ID subtree for StorageWorks HSV Agent MIB
is registered."
::= { cpqHSVAgent 5 }
-- 1.3.6.1.4.1.232.136.1.1.6
agDescription OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The StorageWorks HSV Agent description."
::= { cpqHSVAgent 6 }
-- 1.3.6.1.4.1.232.136.1.1.7
agStatusTable OBJECT-TYPE
SYNTAX SEQUENCE OF AgentEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This table holds the status information for
each HSV Management Agent."
::= { cpqHSVAgent 7 }
-- 1.3.6.1.4.1.232.136.1.1.7.1
agentEntry OBJECT-TYPE
SYNTAX AgentEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The Agent information entry."
INDEX { agentEntryIndex }
::= { agStatusTable 1 }
AgentEntry ::=
SEQUENCE{
agentEntryIndex
INTEGER,
agentStatus
INTEGER,
agentEventCode
INTEGER,
agentEventLevel
INTEGER,
agentEventTimeDate
DisplayString,
agentEventDescription
DisplayString
}
-- 1.3.6.1.4.1.232.136.1.1.7.1.1
agentEntryIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The index into agentStatusTable ."
::= { agentEntry 1 }
-- 1.3.6.1.4.1.232.136.1.1.7.1.2
agentStatus OBJECT-TYPE
SYNTAX INTEGER {
other(1),
ok(2),
degraded(3),
failed(4)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This variable reports the overall status of the
Agent.
INFORMATIONAL: Normal Operating Condition
MINOR: Warning Condition
MAJOR: Failure or Failure Immanent
CRITICAL: Agent condition is critical or unknown"
::= { agentEntry 2 }
-- 1.3.6.1.4.1.232.136.1.1.7.1.3
agentEventCode OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The management agent event code."
::= { agentEntry 3 }
-- 1.3.6.1.4.1.232.136.1.1.7.1.4
agentEventLevel OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The management event level."
::= { agentEntry 4 }
-- 1.3.6.1.4.1.232.136.1.1.7.1.5
agentEventTimeDate OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The date and time the event occurred dd-mm-yyyy/hr:min:sec."
::= { agentEntry 5 }
-- 1.3.6.1.4.1.232.136.1.1.7.1.6
agentEventDescription OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The Description of the management agent event."
::= { agentEntry 6 }
-- Workstation Group *****************************************************
srvCPU OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The server CPU type (e.g., 80486)."
::= { cpqHSVServer 1 }
srvComputerType OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The server Computer type (e.g., PC/AT)."
::= { cpqHSVServer 2 }
srvModel OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The server model number."
::= { cpqHSVServer 3 }
srvSubModel OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The server submodel number."
::= { cpqHSVServer 4 }
srvBiosVersion OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The server BIOS Version."
::= { cpqHSVServer 5 }
srvOS OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The server operating system name (e.g., WINNT)."
::= { cpqHSVServer 6 }
srvOSMajVersion OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The server OS major version number
(e.g., 3 for WINNT 3.51)."
::= { cpqHSVServer 7 }
srvOSMinVersion OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The server OS minor version number (e.g., 51 for
WINNT 3.51)."
::= { cpqHSVServer 8 }
-- maHSVMibRev Group 1.3.6.1.4.1.232.136.1.4
-- 1.3.6.1.4.1.232.136.1.4.1
maHSVMibRevMajor OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The Major Revision level.
A change in the major revision level represents a major change
in the architecture of the MIB. A change in the major revision
level may indicate a significant change in the information
supported and/or the meaning of the supported information,
correct interpretation of data may require a MIB document with
the same major revision level."
::= { maHSVMibRev 1 }
-- 1.3.6.1.4.1.232.136.1.4.2
maHSVMibRevMinor OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The Minor Revision level.
A change in the minor revision level may represent some minor
additional support, no changes to any pre-existing information
has occurred."
::= { maHSVMibRev 2 }
-- Object Groups 1.3.6.1.4.1.232.136.1.3
-- *********************************************************************
-- StorageCell Group 1.3.6.1.4.1.232.136.1.3.1 = scell
-- 1.3.6.1.4.1.232.136.1.3.1.1
scellTotal OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The total number of StorageCells (storage pools) present
in the Fusion System."
::= { scell 1 }
-- 1.3.6.1.4.1.232.136.1.3.1.2
scellStatusTable OBJECT-TYPE
SYNTAX SEQUENCE OF ScellEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This table holds the status information for
each StorageCell."
::= { scell 2 }
-- 1.3.6.1.4.1.232.136.1.3.1.2.1
scellEntry OBJECT-TYPE
SYNTAX ScellEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The StorageCell information entry."
INDEX { scellEntryIndex }
::= { scellStatusTable 1 }
ScellEntry ::=
SEQUENCE{
scellEntryIndex
INTEGER,
scellName
DisplayString,
scellUUID
DisplayString,
scellStatus
INTEGER,
scellEventDescription
DisplayString,
scellEventTimeDate
DisplayString,
scellEventCode
DisplayString,
scellSWComponent
INTEGER,
scellECode
INTEGER,
scellCAC
INTEGER,
scellEIP
INTEGER,
scellNameDateTime
DisplayString
}
-- 1.3.6.1.4.1.232.136.1.3.1.2.1.1
scellEntryIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The index into scellStatusTable ."
::= { scellEntry 1 }
-- 1.3.6.1.4.1.232.136.1.3.1.2.1.2
scellName OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The StorageCell Name."
::= { scellEntry 2 }
-- 1.3.6.1.4.1.232.136.1.3.1.2.1.3
scellUUID OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The StorageCell unique ID."
::= { scellEntry 3 }
-- 1.3.6.1.4.1.232.136.1.3.1.2.1.4
scellStatus OBJECT-TYPE
SYNTAX INTEGER {
informational(1),
minor(2),
major(3),
failed(4)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This variable reports the overall status of the
StorageCell.
INFORMATIONAL: Normal Operating Condition
MINOR: Warning Condition
MAJOR: Failure or Failure Immanent
CRITICAL: Condition is critical or unknown"
::= { scellEntry 4 }
-- 1.3.6.1.4.1.232.136.1.3.1.2.1.5
scellEventDescription OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The StorageCell Event Description."
::= { scellEntry 5 }
-- 1.3.6.1.4.1.232.136.1.3.1.2.1.6
scellEventTimeDate OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The StorageCell Event Time and Date."
::= { scellEntry 6 }
-- 1.3.6.1.4.1.232.136.1.3.1.2.1.7
scellEventCode OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The StorageCell Event Code."
::= { scellEntry 7 }
-- 1.3.6.1.4.1.232.136.1.3.1.2.1.8
scellSWComponent OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The Event Code Software Component ID."
::= { scellEntry 8 }
-- 1.3.6.1.4.1.232.136.1.3.1.2.1.9
scellECode OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The StorageCell Event Code event number."
::= { scellEntry 9 }
-- 1.3.6.1.4.1.232.136.1.3.1.2.1.10
scellCAC OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The event code Corrective Action Code."
::= { scellEntry 10 }
-- 1.3.6.1.4.1.232.136.1.3.1.2.1.11
scellEIP OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The Event Code EIP Type."
::= { scellEntry 11 }
-- 1.3.6.1.4.1.232.136.1.3.1.2.1.12
scellNameDateTime OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The StorageCell Name: Date & Time of Event."
::= { scellEntry 12 }
-- /*****************************************************************/
-- Host Group 1.3.6.1.4.1.232.136.1.3.3
hostTotal OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The total number of hosts attached the Fusion System."
-- 1.3.6.1.4.1.232.136.1.3.3.3.1
::= { host 1 }
hostStatusTable OBJECT-TYPE
SYNTAX SEQUENCE OF HostEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This table holds the status information for
each Host."
-- 1.3.6.1.4.1.232.136.1.3.3.3.2
::= { host 2 }
hostEntry OBJECT-TYPE
SYNTAX HostEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The Host information entry."
INDEX { hostEntryIndex }
-- 1.3.6.1.4.1.232.136.1.3.3.3.2.1
::= { hostStatusTable 1 }
HostEntry ::=
SEQUENCE{
hostEntryIndex
INTEGER,
hostName
DisplayString,
hostUUID
DisplayString,
hostStatus
INTEGER
}
hostEntryIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The index into hostStatusTable ."
-- 1.3.6.1.4.1.232.136.1.3.3.3.2.1.1
::= { hostEntry 1 }
hostName OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The Host Name."
-- 1.3.6.1.4.1.232.136.1.3.3.3.2.1.2
::= { hostEntry 2 }
hostUUID OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The Host unique ID."
-- 1.3.6.1.4.1.232.136.1.3.3.3.2.1.3
::= { hostEntry 3 }
hostStatus OBJECT-TYPE
SYNTAX INTEGER {
informational(0),
minor(1),
major(2),
critical(3)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This variable reports the overall status of the Host.
INFORMATIONAL: Normal Operating Condition
MINOR: Warning Condition
MAJOR: Failure or Failure Immanent
CRITICAL: Condition is critical or unknown"
-- 1.3.6.1.4.1.232.136.1.3.3.3.2.1.4
::= { hostEntry 4 }
-- Network Storage Controller Group 1.3.6.1.4.1.232.136.1.3.3.4
nscTotal OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The total number of Network Storage Controllers present in the Fusion System."
-- 1.3.6.1.4.1.232.136.1.3.3.4.1
::= { nsc 1 }
nscStatusTable OBJECT-TYPE
SYNTAX SEQUENCE OF NscEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This table holds the status information for
each Network Storage Controller."
-- 1.3.6.1.4.1.232.136.1.3.3.4.2
::= { nsc 2 }
nscEntry OBJECT-TYPE
SYNTAX NscEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The NSC information entry."
INDEX { nscEntryIndex }
-- 1.3.6.1.4.1.232.136.1.3.3.4.2.1
::= { nscStatusTable 1 }
NscEntry ::=
SEQUENCE{
nscEntryIndex
INTEGER,
nscName
DisplayString,
nscUUID
DisplayString,
nscStatus
INTEGER
}
nscEntryIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The index into nscStatusTable ."
-- 1.3.6.1.4.1.232.136.1.3.3.4.2.1.1
::= { nscEntry 1 }
nscName OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The Network Storage Controller Name."
-- 1.3.6.1.4.1.232.136.1.3.3.4.2.1.2
::= { nscEntry 2 }
nscUUID OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The NSC unique ID."
-- 1.3.6.1.4.1.232.136.1.3.3.4.2.1.3
::= { nscEntry 3 }
nscStatus OBJECT-TYPE
SYNTAX INTEGER {
informational(0),
minor(1),
major(2),
critical(3)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This variable reports the overall status of the
Network Storage Controller.
INFORMATIONAL: Normal Operating Condition
MINOR: Warning Condition
MAJOR: Failure or Failure Immanent
CRITICAL: Condition is critical or unknown"
-- 1.3.6.1.4.1.232.136.1.3.3.4.2.1.4
::= { nscEntry 4 }
-- Shelf Group 1.3.6.1.4.1.232.136.1.3.8
-- 1.3.6.1.4.1.232.136.1.3.8.1
shelfTotal OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The total number of disk shelves present in the HSV system."
::= { shelf 1 }
-- 1.3.6.1.4.1.232.136.1.3.8.2
shelfStatusTable OBJECT-TYPE
SYNTAX SEQUENCE OF ShelfEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This table holds the status information for
each Shelf."
::= { shelf 2 }
-- 1.3.6.1.4.1.232.136.1.3.8.2.1
shelfEntry OBJECT-TYPE
SYNTAX ShelfEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The Shelf information entry."
INDEX { shelfEntryIndex }
::= { shelfStatusTable 1 }
ShelfEntry ::=
SEQUENCE{
shelfEntryIndex
INTEGER,
shelfStatus
INTEGER,
shelfId
INTEGER,
shelfElementType
INTEGER,
shelfElementNum
INTEGER,
shelfErrorCode
INTEGER
}
-- 1.3.6.1.4.1.232.136.1.3.8.2.1.1
shelfEntryIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The index into shelfStatusTable ."
::= { shelfEntry 1 }
-- 1.3.6.1.4.1.232.136.1.3.8.2.1.2
shelfStatus OBJECT-TYPE
SYNTAX INTEGER {
other(1),
ok(2),
degraded(3),
failed(4)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This variable reports the overall status of the
Shelf.
OTHER: unknown or undeterminable
OK: Normal Operating Condition
DEGRADED: Warning Condition
FAILED: Failure"
::= { shelfEntry 2 }
-- 1.3.6.1.4.1.232.136.1.3.8.2.1.3
shelfId OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The Shelf Id (shelf number)."
::= { shelfEntry 3 }
-- 1.3.6.1.4.1.232.136.1.3.8.2.1.4
shelfElementType OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The Shelf Element type.
01: Disk
02: Power Supply
03: Fan
04: Temp Sensor
06: Alarm Horn
07: EMU
12: LCD
15: GBIC
16: Language
17: Comm Port
18: Volt Sensor
19: Amp Sensor
128:Enclosure
130:Back plane
255:Host"
::= { shelfEntry 4 }
-- 1.3.6.1.4.1.232.136.1.3.8.2.1.5
shelfElementNum OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Which particular Element of that type."
::= { shelfEntry 5 }
-- 1.3.6.1.4.1.232.136.1.3.8.2.1.6
shelfErrorCode OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The Element Type's Error Code."
::= { shelfEntry 6 }
-- Traps
emuEventTrapInformative TRAP-TYPE
ENTERPRISE compaq
VARIABLES { scellNameDateTime,
shelfId,
shelfElementType,
shelfElementNum,
shelfErrorCode }
DESCRIPTION
"An EMU Informational event has occurred
scellNameDateTime: StorageCell name, and date/time
emuShelfId: disk shelf number in the cabinet
emuElementType: the element type
01: Disk
02: Pwr Supply
03: Fan
04: Temp Sensor
06: Alarm Horn
07: EMU
12: LCD
15: Xcvr
16: Lang
17: Comm Port
18: Volt Sensor
19: Amp Sensor
128:Encl
130:Back plane
emuErrorCode: error number "
--#TYPE "EMU Informational Event"
--#SUMMARY "scellNameDateTime %s : emuShelfId %d : emuElementType %d : emuElementNum %d : emuErrorCode %d"
--#ARGUMENTS {0,1,2,3,4}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
--#STATE OK
::= 136001
emuEventTrapNoncritical TRAP-TYPE
ENTERPRISE compaq
VARIABLES { scellNameDateTime,
shelfId,
shelfElementType,
shelfElementNum,
shelfErrorCode }
DESCRIPTION
"An EMU Non-critical event has occurred
scellNameDateTime: StorageCell name, and date/time
emuShelfId: disk shelf number in the cabinet
emuElementType: the element type
01: Disk
02: Pwr Supply
03: Fan
04: Temp Sensor
06: Alarm Horn
07: EMU
12: LCD
15: Xcvr
16: Lang
17: Comm Port
18: Volt Sensor
19: Amp Sensor
128:Encl
130:Back plane
emuErrorCode: error number "
--#TYPE "EMU Non Critical Event"
--#SUMMARY "scellNameDateTime %s : emuShelfId %d : emuElementType %d : emuElementNum %d : emuErrorCode %d"
--#ARGUMENTS {0,1,2,3,4}
--#SEVERITY MINOR
--#TIMEINDEX 136
--#STATE WARNING
::= 136002
emuEventTrapCritical TRAP-TYPE
ENTERPRISE compaq
VARIABLES { scellNameDateTime,
shelfId,
shelfElementType,
shelfElementNum,
shelfErrorCode }
DESCRIPTION
"An EMU Critical event has occurred
scellNameDateTime: StorageCell name, and date/time
emuShelfId: disk shelf number in the cabinet
emuElementType: the element type
01: Disk
02: Pwr Supply
03: Fan
04: Temp Sensor
06: Alarm Horn
07: EMU
12: LCD
15: Xcvr
16: Lang
17: Comm Port
18: Volt Sensor
19: Amp Sensor
128:Encl
130:Back plane
emuErrorCode: error number "
--#TYPE "EMU Critical Event"
--#SUMMARY "scellNameDateTime %s : emuShelfId %d : emuElementType %d : emuElementNum %d : emuErrorCode %d"
--#ARGUMENTS {0,1,2,3,4}
--#SEVERITY CRITICAL
--#TIMEINDEX 136
--#STATE CRITICAL
::= 136003
emuEventTrapUnrecoverable TRAP-TYPE
ENTERPRISE compaq
VARIABLES { scellNameDateTime,
shelfId,
shelfElementType,
shelfElementNum,
shelfErrorCode }
DESCRIPTION
"An EMU Unrecoverable event has occurred
scellNameDateTime: StorageCell name, and date/time
emuShelfId: disk shelf number in the cabinet
emuElementType: the element type
01: Disk
02: Pwr Supply
03: Fan
04: Temp Sensor
06: Alarm Horn
07: EMU
12: LCD
15: Xcvr
16: Lang
17: Comm Port
18: Volt Sensor
19: Amp Sensor
128:Encl
130:Back plane
emuErrorCode: error number "
--#TYPE "EMU Unrecoverable Event"
--#SUMMARY "scellNameDateTime %s : emuShelfId %d : emuElementType %d : emuElementNum %d : emuErrorCode %d"
--#ARGUMENTS {0,1,2,3,4}
--#SEVERITY CRITICAL
--#TIMEINDEX 136
--#STATE FAILED
::= 136004
-- Following are the traps defined for StorageCell Events
-- The trap name is constructed from 2 of the 4 numbers that uniquely Identify
-- a SC Event: Software Component ID, and the Event Number.
-- These numbers are represented as hex numbers in the controller event parse file.
-- For example: sCellEventTrap966 has:
-- Software Component ID: 9 (hex)
-- Event Number: 66 (hex) { = 102 base 10 }
--
--
-- The Trap number is calculated by using the complete number space
-- of the Software Component & Event numbers. There are a possible
-- 256 s/w components, each with a possible 256 events giving an
-- address space of 65536 events. To ensure that trap numbers do not
-- change when additional SC Events are defined the following formula
-- is used: Base + (SWCID * 256) + Event Number
-- The large base was used to avoid collisions with the management trap
-- numbers who share the same address space of 0-65536
-- In our example above: sCellEventTrap966 the trap number is -
-- Base = 13600000 (which preserves our unique OID sub-identifier of 136) +
-- ( 9 * 256 ) + 102 (66hex) = 13602406
sCellEventTrap10 TRAP-TYPE -- CAC Code: 0
ENTERPRISE compaq
VARIABLES { scellNameDateTime,
scellSWComponent,
scellECode,
scellCAC,
scellEIP}
DESCRIPTION
"Severity: Normal -- informational in nature. During Executive Services initialization the system time value was set to the value contained in the time field. The action field contains one of the following codes which describes the condition that caused the time value to be chosen:
- 0 = TOY clock unavailable; time reset to default date and time.
- 1 = TOY clock time value was less than or equal to the last known time value previously stored in nonvolatile memory; time reset to default date and time.
- 2 = EDC was bad for last known time value previously stored in nonvolatile memory; time reset to default date and time.
- 3 = TOY clock not running; time reset to default date and time.
- 4 = TOY clock time value believed to be accurate; time set to TOY clock time value.
"
--#TYPE "StorageCell Event"
--#SUMMARY "SCellName-TimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."
--#ARGUMENTS {0,1,2,3,4,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
--#STATE WARNING
::= 13600256
sCellEventTrap11 TRAP-TYPE -- CAC Code: 0
ENTERPRISE compaq
VARIABLES { scellNameDateTime,
scellSWComponent,
scellECode,
scellCAC,
scellEIP}
DESCRIPTION
"Severity: Normal -- informational in nature. The system time value was set to the value contained in the time field by a call to the EXEC$SETTIME service. As part of setting the time in a dual HSV110 controller configuration, the times are synchronized. The action field contains one of the following codes which describes the action taken: - 0 = The time was set to the time value on this HSV110 controller.
- 1 = The master HSV110 controller requested the slave HSV110 controller to set its time to the time value.
- 2 = The slave HSV110 controller set the local time to the time value.
- 3 = The HSV110 controller's TOY clock was set to the time value.
"
--#TYPE "StorageCell Event"
--#SUMMARY "SCellName-TimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."
--#ARGUMENTS {0,1,2,3,4,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
--#STATE WARNING
::= 13600257
sCellEventTrap30 TRAP-TYPE -- CAC Code: 0
ENTERPRISE compaq
VARIABLES { scellNameDateTime,
scellSWComponent,
scellECode,
scellCAC,
scellEIP}
DESCRIPTION
"Severity: Normal -- informational in nature. The HSV110 controller identified in the nodeName field has failed in communicating with the Cabinet (Rack) Bus Interface Controller."
--#TYPE "StorageCell Event"
--#SUMMARY "SCellName-TimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."
--#ARGUMENTS {0,1,2,3,4,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
--#STATE WARNING
::= 13600768
sCellEventTrap31 TRAP-TYPE -- CAC Code: 40
ENTERPRISE compaq
VARIABLES { scellNameDateTime,
scellSWComponent,
scellECode,
scellCAC,
scellEIP}
DESCRIPTION
"Severity: Critical -- failure or failure imminent. The physical disk drive identified by the device field has been rendered inoperable. - If the flags.quorumDisk flag is nonzero, the physical disk drive is the Storage System Quorum disk identified in the quorumSequence field.
- If the flags.inqState flag is nonzero, the content of the inqData and capacity fields is valid.
- If the rssFlags.memberAbnormal flag is nonzero, the content of the memberState field is valid.
The rackNum field will not be valid until a future release. The reasonCode field contains a code giving the reason the physical disk drive has been rendered inoperable:
- 0x001 = CS IO failure
- 0x002 = Scrubber IO failure
- 0x003 = Attempt to set CBIT on normal drive
- 0x004 = Attempt to set CBIT on merging drive
- 0x100 = The Target Discovery Service Descriptor retry count has been exceeded
- 0x101 = Inoperable for Bad Block Replacement
- 0x102 = The soft error count has been exceeded
- 0x103 = The number of exchange timeouts permitted was exceeded
- 0x104 = Communication with drive has failed an excessive number of times
- 0x105 = The number of retries has been exceeded
- 0x106 = Medium/Hardware Errors encountered on this physical disk drive
- 0x107 = The number of Directed LIP's has surpassed the threshold
- 0x200 = Smart event from a physical disk drive not in Storage System
- 0x201 = Smart event from a physical disk drive not a Volume
- 0x202 = Smart event from a physical disk drive not a RSS
- 0x203 = Failure predicted from physical disk drive
- 0x204 = Can't read from physical disk drive from the poll
- 0x205 = Failure predicted from physical disk drive while deleting Disk Group
- 0x206 = physical disk drive forced inoperative from maintenance command for temporary POID
- 0x207 = physical disk drive forced inoperative from maintenance command for POID
- 0x208 = Bad block recovery failed or can't read FPAB
- 0x209 = Failure to remove volume from Storage System
- 0x20A = Failure to update metadata
"
--#TYPE "StorageCell Event"
--#SUMMARY "SCellName-TimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."
--#ARGUMENTS {0,1,2,3,4,}
--#SEVERITY CRITICAL
--#TIMEINDEX 136
--#STATE WARNING
::= 13600769
sCellEventTrap32 TRAP-TYPE -- CAC Code: 4f
ENTERPRISE compaq
VARIABLES { scellNameDateTime,
scellSWComponent,
scellECode,
scellCAC,
scellEIP}
DESCRIPTION
"Severity: Warning -- not failed but attention recommended or required. A physical disk drive will not be used because the maximum number of physical disk drives already exist in the current Storage System. The affected physical disk drive is identified in the device field. The Fibre Channel port used to communicate with the physical disk drive is contained in the cerpId field. The HSV110 controller internal Fibre Channel port number used to communicate with the physical disk drive is contained in the port field. The location of the physical disk drive is contained in the rackNum, denclNum, and bay fields. Note that the content of the rackNum field will not be valid until a future release. Note also that in this case the content of the reasonCode, flags, rssFlags, inqData, quorumSequence, capacity, and memberState fields is undefined."
--#TYPE "StorageCell Event"
--#SUMMARY "SCellName-TimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."
--#ARGUMENTS {0,1,2,3,4,}
--#SEVERITY MINOR
--#TIMEINDEX 136
--#STATE WARNING
::= 13600770
sCellEventTrap33 TRAP-TYPE -- CAC Code: 0
ENTERPRISE compaq
VARIABLES { scellNameDateTime,
scellSWComponent,
scellECode,
scellCAC,
scellEIP}
DESCRIPTION
"Severity: Normal -- informational in nature. A HSV110 controller has begun booting. That controller is identified in the nodeName field. Note that in this case the content of the scellTag field is undefined."
--#TYPE "StorageCell Event"
--#SUMMARY "SCellName-TimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."
--#ARGUMENTS {0,1,2,3,4,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
--#STATE WARNING
::= 13600771
sCellEventTrap34 TRAP-TYPE -- CAC Code: 0
ENTERPRISE compaq
VARIABLES { scellNameDateTime,
scellSWComponent,
scellECode,
scellCAC,
scellEIP}
DESCRIPTION
"Severity: Normal -- informational in nature. The HSV110 controller identified in the nodeName field has finished the process of bringing the Storage System, identified in the scellTag field, online."
--#TYPE "StorageCell Event"
--#SUMMARY "SCellName-TimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."
--#ARGUMENTS {0,1,2,3,4,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
--#STATE WARNING
::= 13600772
sCellEventTrap35 TRAP-TYPE -- CAC Code: 0
ENTERPRISE compaq
VARIABLES { scellNameDateTime,
scellSWComponent,
scellECode,
scellCAC,
scellEIP}
DESCRIPTION
"Severity: Normal -- informational in nature. The HSV110 controller identified in the nodeName field has been joined into the Storage System."
--#TYPE "StorageCell Event"
--#SUMMARY "SCellName-TimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."
--#ARGUMENTS {0,1,2,3,4,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
--#STATE WARNING
::= 13600773
sCellEventTrap36 TRAP-TYPE -- CAC Code: 0
ENTERPRISE compaq
VARIABLES { scellNameDateTime,
scellSWComponent,
scellECode,
scellCAC,
scellEIP}
DESCRIPTION
"Severity: Normal -- informational in nature. The HSV110 controller identified in the nodeName field has been ousted from the Storage System identified in the scellTag field."
--#TYPE "StorageCell Event"
--#SUMMARY "SCellName-TimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."
--#ARGUMENTS {0,1,2,3,4,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
--#STATE WARNING
::= 13600774
sCellEventTrap37 TRAP-TYPE -- CAC Code: 0
ENTERPRISE compaq
VARIABLES { scellNameDateTime,
scellSWComponent,
scellECode,
scellCAC,
scellEIP}
DESCRIPTION
"Severity: Normal -- informational in nature. The HSV110 controller identified in the nodeName field is now the Storage System, identified in the scellTag field, master."
--#TYPE "StorageCell Event"
--#SUMMARY "SCellName-TimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."
--#ARGUMENTS {0,1,2,3,4,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
--#STATE WARNING
::= 13600775
sCellEventTrap38 TRAP-TYPE -- CAC Code: 0
ENTERPRISE compaq
VARIABLES { scellNameDateTime,
scellSWComponent,
scellECode,
scellCAC,
scellEIP}
DESCRIPTION
"Severity: Normal -- informational in nature. The HSV110 controller identified in the nodeName field has been brought into the Storage System identified in the scellTag field."
--#TYPE "StorageCell Event"
--#SUMMARY "SCellName-TimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."
--#ARGUMENTS {0,1,2,3,4,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
--#STATE WARNING
::= 13600776
sCellEventTrap40 TRAP-TYPE -- CAC Code: 3
ENTERPRISE compaq
VARIABLES { scellNameDateTime,
scellSWComponent,
scellECode,
scellCAC,
scellEIP}
DESCRIPTION
"Severity: Undetermined -- more information needed to determine severity. HSV110 controller operation was terminated due to an unrecoverable event detected by either software or hardware or due to an action initiated via the Storage System Management Interface."
--#TYPE "StorageCell Event"
--#SUMMARY "SCellName-TimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."
--#ARGUMENTS {0,1,2,3,4,}
--#SEVERITY CRITICAL
--#TIMEINDEX 136
--#STATE WARNING
::= 13601024
sCellEventTrap41 TRAP-TYPE -- CAC Code: 3
ENTERPRISE compaq
VARIABLES { scellNameDateTime,
scellSWComponent,
scellECode,
scellCAC,
scellEIP}
DESCRIPTION
"Severity: Undetermined -- more information needed to determine severity. An HSV110 controller has sent a last gasp message prior to terminating operation. The terminated HSV110 controller is identified in the lter.terminatingCtrlr field. The lter.terminationEvent.u.value field contains the termination cause (i.e., termination code). The lter.terminationEvent.terminationLocation field contains the termination location. The lter.terminationTime field contains the termination date and time. The lter.seq field contains the index of the HSV110 controller's Last Termination Event Array element assigned to the termination event. The lter.swVersion, lter.baselevelId, and lter.ctrlrModelId fields identify the software level and controller model information. The lter.uptime field contains a value that represents the number of seconds the HSV110 controller has executed functional code since its first power up. Note that the reportingCtrlr header field identifies the HSV110 controller that received the last gasp message. All other header fields reflect information supplied by the terminating controller."
--#TYPE "StorageCell Event"
--#SUMMARY "SCellName-TimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."
--#ARGUMENTS {0,1,2,3,4,}
--#SEVERITY CRITICAL
--#TIMEINDEX 136
--#STATE WARNING
::= 13601025
sCellEventTrap42 TRAP-TYPE -- CAC Code: 1
ENTERPRISE compaq
VARIABLES { scellNameDateTime,
scellSWComponent,
scellECode,
scellCAC,
scellEIP}
DESCRIPTION
"Severity: Critical -- failure or failure imminent. A machine check occurred while a termination event was being processed. The post-termination operation being performed at the time the event occurred can be derived from the lter.reueaIndex field. Note: The lteihd and lter fields may not describe the event that caused the HSV110 controller to terminate operation depending on how far termination processing got before the machine check occurred."
--#TYPE "StorageCell Event"
--#SUMMARY "SCellName-TimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."
--#ARGUMENTS {0,1,2,3,4,}
--#SEVERITY CRITICAL
--#TIMEINDEX 136
--#STATE WARNING
::= 13601026
sCellEventTrap43 TRAP-TYPE -- CAC Code: 1
ENTERPRISE compaq
VARIABLES { scellNameDateTime,
scellSWComponent,
scellECode,
scellCAC,
scellEIP}
DESCRIPTION
"Severity: Critical -- failure or failure imminent. An unexpected event occurred while a termination event was being processed. The value contained in the uei.type field describes the event as follows: - 0 = Unrecognized Unexpected Event code.
- 1 = Power failure before initialization could complete.
- 2 = Recursive termination before initialization could complete.
- 3 = Terminated during the first part post-termination preparation.
- 4 = Terminated during the load of the G3 Glue registers.
- 5 = Terminated during the second part post-termination preparation.
- 6 = Terminated during event report block load.
- 7 = Terminated during initialization of all hardware components and software data structures in preparation for restart.
- 8 = Terminated during execution of an unrecognized post-termination operation (premature).
- 9 = Power failure during execution of a post-termination operation.
- A = No good entries found in Termination Event Array. (Note that this condition is expected following the first boot of a newly manufactured HSV110 controller. In that case this event can be safely ignored; no action is necessary.)
- B = The EDC of one or more Termination Event Array entries is bad.
- C = Termination Event Array entry control block revision is different.
- D = Termination Event Array entry information block revision is different.
- E = Termination Event Array entry up time value is greater than the system's up time value.
- F = Termination Event Array entry up time value is less than the previous entry's up time value.
- 10= Termination Event Array entry sequence number value is less than the previous entry's sequence number value.
- 11= Detected an unrecognized dump/restart control code.
- 12= Failed to terminate the entity dump loop.
- 13= Unexpected dump entity size.
- 14= Unexpected Event Log Packet processing stage code.
- 15= Number of Termination Parameters supplied not equal to maximum allowed as required.
The post-termination operation being performed at the time the unexpected event occurred is contained in the uei.pto field. Note: The lteihd and lter fields may not describe the event that caused the HSV110 controller to terminate operation depending on how far termination processing got before the unexpected event occurred."
--#TYPE "StorageCell Event"
--#SUMMARY "SCellName-TimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."
--#ARGUMENTS {0,1,2,3,4,}
--#SEVERITY CRITICAL
--#TIMEINDEX 136
--#STATE WARNING
::= 13601027
sCellEventTrap44 TRAP-TYPE -- CAC Code: 0
ENTERPRISE compaq
VARIABLES { scellNameDateTime,
scellSWComponent,
scellECode,
scellCAC,
scellEIP}
DESCRIPTION
"Severity: Normal -- informational in nature. The Storage System Event Log validation completed successfully. The content of the cinfo.scelcbi.status field, the cinfo.scelcbi structure, and the minfo.scelmi structure show the validated state of the Storage System Event Log. The meaning of the status value contained in the cinfo.scelcbi.status field is as follows:
Note: The content of the ainfo fields, cinfo.sctelcbi structure, and minfo.sctelmi structure is undefined."
--#TYPE "StorageCell Event"
--#SUMMARY "SCellName-TimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."
--#ARGUMENTS {0,1,2,3,4,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
--#STATE WARNING
::= 13601028
sCellEventTrap45 TRAP-TYPE -- CAC Code: 0
ENTERPRISE compaq
VARIABLES { scellNameDateTime,
scellSWComponent,
scellECode,
scellCAC,
scellEIP}
DESCRIPTION
"Severity: Normal -- informational in nature. The Storage System Event Log validation failed. The content of the cinfo.scelcbi.status field, the cinfo.scelcbi structure, and the minfo.scelmi structure show the state of the Storage System Event Log at the time of the failure. The content and state of the Storage System Event Log have been initialized to their initial operational settings. The meaning of the status value contained in the cinfo.scelcbi.status field is as follows:
- 1 = Cookie value is not as expected.
- 2 = Event data overflows the buffer.
- 3 = Event data size is not a multiple of 4 bytes, is less than the minimum, or is greater than the maximum.
- 4 = Event Information Packet type is greater than the maximum.
- 5 = Event information size is not a multiple of 4 bytes, is less than the minimum, is greater than the maximum, doesn't match the Event Information Packet type size, or when combined with the entry header size doesn't equal the entry size.
- 6 = Event code is zero.
- 7 = Event is out of sequence.
- 8 = Dead space area at the end of a partially packed buffer contains a nonzero value.
- 9 = An event data block containing a nonzero value was found after end of event data was detected.
- A = Sequence number reset flag not set as expected.
- B = The event log contains no entries.
- C = Event data block read failed during maintenance verification.
- D = Event data block read failed during maintenance completion.
- E = Event data block erase failed during maintenance completion.
- F = Control block read failed during maintenance verification.
- 17= The event log was destroyed and prepared for re-initialization.
Note: The content of the ainfo fields, cinfo.sctelcbi structure, and minfo.sctelmi structure is undefined."
--#TYPE "StorageCell Event"
--#SUMMARY "SCellName-TimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."
--#ARGUMENTS {0,1,2,3,4,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
--#STATE WARNING
::= 13601029
sCellEventTrap46 TRAP-TYPE -- CAC Code: 1
ENTERPRISE compaq
VARIABLES { scellNameDateTime,
scellSWComponent,
scellECode,
scellCAC,
scellEIP}
DESCRIPTION
"Severity: Critical -- failure or failure imminent. Event reports were lost due to an insufficient supply of Event Log Packets on the HSV110 controller that is the Storage System Master. The ainfo.eventsNotReported field shows the number of event reports lost. Note: The content of the ainfo.quiesceType field, ainfo.remoteEvent field cinfo.sctelcbi structure, and minfo.sctelmi structure is undefined."
--#TYPE "StorageCell Event"
--#SUMMARY "SCellName-TimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."
--#ARGUMENTS {0,1,2,3,4,}
--#SEVERITY CRITICAL
--#TIMEINDEX 136
--#STATE WARNING
::= 13601030
sCellEventTrap47 TRAP-TYPE -- CAC Code: 1
ENTERPRISE compaq
VARIABLES { scellNameDateTime,
scellSWComponent,
scellECode,
scellCAC,
scellEIP}
DESCRIPTION
"Severity: Critical -- failure or failure imminent. Event reports were lost due to an insufficient supply of Event Log Packets on the HSV110 controller that is not the Storage System Master. The ainfo.eventsNotReported field shows the number of event reports lost. Note: The content of the ainfo.quiesceType field, ainfo.remoteEvent field cinfo.sctelcbi structure, and minfo.sctelmi structure is undefined."
--#TYPE "StorageCell Event"
--#SUMMARY "SCellName-TimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."
--#ARGUMENTS {0,1,2,3,4,}
--#SEVERITY CRITICAL
--#TIMEINDEX 136
--#STATE WARNING
::= 13601031
sCellEventTrap48 TRAP-TYPE -- CAC Code: 0
ENTERPRISE compaq
VARIABLES { scellNameDateTime,
scellSWComponent,
scellECode,
scellCAC,
scellEIP}
DESCRIPTION
"Severity: Normal -- informational in nature. The Storage System Termination Event Log has become inaccessible. The content of the cinfo.sctelcbi.status field, the cinfo.sctelcbi structure, and the minfo.sctelmi structure show the current state of the Storage System Termination Event Log. The meaning of the status value contained in the cinfo.sctelcbi.status field is as follows:
- F = Control block read failed during maintenance verification.
- 10= Control block write failed during maintenance verification.
- 11= Event data block write failed during maintenance update.
- 12= Control block write failed during maintenance completion.
- 13= Storage System Termination Event Log related send was unsuccessful or the master found that the Storage System Termination Event Log is inaccessible.
- 16= Event data block read failed during retrieval request.
Note: The content of the ainfo fields, cinfo.scelcbi structure, and minfo.scelmi structure is undefined."
--#TYPE "StorageCell Event"
--#SUMMARY "SCellName-TimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."
--#ARGUMENTS {0,1,2,3,4,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
--#STATE WARNING
::= 13601032
sCellEventTrap49 TRAP-TYPE -- CAC Code: 0
ENTERPRISE compaq
VARIABLES { scellNameDateTime,
scellSWComponent,
scellECode,
scellCAC,
scellEIP}
DESCRIPTION
"Severity: Normal -- informational in nature. The Storage System Termination Event Log validation completed successfully. The content of the cinfo.sctelcbi.status field, the cinfo.sctelcbi structure, and the minfo.sctelmi structure show the validated state of the Storage System Termination Event Log. The meaning of the status value contained in the cinfo.sctelcbi.status field is as follows:
Note: The content of the ainfo fields, cinfo.scelcbi structure, and minfo.scelmi structure is undefined."
--#TYPE "StorageCell Event"
--#SUMMARY "SCellName-TimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."
--#ARGUMENTS {0,1,2,3,4,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
--#STATE WARNING
::= 13601033
sCellEventTrap4A TRAP-TYPE -- CAC Code: 0
ENTERPRISE compaq
VARIABLES { scellNameDateTime,
scellSWComponent,
scellECode,
scellCAC,
scellEIP}
DESCRIPTION
"Severity: Normal -- informational in nature. The Storage System Termination Event Log validation failed. The content of the cinfo.sctelcbi.status field, the cinfo.sctelcbi structure, and the minfo.sctelmi structure show the state of the Storage System Termination Event Log at the time of the failure. The meaning of the status value contained in the cinfo.sctelcbi.status field is as follows:
- F = Control block read failed during maintenance verification.
- 10= Control block write failed during maintenance verification.
- 11= Event data block write failed during maintenance update.
- 12= Control block write failed during maintenance completion.
- 13= Storage System Termination Event Log related send was unsuccessful or the master found that the Storage System Termination Event Log is inaccessible.
- 16= Event data block read failed during retrieval request.
- 17= The log was destroyed and prepared for re-initialization.
Note: The content of the ainfo fields, cinfo.scelcbi structure, and minfo.scelmi structure is undefined."
--#TYPE "StorageCell Event"
--#SUMMARY "SCellName-TimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."
--#ARGUMENTS {0,1,2,3,4,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
--#STATE WARNING
::= 13601034
sCellEventTrap4B TRAP-TYPE -- CAC Code: 0
ENTERPRISE compaq
VARIABLES { scellNameDateTime,
scellSWComponent,
scellECode,
scellCAC,
scellEIP}
DESCRIPTION
"Severity: Normal -- informational in nature. The Storage System Termination Event Log has been updated with the termination event information obtained from the HSV110 controller that is not the Storage System Master. The content of the cinfo.sctelcbi.status field, the cinfo.sctelcbi structure, and the minfo.sctelmi structure show the updated state of the Storage System Termination Event Log. The meaning of the status value contained in the cinfo.sctelcbi.status field is as follows:
Note: The content of the ainfo fields, cinfo.scelcbi structure, and minfo.scelmi structure is undefined."
--#TYPE "StorageCell Event"
--#SUMMARY "SCellName-TimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."
--#ARGUMENTS {0,1,2,3,4,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
--#STATE WARNING
::= 13601035
sCellEventTrap4C TRAP-TYPE -- CAC Code: 1
ENTERPRISE compaq
VARIABLES { scellNameDateTime,
scellSWComponent,
scellECode,
scellCAC,
scellEIP}
DESCRIPTION
"Severity: Critical -- failure or failure imminent. The Fault Manager on the Storage System Master received an invalid Event Information Packet from the remote Fault Manager. The header information from the invalid Event Information Packet is contained in the ainfo.remoteEvent field. Note: The content of the ainfo.quiesceType field, ainfo.eventsNotReported field, cinfo.scelcbi structure, cinfo.sctelcbi structure, minfo.scelmi structure, and minfo.sctelmi structure is undefined."
--#TYPE "StorageCell Event"
--#SUMMARY "SCellName-TimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."
--#ARGUMENTS {0,1,2,3,4,}
--#SEVERITY CRITICAL
--#TIMEINDEX 136
--#STATE WARNING
::= 13601036
sCellEventTrap4D TRAP-TYPE -- CAC Code: 0
ENTERPRISE compaq
VARIABLES { scellNameDateTime,
scellSWComponent,
scellECode,
scellCAC,
scellEIP}
DESCRIPTION
"Severity: Normal -- informational in nature. The Fault Manager operation was made quiescent. If the ainfo.quiesceType field is equal to 0, the operation was performed on both HSV110 controllers. If the ainfo.quiesceType field is equal to 1, the operation was performed only on the HSV110 controller that is not the Storage System Master. Note: The content of the ainfo.eventsNotReported field, cinfo.scelcbi structure, cinfo.sctelcbi structure, minfo.scelmi structure, and minfo.sctelmi structure is undefined."
--#TYPE "StorageCell Event"
--#SUMMARY "SCellName-TimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."
--#ARGUMENTS {0,1,2,3,4,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
--#STATE WARNING
::= 13601037
sCellEventTrap4E TRAP-TYPE -- CAC Code: 3
ENTERPRISE compaq
VARIABLES { scellNameDateTime,
scellSWComponent,
scellECode,
scellCAC,
scellEIP}
DESCRIPTION
"Severity: Undetermined -- more information needed to determine severity. An HSV110 controller sent a last gasp message prior to terminating operation with an indication that the HSV110 controller identified in the lter.terminatingCtrlr field should also terminate operation."
--#TYPE "StorageCell Event"
--#SUMMARY "SCellName-TimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."
--#ARGUMENTS {0,1,2,3,4,}
--#SEVERITY CRITICAL
--#TIMEINDEX 136
--#STATE WARNING
::= 13601038
sCellEventTrap4F TRAP-TYPE -- CAC Code: 0
ENTERPRISE compaq
VARIABLES { scellNameDateTime,
scellSWComponent,
scellECode,
scellCAC,
scellEIP}
DESCRIPTION
"Severity: Normal -- informational in nature. This HSV110 controller sent its termination event information to the HSV110 controller that is the Storage System Master. The content of the cinfo.sctelcbi.status field, the cinfo.sctelcbi structure, and the minfo.sctelmi structure show the updated state of the Storage System Termination Event Log. The meaning of the status value contained in the cinfo.sctelcbi.status field is as follows:
Note: The content of the ainfo fields, cinfo.scelcbi structure, and minfo.scelmi structure is undefined."
--#TYPE "StorageCell Event"
--#SUMMARY "SCellName-TimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."
--#ARGUMENTS {0,1,2,3,4,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
--#STATE WARNING
::= 13601039
sCellEventTrap410 TRAP-TYPE -- CAC Code: 1
ENTERPRISE compaq
VARIABLES { scellNameDateTime,
scellSWComponent,
scellECode,
scellCAC,
scellEIP}
DESCRIPTION
"Severity: Critical -- failure or failure imminent. Event reports were lost due to an insufficient supply of ISR Event Log Packets on the HSV110 controller that is the Storage System Master. The ainfo.eventsNotReported field shows the number of event reports lost. Note: The content of the ainfo.quiesceType field, ainfo.remoteEvent field cinfo.sctelcbi structure, and minfo.sctelmi structure is undefined."
--#TYPE "StorageCell Event"
--#SUMMARY "SCellName-TimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."
--#ARGUMENTS {0,1,2,3,4,}
--#SEVERITY CRITICAL
--#TIMEINDEX 136
--#STATE WARNING
::= 13601040
sCellEventTrap411 TRAP-TYPE -- CAC Code: 1
ENTERPRISE compaq
VARIABLES { scellNameDateTime,
scellSWComponent,
scellECode,
scellCAC,
scellEIP}
DESCRIPTION
"Severity: Critical -- failure or failure imminent. Event reports were lost due to an insufficient supply of ISR Event Log Packets on the HSV110 controller that is not the Storage System Master. The ainfo.eventsNotReported field shows the number of event reports lost. Note: The content of the ainfo.quiesceType field, ainfo.remoteEvent field cinfo.sctelcbi structure, and minfo.sctelmi structure is undefined."
--#TYPE "StorageCell Event"
--#SUMMARY "SCellName-TimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."
--#ARGUMENTS {0,1,2,3,4,}
--#SEVERITY CRITICAL
--#TIMEINDEX 136
--#STATE WARNING
::= 13601041
sCellEventTrap60 TRAP-TYPE -- CAC Code: 40
ENTERPRISE compaq
VARIABLES { scellNameDateTime,
scellSWComponent,
scellECode,
scellCAC,
scellEIP}
DESCRIPTION
"Severity: Critical -- failure or failure imminent. A physical disk drive has reported that it has exceeded its failure prediction threshold. The identity of the physical disk drive is contained in the device field. The Fibre Channel port used to communicate with the physical disk drive is contained in the cerpId field. The HSV110 controller internal Fibre Channel port number used to communicate with the physical disk drive is contained in the port field. The arbitrated loop physical address of the physical disk drive is contained in the alPa field. The location of the physical disk drive is determined by the content of the denclNum field as follows:
- If denclNum is less than 99, the location is as indicated by the content of the rackNum, denclNum, and bay fields.
- If denclNum is equal to 99, the location is unknown. Note that the content of the rackNum and bay fields is undefined in this case.
- If denclNum is greater than 99, the HSV110 controller does not have proof of the current location but the last known location is indicated by the content of the rackNum, denclNum, and bay fields. Subtract 100 from the content of those fields to determine the actual last known location. If there have been no configuration changes, the last known location values will be accurate. The identity contained in the device field should be used to confirm the last known location values.
Note that the content of the rackNum field will not be valid until a future release. The Fibre Channel Exchange Descriptor class is contained in the fedClass field. The command issued to the physical disk drive is contained in the cmd field. The sense data obtained from the physical disk drive as a result of the failure prediction threshold exceeded error is contained in the error field. The enclosures array shows the drive enclosures available on the Fibre Channel port identified in the cerpId field. The location of an available drive enclosure is determined by the content of the enclosures.denclNum field as follows: - If enclosures.denclNum is less than 99, the location is as indicated by the content of the enclosures.rackNum and enclosures.denclNum fields.
- If enclosures.denclNum is equal to 99, the enclosures array entry is not used. Note that the content of the enclosures.rackNum field is undefined in this case.
- If enclosures.denclNum is greater than 99, the HSV110 controller does not have proof of the current location but the last known location is indicated by the content of the enclosures.rackNum and enclosures.denclNum fields. Subtract 100 from the content of those fields to determine the actual last known location. If there have been no configuration changes, the last known location values will be accurate.
Note that the content of the enclosures.rackNum field will not be valid until a future release."
--#TYPE "StorageCell Event"
--#SUMMARY "SCellName-TimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."
--#ARGUMENTS {0,1,2,3,4,}
--#SEVERITY CRITICAL
--#TIMEINDEX 136
--#STATE WARNING
::= 13601536
sCellEventTrap61 TRAP-TYPE -- CAC Code: 4a
ENTERPRISE compaq
VARIABLES { scellNameDateTime,
scellSWComponent,
scellECode,
scellCAC,
scellEIP}
DESCRIPTION
"Severity: Warning -- not failed but attention recommended or required. A Fibre Channel port on the HSV110 controller has failed to respond. The identity of the affected Fibre Channel port is contained in the cerpId field. The HSV110 controller internal Fibre Channel port number of the affected Fibre Channel port is contained in the port field. The peb array contains the port event block information. The peqFrzProdIndex field contains the index to the port event block in use when the Tachyon chip entered the frozen state. The peqProdIndex field contains the index to the next port event block. The peqConsIndex field contains the index to the next port event block to be acted upon. The failureCause field contains the internal routing value as follows: - 1 - Excessive exchange timeouts on loop
- 2 - Excessive link errors on loop
- 3 - Exhausted Link Down retries on loop with signal
- 4 - Exhausted Link Down retries on loop with loss of signal
- 5 - Excessive link inits on loop without completing device discovery
"
--#TYPE "StorageCell Event"
--#SUMMARY "SCellName-TimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."
--#ARGUMENTS {0,1,2,3,4,}
--#SEVERITY MINOR
--#TIMEINDEX 136
--#STATE WARNING
::= 13601537
sCellEventTrap62 TRAP-TYPE -- CAC Code: 0
ENTERPRISE compaq
VARIABLES { scellNameDateTime,
scellSWComponent,
scellECode,
scellCAC,
scellEIP}
DESCRIPTION
"Severity: Normal -- informational in nature. A physical disk drive has reported a check condition error. The identity of the physical disk drive is contained in the device field. The Fibre Channel port used to communicate with the physical disk drive is contained in the cerpId field. The HSV110 controller internal Fibre Channel port number used to communicate with the physical disk drive is contained in the port field. The arbitrated loop physical address of the physical disk drive is contained in the alPa field. The location of the physical disk drive is determined by the content of the denclNum field as follows: - If denclNum is less than 99, the location is as indicated by the content of the rackNum, denclNum, and bay fields.
- If denclNum is equal to 99, the location is unknown. Note that the content of the rackNum and bay fields is undefined in this case.
- If denclNum is greater than 99, the HSV110 controller does not have proof of the current location but the last known location is indicated by the content of the rackNum, denclNum, and bay fields. Subtract 100 from the content of those fields to determine the actual last known location. If there have been no configuration changes, the last known location values will be accurate. The identity contained in the device field should be used to confirm the last known location values.
Note that the content of the rackNum field will not be valid until a future release. The Fibre Channel Exchange Descriptor class is contained in the fedClass field. The command issued to the physical disk drive is contained in the cmd field. The sense data obtained from the physical disk drive as a result of the check condition error is contained in the error field. The enclosures array shows the drive enclosures available on the Fibre Channel port identified in the cerpId field. The location of an available drive enclosure is determined by the content of the enclosures.denclNum field as follows: - If enclosures.denclNum is less than 99, the location is as indicated by the content of the enclosures.rackNum and enclosures.denclNum fields.
- If enclosures.denclNum is equal to 99, the enclosures array entry is not used. Note that the content of the enclosures.rackNum field is undefined in this case.
- If enclosures.denclNum is greater than 99, the HSV110 controller does not have proof of the current location but the last known location is indicated by the content of the enclosures.rackNum and enclosures.denclNum fields. Subtract 100 from the content of those fields to determine the actual last known location. If there have been no configuration changes, the last known location values will be accurate.
Note that the content of the enclosures.rackNum field will not be valid until a future release."
--#TYPE "StorageCell Event"
--#SUMMARY "SCellName-TimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."
--#ARGUMENTS {0,1,2,3,4,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
--#STATE WARNING
::= 13601538
sCellEventTrap63 TRAP-TYPE -- CAC Code: 47
ENTERPRISE compaq
VARIABLES { scellNameDateTime,
scellSWComponent,
scellECode,
scellCAC,
scellEIP}
DESCRIPTION
"Severity: Warning -- not failed but attention recommended or required. An exchange sent to a physical disk drive or another HSV110 controller via the mirror port or a Fibre Channel port has timed out. The identity of the intended recipient is contained in the device field. The Fibre Channel port over which the frame was sent is identified in the cerpId field. The HSV110 controller internal Fibre Channel port number over which the frame was sent is contained in the port field. The arbitrated loop physical address of the intended recipient is contained in the alPa field. The missingPort and missingCerpId fields are unused. The location of the intended recipient is determined by the content of the denclNum field as follows: - If denclNum is less than 99, the location is as indicated by the content of the rackNum, denclNum, and bay fields.
- If denclNum is equal to 99, the location is unknown. Note that the content of the rackNum and bay fields is undefined in this case.
- If denclNum is greater than 99, the HSV110 controller does not have proof of the current location but the last known location is indicated by the content of the rackNum, denclNum, and bay fields. Subtract 100 from the content of those fields to determine the actual last known location. If there have been no configuration changes, the last known location values will be accurate. The identity contained in the device field should be used to confirm the last known location values.
Note that the content of the rackNum field will not be valid until a future release. The number of timeouts detected is contained in the numTimes field. The enclosures array shows the drive enclosures available on the Fibre Channel port identified in the cerpId field. The location of an available drive enclosure is determined by the content of the enclosures.denclNum field as follows: - If enclosures.denclNum is less than 99, the location is as indicated by the content of the enclosures.rackNum and enclosures.denclNum fields.
- If enclosures.denclNum is equal to 99, the enclosures array entry is not used. Note that the content of the enclosures.rackNum field is undefined in this case.
- If enclosures.denclNum is greater than 99, the HSV110 controller does not have proof of the current location but the last known location is indicated by the content of the enclosures.rackNum and enclosures.denclNum fields. Subtract 100 from the content of those fields to determine the actual last known location. If there have been no configuration changes, the last known location values will be accurate.
Note that the content of the enclosures.rackNum field will not be valid until a future release."
--#TYPE "StorageCell Event"
--#SUMMARY "SCellName-TimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."
--#ARGUMENTS {0,1,2,3,4,}
--#SEVERITY MINOR
--#TIMEINDEX 136
--#STATE WARNING
::= 13601539
sCellEventTrap64 TRAP-TYPE -- CAC Code: 48
ENTERPRISE compaq
VARIABLES { scellNameDateTime,
scellSWComponent,
scellECode,
scellCAC,
scellEIP}
DESCRIPTION
"Severity: Warning -- not failed but attention recommended or required. Work was unexpectedly sent to this HSV110 controller by a physical disk drive or another HSV110 controller. This HSV110 controller did not originate the work. The identity of the sender is contained in the device field. The Fibre Channel port over which the unexpected work was received is identified in the cerpId field. The HSV110 controller internal Fibre Channel port number over which the unexpected work was received is contained in the port field. The arbitrated loop physical address of the sender is contained in the alPa field. The location of the sender is determined by the content of the denclNum field as follows: - If denclNum is less than 99, the location is as indicated by the content of the rackNum, denclNum, and bay fields.
- If denclNum is equal to 99, the location is unknown. Note that the content of the rackNum and bay fields is undefined in this case.
- If denclNum is greater than 99, the HSV110 controller does not have proof of the current location but the last known location is indicated by the content of the rackNum, denclNum, and bay fields. Subtract 100 from the content of those fields to determine the actual last known location. If there have been no configuration changes, the last known location values will be accurate. The identity contained in the device field should be used to confirm the last known location values.
Note that the content of the rackNum field will not be valid until a future release. The hdrCdb field contains the command descriptor block and Fibre Channel header information associated with the unexpected work."
--#TYPE "StorageCell Event"
--#SUMMARY "SCellName-TimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."
--#ARGUMENTS {0,1,2,3,4,}
--#SEVERITY MINOR
--#TIMEINDEX 136
--#STATE WARNING
::= 13601540
sCellEventTrap65 TRAP-TYPE -- CAC Code: 49
ENTERPRISE compaq
VARIABLES { scellNameDateTime,
scellSWComponent,
scellECode,
scellCAC,
scellEIP}
DESCRIPTION
"Severity: Warning -- not failed but attention recommended or required. Work has been sent to a physical disk drive or another HSV110 controller via the mirror port but it did not respond. The identity of the intended target is contained in the device field. The Fibre Channel port over which the work was sent is identified in the cerpId field. The HSV110 controller internal Fibre Channel port over which the work was sent is contained in the port field. The arbitrated loop physical address of the intended target is contained in the alPa field. The location of the intended target is determined by the content of the denclNum field as follows: - If denclNum is less than 99, the location is as indicated by the content of the rackNum, denclNum, and bay fields.
- If denclNum is equal to 99, the location is unknown. Note that the content of the rackNum and bay fields is undefined in this case.
- If denclNum is greater than 99, the HSV110 controller does not have proof of the current location but the last known location is indicated by the content of the rackNum, denclNum, and bay fields. Subtract 100 from the content of those fields to determine the actual last known location. If there have been no configuration changes, the last known location values will be accurate. The identity contained in the device field should be used to confirm the last known location values.
Note that the content of the rackNum field will not be valid until a future release. The Fibre Channel Exchange Descriptor class is contained in the fedClass field. The command issued to the intended target is contained in the cmd field. Note that in this case the content of the error field is undefined. The enclosures array shows the drive enclosures available on the Fibre Channel port identified in the cerpId field. The location of an available drive enclosure is determined by the content of the enclosures.denclNum field as follows: - If enclosures.denclNum is less than 99, the location is as indicated by the content of the enclosures.rackNum and enclosures.denclNum fields.
- If enclosures.denclNum is equal to 99, the enclosures array entry is not used. Note that the content of the enclosures.rackNum field is undefined in this case.
- If enclosures.denclNum is greater than 99, the HSV110 controller does not have proof of the current location but the last known location is indicated by the content of the enclosures.rackNum and enclosures.denclNum fields. Subtract 100 from the content of those fields to determine the actual last known location. If there have been no configuration changes, the last known location values will be accurate.
Note that the content of the enclosures.rackNum field will not be valid until a future release."
--#TYPE "StorageCell Event"
--#SUMMARY "SCellName-TimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."
--#ARGUMENTS {0,1,2,3,4,}
--#SEVERITY MINOR
--#TIMEINDEX 136
--#STATE WARNING
::= 13601541
sCellEventTrap67 TRAP-TYPE -- CAC Code: 47
ENTERPRISE compaq
VARIABLES { scellNameDateTime,
scellSWComponent,
scellECode,
scellCAC,
scellEIP}
DESCRIPTION
"Severity: Warning -- not failed but attention recommended or required. A Target Discovery Service Descriptor exchange sent to a physical disk drive has timed out. The identity of the physical disk drive is contained in the device field. The Fibre Channel port used to communicate with the physical disk drive is contained in the cerpId field. The HSV110 controller internal Fibre Channel port number used to communicate with the physical disk drive is contained in the port field. The arbitrated loop physical address of the physical disk drive is contained in the alPa field. The location of the physical disk drive is determined by the content of the denclNum field as follows: - If denclNum is less than 99, the location is as indicated by the content of the rackNum, denclNum, and bay fields.
- If denclNum is equal to 99, the location is unknown. Note that the content of the rackNum and bay fields is undefined in this case.
- If denclNum is greater than 99, the HSV110 controller does not have proof of the current location but the last known location is indicated by the content of the rackNum, denclNum, and bay fields. Subtract 100 from the content of those fields to determine the actual last known location. If there have been no configuration changes, the last known location values will be accurate. The identity contained in the device field should be used to confirm the last known location values.
Note that the content of the rackNum field will not be valid until a future release. The Fibre Channel Exchange Descriptor class is contained in the fedClass field. The command issued to the physical disk drive is contained in the cmd field. Note that in this case the content of the error field is undefined. The enclosures array shows the drive enclosures available on the Fibre Channel port identified in the cerpId field. The location of an available drive enclosure is determined by the content of the enclosures.denclNum field as follows: - If enclosures.denclNum is less than 99, the location is as indicated by the content of the enclosures.rackNum and enclosures.denclNum fields.
- If enclosures.denclNum is equal to 99, the enclosures array entry is not used. Note that the content of the enclosures.rackNum field is undefined in this case.
- If enclosures.denclNum is greater than 99, the HSV110 controller does not have proof of the current location but the last known location is indicated by the content of the enclosures.rackNum and enclosures.denclNum fields. Subtract 100 from the content of those fields to determine the actual last known location. If there have been no configuration changes, the last known location values will be accurate.
Note that the content of the enclosures.rackNum field will not be valid until a future release."
--#TYPE "StorageCell Event"
--#SUMMARY "SCellName-TimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."
--#ARGUMENTS {0,1,2,3,4,}
--#SEVERITY MINOR
--#TIMEINDEX 136
--#STATE WARNING
::= 13601543
sCellEventTrap68 TRAP-TYPE -- CAC Code: 0
ENTERPRISE compaq
VARIABLES { scellNameDateTime,
scellSWComponent,
scellECode,
scellCAC,
scellEIP}
DESCRIPTION
"Severity: Normal -- informational in nature. An excessive number of link errors were detected on a HSV110 controller's Fibre Channel port. The identity of the affected Fibre Channel port is contained in the cerpId field. The HSV110 controller internal Fibre Channel port number of the affected Fibre Channel port is contained in the port field. This is an informational event triggered by the occurrence of an excessive number of Tachyon chip link status errors detected within a particular link status error type. The number of occurrences of each link status error type is contained in a separate type-specific field (e.g., lossOfSignal, badRxChar, etc.). The HSV110 controller checks each of its Fibre Channel port's for excessive link status errors periodically."
--#TYPE "StorageCell Event"
--#SUMMARY "SCellName-TimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."
--#ARGUMENTS {0,1,2,3,4,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
--#STATE WARNING
::= 13601544
sCellEventTrap69 TRAP-TYPE -- CAC Code: 40
ENTERPRISE compaq
VARIABLES { scellNameDateTime,
scellSWComponent,
scellECode,
scellCAC,
scellEIP}
DESCRIPTION
"Severity: Critical -- failure or failure imminent. A physical disk drive has reported numerous failure prediction threshold exceeded errors. The identity of the physical disk drive is contained in the device field. The Fibre Channel port used to communicate with the physical disk drive is contained in the cerpId field. The HSV110 controller internal Fibre Channel port number used to communicate with the physical disk drive is contained in the port field. The arbitrated loop physical address of the physical disk drive is contained in the alPa field. The missingPort and missingCerpId fields are unused. The location of the physical disk drive is determined by the content of the denclNum field as follows: - If denclNum is less than 99, the location is as indicated by the content of the rackNum, denclNum, and bay fields.
- If denclNum is equal to 99, the location is unknown. Note that the content of the rackNum and bay fields is undefined in this case.
- If denclNum is greater than 99, the HSV110 controller does not have proof of the current location but the last known location is indicated by the content of the rackNum, denclNum, and bay fields. Subtract 100 from the content of those fields to determine the actual last known location. If there have been no configuration changes, the last known location values will be accurate. The identity contained in the device field should be used to confirm the last known location values.
Note that the content of the rackNum field will not be valid until a future release. The Fibre Channel Exchange Descriptor class is contained in the fedClass field. The numTimes field is the number of failure prediction threshold exceeded errors reported by the physical disk drive in the previous minute. The enclosures array shows the drive enclosures available on the Fibre Channel port identified in the cerpId field. The location of an available drive enclosure is determined by the content of the enclosures.denclNum field as follows: - If enclosures.denclNum is less than 99, the location is as indicated by the content of the enclosures.rackNum and enclosures.denclNum fields.
- If enclosures.denclNum is equal to 99, the enclosures array entry is not used. Note that the content of the enclosures.rackNum field is undefined in this case.
- If enclosures.denclNum is greater than 99, the HSV110 controller does not have proof of the current location but the last known location is indicated by the content of the enclosures.rackNum and enclosures.denclNum fields. Subtract 100 from the content of those fields to determine the actual last known location. If there have been no configuration changes, the last known location values will be accurate.
Note that the content of the enclosures.rackNum field will not be valid until a future release."
--#TYPE "StorageCell Event"
--#SUMMARY "SCellName-TimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."
--#ARGUMENTS {0,1,2,3,4,}
--#SEVERITY CRITICAL
--#TIMEINDEX 136
--#STATE WARNING
::= 13601545
sCellEventTrap6A TRAP-TYPE -- CAC Code: 0
ENTERPRISE compaq
VARIABLES { scellNameDateTime,
scellSWComponent,
scellECode,
scellCAC,
scellEIP}
DESCRIPTION
"Severity: Normal -- informational in nature. A physical disk drive has reported numerous check condition errors. The identity of the physical disk drive is contained in the device field. The Fibre Channel port used to communicate with the physical disk drive is contained in the cerpId field. The HSV110 controller internal Fibre Channel port number used to communicate with the physical disk drive is contained in the port field. The arbitrated loop physical address of the physical disk drive is contained in the alPa field. The missingPort and missingCerpId fields are unused. The location of the physical disk drive is determined by the content of the denclNum field as follows: - If denclNum is less than 99, the location is as indicated by the content of the rackNum, denclNum, and bay fields.
- If denclNum is equal to 99, the location is unknown. Note that the content of the rackNum and bay fields is undefined in this case.
- If denclNum is greater than 99, the HSV110 controller does not have proof of the current location but the last known location is indicated by the content of the rackNum, denclNum, and bay fields. Subtract 100 from the content of those fields to determine the actual last known location. If there have been no configuration changes, the last known location values will be accurate. The identity contained in the device field should be used to confirm the last known location values.
Note that the content of the rackNum field will not be valid until a future release. The Fibre Channel Exchange Descriptor class is contained in the fedClass field. The numTimes field is the number of check condition errors reported by the physical disk drive in the previous minute. The enclosures array shows the drive enclosures available on the Fibre Channel port identified in the cerpId field. The location of an available drive enclosure is determined by the content of the enclosures.denclNum field as follows: - If enclosures.denclNum is less than 99, the location is as indicated by the content of the enclosures.rackNum and enclosures.denclNum fields.
- If enclosures.denclNum is equal to 99, the enclosures array entry is not used. Note that the content of the enclosures.rackNum field is undefined in this case.
- If enclosures.denclNum is greater than 99, the HSV110 controller does not have proof of the current location but the last known location is indicated by the content of the enclosures.rackNum and enclosures.denclNum fields. Subtract 100 from the content of those fields to determine the actual last known location. If there have been no configuration changes, the last known location values will be accurate.
Note that the content of the enclosures.rackNum field will not be valid until a future release."
--#TYPE "StorageCell Event"
--#SUMMARY "SCellName-TimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."
--#ARGUMENTS {0,1,2,3,4,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
--#STATE WARNING
::= 13601546
sCellEventTrap6B TRAP-TYPE -- CAC Code: 47
ENTERPRISE compaq
VARIABLES { scellNameDateTime,
scellSWComponent,
scellECode,
scellCAC,
scellEIP}
DESCRIPTION
"Severity: Warning -- not failed but attention recommended or required. A non-data exchange sent to a physical disk drive has timed out. The identity of the physical disk drive is contained in the device field. The Fibre Channel port used to communicate with the physical disk drive is contained in the cerpId field. The HSV110 controller internal Fibre Channel port number used to communicate with the physical disk drive is contained in the port field. The arbitrated loop physical address of the physical disk drive is contained in the alPa field. The location of the physical disk drive is determined by the content of the denclNum field as follows: - If denclNum is less than 99, the location is as indicated by the content of the rackNum, denclNum, and bay fields.
- If denclNum is equal to 99, the location is unknown. Note that the content of the rackNum and bay fields is undefined in this case.
- If denclNum is greater than 99, the HSV110 controller does not have proof of the current location but the last known location is indicated by the content of the rackNum, denclNum, and bay fields. Subtract 100 from the content of those fields to determine the actual last known location. If there have been no configuration changes, the last known location values will be accurate. The identity contained in the device field should be used to confirm the last known location values.
Note that the content of the rackNum field will not be valid until a future release. The Fibre Channel Exchange Descriptor class is contained in the fedClass field. The command issued to the physical disk drive is contained in the cmd field. Note that in this case the content of the error field is undefined. The enclosures array shows the drive enclosures available on the Fibre Channel port identified in the cerpId field. The location of an available drive enclosure is determined by the content of the enclosures.denclNum field as follows: - If enclosures.denclNum is less than 99, the location is as indicated by the content of the enclosures.rackNum and enclosures.denclNum fields.
- If enclosures.denclNum is equal to 99, the enclosures array entry is not used. Note that the content of the enclosures.rackNum field is undefined in this case.
- If enclosures.denclNum is greater than 99, the HSV110 controller does not have proof of the current location but the last known location is indicated by the content of the enclosures.rackNum and enclosures.denclNum fields. Subtract 100 from the content of those fields to determine the actual last known location. If there have been no configuration changes, the last known location values will be accurate.
Note that the content of the enclosures.rackNum field will not be valid until a future release."
--#TYPE "StorageCell Event"
--#SUMMARY "SCellName-TimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."
--#ARGUMENTS {0,1,2,3,4,}
--#SEVERITY MINOR
--#TIMEINDEX 136
--#STATE WARNING
::= 13601547
sCellEventTrap6C TRAP-TYPE -- CAC Code: 0
ENTERPRISE compaq
VARIABLES { scellNameDateTime,
scellSWComponent,
scellECode,
scellCAC,
scellEIP}
DESCRIPTION
"Severity: Normal -- informational in nature. A loop switch has been detected on a Fibre Channel port. The identity of the Fibre Channel port is contained in the cerpId field. The HSV110 controller internal Fibre Channel port number is contained in the port field. Note that in this case the content of the device, alPa, rackNum, denclNum, bay, fedClass and numTimes fields is undefined. The enclosures array shows the drive enclosures available on the Fibre Channel port identified in the cerpId field. The missingPort and missingCerpId fields are unused. The location of an available drive enclosure is determined by the content of the enclosures.denclNum field as follows: - If enclosures.denclNum is less than 99, the location is as indicated by the content of the enclosures.rackNum and enclosures.denclNum fields.
- If enclosures.denclNum is equal to 99, the enclosures array entry is not used. Note that the content of the enclosures.rackNum field is undefined in this case.
- If enclosures.denclNum is greater than 99, the HSV110 controller does not have proof of the current location but the last known location is indicated by the content of the enclosures.rackNum and enclosures.denclNum fields. Subtract 100 from the content of those fields to determine the actual last known location. If there have been no configuration changes, the last known location values will be accurate.
Note that the content of the enclosures.rackNum field will not be valid until a future release."
--#TYPE "StorageCell Event"
--#SUMMARY "SCellName-TimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."
--#ARGUMENTS {0,1,2,3,4,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
--#STATE WARNING
::= 13601548
sCellEventTrap6D TRAP-TYPE -- CAC Code: 0
ENTERPRISE compaq
VARIABLES { scellNameDateTime,
scellSWComponent,
scellECode,
scellCAC,
scellEIP}
DESCRIPTION
"Severity: Normal -- informational in nature. The location of a physical disk drive previously reported as unknown is now known. The identity of the physical disk drive is contained in the device field. The Fibre Channel port used to communicate with the physical disk drive is contained in the cerpId field. The HSV110 controller internal Fibre Channel port number used to communicate with the physical disk drive is contained in the port field. The arbitrated loop physical address of the physical disk drive is contained in the alPa field. The missingPort and missingCerpId fields are unused. The location of the physical disk drive is contained in the rackNum, denclNum, and bay fields. Note that the content of the rackNum field will not be valid until a future release. Note also that in this case the content of fedClass, alPa and numTimes fields are undefined. The enclosures array shows the drive enclosures available on the Fibre Channel port identified in the cerpId field. The location of an available drive enclosure is determined by the content of the enclosures.denclNum field as follows: - If enclosures.denclNum is less than 99, the location is as indicated by the content of the enclosures.rackNum and enclosures.denclNum fields.
- If enclosures.denclNum is equal to 99, the enclosures array entry is not used. Note that the content of the enclosures.rackNum field is undefined in this case.
- If enclosures.denclNum is greater than 99, the HSV110 controller does not have proof of the current location but the last known location is indicated by the content of the enclosures.rackNum and enclosures.denclNum fields. Subtract 100 from the content of those fields to determine the actual last known location. If there have been no configuration changes, the last known location values will be accurate.
Note that the content of the enclosures.rackNum field will not be valid until a future release."
--#TYPE "StorageCell Event"
--#SUMMARY "SCellName-TimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."
--#ARGUMENTS {0,1,2,3,4,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
--#STATE WARNING
::= 13601549
sCellEventTrap6E TRAP-TYPE -- CAC Code: 96
ENTERPRISE compaq
VARIABLES { scellNameDateTime,
scellSWComponent,
scellECode,
scellCAC,
scellEIP}
DESCRIPTION
"Severity: Critical -- failure or failure imminent. A Drive Enclosure Environmental Monitoring Unit requested a code update but the code update could not be found, so the update was not performed. The identity of the affected Drive Enclosure Environmental Monitoring Unit is contained in the device field. The Fibre Channel port used to communicate with the Drive Enclosure Environmental Monitoring Unit is contained in the cerpId field. The HSV110 controller internal Fibre Channel port number used to communicate with the Drive Enclosure Environmental Monitoring Unit is contained in the port field. The missingPort and missingCerpId fields are unused. The location of the Drive Enclosure Environmental Monitoring Unit is contained in the rackNum and denclNum fields. Note that the content of the rackNum field will not be valid until a future release. Note also that in this case the content of the alPa, bay, fedClass and numTimes field is undefined. The enclosures array shows the drive enclosures available on the Fibre Channel port identified in the cerpId field. The location of an available drive enclosure is determined by the content of the enclosures.denclNum field as follows: - If enclosures.denclNum is less than 99, the location is as indicated by the content of the enclosures.rackNum and enclosures.denclNum fields.
- If enclosures.denclNum is equal to 99, the enclosures array entry is not used. Note that the content of the enclosures.rackNum field is undefined in this case.
- If enclosures.denclNum is greater than 99, the HSV110 controller does not have proof of the current location but the last known location is indicated by the content of the enclosures.rackNum and enclosures.denclNum fields. Subtract 100 from the content of those fields to determine the actual last known location. If there have been no configuration changes, the last known location values will be accurate.
Note that the content of the enclosures.rackNum field will not be valid until a future release."
--#TYPE "StorageCell Event"
--#SUMMARY "SCellName-TimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."
--#ARGUMENTS {0,1,2,3,4,}
--#SEVERITY CRITICAL
--#TIMEINDEX 136
--#STATE WARNING
::= 13601550
sCellEventTrap6F TRAP-TYPE -- CAC Code: 40
ENTERPRISE compaq
VARIABLES { scellNameDateTime,
scellSWComponent,
scellECode,
scellCAC,
scellEIP}
DESCRIPTION
"Severity: Critical -- failure or failure imminent. The Drive Enclosure Environmental Monitoring Unit is able to communicate with a physical disk drive but this HSV110 controller is unable to communicate with that physical disk drive on the Fibre Channel bus. The identity of the Drive Enclosure Environmental Monitoring Unit is contained in the device field. The Fibre Channel port used to communicate with the physical disk drive is contained in the cerpId field. The HSV110 controller internal Fibre Channel port number used to communicate with the physical disk drive is contained in the port field. The missingPort and missingCerpId fields are unused. The location of the physical disk drive is contained in the rackNum, denclNum, and bay fields. Note that the content of the rackNum field will not be valid until a future release. Note also that in this case the content of the alPa, fedClass and numTimes fields is undefined. The enclosures array shows the drive enclosures available on the Fibre Channel port identified in the cerpId field. The location of an available drive enclosure is determined by the content of the enclosures.denclNum field as follows: - If enclosures.denclNum is less than 99, the location is as indicated by the content of the enclosures.rackNum and enclosures.denclNum fields.
- If enclosures.denclNum is equal to 99, the enclosures array entry is not used. Note that the content of the enclosures.rackNum field is undefined in this case.
- If enclosures.denclNum is greater than 99, the HSV110 controller does not have proof of the current location but the last known location is indicated by the content of the enclosures.rackNum and enclosures.denclNum fields. Subtract 100 from the content of those fields to determine the actual last known location. If there have been no configuration changes, the last known location values will be accurate.
Note that the content of the enclosures.rackNum field will not be valid until a future release."
--#TYPE "StorageCell Event"
--#SUMMARY "SCellName-TimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."
--#ARGUMENTS {0,1,2,3,4,}
--#SEVERITY CRITICAL
--#TIMEINDEX 136
--#STATE WARNING
::= 13601551
sCellEventTrap610 TRAP-TYPE -- CAC Code: 9b
ENTERPRISE compaq
VARIABLES { scellNameDateTime,
scellSWComponent,
scellECode,
scellCAC,
scellEIP}
DESCRIPTION
"Severity: Undetermined -- more information needed to determine severity. A HSV110 controller is unable to communicate with this Drive Enclosure Environmental Monitoring Unit. The Drive Enclosure Environmental Monitoring Unit identified in the device field has stopped communicating with the HSV110 controller. The Fibre Channel port used to communicate with the Drive Enclosure Environmental Monitoring Unit is contained in the cerpId field. The HSV110 controller internal Fibre Channel port number used to communicate with the Drive Enclosure Environmental Monitoring Unit is contained in the port field. The missingPort and missingCerpId fields are unused. The location of the Drive Enclosure Environmental Monitoring Unit is contained in the rackNum and denclNum fields. Note that the content of the rackNum field will not be valid until a future release. Note also that in this case the content of the bay, alPa, fedClass and numTimes fields is undefined. The enclosures array shows the drive enclosures available on the Fibre Channel port identified in the cerpId field. The location of an available drive enclosure is determined by the content of the enclosures.denclNum field as follows: - If enclosures.denclNum is less than 99, the location is as indicated by the content of the enclosures.rackNum and enclosures.denclNum fields.
- If enclosures.denclNum is equal to 99, the enclosures array entry is not used. Note that the content of the enclosures.rackNum field is undefined in this case.
- If enclosures.denclNum is greater than 99, the HSV110 controller does not have proof of the current location but the last known location is indicated by the content of the enclosures.rackNum and enclosures.denclNum fields. Subtract 100 from the content of those fields to determine the actual last known location. If there have been no configuration changes, the last known location values will be accurate.
Note that the content of the enclosures.rackNum field will not be valid until a future release."
--#TYPE "StorageCell Event"
--#SUMMARY "SCellName-TimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."
--#ARGUMENTS {0,1,2,3,4,}
--#SEVERITY CRITICAL
--#TIMEINDEX 136
--#STATE WARNING
::= 13601552
sCellEventTrap612 TRAP-TYPE -- CAC Code: 0
ENTERPRISE compaq
VARIABLES { scellNameDateTime,
scellSWComponent,
scellECode,
scellCAC,
scellEIP}
DESCRIPTION
"Severity: Normal -- informational in nature. The retry count for a task assigned to a Drive Enclosure Environmental Monitoring Unit has been exhausted. The Fibre Channel port used to communicate with the physical disk drive is contained in the cerpId field. The HSV110 controller internal Fibre Channel port number used to communicate with the physical disk drive is contained in the port field. The peb array contains the task list that was intended to be sent to the Drive Enclosure Environmental Monitoring Unit. The peqFrzProdIndex field contains the task that was being retried. The peqProdIndex field contains the drive enclosure where the physical disk drive used to communicate with the Drive Enclosure Environmental Monitoring Unit is located. The peqConsIndex field identifies the Fibre Channel loop pair (0 = Loop A, 1 = Loop B) used to communicate with the physical disk drive that was used to communicate with the Drive Enclosure Environmental Monitoring Unit. The failureCause field contains the bay where the physical disk drive used to communicate with the Drive Enclosure Environmental Monitoring Unit."
--#TYPE "StorageCell Event"
--#SUMMARY "SCellName-TimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."
--#ARGUMENTS {0,1,2,3,4,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
--#STATE WARNING
::= 13601554
sCellEventTrap613 TRAP-TYPE -- CAC Code: 0
ENTERPRISE compaq
VARIABLES { scellNameDateTime,
scellSWComponent,
scellECode,
scellCAC,
scellEIP}
DESCRIPTION
"Severity: Normal -- informational in nature. A Drive Enclosure Environmental Monitoring Unit is able to communicate with this HSV110 controller. The identity of the Drive Enclosure Environmental Monitoring Unit is contained in the device field. The Fibre Channel port used to communicate with the Drive Enclosure Environmental Monitoring Unit is contained in the cerpId field. The HSV110 controller internal Fibre Channel port number used to communicate with the Drive Enclosure Environmental Monitoring Unit is contained in the port field. The missingPort and missingCerpId fields are unused. The location of the Drive Enclosure Environmental Monitoring Unit is contained in the rackNum and denclNum fields. Note that the content of the rackNum field will not be valid until a future release. Note also that in this case the content of the bay, fedClass and numTimes fields is undefined. The enclosures array shows the drive enclosures available on the Fibre Channel port identified in the cerpId field. The location of an available drive enclosure is determined by the content of the enclosures.denclNum field as follows: - If enclosures.denclNum is less than 99, the location is as indicated by the content of the enclosures.rackNum and enclosures.denclNum fields.
- If enclosures.denclNum is equal to 99, the enclosures array entry is not used. Note that the content of the enclosures.rackNum field is undefined in this case.
- If enclosures.denclNum is greater than 99, the HSV110 controller does not have proof of the current location but the last known location is indicated by the content of the enclosures.rackNum and enclosures.denclNum fields. Subtract 100 from the content of those fields to determine the actual last known location. If there have been no configuration changes, the last known location values will be accurate.
Note that the content of the enclosures.rackNum field will not be valid until a future release."
--#TYPE "StorageCell Event"
--#SUMMARY "SCellName-TimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."
--#ARGUMENTS {0,1,2,3,4,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
--#STATE WARNING
::= 13601555
sCellEventTrap614 TRAP-TYPE -- CAC Code: 98
ENTERPRISE compaq
VARIABLES { scellNameDateTime,
scellSWComponent,
scellECode,
scellCAC,
scellEIP}
DESCRIPTION
"Severity: Critical -- failure or failure imminent. There are too many drive enclosures attached to a Fibre Channel port. The Fibre Channel port with too many drive enclosures attached to the HSV110 controller is contained in the cerpId field. Note that in this case the content of the bay, fedClass, rackNum, denclNum and numTimes fields is undefined. The enclosures array shows the drive enclosures available on the Fibre Channel port identified in the cerpId field. The missingPort and missingCerpId fields are unused. The location of the identified in the cerpId field. The device, missingPort and missingCerpId fields are unused. The location of the physical disk drive is determined by the content of the denclNum field as follows: - If enclosures.denclNum is less than 99, the location is as indicated by the content of the enclosures.rackNum and enclosures.denclNum fields.
- If enclosures.denclNum is equal to 99, the enclosures array entry is not used. Note that the content of the enclosures.rackNum field is undefined in this case.
- If enclosures.denclNum is greater than 99, the HSV110 controller does not have proof of the current location but the last known location is indicated by the content of the enclosures.rackNum and enclosures.denclNum fields. Subtract 100 from the content of those fields to determine the actual last known location. If there have been no configuration changes, the last known location values will be accurate.
Note that the content of the enclosures.rackNum field will not be valid until a future release."
--#TYPE "StorageCell Event"
--#SUMMARY "SCellName-TimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."
--#ARGUMENTS {0,1,2,3,4,}
--#SEVERITY CRITICAL
--#TIMEINDEX 136
--#STATE WARNING
::= 13601556
sCellEventTrap615 TRAP-TYPE -- CAC Code: 99
ENTERPRISE compaq
VARIABLES { scellNameDateTime,
scellSWComponent,
scellECode,
scellCAC,
scellEIP}
DESCRIPTION
"Severity: Critical -- failure or failure imminent. The cable connected to the I/O module is attached to the wrong Fibre Channel port. The Fibre Channel port incorrectly attached to the HSV110 controller is contained in the cerpId field. Note that in this case the content of the device, missingPort, missingCerpId, bay, fedClass, rackNum, denclNum and numTimes fields is undefined. The enclosures array shows the drive enclosures available on the Fibre Channel port identified in the cerpId field. The location of an available drive enclosure is determined by the content of the enclosures.denclNum field as follows: - If enclosures.denclNum is less than 99, the location is as indicated by the content of the enclosures.rackNum and enclosures.denclNum fields.
- If enclosures.denclNum is equal to 99, the enclosures array entry is not used. Note that the content of the enclosures.rackNum field is undefined in this case.
- If enclosures.denclNum is greater than 99, the HSV110 controller does not have proof of the current location but the last known location is indicated by the content of the enclosures.rackNum and enclosures.denclNum fields. Subtract 100 from the content of those fields to determine the actual last known location. If there have been no configuration changes, the last known location values will be accurate.
Note that the content of the enclosures.rackNum field will not be valid until a future release."
--#TYPE "StorageCell Event"
--#SUMMARY "SCellName-TimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."
--#ARGUMENTS {0,1,2,3,4,}
--#SEVERITY CRITICAL
--#TIMEINDEX 136
--#STATE WARNING
::= 13601557
sCellEventTrap616 TRAP-TYPE -- CAC Code: 97
ENTERPRISE compaq
VARIABLES { scellNameDateTime,
scellSWComponent,
scellECode,
scellCAC,
scellEIP}
DESCRIPTION
"Severity: Critical -- failure or failure imminent. A HSV110 controller does not have an address on the enclosure address bus. The HSV110 controller location cannot be identified. Note that in this case the content of the missingPort, missingCerpId, bay, fedClass, rackNum, denclNum, alPa, device, cerpId, port, enclosures array and numTimes fields is undefined."
--#TYPE "StorageCell Event"
--#SUMMARY "SCellName-TimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."
--#ARGUMENTS {0,1,2,3,4,}
--#SEVERITY CRITICAL
--#TIMEINDEX 136
--#STATE WARNING
::= 13601558
sCellEventTrap618 TRAP-TYPE -- CAC Code: 0
ENTERPRISE compaq
VARIABLES { scellNameDateTime,
scellSWComponent,
scellECode,
scellCAC,
scellEIP}
DESCRIPTION
"Severity: Normal -- informational in nature. A Drive Enclosure Environmental Monitoring Unit has begun updating its code. Do not power down this drive enclosure until the code update has completed. The identity of the Drive Enclosure Environmental Monitoring Unit is contained in the device field. The Fibre Channel port used to communicate with the Drive Enclosure Environmental Monitoring Unit is contained in the cerpId field. The HSV110 controller internal Fibre Channel port number used to communicate with the Drive Enclosure Environmental Monitoring Unit is contained in the port field. The missingPort and missingCerpId fields are unused. The location of the Drive Enclosure Environmental Monitoring Unit is determined by the content of the denclNum field as follows: - If denclNum is less than 99, the location is as indicated by the content of the rackNum and denclNum fields.
- If denclNum is equal to 99, the location is unknown. Note that the content of the rackNum field is undefined in this case. In addition, the device field may contain all zeroes.
- If denclNum is greater than 99, the HSV110 controller does not have proof of the current location but the last known location is indicated by the content of the rackNum and denclNum fields. Subtract 100 from the content of those fields to determine the actual last known location. If there have been no configuration changes, the last known location values will be accurate. The identity contained in the device field should be used to confirm the last known location values.
Note that the content of the rackNum field will not be valid until a future release. Note also that the content of the fedClass, alPa, and numTimes fields is undefined. The enclosures array shows the drive enclosures available on the Fibre Channel port identified in the cerpId field. The location of an available drive enclosure is determined by the content of the enclosures.denclNum field as follows: - If enclosures.denclNum is less than 99, the location is as indicated by the content of the enclosures.rackNum and enclosures.denclNum fields.
- If enclosures.denclNum is equal to 99, the enclosures array entry is not used. Note that the content of the enclosures.rackNum field is undefined in this case.
- If enclosures.denclNum is greater than 99, the HSV110 controller does not have proof of the current location but the last known location is indicated by the content of the enclosures.rackNum and enclosures.denclNum fields. Subtract 100 from the content of those fields to determine the actual last known location. If there have been no configuration changes, the last known location values will be accurate.
Note that the content of the enclosures.rackNum field will not be valid until a future release."
--#TYPE "StorageCell Event"
--#SUMMARY "SCellName-TimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."
--#ARGUMENTS {0,1,2,3,4,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
--#STATE WARNING
::= 13601560
sCellEventTrap619 TRAP-TYPE -- CAC Code: 0
ENTERPRISE compaq
VARIABLES { scellNameDateTime,
scellSWComponent,
scellECode,
scellCAC,
scellEIP}
DESCRIPTION
"Severity: Normal -- informational in nature. A Drive Enclosure Environmental Monitoring Unit has completed updating its code. It is now safe to power down this drive enclosure. The identity of the Drive Enclosure Environmental Monitoring Unit is contained in the device field. The Fibre Channel port used to communicate with the Drive Enclosure Environmental Monitoring Unit is contained in the cerpId field. The HSV110 controller internal Fibre Channel port number used to communicate with the Drive Enclosure Environmental Monitoring Unit is contained in the port field. The missingPort and missingCerpId fields are unused. The location of the Drive Enclosure Environmental Monitoring Unit is contained in the rackNum and denclNum fields. Note that the content of the rackNum field will not be valid until a future release. Note also that in this case the content of the fedClass, alPa, and numTimes fields is undefined. The enclosures array shows the drive enclosures available on the Fibre Channel port identified in the cerpId field. The location of an available drive enclosure is determined by the content of the enclosures.denclNum field as follows: - If enclosures.denclNum is less than 99, the location is as indicated by the content of the enclosures.rackNum and enclosures.denclNum fields.
- If enclosures.denclNum is equal to 99, the enclosures array entry is not used. Note that the content of the enclosures.rackNum field is undefined in this case.
- If enclosures.denclNum is greater than 99, the HSV110 controller does not have proof of the current location but the last known location is indicated by the content of the enclosures.rackNum and enclosures.denclNum fields. Subtract 100 from the content of those fields to determine the actual last known location. If there have been no configuration changes, the last known location values will be accurate.
Note that the content of the enclosures.rackNum field will not be valid until a future release."
--#TYPE "StorageCell Event"
--#SUMMARY "SCellName-TimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."
--#ARGUMENTS {0,1,2,3,4,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
--#STATE WARNING
::= 13601561
sCellEventTrap61a TRAP-TYPE -- CAC Code: 40
ENTERPRISE compaq
VARIABLES { scellNameDateTime,
scellSWComponent,
scellECode,
scellCAC,
scellEIP}
DESCRIPTION
"Severity: Critical -- failure or failure imminent. A physical disk drive has exceeded its soft error threshold. The identity of the physical disk drive is contained in the device field. The Fibre Channel port used to communicate with the physical disk drive is contained in the cerpId field. The HSV110 controller internal Fibre Channel port number used to communicate with the physical disk drive is contained in the port field. The arbitrated loop physical address of the physical disk drive is contained in the alPa field. The location of the physical disk drive is determined by the content of the denclNum field as follows: - If denclNum is less than 99, the location is as indicated by the content of the rackNum, denclNum, and bay fields.
- If denclNum is equal to 99, the location is unknown. Note that the content of the rackNum and bay fields is undefined in this case.
- If denclNum is greater than 99, the HSV110 controller does not have proof of the current location but the last known location is indicated by the content of the rackNum, denclNum, and bay fields. Subtract 100 from the content of those fields to determine the actual last known location. If there have been no configuration changes, the last known location values will be accurate. The identity contained in the device field should be used to confirm the last known location values.
Note that the content of the rackNum field will not be valid until a future release. Note also that in this case the content of the fedClass, cdb, and senseData fields is undefined. The enclosures array shows the drive enclosures available on the Fibre Channel port identified in the cerpId field. The location of an available drive enclosure is determined by the content of the enclosures.denclNum field as follows: - If enclosures.denclNum is less than 99, the location is as indicated by the content of the enclosures.rackNum and enclosures.denclNum fields.
- If enclosures.denclNum is equal to 99, the enclosures array entry is not used. Note that the content of the enclosures.rackNum field is undefined in this case.
- If enclosures.denclNum is greater than 99, the HSV110 controller does not have proof of the current location but the last known location is indicated by the content of the enclosures.rackNum and enclosures.denclNum fields. Subtract 100 from the content of those fields to determine the actual last known location. If there have been no configuration changes, the last known location values will be accurate.
Note that the content of the enclosures.rackNum field will not be valid until a future release."
--#TYPE "StorageCell Event"
--#SUMMARY "SCellName-TimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."
--#ARGUMENTS {0,1,2,3,4,}
--#SEVERITY CRITICAL
--#TIMEINDEX 136
--#STATE WARNING
::= 13601562
sCellEventTrap61b TRAP-TYPE -- CAC Code: 0
ENTERPRISE compaq
VARIABLES { scellNameDateTime,
scellSWComponent,
scellECode,
scellCAC,
scellEIP}
DESCRIPTION
"Severity: Normal -- informational in nature. A HSV110 controller now has an address on the enclosure address bus. The HSV110 controller location has been identified. The location of the HSV110 controller is contained in the rackNum and denclNum fields. Note that the content of the rackNum field will not be valid until a future release. Note also that in this case the content of the bay, fedClass, alPa, cerpId, port, and numTimes fields is undefined. The enclosures array shows the drive enclosures available on the Fibre Channel port identified in the cerpId field. The missingPort and missingCerpId fields are unused. The location of an available drive enclosure is determined by the content of the enclosures.denclNum field as follows: - If enclosures.denclNum is less than 99, the location is as indicated by the content of the enclosures.rackNum and enclosures.denclNum fields.
- If enclosures.denclNum is equal to 99, the enclosures array entry is not used. Note that the content of the enclosures.rackNum field is undefined in this case.
- If enclosures.denclNum is greater than 99, the HSV110 controller does not have proof of the current location but the last known location is indicated by the content of the enclosures.rackNum and enclosures.denclNum fields. Subtract 100 from the content of those fields to determine the actual last known location. If there have been no configuration changes, the last known location values will be accurate.
Note that the content of the enclosures.rackNum field will not be valid until a future release."
--#TYPE "StorageCell Event"
--#SUMMARY "SCellName-TimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."
--#ARGUMENTS {0,1,2,3,4,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
--#STATE WARNING
::= 13601563
sCellEventTrap61c TRAP-TYPE -- CAC Code: 47
ENTERPRISE compaq
VARIABLES { scellNameDateTime,
scellSWComponent,
scellECode,
scellCAC,
scellEIP}
DESCRIPTION
"Severity: Warning -- not failed but attention recommended or required. An outbound frame targeted to a physical disk drive has timed out. The identity of the physical disk drive is contained in the device field. The Fibre Channel port used to communicate with the physical disk drive is contained in the cerpId field. The HSV110 controller internal Fibre Channel port number used to communicate with the physical disk drive is contained in the port field. The arbitrated loop physical address of the physical disk drive is contained in the alPa field. The location of the physical disk drive is determined by the content of the denclNum field as follows: - If denclNum is less than 99, the location is as indicated by the content of the rackNum, denclNum, and bay fields.
- If denclNum is equal to 99, the location is unknown. Note that the content of the rackNum and bay fields is undefined in this case.
- If denclNum is greater than 99, the HSV110 controller does not have proof of the current location but the last known location is indicated by the content of the rackNum, denclNum, and bay fields. Subtract 100 from the content of those fields to determine the actual last known location. If there have been no configuration changes, the last known location values will be accurate. The identity contained in the device field should be used to confirm the last known location values.
Note that the content of the rackNum field will not be valid until a future release. The Fibre Channel Exchange Descriptor class is contained in the fedClass field. The command issued to the physical disk drive is contained in the cmd field. Note that in this case the content of the error field is undefined. The enclosures array shows the drive enclosures available on the Fibre Channel port identified in the cerpId field. The location of an available drive enclosure is determined by the content of the enclosures.denclNum field as follows: - If enclosures.denclNum is less than 99, the location is as indicated by the content of the enclosures.rackNum and enclosures.denclNum fields.
- If enclosures.denclNum is equal to 99, the enclosures array entry is not used. Note that the content of the enclosures.rackNum field is undefined in this case.
- If enclosures.denclNum is greater than 99, the HSV110 controller does not have proof of the current location but the last known location is indicated by the content of the enclosures.rackNum and enclosures.denclNum fields. Subtract 100 from the content of those fields to determine the actual last known location. If there have been no configuration changes, the last known location values will be accurate.
Note that the content of the enclosures.rackNum field will not be valid until a future release."
--#TYPE "StorageCell Event"
--#SUMMARY "SCellName-TimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."
--#ARGUMENTS {0,1,2,3,4,}
--#SEVERITY MINOR
--#TIMEINDEX 136
--#STATE WARNING
::= 13601564
sCellEventTrap61d TRAP-TYPE -- CAC Code: 47
ENTERPRISE compaq
VARIABLES { scellNameDateTime,
scellSWComponent,
scellECode,
scellCAC,
scellEIP}
DESCRIPTION
"Severity: Warning -- not failed but attention recommended or required. A Fibre Channel exchange to a physical disk drive has completed but is missing data. The identity of the physical disk drive is contained in the device field. The Fibre Channel port used to communicate with the physical disk drive is contained in the cerpId field. The HSV110 controller internal Fibre Channel port number used to communicate with the physical disk drive is contained in the port field. The arbitrated loop physical address of the physical disk drive is contained in the alPa field. The location of the physical disk drive is determined by the content of the denclNum field as follows: - If denclNum is less than 99, the location is as indicated by the content of the rackNum, denclNum, and bay fields.
- If denclNum is equal to 99, the location is unknown. Note that the content of the rackNum and bay fields is undefined in this case.
- If denclNum is greater than 99, the HSV110 controller does not have proof of the current location but the last known location is indicated by the content of the rackNum, denclNum, and bay fields. Subtract 100 from the content of those fields to determine the actual last known location. If there have been no configuration changes, the last known location values will be accurate. The identity contained in the device field should be used to confirm the last known location values.
Note that the content of the rackNum field will not be valid until a future release. The Fibre Channel Exchange Descriptor class is contained in the fedClass field. The command issued to the physical disk drive is contained in the cmd field. Note that in this case the content of the error field is undefined. The enclosures array shows the drive enclosures available on the Fibre Channel port identified in the cerpId field. The location of an available drive enclosure is determined by the content of the enclosures.denclNum field as follows: - If enclosures.denclNum is less than 99, the location is as indicated by the content of the enclosures.rackNum and enclosures.denclNum fields.
- If enclosures.denclNum is equal to 99, the enclosures array entry is not used. Note that the content of the enclosures.rackNum field is undefined in this case.
- If enclosures.denclNum is greater than 99, the HSV110 controller does not have proof of the current location but the last known location is indicated by the content of the enclosures.rackNum and enclosures.denclNum fields. Subtract 100 from the content of those fields to determine the actual last known location. If there have been no configuration changes, the last known location values will be accurate.
Note that the content of the enclosures.rackNum field will not be valid until a future release."
--#TYPE "StorageCell Event"
--#SUMMARY "SCellName-TimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."
--#ARGUMENTS {0,1,2,3,4,}
--#SEVERITY MINOR
--#TIMEINDEX 136
--#STATE WARNING
::= 13601565
sCellEventTrap61e TRAP-TYPE -- CAC Code: 4c
ENTERPRISE compaq
VARIABLES { scellNameDateTime,
scellSWComponent,
scellECode,
scellCAC,
scellEIP}
DESCRIPTION
"Severity: Critical -- failure or failure imminent. A HSV110 controller has detected only one port of a Fibre Channel device. This Fibre Channel device has entered the Single Port on Fibre state which should be corrected as soon as possible. The identity of the Fibre Channel device is contained in the device field. The Fibre Channel port still able to communicate with the Fibre Channel device is contained in the cerpId field. The HSV110 controller internal Fibre Channel port number able to communicate with the Fibre Channel device is contained in the port field. The Fibre Channel port unable to communicate with the Fibre Channel device is contained in the missingCerpId field. The HSV110 controller internal Fibre Channel port number unable to communicate with the Fibre Channel device is contained in the missingPort field. The arbitrated loop physical address of the Fibre Channel device is contained in the alPa field. The location of the Fibre Channel device is determined by the content of the denclNum field as follows: - If denclNum is less than 99, the location is as indicated by the content of the rackNum, denclNum, and bay fields.
- If denclNum is equal to 99, the location is unknown. Note that the content of the rackNum and bay fields is undefined in this case.
- If denclNum is greater than 99, the HSV110 controller does not have proof of the current location but the last known location is indicated by the content of the rackNum, denclNum, and bay fields. Subtract 100 from the content of those fields to determine the actual last known location. If there have been no configuration changes, the last known location values will be accurate. The identity contained in the device field should be used to confirm the last known location values.
Note that the content of the rackNum field will not be valid until a future release. Note also that in this case the content of the fedClass, and numTimes fields is undefined. The enclosures array shows the drive enclosures available on the Fibre Channel port identified in the cerpId field. The location of an available drive enclosure is determined by the content of the enclosures.denclNum field as follows: - If enclosures.denclNum is less than 99, the location is as indicated by the content of the enclosures.rackNum and enclosures.denclNum fields.
- If enclosures.denclNum is equal to 99, the enclosures array entry is not used. Note that the content of the enclosures.rackNum field is undefined in this case.
- If enclosures.denclNum is greater than 99, the HSV110 controller does not have proof of the current location but the last known location is indicated by the content of the enclosures.rackNum and enclosures.denclNum fields. Subtract 100 from the content of those fields to determine the actual last known location. If there have been no configuration changes, the last known location values will be accurate.
Note that the content of the enclosures.rackNum field will not be valid until a future release."
--#TYPE "StorageCell Event"
--#SUMMARY "SCellName-TimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."
--#ARGUMENTS {0,1,2,3,4,}
--#SEVERITY CRITICAL
--#TIMEINDEX 136
--#STATE WARNING
::= 13601566
sCellEventTrap61f TRAP-TYPE -- CAC Code: 0
ENTERPRISE compaq
VARIABLES { scellNameDateTime,
scellSWComponent,
scellECode,
scellCAC,
scellEIP}
DESCRIPTION
"Severity: Normal -- informational in nature. A previously reported Fibre Channel device with only one port has been corrected and redundancy has been restored. The device is no longer in the Single Port on Fibre state. The identity of the Fibre Channel device is contained in the device field. The Fibre Channel port used to communicate with the Fibre Channel device is contained in the cerpId field. The HSV110 controller internal Fibre Channel port number used to communicate with the Fibre Channel device is contained in the port field. The missingPort and missingCerpId fields are unused. The arbitrated loop physical address of the Fibre Channel device is contained in the alPa field. The location of the Fibre Channel device is determined by the content of the denclNum field as follows: - If denclNum is less than 99, the location is as indicated by the content of the rackNum, denclNum, and bay fields.
- If denclNum is equal to 99, the location is unknown. Note that the content of the rackNum and bay fields is undefined in this case.
- If denclNum is greater than 99, the HSV110 controller does not have proof of the current location but the last known location is indicated by the content of the rackNum, denclNum, and bay fields. Subtract 100 from the content of those fields to determine the actual last known location. If there have been no configuration changes, the last known location values will be accurate. The identity contained in the device field should be used to confirm the last known location values.
Note that the content of the rackNum field will not be valid until a future release. Note also that in this case the content of the fedClass, and numTimes fields is undefined. The enclosures array shows the drive enclosures available on the Fibre Channel port identified in the cerpId field. The location of an available drive enclosure is determined by the content of the enclosures.denclNum field as follows: - If enclosures.denclNum is less than 99, the location is as indicated by the content of the enclosures.rackNum and enclosures.denclNum fields.
- If enclosures.denclNum is equal to 99, the enclosures array entry is not used. Note that the content of the enclosures.rackNum field is undefined in this case.
- If enclosures.denclNum is greater than 99, the HSV110 controller does not have proof of the current location but the last known location is indicated by the content of the enclosures.rackNum and enclosures.denclNum fields. Subtract 100 from the content of those fields to determine the actual last known location. If there have been no configuration changes, the last known location values will be accurate.
Note that the content of the enclosures.rackNum field will not be valid until a future release."
--#TYPE "StorageCell Event"
--#SUMMARY "SCellName-TimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."
--#ARGUMENTS {0,1,2,3,4,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
--#STATE WARNING
::= 13601567
sCellEventTrap620 TRAP-TYPE -- CAC Code: 40
ENTERPRISE compaq
VARIABLES { scellNameDateTime,
scellSWComponent,
scellECode,
scellCAC,
scellEIP}
DESCRIPTION
"Severity: Critical -- failure or failure imminent. An unsupported Fibre Channel device has been detected. The drive has been failed to prevent possible data corruption or system instability. The identity of the Fibre Channel device is contained in the device field. The Fibre Channel port used to communicate with the Fibre Channel device is contained in the cerpId field. The HSV110 controller internal Fibre Channel port number used to communicate with the Fibre Channel device is contained in the port field. The arbitrated loop physical address of the Fibre Channel device is contained in the alPa field. The missingPort and missingCerpId fields are unused. The location of the Fibre Channel device is determined by the content of the denclNum field as follows: - If denclNum is less than 99, the location is as indicated by the content of the rackNum, denclNum, and bay fields.
- If denclNum is equal to 99, the location is unknown. Note that the content of the rackNum and bay fields is undefined in this case.
- If denclNum is greater than 99, the HSV110 controller does not have proof of the current location but the last known location is indicated by the content of the rackNum, denclNum, and bay fields. Subtract 100 from the content of those fields to determine the actual last known location. If there have been no configuration changes, the last known location values will be accurate. The identity contained in the device field should be used to confirm the last known location values.
Note that the content of the rackNum field will not be valid until a future release. Note also that in this case the content of the fedClass and numTimes fields is undefined. The enclosures array shows the drive enclosures available on the Fibre Channel port identified in the cerpId field. The location of an available drive enclosure is determined by the content of the enclosures.denclNum field as follows: - If enclosures.denclNum is less than 99, the location is as indicated by the content of the enclosures.rackNum and enclosures.denclNum fields.
- If enclosures.denclNum is equal to 99, the enclosures array entry is not used. Note that the content of the enclosures.rackNum field is undefined in this case.
- If enclosures.denclNum is greater than 99, the HSV110 controller does not have proof of the current location but the last known location is indicated by the content of the enclosures.rackNum and enclosures.denclNum fields. Subtract 100 from the content of those fields to determine the actual last known location. If there have been no configuration changes, the last known location values will be accurate.
Note that the content of the enclosures.rackNum field will not be valid until a future release."
--#TYPE "StorageCell Event"
--#SUMMARY "SCellName-TimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."
--#ARGUMENTS {0,1,2,3,4,}
--#SEVERITY CRITICAL
--#TIMEINDEX 136
--#STATE WARNING
::= 13601568
sCellEventTrap621 TRAP-TYPE -- CAC Code: 0
ENTERPRISE compaq
VARIABLES { scellNameDateTime,
scellSWComponent,
scellECode,
scellCAC,
scellEIP}
DESCRIPTION
"Severity: Normal -- informational in nature. A Fibre Channel device with the incorrect block size has been detected. The identity of the Fibre Channel device is contained in the device field. The Fibre Channel port used to communicate with the Fibre Channel device is contained in the cerpId field. The HSV110 controller internal Fibre Channel port number used to communicate with the Fibre Channel device is contained in the port field. The arbitrated loop physical address of the Fibre Channel device is contained in the alPa field. The missingPort and missingCerpId fields are unused. The location of the Fibre Channel device is determined by the content of the denclNum field as follows: - If denclNum is less than 99, the location is as indicated by the content of the rackNum, denclNum, and bay fields.
- If denclNum is equal to 99, the location is unknown. Note that the content of the rackNum and bay fields is undefined in this case.
- If denclNum is greater than 99, the HSV110 controller does not have proof of the current location but the last known location is indicated by the content of the rackNum, denclNum, and bay fields. Subtract 100 from the content of those fields to determine the actual last known location. If there have been no configuration changes, the last known location values will be accurate. The identity contained in the device field should be used to confirm the last known location values.
Note that the content of the rackNum field will not be valid until a future release. Note also that in this case the content of the fedClass and numTimes fields is undefined. The enclosures array shows the drive enclosures available on the Fibre Channel port identified in the cerpId field. The location of an available drive enclosure is determined by the content of the enclosures.denclNum field as follows: - If enclosures.denclNum is less than 99, the location is as indicated by the content of the enclosures.rackNum and enclosures.denclNum fields.
- If enclosures.denclNum is equal to 99, the enclosures array entry is not used. Note that the content of the enclosures.rackNum field is undefined in this case.
- If enclosures.denclNum is greater than 99, the HSV110 controller does not have proof of the current location but the last known location is indicated by the content of the enclosures.rackNum and enclosures.denclNum fields. Subtract 100 from the content of those fields to determine the actual last known location. If there have been no configuration changes, the last known location values will be accurate.
Note that the content of the enclosures.rackNum field will not be valid until a future release."
--#TYPE "StorageCell Event"
--#SUMMARY "SCellName-TimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."
--#ARGUMENTS {0,1,2,3,4,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
--#STATE WARNING
::= 13601569
sCellEventTrap623 TRAP-TYPE -- CAC Code: 0
ENTERPRISE compaq
VARIABLES { scellNameDateTime,
scellSWComponent,
scellECode,
scellCAC,
scellEIP}
DESCRIPTION
"Severity: Normal -- informational in nature. A HSV110 controller is about to retry a failed port. The Fibre Channel port that is about to be retried is contained in the cerpId field. The HSV110 controller internal Fibre Channel port number about to be retried is contained in the port field. Note that in this case the content of the bay, rackNum, fedClass, alPa, denclNum, device, and numTimes fields is undefined. The enclosures array shows the drive enclosures available on the Fibre Channel port identified in the cerpId field. The missingPort and missingCerpId fields are unused. The location of an available drive enclosure is determined by the content of the enclosures.denclNum field as follows: - If enclosures.denclNum is less than 99, the location is as indicated by the content of the enclosures.rackNum and enclosures.denclNum fields.
- If enclosures.denclNum is equal to 99, the enclosures array entry is not used. Note that the content of the enclosures.rackNum field is undefined in this case.
- If enclosures.denclNum is greater than 99, the HSV110 controller does not have proof of the current location but the last known location is indicated by the content of the enclosures.rackNum and enclosures.denclNum fields. Subtract 100 from the content of those fields to determine the actual last known location. If there have been no configuration changes, the last known location values will be accurate.
Note that the content of the enclosures.rackNum field will not be valid until a future release."
--#TYPE "StorageCell Event"
--#SUMMARY "SCellName-TimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."
--#ARGUMENTS {0,1,2,3,4,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
--#STATE WARNING
::= 13601571
sCellEventTrap624 TRAP-TYPE -- CAC Code: 0
ENTERPRISE compaq
VARIABLES { scellNameDateTime,
scellSWComponent,
scellECode,
scellCAC,
scellEIP}
DESCRIPTION
"Severity: Normal -- informational in nature. A HSV110 controller has successfully retried a failed port. The Fibre Channel port that has been restarted is contained in the cerpId field. The HSV110 controller internal Fibre Channel port number that has been restarted is contained in the port field. Note that in this case the content of the bay, rackNum, fedClass, alPa, denclNum, device, and numTimes fields is undefined. The enclosures array shows the drive enclosures available on the Fibre Channel port identified in the cerpId field. The missingPort and missingCerpId fields are unused. The location of an available drive enclosure is determined by the content of the enclosures.denclNum field as follows: - If enclosures.denclNum is less than 99, the location is as indicated by the content of the enclosures.rackNum and enclosures.denclNum fields.
- If enclosures.denclNum is equal to 99, the enclosures array entry is not used. Note that the content of the enclosures.rackNum field is undefined in this case.
- If enclosures.denclNum is greater than 99, the HSV110 controller does not have proof of the current location but the last known location is indicated by the content of the enclosures.rackNum and enclosures.denclNum fields. Subtract 100 from the content of those fields to determine the actual last known location. If there have been no configuration changes, the last known location values will be accurate.
Note that the content of the enclosures.rackNum field will not be valid until a future release."
--#TYPE "StorageCell Event"
--#SUMMARY "SCellName-TimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."
--#ARGUMENTS {0,1,2,3,4,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
--#STATE WARNING
::= 13601572
sCellEventTrap625 TRAP-TYPE -- CAC Code: 43
ENTERPRISE compaq
VARIABLES { scellNameDateTime,
scellSWComponent,
scellECode,
scellCAC,
scellEIP}
DESCRIPTION
"Severity: Critical -- failure or failure imminent. A Drive Enclosure Environmental Monitoring Unit has failed to assign a hard address to a physical disk drive on the loop. The device field contains the identity of the enclosure. The Fibre Channel port used to communicate with the physical disk drive is contained in the cerpId field. The HSV110 controller internal Fibre Channel port number used to communicate with the physical disk drive is contained in the port field. The alPa field contains the expected ALPA, and the numTimes field contains the actual ALPA. The missingPort and missingCerpId fields are unused. The location of the physical disk drive is determined by the content of the denclNum field as follows: - If denclNum is less than 99, the location is as indicated by the content of the rackNum, denclNum, and bay fields.
- If denclNum is equal to 99, the location is unknown. Note that the content of the rackNum and bay fields is undefined in this case.
- If denclNum is greater than 99, the HSV110 controller does not have proof of the current location but the last known location is indicated by the content of the rackNum, denclNum, and bay fields. Subtract 100 from the content of those fields to determine the actual last known location. If there have been no configuration changes, the last known location values will be accurate. The identity contained in the device field should be used to confirm the last known location values.
Note that the content of the rackNum field will not be valid until a future release. Note that in this case the content of the fedClass is undefined. The enclosures array shows the drive enclosures available on the Fibre Channel port identified in the cerpId field. The location of an available drive enclosure is determined by the content of the enclosures.denclNum field as follows: - If enclosures.denclNum is less than 99, the location is as indicated by the content of the enclosures.rackNum and enclosures.denclNum fields.
- If enclosures.denclNum is equal to 99, the enclosures array entry is not used. Note that the content of the enclosures.rackNum field is undefined in this case.
- If enclosures.denclNum is greater than 99, the HSV110 controller does not have proof of the current location but the last known location is indicated by the content of the enclosures.rackNum and enclosures.denclNum fields. Subtract 100 from the content of those fields to determine the actual last known location. If there have been no configuration changes, the last known location values will be accurate.
Note that the content of the enclosures.rackNum field will not be valid until a future release."
--#TYPE "StorageCell Event"
--#SUMMARY "SCellName-TimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."
--#ARGUMENTS {0,1,2,3,4,}
--#SEVERITY CRITICAL
--#TIMEINDEX 136
--#STATE WARNING
::= 13601573
sCellEventTrap626 TRAP-TYPE -- CAC Code: 89
ENTERPRISE compaq
VARIABLES { scellNameDateTime,
scellSWComponent,
scellECode,
scellCAC,
scellEIP}
DESCRIPTION
"Severity: Critical -- failure or failure imminent. A Drive Enclosure Environmental Monitoring Unit has failed to assign an address to a physical disk drive on the loop. This has occurred because another physical disk drive has already obtained this ALPA. The device field contains the identity of the enclosure. The Fibre Channel port used to communicate with the physical disk drive is contained in the cerpId field. The HSV110 controller internal Fibre Channel port number used to communicate with the physical disk drive is contained in the port field. The alPa field contains the ALPA that was stolen. The missingPort and missingCerpId fields are unused. The location of the physical disk drive is determined by the content of the denclNum field as follows: - If denclNum is less than 99, the location is as indicated by the content of the rackNum, denclNum, and bay fields.
- If denclNum is equal to 99, the location is unknown. Note that the content of the rackNum and bay fields is undefined in this case.
- If denclNum is greater than 99, the HSV110 controller does not have proof of the current location but the last known location is indicated by the content of the rackNum, denclNum, and bay fields. Subtract 100 from the content of those fields to determine the actual last known location. If there have been no configuration changes, the last known location values will be accurate. The identity contained in the device field should be used to confirm the last known location values.
Note that the content of the rackNum field will not be valid until a future release. Note also that in this case the content of the fedClass and numTimes fields is undefined. The enclosures array shows the drive enclosures available on the Fibre Channel port identified in the cerpId field. The location of an available drive enclosure is determined by the content of the enclosures.denclNum field as follows: - If enclosures.denclNum is less than 99, the location is as indicated by the content of the enclosures.rackNum and enclosures.denclNum fields.
- If enclosures.denclNum is equal to 99, the enclosures array entry is not used. Note that the content of the enclosures.rackNum field is undefined in this case.
- If enclosures.denclNum is greater than 99, the HSV110 controller does not have proof of the current location but the last known location is indicated by the content of the enclosures.rackNum and enclosures.denclNum fields. Subtract 100 from the content of those fields to determine the actual last known location. If there have been no configuration changes, the last known location values will be accurate.
Note that the content of the enclosures.rackNum field will not be valid until a future release."
--#TYPE "StorageCell Event"
--#SUMMARY "SCellName-TimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."
--#ARGUMENTS {0,1,2,3,4,}
--#SEVERITY CRITICAL
--#TIMEINDEX 136
--#STATE WARNING
::= 13601574
sCellEventTrap627 TRAP-TYPE -- CAC Code: 1
ENTERPRISE compaq
VARIABLES { scellNameDateTime,
scellSWComponent,
scellECode,
scellCAC,
scellEIP}
DESCRIPTION
"Severity: Critical -- failure or failure imminent. A Drive Enclosure Environmental Monitoring Unit has failed to assign address(s) to a physical disk drive on the loop. Soft addressing was detected for this enclosure. The device field contains the identity of the enclosure. The Fibre Channel port used to communicate with the physical disk drive is contained in the cerpId field. The HSV110 controller internal Fibre Channel port number used to communicate with the physical disk drive is contained in the port field. The missingPort and missingCerpId fields are unused. The location of the physical disk drive is determined by the content of the denclNum field as follows: - If denclNum is less than 99, the location is as indicated by the content of the rackNum, denclNum, and bay fields.
- If denclNum is equal to 99, the location is unknown. Note that the content of the rackNum and bay fields is undefined in this case.
- If denclNum is greater than 99, the HSV110 controller does not have proof of the current location but the last known location is indicated by the content of the rackNum, denclNum, and bay fields. Subtract 100 from the content of those fields to determine the actual last known location. If there have been no configuration changes, the last known location values will be accurate. The identity contained in the device field should be used to confirm the last known location values.
Note that the content of the rackNum field will not be valid until a future release. Note also that in this case the content of the fedClass, alPa, and numTimes fields is undefined. The enclosures array shows the drive enclosures available on the Fibre Channel port identified in the cerpId field. The location of an available drive enclosure is determined by the content of the enclosures.denclNum field as follows: - If enclosures.denclNum is less than 99, the location is as indicated by the content of the enclosures.rackNum and enclosures.denclNum fields.
- If enclosures.denclNum is equal to 99, the enclosures array entry is not used. Note that the content of the enclosures.rackNum field is undefined in this case.
- If enclosures.denclNum is greater than 99, the HSV110 controller does not have proof of the current location but the last known location is indicated by the content of the enclosures.rackNum and enclosures.denclNum fields. Subtract 100 from the content of those fields to determine the actual last known location. If there have been no configuration changes, the last known location values will be accurate.
Note that the content of the enclosures.rackNum field will not be valid until a future release."
--#TYPE "StorageCell Event"
--#SUMMARY "SCellName-TimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."
--#ARGUMENTS {0,1,2,3,4,}
--#SEVERITY CRITICAL
--#TIMEINDEX 136
--#STATE WARNING
::= 13601575
sCellEventTrap628 TRAP-TYPE -- CAC Code: 0
ENTERPRISE compaq
VARIABLES { scellNameDateTime,
scellSWComponent,
scellECode,
scellCAC,
scellEIP}
DESCRIPTION
"Severity: Normal -- informational in nature. The retry count for an OB task assigned to a Drive Enclosure Environmental Monitoring Unit has been exhausted. The Fibre Channel port used to communicate with the physical disk drive is contained in the cerpId field. The HSV110 controller internal Fibre Channel port number used to communicate with the physical disk drive is contained in the port field. The peb array contains the task list that was intended to be sent to the Drive Enclosure Environmental Monitoring Unit. The peqFrzProdIndex field contains the task that was being retried. The peqProdIndex field contains the drive enclosure where the physical disk drive used to communicate with the Drive Enclosure Environmental Monitoring Unit is located. The peqConsIndex field identifies the Fibre Channel loop pair (0 = Loop A, 1 = Loop B) used to communicate with the physical disk drive that was used to communicate with the Drive Enclosure Environmental Monitoring Unit. The failureCause field contains the bay where the physical disk drive used to communicate with the Drive Enclosure Environmental Monitoring Unit."
--#TYPE "StorageCell Event"
--#SUMMARY "SCellName-TimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."
--#ARGUMENTS {0,1,2,3,4,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
--#STATE WARNING
::= 13601576
sCellEventTrap629 TRAP-TYPE -- CAC Code: 0
ENTERPRISE compaq
VARIABLES { scellNameDateTime,
scellSWComponent,
scellECode,
scellCAC,
scellEIP}
DESCRIPTION
"Severity: Normal -- informational in nature. The HSV110 controller has sent a Basic Link Service command Abort Sequence Frame. The original work is described in this event. The identity of the intended target is contained in the device field. The Fibre Channel port over which the work was sent is identified in the cerpId field. The HSV110 controller internal Fibre Channel port over which the work was sent is contained in the port field. The arbitrated loop physical address of the intended target is contained in the alPa field. The location of the intended target is determined by the content of the denclNum field as follows: - If denclNum is less than 99, the location is as indicated by the content of the rackNum, denclNum, and bay fields.
- If denclNum is equal to 99, the location is unknown. Note that the content of the rackNum and bay fields is undefined in this case.
- If denclNum is greater than 99, the HSV110 controller does not have proof of the current location but the last known location is indicated by the content of the rackNum, denclNum, and bay fields. Subtract 100 from the content of those fields to determine the actual last known location. If there have been no configuration changes, the last known location values will be accurate. The identity contained in the device field should be used to confirm the last known location values.
Note that the content of the rackNum field will not be valid until a future release. The Fibre Channel Exchange Descriptor class is contained in the fedClass field. The command issued to the intended target is contained in the cmd field. Note that in this case the content of the error field is undefined. The enclosures array shows the drive enclosures available on the Fibre Channel port identified in the cerpId field. The location of an available drive enclosure is determined by the content of the enclosures.denclNum field as follows: - If enclosures.denclNum is less than 99, the location is as indicated by the content of the enclosures.rackNum and enclosures.denclNum fields.
- If enclosures.denclNum is equal to 99, the enclosures array entry is not used. Note that the content of the enclosures.rackNum field is undefined in this case.
- If enclosures.denclNum is greater than 99, the HSV110 controller does not have proof of the current location but the last known location is indicated by the content of the enclosures.rackNum and enclosures.denclNum fields. Subtract 100 from the content of those fields to determine the actual last known location. If there have been no configuration changes, the last known location values will be accurate.
Note that the content of the enclosures.rackNum field will not be valid until a future release."
--#TYPE "StorageCell Event"
--#SUMMARY "SCellName-TimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."
--#ARGUMENTS {0,1,2,3,4,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
--#STATE WARNING
::= 13601577
sCellEventTrap62a TRAP-TYPE -- CAC Code: 0
ENTERPRISE compaq
VARIABLES { scellNameDateTime,
scellSWComponent,
scellECode,
scellCAC,
scellEIP}
DESCRIPTION
"Severity: Normal -- informational in nature. The HSV110 controller has sent an Extended Link Service command Reinstate Recovery Qualifier. The original work is described in this event. The identity of the intended target is contained in the device field. The Fibre Channel port over which the work was sent is identified in the cerpId field. The HSV110 controller internal Fibre Channel port over which the work was sent is contained in the port field. The arbitrated loop physical address of the intended target is contained in the alPa field. The location of the intended target is determined by the content of the denclNum field as follows: - If denclNum is less than 99, the location is as indicated by the content of the rackNum, denclNum, and bay fields.
- If denclNum is equal to 99, the location is unknown. Note that the content of the rackNum and bay fields is undefined in this case.
- If denclNum is greater than 99, the HSV110 controller does not have proof of the current location but the last known location is indicated by the content of the rackNum, denclNum, and bay fields. Subtract 100 from the content of those fields to determine the actual last known location. If there have been no configuration changes, the last known location values will be accurate. The identity contained in the device field should be used to confirm the last known location values.
Note that the content of the rackNum field will not be valid until a future release. The Fibre Channel Exchange Descriptor class is contained in the fedClass field. The command issued to the intended target is contained in the cmd field. Note that in this case the content of the error field is undefined. The enclosures array shows the drive enclosures available on the Fibre Channel port identified in the cerpId field. The location of an available drive enclosure is determined by the content of the enclosures.denclNum field as follows: - If enclosures.denclNum is less than 99, the location is as indicated by the content of the enclosures.rackNum and enclosures.denclNum fields.
- If enclosures.denclNum is equal to 99, the enclosures array entry is not used. Note that the content of the enclosures.rackNum field is undefined in this case.
- If enclosures.denclNum is greater than 99, the HSV110 controller does not have proof of the current location but the last known location is indicated by the content of the enclosures.rackNum and enclosures.denclNum fields. Subtract 100 from the content of those fields to determine the actual last known location. If there have been no configuration changes, the last known location values will be accurate.
Note that the content of the enclosures.rackNum field will not be valid until a future release."
--#TYPE "StorageCell Event"
--#SUMMARY "SCellName-TimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."
--#ARGUMENTS {0,1,2,3,4,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
--#STATE WARNING
::= 13601578
sCellEventTrap62b TRAP-TYPE -- CAC Code: 40
ENTERPRISE compaq
VARIABLES { scellNameDateTime,
scellSWComponent,
scellECode,
scellCAC,
scellEIP}
DESCRIPTION
"Severity: Critical -- failure or failure imminent. A physical disk drive was bypassed rendering it unusable. The physical disk drive is unusable because a Drive Enclosure Environmental Monitoring Unit bypassed a drive bay or the physical disk drive left itself bypassed. The physical disk drive is not available to the HSV110 controllers and will not be displayed by the HSV element manager GUI. The physical disk drive fault led will be lit to indicate that it is unusable. The Fibre Channel port over which this condition was detected is identified in the cerpId field. The HSV110 controller internal Fibre Channel port over which this condition was detected is contained in the port field. The alPa field is invalid. The location of the physical disk drive is as indicated by the content of the rackNum, denclNum, and bay fields. Note that the content of the rackNum field will not be valid until a future release. The bypassReason field is used to indicate how the physical disk drive was bypassed: - 1 = The physical disk drive left itself bypassed
- 2 = The Drive Enclosure Environmental Monitoring Unit bypassed the drive bay
The Drive Enclosure Environmental Monitoring Unit is identified in the device field. Additionally, the content of the pid, rev, and enclosures array fields is undefined in this case."
--#TYPE "StorageCell Event"
--#SUMMARY "SCellName-TimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."
--#ARGUMENTS {0,1,2,3,4,}
--#SEVERITY CRITICAL
--#TIMEINDEX 136
--#STATE WARNING
::= 13601579
sCellEventTrap62c TRAP-TYPE -- CAC Code: 0
ENTERPRISE compaq
VARIABLES { scellNameDateTime,
scellSWComponent,
scellECode,
scellCAC,
scellEIP}
DESCRIPTION
"Severity: Normal -- informational in nature. One or more media defects were detected on a physical disk drive. The affected physical disk drive is identified in the device field. The Fibre Channel port over which the media defect(s) was detected is identified in the cerpId field. The HSV110 controller internal Fibre Channel port number over which the media defect(s) was detected is contained in the port field. The arbitrated loop physical address of the physical disk drive is contained in the alPa field. The Logical Block Address of each media defect is contained in a separate entry of the hdrCdb array. Only nonzero values in the hdrCdb array entries are valid. The location of the physical disk drive is determined by the content of the denclNum field as follows: - If denclNum is less than 99, the location is as indicated by the content of the rackNum, denclNum, and bay fields.
- If denclNum is equal to 99, the location is unknown. Note that the content of the rackNum and bay fields is undefined in this case.
- If denclNum is greater than 99, the HSV110 controller does not have proof of the current location but the last known location is indicated by the content of the rackNum, denclNum, and bay fields. Subtract 100 from the content of those fields to determine the actual last known location. If there have been no configuration changes, the last known location values will be accurate. The identity contained in the device field should be used to confirm the last known location values.
Note that the content of the rackNum field will not be valid until a future release."
--#TYPE "StorageCell Event"
--#SUMMARY "SCellName-TimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."
--#ARGUMENTS {0,1,2,3,4,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
--#STATE WARNING
::= 13601580
sCellEventTrap62d TRAP-TYPE -- CAC Code: 0
ENTERPRISE compaq
VARIABLES { scellNameDateTime,
scellSWComponent,
scellECode,
scellCAC,
scellEIP}
DESCRIPTION
"Severity: Normal -- informational in nature. An HSV110 controller issued a directed LIP to an arbitrated loop physical address. The Fibre Channel port over which the directed LIP was issued is identified in the cerpId field. The HSV110 controller internal Fibre Channel port number over which the directed LIP was issued is contained in the port field. The arbitrated loop physical address of the physical disk drive is contained in the alPa field."
--#TYPE "StorageCell Event"
--#SUMMARY "SCellName-TimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."
--#ARGUMENTS {0,1,2,3,4,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
--#STATE WARNING
::= 13601581
sCellEventTrap62e TRAP-TYPE -- CAC Code: 0
ENTERPRISE compaq
VARIABLES { scellNameDateTime,
scellSWComponent,
scellECode,
scellCAC,
scellEIP}
DESCRIPTION
"Severity: Normal -- informational in nature. An HSV110 controller has detected Loop Receiver Failures. The Fibre Channel port over which the Loop Receiver Failures were detected is identified in the cerpId field. The HSV110 controller internal Fibre Channel port number over which the Loop Receiver Failures were detected is contained in the port field. The counts and the ALPAs of the Loop Receiver Failures are contained in a separate entry of the hdrCdb array. Only nonzero values in the hdrCdb array entries are valid. The affected HSV110 controller is identified in the device field. Note that in this case the content of the alPa, denclNum, bay, and rackNum fields are undefined."
--#TYPE "StorageCell Event"
--#SUMMARY "SCellName-TimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."
--#ARGUMENTS {0,1,2,3,4,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
--#STATE WARNING
::= 13601582
sCellEventTrap630 TRAP-TYPE -- CAC Code: 4e
ENTERPRISE compaq
VARIABLES { scellNameDateTime,
scellSWComponent,
scellECode,
scellCAC,
scellEIP}
DESCRIPTION
"Severity: Critical -- failure or failure imminent. A HSV110 controller has detected only one port of all Fibre Channel devices in an enclosure. These Fibre Channel devices have entered the Single Port on Fibre state which should be corrected as soon as possible. The identity of the Fibre Channel device enclosure is contained in the device field. The Fibre Channel port still able to communicate with the Fibre Channel device is contained in the cerpId field. The HSV110 controller internal Fibre Channel port number able to communicate with the Fibre Channel device is contained in the port field. The Fibre Channel port unable to communicate with the Fibre Channel device is contained in the missingCerpId field. The HSV110 controller internal Fibre Channel port number unable to communicate with the Fibre Channel device is contained in the missingPort field. The alPa and bay fields are invalid. The location of the Fibre Channel enclosure is determined by the content of the denclNum field as follows: - If denclNum is less than 99, the location is as indicated by the content of the rackNum and denclNum fields.
- If denclNum is equal to 99, the location is unknown. Note that the content of the rackNum field is undefined in this case.
- If denclNum is greater than 99, the HSV110 controller does not have proof of the current location but the last known location is indicated by the content of the rackNum and denclNum fields. Subtract 100 from the content of those fields to determine the actual last known location. If there have been no configuration changes, the last known location values will be accurate. The identity contained in the device field should be used to confirm the last known location values.
Note that the content of the rackNum field will not be valid until a future release. Note also that in this case the content of the fedClass, and numTimes fields is undefined. The enclosures array shows the drive enclosures available on the Fibre Channel port identified in the cerpId field. The location of an available drive enclosure is determined by the content of the enclosures.denclNum field as follows: - If enclosures.denclNum is less than 99, the location is as indicated by the content of the enclosures.rackNum and enclosures.denclNum fields.
- If enclosures.denclNum is equal to 99, the enclosures array entry is not used. Note that the content of the enclosures.rackNum field is undefined in this case.
- If enclosures.denclNum is greater than 99, the HSV110 controller does not have proof of the current location but the last known location is indicated by the content of the enclosures.rackNum and enclosures.denclNum fields. Subtract 100 from the content of those fields to determine the actual last known location. If there have been no configuration changes, the last known location values will be accurate.
Note that the content of the enclosures.rackNum field will not be valid until a future release."
--#TYPE "StorageCell Event"
--#SUMMARY "SCellName-TimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."
--#ARGUMENTS {0,1,2,3,4,}
--#SEVERITY CRITICAL
--#TIMEINDEX 136
--#STATE WARNING
::= 13601584
sCellEventTrap631 TRAP-TYPE -- CAC Code: 0
ENTERPRISE compaq
VARIABLES { scellNameDateTime,
scellSWComponent,
scellECode,
scellCAC,
scellEIP}
DESCRIPTION
"Severity: Normal -- informational in nature. A previously reported Fibre Channel device enclosure with only one port has been corrected and redundancy has been restored. The devices in the enclosure are no longer in the Single Port on Fibre state. The identity of the Fibre Channel device enclosure is contained in the device field. The Fibre Channel port used to communicate with the Fibre Channel device enclosure is contained in the cerpId field. The HSV110 controller internal Fibre Channel port number used to communicate with the Fibre Channel device is contained in the port field. The alPa, bay, missingPort, and missingCerpId fields are invalid. The location of the Fibre Channel device is determined by the content of the denclNum field as follows: - If denclNum is less than 99, the location is as indicated by the content of the rackNum and denclNum fields.
- If denclNum is equal to 99, the location is unknown. Note that the content of the rackNum field is undefined in this case.
- If denclNum is greater than 99, the HSV110 controller does not have proof of the current location but the last known location is indicated by the content of the rackNum and denclNum fields. Subtract 100 from the content of those fields to determine the actual last known location. If there have been no configuration changes, the last known location values will be accurate. The identity contained in the device field should be used to confirm the last known location values.
Note that the content of the rackNum field will not be valid until a future release. Note also that in this case the content of the fedClass, and numTimes fields is undefined. The enclosures array shows the drive enclosures available on the Fibre Channel port identified in the cerpId field. The location of an available drive enclosure is determined by the content of the enclosures.denclNum field as follows: - If enclosures.denclNum is less than 99, the location is as indicated by the content of the enclosures.rackNum and enclosures.denclNum fields.
- If enclosures.denclNum is equal to 99, the enclosures array entry is not used. Note that the content of the enclosures.rackNum field is undefined in this case.
- If enclosures.denclNum is greater than 99, the HSV110 controller does not have proof of the current location but the last known location is indicated by the content of the enclosures.rackNum and enclosures.denclNum fields. Subtract 100 from the content of those fields to determine the actual last known location. If there have been no configuration changes, the last known location values will be accurate.
Note that the content of the enclosures.rackNum field will not be valid until a future release."
--#TYPE "StorageCell Event"
--#SUMMARY "SCellName-TimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."
--#ARGUMENTS {0,1,2,3,4,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
--#STATE WARNING
::= 13601585
sCellEventTrap632 TRAP-TYPE -- CAC Code: 4e
ENTERPRISE compaq
VARIABLES { scellNameDateTime,
scellSWComponent,
scellECode,
scellCAC,
scellEIP}
DESCRIPTION
"Severity: Critical -- failure or failure imminent. A HSV110 controller has detected only one port of all Fibre Channel devices on a loop. These Fibre Channel devices have entered the Single Port on Fibre state which should be corrected as soon as possible. The device, alPa, denclNum, and bay fields are all invalid. The Fibre Channel port still able to communicate with the Fibre Channel device is contained in the cerpId field. The HSV110 controller internal Fibre Channel port number able to communicate with the Fibre Channel device is contained in the port field. The Fibre Channel port unable to communicate with the Fibre Channel device is contained in the missingCerpId field. The HSV110 controller internal Fibre Channel port number unable to communicate with the Fibre Channel device is contained in the missingPort field."
--#TYPE "StorageCell Event"
--#SUMMARY "SCellName-TimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."
--#ARGUMENTS {0,1,2,3,4,}
--#SEVERITY CRITICAL
--#TIMEINDEX 136
--#STATE WARNING
::= 13601586
sCellEventTrap633 TRAP-TYPE -- CAC Code: 0
ENTERPRISE compaq
VARIABLES { scellNameDateTime,
scellSWComponent,
scellECode,
scellCAC,
scellEIP}
DESCRIPTION
"Severity: Normal -- informational in nature. A previously reported Fibre Channel loop with only one port has been corrected and redundancy has been restored. The devices on the loop are no longer in the Single Port on Fibre state. The device, alPa, denclNum, bay, missingPort, and missingCerpId fields are invalid. The Fibre Channel port used to communicate with the Fibre Channel devices is contained in the cerpId field. The HSV110 controller internal Fibre Channel port number used to communicate with the Fibre Channel devices is contained in the port field."
--#TYPE "StorageCell Event"
--#SUMMARY "SCellName-TimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."
--#ARGUMENTS {0,1,2,3,4,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
--#STATE WARNING
::= 13601587
sCellEventTrap634 TRAP-TYPE -- CAC Code: 0
ENTERPRISE compaq
VARIABLES { scellNameDateTime,
scellSWComponent,
scellECode,
scellCAC,
scellEIP}
DESCRIPTION
"Severity: Normal -- informational in nature. A HSV110 controller has been told to enable a device port, and that device port was not disabled during boot diagnostics. The Fibre Channel port that was enabled is contained in the cerpId field. The HSV110 controller internal Fibre Channel port number enabled is contained in the port field. Note that in this case the contents of the bay, rackNum, fedClass, alPa, denclNum, device, enclosure array, and numTimes fields are undefined. The missingPort and missingCerpId fields are unused."
--#TYPE "StorageCell Event"
--#SUMMARY "SCellName-TimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."
--#ARGUMENTS {0,1,2,3,4,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
--#STATE WARNING
::= 13601588
sCellEventTrap635 TRAP-TYPE -- CAC Code: 4d
ENTERPRISE compaq
VARIABLES { scellNameDateTime,
scellSWComponent,
scellECode,
scellCAC,
scellEIP}
DESCRIPTION
"Severity: Critical -- failure or failure imminent. An unrecognized Fibre Channel physical disk drive firmware revision has been detected by the physical disk drive firmware load process. The identity of the physical disk drive is contained in the device field. The Fibre Channel port used to communicate with the physical disk drive is contained in the cerpId field. The HSV110 controller internal Fibre Channel port number used to communicate with the physical disk drive is contained in the port field. The arbitrated loop physical address of the physical disk drive is contained in the alPa field. The bypassReason field is invalid. The location of the physical disk drive is determined by the content of the denclNum field as follows: - If denclNum is less than 99, the location is as indicated by the content of the rackNum, denclNum, and bay fields.
- If denclNum is equal to 99, the location is unknown. Note that the content of the rackNum, alPa and bay fields is undefined in this case.
- If denclNum is greater than 99, the HSV110 controller does not have proof of the current location but the last known location is indicated by the content of the rackNum, denclNum, and bay fields. Subtract 100 from the content of those fields to determine the actual last known location. If there have been no configuration changes, the last known location values will be accurate. The identity contained in the device field should be used to confirm the last known location values.
Note that the content of the rackNum field will not be valid until a future release. The pid field contains the SCSI Inquiry Product Identification obtained from the physical disk drive. The rev field contains the current firmware revision obtained from the physical disk drive. The newRev field contains the latest firmware version known to the controller, or blanks if the isn't a known version. The enclosures array shows the drive enclosures available on the Fibre Channel port identified in the cerpId field. The location of an available drive enclosure is determined by the content of the enclosures.denclNum field as follows: - If enclosures.denclNum is less than 99, the location is as indicated by the content of the enclosures.rackNum and enclosures.denclNum fields.
- If enclosures.denclNum is equal to 99, the enclosures array entry is not used. Note that the content of the enclosures.rackNum field is undefined in this case.
- If enclosures.denclNum is greater than 99, the HSV110 controller does not have proof of the current location but the last known location is indicated by the content of the enclosures.rackNum and enclosures.denclNum fields. Subtract 100 from the content of those fields to determine the actual last known location. If there have been no configuration changes, the last known location values will be accurate.
Note that the content of the enclosures.rackNum field will not be valid until a future release."
--#TYPE "StorageCell Event"
--#SUMMARY "SCellName-TimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."
--#ARGUMENTS {0,1,2,3,4,}
--#SEVERITY CRITICAL
--#TIMEINDEX 136
--#STATE WARNING
::= 13601589
sCellEventTrap636 TRAP-TYPE -- CAC Code: 4d
ENTERPRISE compaq
VARIABLES { scellNameDateTime,
scellSWComponent,
scellECode,
scellCAC,
scellEIP}
DESCRIPTION
"Severity: Critical -- failure or failure imminent. An unsupported Fibre Channel physical disk drive firmware revision has been detected by the physical disk drive firmware load process. The identity of the physical disk drive is contained in the device field. The Fibre Channel port used to communicate with the physical disk drive is contained in the cerpId field. The HSV110 controller internal Fibre Channel port number used to communicate with the physical disk drive is contained in the port field. The arbitrated loop physical address of the physical disk drive is contained in the alPa field. The bypassReason field is invalid. The location of the physical disk drive is determined by the content of the denclNum field as follows: - If denclNum is less than 99, the location is as indicated by the content of the rackNum, denclNum, and bay fields.
- If denclNum is equal to 99, the location is unknown. Note that the content of the rackNum, alPa and bay fields is undefined in this case.
- If denclNum is greater than 99, the HSV110 controller does not have proof of the current location but the last known location is indicated by the content of the rackNum, denclNum, and bay fields. Subtract 100 from the content of those fields to determine the actual last known location. If there have been no configuration changes, the last known location values will be accurate. The identity contained in the device field should be used to confirm the last known location values.
Note that the content of the rackNum field will not be valid until a future release. The pid field contains the SCSI Inquiry Product Identification obtained from the physical disk drive. The rev field contains the current firmware revision obtained from the physical disk drive. The newRev field contains the latest firmware version known to the controller, or blanks if the isn't a known version. The enclosures array shows the drive enclosures available on the Fibre Channel port identified in the cerpId field. The location of an available drive enclosure is determined by the content of the enclosures.denclNum field as follows: - If enclosures.denclNum is less than 99, the location is as indicated by the content of the enclosures.rackNum and enclosures.denclNum fields.
- If enclosures.denclNum is equal to 99, the enclosures array entry is not used. Note that the content of the enclosures.rackNum field is undefined in this case.
- If enclosures.denclNum is greater than 99, the HSV110 controller does not have proof of the current location but the last known location is indicated by the content of the enclosures.rackNum and enclosures.denclNum fields. Subtract 100 from the content of those fields to determine the actual last known location. If there have been no configuration changes, the last known location values will be accurate.
Note that the content of the enclosures.rackNum field will not be valid until a future release."
--#TYPE "StorageCell Event"
--#SUMMARY "SCellName-TimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."
--#ARGUMENTS {0,1,2,3,4,}
--#SEVERITY CRITICAL
--#TIMEINDEX 136
--#STATE WARNING
::= 13601590
sCellEventTrap637 TRAP-TYPE -- CAC Code: c4
ENTERPRISE compaq
VARIABLES { scellNameDateTime,
scellSWComponent,
scellECode,
scellCAC,
scellEIP}
DESCRIPTION
"Severity: Normal -- informational in nature. A Fibre Channel physical disk drive firmware revision has been detected by the physical disk drive firmware load process that is later than the latest known supported revision. If the location information is 0, it indicates the type of drive, not a specific drive. The identity of the physical disk drive is contained in the device field. The Fibre Channel port used to communicate with the physical disk drive is contained in the cerpId field. The HSV110 controller internal Fibre Channel port number used to communicate with the physical disk drive is contained in the port field. The arbitrated loop physical address of the physical disk drive is contained in the alPa field. The bypassReason field is invalid. The location of the physical disk drive is determined by the content of the denclNum field as follows: - If denclNum is less than 99, the location is as indicated by the content of the rackNum, denclNum, and bay fields.
- If denclNum is equal to 99, the location is unknown. Note that the content of the rackNum, alPa and bay fields is undefined in this case.
- If denclNum is greater than 99, the HSV110 controller does not have proof of the current location but the last known location is indicated by the content of the rackNum, denclNum, and bay fields. Subtract 100 from the content of those fields to determine the actual last known location. If there have been no configuration changes, the last known location values will be accurate. The identity contained in the device field should be used to confirm the last known location values.
Note that the content of the rackNum field will not be valid until a future release. The pid field contains the SCSI Inquiry Product Identification obtained from the physical disk drive. The rev field contains the current firmware revision obtained from the physical disk drive. The newRev field contains the latest firmware version known to the controller, or blanks if the isn't a known version. The enclosures array shows the drive enclosures available on the Fibre Channel port identified in the cerpId field. The location of an available drive enclosure is determined by the content of the enclosures.denclNum field as follows: - If enclosures.denclNum is less than 99, the location is as indicated by the content of the enclosures.rackNum and enclosures.denclNum fields.
- If enclosures.denclNum is equal to 99, the enclosures array entry is not used. Note that the content of the enclosures.rackNum field is undefined in this case.
- If enclosures.denclNum is greater than 99, the HSV110 controller does not have proof of the current location but the last known location is indicated by the content of the enclosures.rackNum and enclosures.denclNum fields. Subtract 100 from the content of those fields to determine the actual last known location. If there have been no configuration changes, the last known location values will be accurate.
Note that the content of the enclosures.rackNum field will not be valid until a future release."
--#TYPE "StorageCell Event"
--#SUMMARY "SCellName-TimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."
--#ARGUMENTS {0,1,2,3,4,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
--#STATE WARNING
::= 13601591
sCellEventTrap638 TRAP-TYPE -- CAC Code: c4
ENTERPRISE compaq
VARIABLES { scellNameDateTime,
scellSWComponent,
scellECode,
scellCAC,
scellEIP}
DESCRIPTION
"Severity: Normal -- informational in nature. A Fibre Channel physical disk drive firmware revision has been detected by the physical disk drive firmware load process that has a newer supported revision available. If the location information is 0, it indicates the type of drive, not a specific drive. The identity of the physical disk drive is contained in the device field. The Fibre Channel port used to communicate with the physical disk drive is contained in the cerpId field. The HSV110 controller internal Fibre Channel port number used to communicate with the physical disk drive is contained in the port field. The arbitrated loop physical address of the physical disk drive is contained in the alPa field. The bypassReason field is invalid. The location of the physical disk drive is determined by the content of the denclNum field as follows: - If denclNum is less than 99, the location is as indicated by the content of the rackNum, denclNum, and bay fields.
- If denclNum is equal to 99, the location is unknown. Note that the content of the rackNum, alPa and bay fields is undefined in this case.
- If denclNum is greater than 99, the HSV110 controller does not have proof of the current location but the last known location is indicated by the content of the rackNum, denclNum, and bay fields. Subtract 100 from the content of those fields to determine the actual last known location. If there have been no configuration changes, the last known location values will be accurate. The identity contained in the device field should be used to confirm the last known location values.
Note that the content of the rackNum field will not be valid until a future release. The pid field contains the SCSI Inquiry Product Identification obtained from the physical disk drive. The rev field contains the current firmware revision obtained from the physical disk drive. The newRev field contains the latest firmware version known to the controller, or blanks if the isn't a known version. The enclosures array shows the drive enclosures available on the Fibre Channel port identified in the cerpId field. The location of an available drive enclosure is determined by the content of the enclosures.denclNum field as follows: - If enclosures.denclNum is less than 99, the location is as indicated by the content of the enclosures.rackNum and enclosures.denclNum fields.
- If enclosures.denclNum is equal to 99, the enclosures array entry is not used. Note that the content of the enclosures.rackNum field is undefined in this case.
- If enclosures.denclNum is greater than 99, the HSV110 controller does not have proof of the current location but the last known location is indicated by the content of the enclosures.rackNum and enclosures.denclNum fields. Subtract 100 from the content of those fields to determine the actual last known location. If there have been no configuration changes, the last known location values will be accurate.
Note that the content of the enclosures.rackNum field will not be valid until a future release."
--#TYPE "StorageCell Event"
--#SUMMARY "SCellName-TimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."
--#ARGUMENTS {0,1,2,3,4,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
--#STATE WARNING
::= 13601592
sCellEventTrap639 TRAP-TYPE -- CAC Code: 0
ENTERPRISE compaq
VARIABLES { scellNameDateTime,
scellSWComponent,
scellECode,
scellCAC,
scellEIP}
DESCRIPTION
"Severity: Normal -- informational in nature. The HSV110 controller bypassed a device bay in an attempt to restore operability. The identity of the bay is indicated by the rackNum, denclNum, and bay fields. All other fields are invalid."
--#TYPE "StorageCell Event"
--#SUMMARY "SCellName-TimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."
--#ARGUMENTS {0,1,2,3,4,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
--#STATE WARNING
::= 13601593
sCellEventTrap63a TRAP-TYPE -- CAC Code: 0
ENTERPRISE compaq
VARIABLES { scellNameDateTime,
scellSWComponent,
scellECode,
scellCAC,
scellEIP}
DESCRIPTION
"Severity: Normal -- informational in nature. The HSV110 controller is attempting to recovery devices on the indicated port. All other fields are invalid."
--#TYPE "StorageCell Event"
--#SUMMARY "SCellName-TimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."
--#ARGUMENTS {0,1,2,3,4,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
--#STATE WARNING
::= 13601594
sCellEventTrap63b TRAP-TYPE -- CAC Code: 0
ENTERPRISE compaq
VARIABLES { scellNameDateTime,
scellSWComponent,
scellECode,
scellCAC,
scellEIP}
DESCRIPTION
"Severity: Normal -- informational in nature. The HSV110 controller has finished error recovery attempts on the indicated port. All other fields are invalid."
--#TYPE "StorageCell Event"
--#SUMMARY "SCellName-TimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."
--#ARGUMENTS {0,1,2,3,4,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
--#STATE WARNING
::= 13601595
sCellEventTrap63c TRAP-TYPE -- CAC Code: 0
ENTERPRISE compaq
VARIABLES { scellNameDateTime,
scellSWComponent,
scellECode,
scellCAC,
scellEIP}
DESCRIPTION
"Severity: Normal -- informational in nature. The HSV110 controller been requested to unbypass device bays on the indicated port. All other fields are invalid."
--#TYPE "StorageCell Event"
--#SUMMARY "SCellName-TimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."
--#ARGUMENTS {0,1,2,3,4,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
--#STATE WARNING
::= 13601596
sCellEventTrap63d TRAP-TYPE -- CAC Code: 9b
ENTERPRISE compaq
VARIABLES { scellNameDateTime,
scellSWComponent,
scellECode,
scellCAC,
scellEIP}
DESCRIPTION
"Severity: Undetermined -- more information needed to determine severity. The HSV110 controller has detected a enclosure on the CAB bus that does not have a Fibre Channel connection. All fields except port and rack are invalid. other fields are invalid."
--#TYPE "StorageCell Event"
--#SUMMARY "SCellName-TimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."
--#ARGUMENTS {0,1,2,3,4,}
--#SEVERITY CRITICAL
--#TIMEINDEX 136
--#STATE WARNING
::= 13601597
sCellEventTrap63e TRAP-TYPE -- CAC Code: c5
ENTERPRISE compaq
VARIABLES { scellNameDateTime,
scellSWComponent,
scellECode,
scellCAC,
scellEIP}
DESCRIPTION
"Severity: Critical -- failure or failure imminent. The HSV110 controller has detected an enclosure on the Fibre Channel but is unable to communicate with the EMU on the CAB bus or the EMU is reporting an invalid enclosure number. All fields except port and rack are invalid. other fields are invalid."
--#TYPE "StorageCell Event"
--#SUMMARY "SCellName-TimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."
--#ARGUMENTS {0,1,2,3,4,}
--#SEVERITY CRITICAL
--#TIMEINDEX 136
--#STATE WARNING
::= 13601598
sCellEventTrap70 TRAP-TYPE -- CAC Code: b5
ENTERPRISE compaq
VARIABLES { scellNameDateTime,
scellSWComponent,
scellECode,
scellCAC,
scellEIP}
DESCRIPTION
"Severity: Warning -- not failed but attention recommended or required. Allocation of a Virtual Disk has stalled due to insufficient space in the Disk Group caused by the failure or pulling of a physical disk drive. The tag1 field contains the identity of the Virtual Disk. The tag2 field contains the identity of the Disk Group. The values that may be found in the state field are as follows: - 0 = Attempting to retry the allocation
- 1 = Awaiting a leveling event (a drive needs to be inserted)
"
--#TYPE "StorageCell Event"
--#SUMMARY "SCellName-TimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."
--#ARGUMENTS {0,1,2,3,4,}
--#SEVERITY MINOR
--#TIMEINDEX 136
--#STATE WARNING
::= 13601792
sCellEventTrap71 TRAP-TYPE -- CAC Code: b5
ENTERPRISE compaq
VARIABLES { scellNameDateTime,
scellSWComponent,
scellECode,
scellCAC,
scellEIP}
DESCRIPTION
"Severity: Warning -- not failed but attention recommended or required. Expansion of a Virtual Disk has stalled due to insufficient space in the Disk Group caused by the failure or pulling of a physical disk drive. The tag1 field contains the identity of the Virtual Disk. The tag2 field contains the identity of the Disk Group. The values that may be found in the state field are as follows: - 0 = Attempting to retry the expansion
- 1 = Awaiting a leveling event (a drive needs to be inserted)
"
--#TYPE "StorageCell Event"
--#SUMMARY "SCellName-TimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."
--#ARGUMENTS {0,1,2,3,4,}
--#SEVERITY MINOR
--#TIMEINDEX 136
--#STATE WARNING
::= 13601793
sCellEventTrap72 TRAP-TYPE -- CAC Code: 0
ENTERPRISE compaq
VARIABLES { scellNameDateTime,
scellSWComponent,
scellECode,
scellCAC,
scellEIP}
DESCRIPTION
"Severity: Normal -- informational in nature. Leveling of capacity in a Disk Group has started. The identity of the Disk Group is contained in the tag1 field."
--#TYPE "StorageCell Event"
--#SUMMARY "SCellName-TimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."
--#ARGUMENTS {0,1,2,3,4,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
--#STATE WARNING
::= 13601794
sCellEventTrap73 TRAP-TYPE -- CAC Code: 0
ENTERPRISE compaq
VARIABLES { scellNameDateTime,
scellSWComponent,
scellECode,
scellCAC,
scellEIP}
DESCRIPTION
"Severity: Normal -- informational in nature. Leveling of capacity in a Disk Group has finished. The identity of the Disk Group is contained in the tag1 field."
--#TYPE "StorageCell Event"
--#SUMMARY "SCellName-TimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."
--#ARGUMENTS {0,1,2,3,4,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
--#STATE WARNING
::= 13601795
sCellEventTrap74 TRAP-TYPE -- CAC Code: 0
ENTERPRISE compaq
VARIABLES { scellNameDateTime,
scellSWComponent,
scellECode,
scellCAC,
scellEIP}
DESCRIPTION
"Severity: Normal -- informational in nature. A member management operation has started due to the appearance or disappearance of a physical disk drive. If available, the tag1 field contains the identity of the physical disk drive. The tag2 field contains the disk unit block in which physical disk drive resides. The values that may be found in the state field are as follows: - 2 = Reconstructing
- 4 = Migrating
- 6 = Reverting
"
--#TYPE "StorageCell Event"
--#SUMMARY "SCellName-TimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."
--#ARGUMENTS {0,1,2,3,4,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
--#STATE WARNING
::= 13601796
sCellEventTrap75 TRAP-TYPE -- CAC Code: 0
ENTERPRISE compaq
VARIABLES { scellNameDateTime,
scellSWComponent,
scellECode,
scellCAC,
scellEIP}
DESCRIPTION
"Severity: Normal -- informational in nature. A member management operation has finished. If available, the tag1 field contains the identity of the physical disk drive. The tag2 field contains the disk unit block in which the physical disk drive resides. The values that may be found in the state field are as follows: - 2 = Reconstructing
- 4 = Migrating
- 6 = Reverting
The status field contains one of the following values: - 1 = PSEGS NONE ( Reconstruction of data was successful )
- 2 = PSEGS RAID0 ( Could not reconstruct RAID0 data )
- 4 = PSEGS RAID5 ( Could not reconstruct RAID5 data )
- 8 = PSEGS RAID1 ( Could not reconstruct RAID1 data )
"
--#TYPE "StorageCell Event"
--#SUMMARY "SCellName-TimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."
--#ARGUMENTS {0,1,2,3,4,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
--#STATE WARNING
::= 13601797
sCellEventTrap76 TRAP-TYPE -- CAC Code: 0
ENTERPRISE compaq
VARIABLES { scellNameDateTime,
scellSWComponent,
scellECode,
scellCAC,
scellEIP}
DESCRIPTION
"Severity: Normal -- informational in nature. A Disk Group has started changing its internal structure due to the appearance or disappearance of a Volume. The identity of the Disk Group is contained in the tag1 field. The values that may be found in the state field are as follows: - 4 = Merge began
- 8 = Split began
"
--#TYPE "StorageCell Event"
--#SUMMARY "SCellName-TimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."
--#ARGUMENTS {0,1,2,3,4,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
--#STATE WARNING
::= 13601798
sCellEventTrap77 TRAP-TYPE -- CAC Code: 0
ENTERPRISE compaq
VARIABLES { scellNameDateTime,
scellSWComponent,
scellECode,
scellCAC,
scellEIP}
DESCRIPTION
"Severity: Normal -- informational in nature. A Disk Group has finished changing its internal structure due to the appearance or disappearance of a volume. The identity of the Disk Group is contained in the tag1 field. The values that may be found in the state field are as follows: - 4 = Merge completed
- 8 = Split completed
"
--#TYPE "StorageCell Event"
--#SUMMARY "SCellName-TimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."
--#ARGUMENTS {0,1,2,3,4,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
--#STATE WARNING
::= 13601799
sCellEventTrap78 TRAP-TYPE -- CAC Code: 0
ENTERPRISE compaq
VARIABLES { scellNameDateTime,
scellSWComponent,
scellECode,
scellCAC,
scellEIP}
DESCRIPTION
"Severity: Normal -- informational in nature. Deallocation of a Virtual Disk has failed after three attempts due to unknown circumstances. This will more than likely be caused by failing physical drives. The deletion will be restarted when a resync/reboot occurs. The tag1 field contains the identity of the Virtual Disk. The tag2 field contains the identity of the Disk Group. The values that may be found in the status field indicate the returned status from the delete operation."
--#TYPE "StorageCell Event"
--#SUMMARY "SCellName-TimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."
--#ARGUMENTS {0,1,2,3,4,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
--#STATE WARNING
::= 13601800
sCellEventTrap91 TRAP-TYPE -- CAC Code: 0
ENTERPRISE compaq
VARIABLES { scellNameDateTime,
scellSWComponent,
scellECode,
scellCAC,
scellEIP}
DESCRIPTION
"Severity: Normal -- informational in nature. The state of the Physical Disk Drive identified in the handle field has transitioned to the NORMAL state. The value.ul1 field contains the new state: 1 (NORMAL). The value.ul2 field contains the old state. The state values that may be in the value.ul2 field are as follows: - 2 = Degraded
- 3 = Failed
- 4 = Not present
- 5 = Single Port on Fibre
The enclosure number, bay number, and rack number where the Physical Disk Drive is located are contained in the attribute.value.u32[0], attribute.value.u32[1], attribute.value.u32[2] fields, respectively. The attribute.type field contains value 1. The rack number in the attribute.value.u32[2] field will not contain a valid value until a future release."
--#TYPE "StorageCell Event"
--#SUMMARY "SCellName-TimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."
--#ARGUMENTS {0,1,2,3,4,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
--#STATE WARNING
::= 13602305
sCellEventTrap92 TRAP-TYPE -- CAC Code: 0
ENTERPRISE compaq
VARIABLES { scellNameDateTime,
scellSWComponent,
scellECode,
scellCAC,
scellEIP}
DESCRIPTION
"Severity: Normal -- informational in nature. The state of a Volume has changed. The identity of the affected Volume is contained in the handle field. The addHandle field contains the identity of the Physical Disk Drive that is associated with that Volume. The enclosure number, bay number, and rack number where the associated Physical Disk Drive is located are contained in the attribute.value.u32[0], attribute.value.u32[1], and attribute.value.u32[2] fields, respectively. The internal identification of that Volume's Redundant Storage Set is contained in the attribute.value.u32[3] field. The attribute.type field contains the value of 1. The value.ul1 field contains the new state. The value.ul2 field contains the old state. The state values that may be found in the value.ul1 and value.ul2 fields are as follows: - 1 = Normal - Volume is present and operating normally
- 2 = Migrating - Data from this volume is being moved to other storage in this Disk Group
- 3 = Missing - Volume is inaccessible
- 4 = Reconstructing - Volume is inaccessible; redundant data is being regenerated and moved to other storage in this Disk Group
- 5 = Completing - This previously inaccessible volume has become accessible; data migration is being completed
- 6 = Reverting - This previously inaccessible volume has become accessible; data is being regenerated
- 7 = Failed - Volume is not being used in the Disk Group; disk errors are preventing normal usage
"
--#TYPE "StorageCell Event"
--#SUMMARY "SCellName-TimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."
--#ARGUMENTS {0,1,2,3,4,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
--#STATE WARNING
::= 13602306
sCellEventTrap93 TRAP-TYPE -- CAC Code: 0
ENTERPRISE compaq
VARIABLES { scellNameDateTime,
scellSWComponent,
scellECode,
scellCAC,
scellEIP}
DESCRIPTION
"Severity: Normal -- informational in nature. The state of the internal Logical Disk associated with the Virtual Disk identified in the handle field has changed. The value.ul1 field contains the new state. The value.ul2 field contains the old state. The state values that may be found in the value.ul1 and value.ul2 fields are as follows: - 1 = Normal
- 2 = Replacement delay in progress
- 3 = Redundancy lost, restore in progress
- 4 = Redundancy lost, restore stalled
- 5 = Failed
- 6 = Creation in progress
- 7 = Snapshot is inoperative due to lack of snapshot space
- 8 = Deletion in progress
- 9 = Capacity change in progress
- 10 = Inoperative due to data lost
- 11 = Capacity reservation in progress
- 12 = Capacity unreservation in progress
"
--#TYPE "StorageCell Event"
--#SUMMARY "SCellName-TimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."
--#ARGUMENTS {0,1,2,3,4,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
--#STATE WARNING
::= 13602307
sCellEventTrap94 TRAP-TYPE -- CAC Code: 0
ENTERPRISE compaq
VARIABLES { scellNameDateTime,
scellSWComponent,
scellECode,
scellCAC,
scellEIP}
DESCRIPTION
"Severity: Normal -- informational in nature. The state of the HSV110 controller identified in the handle field has transitioned to the NORMAL state. The value.ul1 field contains the new state: 1 (NORMAL). The value.ul2 field contains the old state: 3 (FAILED)."
--#TYPE "StorageCell Event"
--#SUMMARY "SCellName-TimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."
--#ARGUMENTS {0,1,2,3,4,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
--#STATE WARNING
::= 13602308
sCellEventTrap95 TRAP-TYPE -- CAC Code: 0
ENTERPRISE compaq
VARIABLES { scellNameDateTime,
scellSWComponent,
scellECode,
scellCAC,
scellEIP}
DESCRIPTION
"Severity: Normal -- informational in nature. The state of a battery assembly within the HSV110 controller identified in the handle field has changed. The value.ul1 field contains the new state. The value.ul2 field contains the old state. The state values that may be found in the value.ul1 and value.ul2 fields are as follows: - 1 = Battery System Hold-up Time is greater than 96 hours
- 3 = Battery System Hold-up Time is greater than 0 and less than 96 hours
- 5 = Battery System Hold-up Time is zero hours
"
--#TYPE "StorageCell Event"
--#SUMMARY "SCellName-TimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."
--#ARGUMENTS {0,1,2,3,4,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
--#STATE WARNING
::= 13602309
sCellEventTrap96 TRAP-TYPE -- CAC Code: bf
ENTERPRISE compaq
VARIABLES { scellNameDateTime,
scellSWComponent,
scellECode,
scellCAC,
scellEIP}
DESCRIPTION
"Severity: Undetermined -- more information needed to determine severity. A Volume has transitioned to the MISSING state. The affected Volume is identified in the handle field. The addHandle field contains the identity of the Physical Disk Drive that is associated with that Volume. The enclosure number, bay number, and rack number where the associated Physical Disk Drive is located are contained in the attribute.value.u32[0], attribute.value.u32[1], and attribute.value.u32[2] fields, respectively. The internal identification of that Volume's Redundant Storage Set is contained in the attribute.value.u32[3] field. The attribute.type field contains the value of 1. The value.ul1 field contains the new state. The value.ul2 field contains the old state. The state values that may be found in the value.ul1 and value.ul2 fields are as follows: - 1 = Normal - Volume is present and operating normally
- 2 = Migrating - Data from this volume is being moved to other storage in this Disk Group
- 4 = Reconstructing - Volume is inaccessible; redundant data is being regenerated and moved to other storage in this Disk Group
- 5 = Completing - This previously inaccessible volume has become accessible; data migration is being completed
- 6 = Reverting - This previously inaccessible volume has become accessible; data is being regenerated
- 7 = Failed - Volume is not being used in the Disk Group; disk errors are preventing normal usage
"
--#TYPE "StorageCell Event"
--#SUMMARY "SCellName-TimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."
--#ARGUMENTS {0,1,2,3,4,}
--#SEVERITY CRITICAL
--#TIMEINDEX 136
--#STATE WARNING
::= 13602310
sCellEventTrap97 TRAP-TYPE -- CAC Code: 0
ENTERPRISE compaq
VARIABLES { scellNameDateTime,
scellSWComponent,
scellECode,
scellCAC,
scellEIP}
DESCRIPTION
"Severity: Normal -- informational in nature. The state of the Fibre Channel port identified in the attribute.value.str field and located on the rear panel of the HSV110 controller identified in the handle field has transitioned to the NORMAL state. The attribute.type field contains the value 4. The value.ul1 field contains the new state: 1 (NORMAL). The value.ul2 field contains the old state: 2 (FAILED). Note that the HSV110 controller's internal identity of the affected Fibre Channel port is contained in the secondaryId field."
--#TYPE "StorageCell Event"
--#SUMMARY "SCellName-TimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."
--#ARGUMENTS {0,1,2,3,4,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
--#STATE WARNING
::= 13602311
sCellEventTrap98 TRAP-TYPE -- CAC Code: b4
ENTERPRISE compaq
VARIABLES { scellNameDateTime,
scellSWComponent,
scellECode,
scellCAC,
scellEIP}
DESCRIPTION
"Severity: Warning -- not failed but attention recommended or required. The Occupancy Alarm Level threshold has been reached for the Disk Group identified in the handle field."
--#TYPE "StorageCell Event"
--#SUMMARY "SCellName-TimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."
--#ARGUMENTS {0,1,2,3,4,}
--#SEVERITY MINOR
--#TIMEINDEX 136
--#STATE WARNING
::= 13602312
sCellEventTrap99 TRAP-TYPE -- CAC Code: 0
ENTERPRISE compaq
VARIABLES { scellNameDateTime,
scellSWComponent,
scellECode,
scellCAC,
scellEIP}
DESCRIPTION
"Severity: Normal -- informational in nature. The Resource Availability state of a Volume has transitioned to the SUFFICIENT state. The affected Volume is identified in the handle field. The addHandle field contains the identity of the Physical Disk Drive that is associated with that Volume. The enclosure number, bay number, and rack number where the associated Physical Disk Drive is located are contained in the attribute.value.u32[0], attribute.value.u32[1], and attribute.value.u32[2] fields, respectively. The internal identification of that Volume's Redundant Storage Set is contained in the attribute.value.u32[3] field. The attribute.type field contains the value of 1. The value.ul1 field contains the new state: 0 (SUFFICIENT). The value.ul2 field contains the old state: 1 (INSUFFICIENT)."
--#TYPE "StorageCell Event"
--#SUMMARY "SCellName-TimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."
--#ARGUMENTS {0,1,2,3,4,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
--#STATE WARNING
::= 13602313
sCellEventTrap9A TRAP-TYPE -- CAC Code: 0
ENTERPRISE compaq
VARIABLES { scellNameDateTime,
scellSWComponent,
scellECode,
scellCAC,
scellEIP}
DESCRIPTION
"Severity: Normal -- informational in nature. The Data Availability state of the internal Logical Disk associated with the Virtual Disk identified in the handle field has transitioned to the NORMAL state. The value.ul1 field contains the new state: 0 (NORMAL). The value.ul2 field contains the old state: 1 (DATA LOST)."
--#TYPE "StorageCell Event"
--#SUMMARY "SCellName-TimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."
--#ARGUMENTS {0,1,2,3,4,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
--#STATE WARNING
::= 13602314
sCellEventTrap9C TRAP-TYPE -- CAC Code: 0
ENTERPRISE compaq
VARIABLES { scellNameDateTime,
scellSWComponent,
scellECode,
scellCAC,
scellEIP}
DESCRIPTION
"Severity: Normal -- informational in nature. The Snapclone Logical Disk identified in the handle field has completed the unsharing operation. The secondaryId field contains the noid of the associated successor internal Logical Disk."
--#TYPE "StorageCell Event"
--#SUMMARY "SCellName-TimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."
--#ARGUMENTS {0,1,2,3,4,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
--#STATE WARNING
::= 13602316
sCellEventTrap9D TRAP-TYPE -- CAC Code: 0
ENTERPRISE compaq
VARIABLES { scellNameDateTime,
scellSWComponent,
scellECode,
scellCAC,
scellEIP}
DESCRIPTION
"Severity: Normal -- informational in nature. The state of the Quorum Disk flag of a Volume has changed. The affected Volume is identified in the handle field. The value.ul1 field contains the new state of the Quorum Disk flag. The value.ul2 field contains the old state of the Quorum Disk flag. The state values that may be found in the value.ul1 and value.ul2 fields are as follows:
- 0 = Not quorum disk
- 1 = Quorum disk
"
--#TYPE "StorageCell Event"
--#SUMMARY "SCellName-TimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."
--#ARGUMENTS {0,1,2,3,4,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
--#STATE WARNING
::= 13602317
sCellEventTrap9E TRAP-TYPE -- CAC Code: 36
ENTERPRISE compaq
VARIABLES { scellNameDateTime,
scellSWComponent,
scellECode,
scellCAC,
scellEIP}
DESCRIPTION
"Severity: Critical -- failure or failure imminent. The temperature trip point for a temperature sensor located within an HSV110 controller has been reached. The HSV110 controller is identified in the handle field. The value.ul1 field contains the current temperature reading from I2C sensor 1 in degrees celsius while the value.ul2 field contains the adjusted reading from I2C sensor 2. The set temperature trip point is contained in the secondaryId field."
--#TYPE "StorageCell Event"
--#SUMMARY "SCellName-TimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."
--#ARGUMENTS {0,1,2,3,4,}
--#SEVERITY CRITICAL
--#TIMEINDEX 136
--#STATE WARNING
::= 13602318
sCellEventTrap9F TRAP-TYPE -- CAC Code: 2e
ENTERPRISE compaq
VARIABLES { scellNameDateTime,
scellSWComponent,
scellECode,
scellCAC,
scellEIP}
DESCRIPTION
"Severity: Warning -- not failed but attention recommended or required. The temperature within the HSV110 controller identified in the handle field is approaching its trip point. The value.ul1 field contains the current temperature reading from I2C sensor 1 in degrees celsius while the value.ul2 field contains the adjusted reading from I2C sensor 2. The secondaryId field contains the set temperature trip point in Celsius."
--#TYPE "StorageCell Event"
--#SUMMARY "SCellName-TimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."
--#ARGUMENTS {0,1,2,3,4,}
--#SEVERITY MINOR
--#TIMEINDEX 136
--#STATE WARNING
::= 13602319
sCellEventTrap911 TRAP-TYPE -- CAC Code: 0
ENTERPRISE compaq
VARIABLES { scellNameDateTime,
scellSWComponent,
scellECode,
scellCAC,
scellEIP}
DESCRIPTION
"Severity: Normal -- informational in nature. The Blower Present flag for the '1' blower assembly located within the HSV110 controller identified in the handle field has transitioned from the NOT PRESENT to PRESENT state indicating that the blower has been reinstalled. The secondaryId field contains the '1' blower assembly internal identifier value: 1. The value.ul1 field contains the new state of the Blower Present flag: 1 (PRESENT). The value.ul2 field contains the old state of the Blower Present flag: 0 (NOT PRESENT)."
--#TYPE "StorageCell Event"
--#SUMMARY "SCellName-TimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."
--#ARGUMENTS {0,1,2,3,4,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
--#STATE WARNING
::= 13602321
sCellEventTrap912 TRAP-TYPE -- CAC Code: 24
ENTERPRISE compaq
VARIABLES { scellNameDateTime,
scellSWComponent,
scellECode,
scellCAC,
scellEIP}
DESCRIPTION
"Severity: Critical -- failure or failure imminent. The '1' blower located within the HSV110 controller identified in the handle field is running slower than the lowest acceptable speed. The secondaryId field contains the '1' blower assembly internal identifier value: 1. The value.ul1 field contains the current speed of the '1' blower. The value.ul2 field contains the lowest acceptable speed for the '1' blower."
--#TYPE "StorageCell Event"
--#SUMMARY "SCellName-TimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."
--#ARGUMENTS {0,1,2,3,4,}
--#SEVERITY CRITICAL
--#TIMEINDEX 136
--#STATE WARNING
::= 13602322
sCellEventTrap913 TRAP-TYPE -- CAC Code: 0
ENTERPRISE compaq
VARIABLES { scellNameDateTime,
scellSWComponent,
scellECode,
scellCAC,
scellEIP}
DESCRIPTION
"Severity: Normal -- informational in nature. One of the voltage sensors located within the HSV110 controller identified in the handle field has reported a voltage that is out of range. The value.ul1 field contains the out of range voltage value. The secondaryId field contains the specific voltage threshold value (i.e., 12V, 5V, 3.3V, 2.5V or 2V). Note that the voltages are expressed in millivolts--e.g.,12.5V is expressed as 12500."
--#TYPE "StorageCell Event"
--#SUMMARY "SCellName-TimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."
--#ARGUMENTS {0,1,2,3,4,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
--#STATE WARNING
::= 13602323
sCellEventTrap914 TRAP-TYPE -- CAC Code: bf
ENTERPRISE compaq
VARIABLES { scellNameDateTime,
scellSWComponent,
scellECode,
scellCAC,
scellEIP}
DESCRIPTION
"Severity: Undetermined -- more information needed to determine severity. The state of a Volume has transitioned to the FAILED state. The affected Volume is identified in the handle field. The addHandle field contains the identity of the Physical Disk Drive that is associated with that Volume. The enclosure number, bay number, and rack number where the associated Physical Disk Drive is located are contained in the attribute.value.u32[0], attribute.value.u32[1], and attribute.value.u32[2] fields, respectively. The internal identification of that Volume's Redundant Storage Set is contained in the attribute.value.u32[3] field. The attribute.type field contains the value of 1. The value.ul1 field contains the new state: 7 (FAILED). The value.ul2 field contains the old state. The state values that may be found in the value.ul2 fields are as follows: - 1 = Normal - Volume is present and operating normally
- 2 = Migrating - Data from this volume is being moved to other storage in this Disk Group
- 3 = Missing - Volume is inaccessible
- 4 = Reconstructing - Volume is inaccessible; redundant data is being regenerated and moved to other storage in this Disk Group
- 5 = Completing - This previously inaccessible volume has become accessible; data migration is being completed
- 6 = Reverting - This previously inaccessible volume has become accessible; data is being regenerated
"
--#TYPE "StorageCell Event"
--#SUMMARY "SCellName-TimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."
--#ARGUMENTS {0,1,2,3,4,}
--#SEVERITY CRITICAL
--#TIMEINDEX 136
--#STATE WARNING
::= 13602324
sCellEventTrap915 TRAP-TYPE -- CAC Code: b9
ENTERPRISE compaq
VARIABLES { scellNameDateTime,
scellSWComponent,
scellECode,
scellCAC,
scellEIP}
DESCRIPTION
"Severity: Undetermined -- more information needed to determine severity. An HSV110 controller has failed. The state of the HSV110 controller identified in the handle field has transitioned to the FAILED state. The value.ul1 field contains the new state: 3 (FAILED). The value.ul2 field contains the old state: 1 (NORMAL)."
--#TYPE "StorageCell Event"
--#SUMMARY "SCellName-TimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."
--#ARGUMENTS {0,1,2,3,4,}
--#SEVERITY CRITICAL
--#TIMEINDEX 136
--#STATE WARNING
::= 13602325
sCellEventTrap916 TRAP-TYPE -- CAC Code: 0
ENTERPRISE compaq
VARIABLES { scellNameDateTime,
scellSWComponent,
scellECode,
scellCAC,
scellEIP}
DESCRIPTION
"Severity: Normal -- informational in nature. The temperature within the HSV110 controller identified in the handle field has returned to its normal operating range. The value.ul1 field contains the current temperature reading in celsius from I2C sensor 1, while the value.ul2 field contains the adjusted reading from I2C sensor 2."
--#TYPE "StorageCell Event"
--#SUMMARY "SCellName-TimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."
--#ARGUMENTS {0,1,2,3,4,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
--#STATE WARNING
::= 13602326
sCellEventTrap917 TRAP-TYPE -- CAC Code: 28
ENTERPRISE compaq
VARIABLES { scellNameDateTime,
scellSWComponent,
scellECode,
scellCAC,
scellEIP}
DESCRIPTION
"Severity: Critical -- failure or failure imminent. An HSV110 controller's battery assembly has been removed. The Battery Present flag for battery assembly '1' located within the HSV110 controller identified in the handle field has changed from PRESENT to NOT PRESENT indicating that the battery assembly was removed. The secondaryId field contains the battery assembly '1' internal identifier value: 1. The value.ul1 field contains the new state of the Battery Present flag: 0 (NOT PRESENT). The value.ul2 field contains the old state of the Battery Present flag: 1 (PRESENT)."
--#TYPE "StorageCell Event"
--#SUMMARY "SCellName-TimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."
--#ARGUMENTS {0,1,2,3,4,}
--#SEVERITY CRITICAL
--#TIMEINDEX 136
--#STATE WARNING
::= 13602327
sCellEventTrap918 TRAP-TYPE -- CAC Code: 0
ENTERPRISE compaq
VARIABLES { scellNameDateTime,
scellSWComponent,
scellECode,
scellCAC,
scellEIP}
DESCRIPTION
"Severity: Normal -- informational in nature. The Battery In Use flag for battery assembly '1' located within the HSV110 controller identified in the handle field has transitioned from the NOT IN USE to IN USE state indicating that the battery assembly is functioning properly. The secondaryId field contains the battery assembly '1' internal identifier value: 1. The value.ul1 field contains the new state of the Battery In Use flag: 1 (IN USE). The value.ul2 field contains the old state of the Battery In Use flag: 0 (NOT IN USE)."
--#TYPE "StorageCell Event"
--#SUMMARY "SCellName-TimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."
--#ARGUMENTS {0,1,2,3,4,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
--#STATE WARNING
::= 13602328
sCellEventTrap919 TRAP-TYPE -- CAC Code: 0
ENTERPRISE compaq
VARIABLES { scellNameDateTime,
scellSWComponent,
scellECode,
scellCAC,
scellEIP}
DESCRIPTION
"Severity: Normal -- informational in nature. One of the voltage sensors located within the HSV110 controller identified in the handle field has reported a voltage that indicates that a voltage that was previously out of range has returned to the normal range. The value.ul1 field contains the normal range voltage value. The secondaryId field contains the voltage threshold value (i.e., 12V, 5V, 3.3V, 2.5V or 2V). Note that the voltages are expressed in thousands--e.g., 12.5V is expressed as 12500."
--#TYPE "StorageCell Event"
--#SUMMARY "SCellName-TimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."
--#ARGUMENTS {0,1,2,3,4,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
--#STATE WARNING
::= 13602329
sCellEventTrap91a TRAP-TYPE -- CAC Code: 2f
ENTERPRISE compaq
VARIABLES { scellNameDateTime,
scellSWComponent,
scellECode,
scellCAC,
scellEIP}
DESCRIPTION
"Severity: Warning -- not failed but attention recommended or required. The battery assembly voltage regulator located within the HSV110 controller identified in the handle field is offline."
--#TYPE "StorageCell Event"
--#SUMMARY "SCellName-TimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."
--#ARGUMENTS {0,1,2,3,4,}
--#SEVERITY MINOR
--#TIMEINDEX 136
--#STATE WARNING
::= 13602330
sCellEventTrap91b TRAP-TYPE -- CAC Code: 0
ENTERPRISE compaq
VARIABLES { scellNameDateTime,
scellSWComponent,
scellECode,
scellCAC,
scellEIP}
DESCRIPTION
"Severity: Normal -- informational in nature. The state of the Disk Group identified in the handle field has transitioned to the NORMAL state. The value.ul1 field contains the new Disk Group state: 1 (NORMAL). The value.ul2 field contains the old Disk Group state. The state values that may be found in the value.ul2 field are as follows: - 2 = Disk Group with no redundancy is inoperative
- 3 = Disk Group with parity redundancy is inoperative
- 4 = Disk Group with mirrored redundancy is inoperative
- 5 = Disk Group with no redundancy is inoperative, marked for re-use
- 6 = Disk Group with parity redundancy is inoperative, marked for re-use
- 7 = Disk Group with mirrored redundancy is inoperative, marked for re-use
"
--#TYPE "StorageCell Event"
--#SUMMARY "SCellName-TimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."
--#ARGUMENTS {0,1,2,3,4,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
--#STATE WARNING
::= 13602331
sCellEventTrap91c TRAP-TYPE -- CAC Code: 0
ENTERPRISE compaq
VARIABLES { scellNameDateTime,
scellSWComponent,
scellECode,
scellCAC,
scellEIP}
DESCRIPTION
"Severity: Normal -- informational in nature. The Occupancy Alarm Level for the Disk Group identified in the handle field has returned to the normal range."
--#TYPE "StorageCell Event"
--#SUMMARY "SCellName-TimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."
--#ARGUMENTS {0,1,2,3,4,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
--#STATE WARNING
::= 13602332
sCellEventTrap91d TRAP-TYPE -- CAC Code: 22
ENTERPRISE compaq
VARIABLES { scellNameDateTime,
scellSWComponent,
scellECode,
scellCAC,
scellEIP}
DESCRIPTION
"Severity: Critical -- failure or failure imminent. An HSV110 controller's battery assembly has malfunctioned. The Battery In Use flag for battery assembly '1' located within the HSV110 controller identified in the handle field has transitioned from the IN USE to NOT IN USE state indicating that the battery assembly has malfunctioned. The secondaryId field contains the battery assembly '1' internal identifier value: 1. The value.ul1 field contains the new state of the Battery In Use flag: 0 (NOT IN USE). The value.ul2 field contains the old state of the Battery In Use flag: 1 (IN USE)."
--#TYPE "StorageCell Event"
--#SUMMARY "SCellName-TimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."
--#ARGUMENTS {0,1,2,3,4,}
--#SEVERITY CRITICAL
--#TIMEINDEX 136
--#STATE WARNING
::= 13602333
sCellEventTrap91e TRAP-TYPE -- CAC Code: 0
ENTERPRISE compaq
VARIABLES { scellNameDateTime,
scellSWComponent,
scellECode,
scellCAC,
scellEIP}
DESCRIPTION
"Severity: Normal -- informational in nature. The Battery Present flag for battery assembly '1' located within the HSV110 controller identified in the handle field has changed from NOT PRESENT to PRESENT indicating that the battery assembly was reinstalled. The secondaryId field contains the battery assembly '1' internal identifier value: 1. The value.ul1 field contains the new state of the Battery Present flag: 1 (PRESENT). The value.ul2 field contains the old state of the Battery Present flag: 0 (NOT PRESENT)."
--#TYPE "StorageCell Event"
--#SUMMARY "SCellName-TimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."
--#ARGUMENTS {0,1,2,3,4,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
--#STATE WARNING
::= 13602334
sCellEventTrap91f TRAP-TYPE -- CAC Code: 29
ENTERPRISE compaq
VARIABLES { scellNameDateTime,
scellSWComponent,
scellECode,
scellCAC,
scellEIP}
DESCRIPTION
"Severity: Critical -- failure or failure imminent. An HSV110 controller's battery assembly has been removed. The Battery Present flag for battery assembly '2' located within the HSV110 controller identified in the handle field has changed from PRESENT to NOT PRESENT indicating that the battery assembly was removed. The secondaryId field contains the battery assembly '2' internal identifier value: 2. The value.ul1 field contains the new state of the Battery Present flag: 0 (NOT PRESENT). The value.ul2 field contains the old state of the Battery Present flag: 1 (PRESENT)."
--#TYPE "StorageCell Event"
--#SUMMARY "SCellName-TimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."
--#ARGUMENTS {0,1,2,3,4,}
--#SEVERITY CRITICAL
--#TIMEINDEX 136
--#STATE WARNING
::= 13602335
sCellEventTrap920 TRAP-TYPE -- CAC Code: 0
ENTERPRISE compaq
VARIABLES { scellNameDateTime,
scellSWComponent,
scellECode,
scellCAC,
scellEIP}
DESCRIPTION
"Severity: Normal -- informational in nature. The Battery Present flag for battery assembly '2' located within the HSV110 controller identified in the handle field has changed from NOT PRESENT to PRESENT indicating that the battery assembly was reinstalled. The secondaryId field contains the battery assembly '2' internal identifier value: 2. The value.ul1 field contains the new state of the Battery Present flag: 1 (PRESENT). The value.ul2 field contains the old state of the Battery Present flag: 0 (NOT PRESENT)."
--#TYPE "StorageCell Event"
--#SUMMARY "SCellName-TimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."
--#ARGUMENTS {0,1,2,3,4,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
--#STATE WARNING
::= 13602336
sCellEventTrap921 TRAP-TYPE -- CAC Code: 0
ENTERPRISE compaq
VARIABLES { scellNameDateTime,
scellSWComponent,
scellECode,
scellCAC,
scellEIP}
DESCRIPTION
"Severity: Normal -- informational in nature. The Battery In Use flag for battery assembly '2' located within the HSV110 controller identified in the handle field has transitioned from the NOT IN USE to IN USE state indicating that the battery assembly is functioning properly. The secondaryId field contains the battery assembly '2' internal identifier value: 2. The value.ul1 field contains the new state of the Battery In Use flag: 1 (IN USE). The value.ul2 field contains the old state of the Battery In Use flag: 0 (NOT IN USE)."
--#TYPE "StorageCell Event"
--#SUMMARY "SCellName-TimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."
--#ARGUMENTS {0,1,2,3,4,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
--#STATE WARNING
::= 13602337
sCellEventTrap922 TRAP-TYPE -- CAC Code: 23
ENTERPRISE compaq
VARIABLES { scellNameDateTime,
scellSWComponent,
scellECode,
scellCAC,
scellEIP}
DESCRIPTION
"Severity: Critical -- failure or failure imminent. An HSV110 controller's battery assembly has malfunctioned. The Battery In Use flag for battery assembly '2' located within the HSV110 controller identified in the handle field has transitioned from the IN USE to NOT IN USE state indicating that the battery assembly has malfunctioned. The secondaryId field contains the battery assembly '2' internal identifier value: 2. The value.ul1 field contains the new state of the Battery In Use flag: 0 (NOT IN USE). The value.ul2 field contains the old state of the Battery In Use flag: 1 (IN USE)."
--#TYPE "StorageCell Event"
--#SUMMARY "SCellName-TimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."
--#ARGUMENTS {0,1,2,3,4,}
--#SEVERITY CRITICAL
--#TIMEINDEX 136
--#STATE WARNING
::= 13602338
sCellEventTrap923 TRAP-TYPE -- CAC Code: 2b
ENTERPRISE compaq
VARIABLES { scellNameDateTime,
scellSWComponent,
scellECode,
scellCAC,
scellEIP}
DESCRIPTION
"Severity: Critical -- failure or failure imminent. The Blower Present flag for the '2' blower assembly located within the HSV110 controller identified in the handle field has transitioned from the PRESENT to NOT PRESENT state indicating that the blower has been removed. The secondaryId field contains the '2' blower assembly internal identifier value: 2. The value.ul1 field contains the new state of the Blower Present flag: 0 (NOT PRESENT). The value.ul2 field contains the old state of the Blower Present flag: 1 (PRESENT)."
--#TYPE "StorageCell Event"
--#SUMMARY "SCellName-TimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."
--#ARGUMENTS {0,1,2,3,4,}
--#SEVERITY CRITICAL
--#TIMEINDEX 136
--#STATE WARNING
::= 13602339
sCellEventTrap924 TRAP-TYPE -- CAC Code: 0
ENTERPRISE compaq
VARIABLES { scellNameDateTime,
scellSWComponent,
scellECode,
scellCAC,
scellEIP}
DESCRIPTION
"Severity: Normal -- informational in nature. The Blower Present flag for the '2' blower assembly located within the HSV110 controller identified in the handle field has transitioned from the NOT PRESENT to PRESENT state indicating that the blower has been reinstalled. The secondaryId field contains the '2' blower assembly internal identifier value: 2. The value.ul1 field contains the new state of the Blower Present flag: 1 (PRESENT). The value.ul2 field contains the old state of the Blower Present flag: 0 (NOT PRESENT)."
--#TYPE "StorageCell Event"
--#SUMMARY "SCellName-TimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."
--#ARGUMENTS {0,1,2,3,4,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
--#STATE WARNING
::= 13602340
sCellEventTrap925 TRAP-TYPE -- CAC Code: 25
ENTERPRISE compaq
VARIABLES { scellNameDateTime,
scellSWComponent,
scellECode,
scellCAC,
scellEIP}
DESCRIPTION
"Severity: Critical -- failure or failure imminent. The '2' blower located within the HSV110 controller identified in the handle field is running slower than the lowest acceptable speed. The secondaryId field contains the '2' blower assembly internal identifier value: 2. The value.ul1 field contains the current speed of the '2' blower. The value.ul2 field contains the lowest acceptable speed for the '2' blower."
--#TYPE "StorageCell Event"
--#SUMMARY "SCellName-TimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."
--#ARGUMENTS {0,1,2,3,4,}
--#SEVERITY CRITICAL
--#TIMEINDEX 136
--#STATE WARNING
::= 13602341
sCellEventTrap926 TRAP-TYPE -- CAC Code: 2c
ENTERPRISE compaq
VARIABLES { scellNameDateTime,
scellSWComponent,
scellECode,
scellCAC,
scellEIP}
DESCRIPTION
"Severity: Critical -- failure or failure imminent. An HSV110 controller's '1' blower/power supply assembly has been removed or AC power has been removed from the power supply. The HSV110 controller is identified in the handle field. The secondaryId field contains the '1' blower/power supply assembly internal identifier value: 1. The value.ul1 field contains the new state of the Blower/Power Supply Present flag: 0 (NOT PRESENT). The value.ul2 field contains the old state of the Blower/Power Supply Present flag: 1 (PRESENT)."
--#TYPE "StorageCell Event"
--#SUMMARY "SCellName-TimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."
--#ARGUMENTS {0,1,2,3,4,}
--#SEVERITY CRITICAL
--#TIMEINDEX 136
--#STATE WARNING
::= 13602342
sCellEventTrap927 TRAP-TYPE -- CAC Code: 0
ENTERPRISE compaq
VARIABLES { scellNameDateTime,
scellSWComponent,
scellECode,
scellCAC,
scellEIP}
DESCRIPTION
"Severity: Normal -- informational in nature. An HSV110 controller's '1' blower/power supply assembly has been reinstalled or AC power has been restored to the power supply. The HSV110 controller is identified in the handle field. The secondaryId field contains the '1' blower/power supply assembly internal identifier value: 1. The value.ul1 field contains the new state of the Blower/Power Supply Present flag: 1 (PRESENT). The value.ul2 field contains the old state of the Blower/Power Supply Present flag: 0 (NOT PRESENT)."
--#TYPE "StorageCell Event"
--#SUMMARY "SCellName-TimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."
--#ARGUMENTS {0,1,2,3,4,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
--#STATE WARNING
::= 13602343
sCellEventTrap928 TRAP-TYPE -- CAC Code: 2d
ENTERPRISE compaq
VARIABLES { scellNameDateTime,
scellSWComponent,
scellECode,
scellCAC,
scellEIP}
DESCRIPTION
"Severity: Critical -- failure or failure imminent. An HSV110 controller's '2' blower/power supply assembly has been removed or AC power has been removed from the power supply. The HSV110 controller is identified in the handle field. The secondaryId field contains the '2' blower/power supply assembly internal identifier value: 2. The value.ul1 field contains the new state of the Blower/Power Supply Present flag: 0 (NOT PRESENT). The value.ul2 field contains the old state of the Blower/Power Supply Present flag: 1 (PRESENT)."
--#TYPE "StorageCell Event"
--#SUMMARY "SCellName-TimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."
--#ARGUMENTS {0,1,2,3,4,}
--#SEVERITY CRITICAL
--#TIMEINDEX 136
--#STATE WARNING
::= 13602344
sCellEventTrap929 TRAP-TYPE -- CAC Code: 0
ENTERPRISE compaq
VARIABLES { scellNameDateTime,
scellSWComponent,
scellECode,
scellCAC,
scellEIP}
DESCRIPTION
"Severity: Normal -- informational in nature. An HSV110 controller's '2' blower/power supply assembly has been reinstalled or AC power has been restored to the power supply. The HSV110 controller is identified in the handle field. The secondaryId field contains the '2' blower/power supply assembly internal identifier value: 2. The value.ul1 field contains the new state of the Blower/Power Supply Present flag: 1 (PRESENT). The value.ul2 field contains the old state of the Blower/Power Supply Present flag: 0 (NOT PRESENT)."
--#TYPE "StorageCell Event"
--#SUMMARY "SCellName-TimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."
--#ARGUMENTS {0,1,2,3,4,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
--#STATE WARNING
::= 13602345
sCellEventTrap92a TRAP-TYPE -- CAC Code: 26
ENTERPRISE compaq
VARIABLES { scellNameDateTime,
scellSWComponent,
scellECode,
scellCAC,
scellEIP}
DESCRIPTION
"Severity: Critical -- failure or failure imminent. The '1' blower/power supply located within the HSV110 controller identified in the handle field is running slower than the lowest acceptable speed. The secondaryId field contains the '1' blower/power supply assembly internal identifier value: 1. The value.ul1 field contains the current speed of the '1' blower/power supply. The value.ul2 field contains the lowest acceptable speed for the '1' blower/power supply."
--#TYPE "StorageCell Event"
--#SUMMARY "SCellName-TimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."
--#ARGUMENTS {0,1,2,3,4,}
--#SEVERITY CRITICAL
--#TIMEINDEX 136
--#STATE WARNING
::= 13602346
sCellEventTrap92b TRAP-TYPE -- CAC Code: 27
ENTERPRISE compaq
VARIABLES { scellNameDateTime,
scellSWComponent,
scellECode,
scellCAC,
scellEIP}
DESCRIPTION
"Severity: Critical -- failure or failure imminent. The '2' blower/power supply located within the HSV110 controller identified in the handle field is running slower than the lowest acceptable speed. The secondaryId field contains the '2' blower/power supply assembly internal identifier value: 2. The value.ul1 field contains the current speed of the '2' blower/power supply. The value.ul2 field contains the lowest acceptable speed for the '2' blower/power supply."
--#TYPE "StorageCell Event"
--#SUMMARY "SCellName-TimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."
--#ARGUMENTS {0,1,2,3,4,}
--#SEVERITY CRITICAL
--#TIMEINDEX 136
--#STATE WARNING
::= 13602347
sCellEventTrap92c TRAP-TYPE -- CAC Code: 2f
ENTERPRISE compaq
VARIABLES { scellNameDateTime,
scellSWComponent,
scellECode,
scellCAC,
scellEIP}
DESCRIPTION
"Severity: Warning -- not failed but attention recommended or required. The state of a battery assembly within the HSV110 controller identified in the handle field has transitioned to the Battery System Hold-up Time is zero hours state. The value.ul1 field contains the new state 5: (Battery System Hold-up Time is zero hours). The value.ul2 field contains the old state. The state values that may be found in the value.ul2 field are as follows: - 1 = Battery System Hold-up Time is greater than 96 hours
- 3 = Battery System Hold-up Time is greater than 0 and less than 96 hours
- 5 = Battery System Hold-up Time is zero hours
"
--#TYPE "StorageCell Event"
--#SUMMARY "SCellName-TimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."
--#ARGUMENTS {0,1,2,3,4,}
--#SEVERITY MINOR
--#TIMEINDEX 136
--#STATE WARNING
::= 13602348
sCellEventTrap92d TRAP-TYPE -- CAC Code: bf
ENTERPRISE compaq
VARIABLES { scellNameDateTime,
scellSWComponent,
scellECode,
scellCAC,
scellEIP}
DESCRIPTION
"Severity: Undetermined -- more information needed to determine severity. The Resource Availability state of a Volume has transitioned to the INSUFFICIENT state. The affected Volume is identified in the handle field. The addHandle field contains the identity of the Physical Disk Drive that is associated with that Volume. The enclosure number, bay number, and rack number where the associated Physical Disk Drive is located are contained in the attribute.value.u32[0], attribute.value.u32[1], and attribute.value.u32[2] fields, respectively. The internal identification of that Volume's Redundant Storage Set is contained in the attribute.value.u32[3] field. The attribute.type field contains the value of 1. The value.ul1 field contains the new state: 1 (INSUFFICIENT). The value.ul2 field contains the old state: 0 (SUFFICIENT)."
--#TYPE "StorageCell Event"
--#SUMMARY "SCellName-TimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."
--#ARGUMENTS {0,1,2,3,4,}
--#SEVERITY CRITICAL
--#TIMEINDEX 136
--#STATE WARNING
::= 13602349
sCellEventTrap92e TRAP-TYPE -- CAC Code: 0
ENTERPRISE compaq
VARIABLES { scellNameDateTime,
scellSWComponent,
scellECode,
scellCAC,
scellEIP}
DESCRIPTION
"Severity: Normal -- informational in nature. The HSV110 controller identified in the handle field rejected a login attempt. The value.ul1 and value.ul2 fields contain words [0] and [1], respectively, of the World Wide Name of the host adapter that originated the rejected login attempt. The secondaryId field contains the reason for the rejection as follows: - 50 = The host is already logged in
- 101 = Maximum number of logins is exceeded
- 102 = Invalid cookie was sent
- 106 = The password is not set on the HSV110 controller
"
--#TYPE "StorageCell Event"
--#SUMMARY "SCellName-TimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."
--#ARGUMENTS {0,1,2,3,4,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
--#STATE WARNING
::= 13602350
sCellEventTrap92f TRAP-TYPE -- CAC Code: 0
ENTERPRISE compaq
VARIABLES { scellNameDateTime,
scellSWComponent,
scellECode,
scellCAC,
scellEIP}
DESCRIPTION
"Severity: Normal -- informational in nature. The HSV110 controller identified in the handle field processed a Storage System Management Interface command with the result of non-success return code. The value.ul1 field contains internal the command type. The value.ul2 field contains the internal return code. The attribute.value.obj field contains the internal target and internal version of the command."
--#TYPE "StorageCell Event"
--#SUMMARY "SCellName-TimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."
--#ARGUMENTS {0,1,2,3,4,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
--#STATE WARNING
::= 13602351
sCellEventTrap930 TRAP-TYPE -- CAC Code: 0
ENTERPRISE compaq
VARIABLES { scellNameDateTime,
scellSWComponent,
scellECode,
scellCAC,
scellEIP}
DESCRIPTION
"Severity: Normal -- informational in nature. The HSV110 controller identified in the handle field has updated the physical disk drive map for the loop pair identified in the secondaryId field. The value.ul1 field contains the new internal map generation number. The value.ul2 field contains the old internal map generation number."
--#TYPE "StorageCell Event"
--#SUMMARY "SCellName-TimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."
--#ARGUMENTS {0,1,2,3,4,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
--#STATE WARNING
::= 13602352
sCellEventTrap931 TRAP-TYPE -- CAC Code: 42
ENTERPRISE compaq
VARIABLES { scellNameDateTime,
scellSWComponent,
scellECode,
scellCAC,
scellEIP}
DESCRIPTION
"Severity: Critical -- failure or failure imminent. The state of the Physical Disk Drive identified in the handle field has transitioned to the DEGRADED state. The value.ul1 field contains the new state: 2 (DEGRADED). The value.ul2 field contains the old state. The state values that may be in the value.ul2 field are as follows: - 1 = Normal
- 3 = Failed
- 4 = Not present
- 5 = Single Port on Fibre
The enclosure number, bay number, and rack number where the Physical Disk Drive is located are contained in the attribute.value.u32[0], attribute.value.u32[1], attribute.value.u32[2] fields, respectively. The attribute.type field contains value 1. The rack number in the attribute.value.u32[2] field will not contain a valid value until a future release."
--#TYPE "StorageCell Event"
--#SUMMARY "SCellName-TimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."
--#ARGUMENTS {0,1,2,3,4,}
--#SEVERITY CRITICAL
--#TIMEINDEX 136
--#STATE WARNING
::= 13602353
sCellEventTrap932 TRAP-TYPE -- CAC Code: 40
ENTERPRISE compaq
VARIABLES { scellNameDateTime,
scellSWComponent,
scellECode,
scellCAC,
scellEIP}
DESCRIPTION
"Severity: Critical -- failure or failure imminent. The state of the Physical Disk Drive identified in the handle field has transitioned to the FAILED state. The value.ul1 field contains the new state: 3 (FAILED). The value.ul2 field contains the old state. The state values that may be in the value.ul2 field are as follows: - 1 = Normal
- 2 = Degraded
- 4 = Not present
- 5 = Single Port on Fibre
The enclosure number, bay number, and rack number where the Physical Disk Drive is located are contained in the attribute.value.u32[0], attribute.value.u32[1], attribute.value.u32[2] fields, respectively. The attribute.type field contains value 1. The rack number in the attribute.value.u32[2] field will not contain a valid value until a future release."
--#TYPE "StorageCell Event"
--#SUMMARY "SCellName-TimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."
--#ARGUMENTS {0,1,2,3,4,}
--#SEVERITY CRITICAL
--#TIMEINDEX 136
--#STATE WARNING
::= 13602354
sCellEventTrap933 TRAP-TYPE -- CAC Code: 0
ENTERPRISE compaq
VARIABLES { scellNameDateTime,
scellSWComponent,
scellECode,
scellCAC,
scellEIP}
DESCRIPTION
"Severity: Normal -- informational in nature. The Derived Unit identified in the handle field was created. The addHandle field contains the identity of the Storage System Virtual Disk that is associated with that Derived Unit. The attribute.value.obj field contains the identity of the Virtual Disk associated with that Derived Unit."
--#TYPE "StorageCell Event"
--#SUMMARY "SCellName-TimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."
--#ARGUMENTS {0,1,2,3,4,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
--#STATE WARNING
::= 13602355
sCellEventTrap934 TRAP-TYPE -- CAC Code: 0
ENTERPRISE compaq
VARIABLES { scellNameDateTime,
scellSWComponent,
scellECode,
scellCAC,
scellEIP}
DESCRIPTION
"Severity: Normal -- informational in nature. The internal Logical Disk associated with the Virtual Disk identified in the handle field was created. The addHandle field contains the identity of the Disk Group where this internal Logical Disk was created. The attribute.value.u64[0] field contains the size (in blocks) of the internal Logical Disk. The attribute.value.u32[2] field contains the redundancy type of the internal Logical Disk. The attribute.type field contains the value 5. The values that may be found in the attribute.value.u32[2] field are as follows: - 1 = Vraid0
- 2 = Vraid1
- 3 = Vraid5
"
--#TYPE "StorageCell Event"
--#SUMMARY "SCellName-TimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."
--#ARGUMENTS {0,1,2,3,4,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
--#STATE WARNING
::= 13602356
sCellEventTrap935 TRAP-TYPE -- CAC Code: 0
ENTERPRISE compaq
VARIABLES { scellNameDateTime,
scellSWComponent,
scellECode,
scellCAC,
scellEIP}
DESCRIPTION
"Severity: Normal -- informational in nature. The Disk Group identified in the handle field was created. The attribute.value.u32[0] field contains the number of physical disk drives within the Disk Group. The attribute.type field contains the value 1."
--#TYPE "StorageCell Event"
--#SUMMARY "SCellName-TimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."
--#ARGUMENTS {0,1,2,3,4,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
--#STATE WARNING
::= 13602357
sCellEventTrap936 TRAP-TYPE -- CAC Code: 0
ENTERPRISE compaq
VARIABLES { scellNameDateTime,
scellSWComponent,
scellECode,
scellCAC,
scellEIP}
DESCRIPTION
"Severity: Normal -- informational in nature. The Physical Disk Drive identified in the handle field was discovered. The enclosure, bay and rack where the Physical Disk Drive is located are contained in the attribute.value.u32[0], attribute.value.u32[1] and attribute.value.u32[2] fields, respectively. The attribute.type field contains the value 1."
--#TYPE "StorageCell Event"
--#SUMMARY "SCellName-TimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."
--#ARGUMENTS {0,1,2,3,4,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
--#STATE WARNING
::= 13602358
sCellEventTrap937 TRAP-TYPE -- CAC Code: 0
ENTERPRISE compaq
VARIABLES { scellNameDateTime,
scellSWComponent,
scellECode,
scellCAC,
scellEIP}
DESCRIPTION
"Severity: Normal -- informational in nature. The Presented Unit identified in the handle field was created. The addHandle field contains the identity of the Storage System Virtual Disk that is associated with the Presented Unit. This Presented Unit is associated with the Virtual Disk identified in the attribute.value.obj.handle field. The addHandle2 field contains the associated Storage System Host path, and addData[0] and addData[1] contains the host LUN number."
--#TYPE "StorageCell Event"
--#SUMMARY "SCellName-TimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."
--#ARGUMENTS {0,1,2,3,4,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
--#STATE WARNING
::= 13602359
sCellEventTrap938 TRAP-TYPE -- CAC Code: 0
ENTERPRISE compaq
VARIABLES { scellNameDateTime,
scellSWComponent,
scellECode,
scellCAC,
scellEIP}
DESCRIPTION
"Severity: Normal -- informational in nature. The Storage System Host path identified in the handle field was created."
--#TYPE "StorageCell Event"
--#SUMMARY "SCellName-TimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."
--#ARGUMENTS {0,1,2,3,4,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
--#STATE WARNING
::= 13602360
sCellEventTrap939 TRAP-TYPE -- CAC Code: 0
ENTERPRISE compaq
VARIABLES { scellNameDateTime,
scellSWComponent,
scellECode,
scellCAC,
scellEIP}
DESCRIPTION
"Severity: Normal -- informational in nature. The Storage System Virtual Disk identified in the handle field was created."
--#TYPE "StorageCell Event"
--#SUMMARY "SCellName-TimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."
--#ARGUMENTS {0,1,2,3,4,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
--#STATE WARNING
::= 13602361
sCellEventTrap93a TRAP-TYPE -- CAC Code: 0
ENTERPRISE compaq
VARIABLES { scellNameDateTime,
scellSWComponent,
scellECode,
scellCAC,
scellEIP}
DESCRIPTION
"Severity: Normal -- informational in nature. A Volume was created. The Volume is identified in the handle field. The addHandle field contains the identity of the Physical Disk Drive that is associated with that Volume. The enclosure number, bay number, and rack number where the associated Physical Disk Drive is located are contained in the attribute.value.u32[0], attribute.value.u32[1], and attribute.value.u32[2] fields, respectively. The attribute.type field contains the value of 1."
--#TYPE "StorageCell Event"
--#SUMMARY "SCellName-TimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."
--#ARGUMENTS {0,1,2,3,4,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
--#STATE WARNING
::= 13602362
sCellEventTrap93b TRAP-TYPE -- CAC Code: 0
ENTERPRISE compaq
VARIABLES { scellNameDateTime,
scellSWComponent,
scellECode,
scellCAC,
scellEIP}
DESCRIPTION
"Severity: Normal -- informational in nature. The Derived Unit identified in the handle field was deleted. The addHandle field contains the identity of the Storage System Virtual Disk that was associated with the Derived Unit. This Derived Unit is associated with the Virtual Disk identified in the attribute.value.obj.handle field."
--#TYPE "StorageCell Event"
--#SUMMARY "SCellName-TimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."
--#ARGUMENTS {0,1,2,3,4,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
--#STATE WARNING
::= 13602363
sCellEventTrap93c TRAP-TYPE -- CAC Code: 0
ENTERPRISE compaq
VARIABLES { scellNameDateTime,
scellSWComponent,
scellECode,
scellCAC,
scellEIP}
DESCRIPTION
"Severity: Normal -- informational in nature. The internal Logical Disk associated with the Virtual Disk identified in the handle field was deleted."
--#TYPE "StorageCell Event"
--#SUMMARY "SCellName-TimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."
--#ARGUMENTS {0,1,2,3,4,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
--#STATE WARNING
::= 13602364
sCellEventTrap93d TRAP-TYPE -- CAC Code: 0
ENTERPRISE compaq
VARIABLES { scellNameDateTime,
scellSWComponent,
scellECode,
scellCAC,
scellEIP}
DESCRIPTION
"Severity: Normal -- informational in nature. The Disk Group identified in the handle field was deleted."
--#TYPE "StorageCell Event"
--#SUMMARY "SCellName-TimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."
--#ARGUMENTS {0,1,2,3,4,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
--#STATE WARNING
::= 13602365
sCellEventTrap93e TRAP-TYPE -- CAC Code: 42
ENTERPRISE compaq
VARIABLES { scellNameDateTime,
scellSWComponent,
scellECode,
scellCAC,
scellEIP}
DESCRIPTION
"Severity: Critical -- failure or failure imminent. The Physical Disk Drive identified in the handle field has disappeared. The enclosure, bay and rack where the Physical Disk Drive is located are contained in the attribute.value.u32[0], attribute.value.u32[1] and attribute.value.u32[2] fields, respectively. The attribute.type field contains the value 1."
--#TYPE "StorageCell Event"
--#SUMMARY "SCellName-TimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."
--#ARGUMENTS {0,1,2,3,4,}
--#SEVERITY CRITICAL
--#TIMEINDEX 136
--#STATE WARNING
::= 13602366
sCellEventTrap93f TRAP-TYPE -- CAC Code: 0
ENTERPRISE compaq
VARIABLES { scellNameDateTime,
scellSWComponent,
scellECode,
scellCAC,
scellEIP}
DESCRIPTION
"Severity: Normal -- informational in nature. The Presented Unit identified in the handle field was deleted. The addHandle field contains the identity of the Storage System Virtual Disk that was associated with the Presented Unit. This Presented Unit is associated with the Virtual Disk identified in the attribute.value.obj.handle field."
--#TYPE "StorageCell Event"
--#SUMMARY "SCellName-TimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."
--#ARGUMENTS {0,1,2,3,4,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
--#STATE WARNING
::= 13602367
sCellEventTrap940 TRAP-TYPE -- CAC Code: 0
ENTERPRISE compaq
VARIABLES { scellNameDateTime,
scellSWComponent,
scellECode,
scellCAC,
scellEIP}
DESCRIPTION
"Severity: Normal -- informational in nature. The Storage System Host path identified in the handle field was deleted."
--#TYPE "StorageCell Event"
--#SUMMARY "SCellName-TimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."
--#ARGUMENTS {0,1,2,3,4,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
--#STATE WARNING
::= 13602368
sCellEventTrap941 TRAP-TYPE -- CAC Code: 0
ENTERPRISE compaq
VARIABLES { scellNameDateTime,
scellSWComponent,
scellECode,
scellCAC,
scellEIP}
DESCRIPTION
"Severity: Normal -- informational in nature. The Storage System Virtual Disk identified in the handle field was deleted. The Storage System Virtual Disk is associated with the Virtual Disk identified in the addHandle field."
--#TYPE "StorageCell Event"
--#SUMMARY "SCellName-TimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."
--#ARGUMENTS {0,1,2,3,4,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
--#STATE WARNING
::= 13602369
sCellEventTrap943 TRAP-TYPE -- CAC Code: 0
ENTERPRISE compaq
VARIABLES { scellNameDateTime,
scellSWComponent,
scellECode,
scellCAC,
scellEIP}
DESCRIPTION
"Severity: Normal -- informational in nature. The HSV110 controller identified in the handle field has joined the Storage System. If the handle field is zero, the HSV110 controller identity could not be obtained due to an unexpected state transition."
--#TYPE "StorageCell Event"
--#SUMMARY "SCellName-TimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."
--#ARGUMENTS {0,1,2,3,4,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
--#STATE WARNING
::= 13602371
sCellEventTrap944 TRAP-TYPE -- CAC Code: ba
ENTERPRISE compaq
VARIABLES { scellNameDateTime,
scellSWComponent,
scellECode,
scellCAC,
scellEIP}
DESCRIPTION
"Severity: Undetermined -- more information needed to determine severity. An HSV110 controller has left the Storage System. The HSV110 controller is identified in the handle field. If the handle field is zero, the HSV110 controller identity could not be obtained due to an unexpected state transition."
--#TYPE "StorageCell Event"
--#SUMMARY "SCellName-TimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."
--#ARGUMENTS {0,1,2,3,4,}
--#SEVERITY CRITICAL
--#TIMEINDEX 136
--#STATE WARNING
::= 13602372
sCellEventTrap945 TRAP-TYPE -- CAC Code: 0
ENTERPRISE compaq
VARIABLES { scellNameDateTime,
scellSWComponent,
scellECode,
scellCAC,
scellEIP}
DESCRIPTION
"Severity: Normal -- informational in nature. A Storage System has been deleted by an HSV110 controller. The Storage System is identified in the handle field. The HSV110 controller is identified in the addHandle field. If the handle field or addHandle field is zero, the corresponding identity could not be obtained due to an unexpected state transition."
--#TYPE "StorageCell Event"
--#SUMMARY "SCellName-TimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."
--#ARGUMENTS {0,1,2,3,4,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
--#STATE WARNING
::= 13602373
sCellEventTrap946 TRAP-TYPE -- CAC Code: 0
ENTERPRISE compaq
VARIABLES { scellNameDateTime,
scellSWComponent,
scellECode,
scellCAC,
scellEIP}
DESCRIPTION
"Severity: Normal -- informational in nature. The Data Replication Group identified in the handle field was created."
--#TYPE "StorageCell Event"
--#SUMMARY "SCellName-TimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."
--#ARGUMENTS {0,1,2,3,4,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
--#STATE WARNING
::= 13602374
sCellEventTrap947 TRAP-TYPE -- CAC Code: 0
ENTERPRISE compaq
VARIABLES { scellNameDateTime,
scellSWComponent,
scellECode,
scellCAC,
scellEIP}
DESCRIPTION
"Severity: Normal -- informational in nature. The Data Replication Group identified in the handle field was deleted."
--#TYPE "StorageCell Event"
--#SUMMARY "SCellName-TimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."
--#ARGUMENTS {0,1,2,3,4,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
--#STATE WARNING
::= 13602375
sCellEventTrap948 TRAP-TYPE -- CAC Code: 0
ENTERPRISE compaq
VARIABLES { scellNameDateTime,
scellSWComponent,
scellECode,
scellCAC,
scellEIP}
DESCRIPTION
"Severity: Normal -- informational in nature. The internal Logical Disk associated with the Snapshot Virtual Disk identified in the handle field was created. The addHandle field contains the identity of the Disk Group where this internal Logical Disk was created. The attribute.value.u64[0] field contains the size (in blocks) of the reserved capacity of the internal Logical Disk. The attribute.value.u32[2] field contains the redundancy type of the internal Logical Disk. The attribute.value.u32[3] field contains the noid of the associated successor internal Logical Disk. The attribute.type field contains the value 6. The values that may be found in the attribute.value.u32[2] field are as follows: - 1 = Vraid0
- 2 = Vraid1
- 3 = Vraid5
"
--#TYPE "StorageCell Event"
--#SUMMARY "SCellName-TimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."
--#ARGUMENTS {0,1,2,3,4,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
--#STATE WARNING
::= 13602376
sCellEventTrap949 TRAP-TYPE -- CAC Code: 0
ENTERPRISE compaq
VARIABLES { scellNameDateTime,
scellSWComponent,
scellECode,
scellCAC,
scellEIP}
DESCRIPTION
"Severity: Normal -- informational in nature. The internal Logical Disk associated with the Copy of the Virtual Disk identified in the handle field was created. The addHandle field contains the identity of the Disk Group where this internal Logical Disk was created. The attribute.value.u64[0] field contains the size (in blocks) of the reserved capacity of the target Virtual Disk. The attribute.value.u32[2] field contains the redundancy type of the internal Logical Disk. The attribute.value.u32[3] field contains the noid of the associated successor internal Logical Disk. The attribute.type field contains the value 6. The values that may be found in the attribute.value.u32[2] field are as follows: - 1 = Vraid0
- 2 = Vraid1
- 3 = Vraid5
"
--#TYPE "StorageCell Event"
--#SUMMARY "SCellName-TimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."
--#ARGUMENTS {0,1,2,3,4,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
--#STATE WARNING
::= 13602377
sCellEventTrap965 TRAP-TYPE -- CAC Code: 0
ENTERPRISE compaq
VARIABLES { scellNameDateTime,
scellSWComponent,
scellECode,
scellCAC,
scellEIP}
DESCRIPTION
"Severity: Normal -- informational in nature. The Host Operating System mode of the Storage System Host identified in the handle field has changed. The oldAttr.type and newAttr.type fields contain the value 1. The oldAttr.value.u32[0] field contains the old Host Operating System mode. The newAttr.value.u32[0] field contains the new Host Operating System mode. The values that may be found in the oldAttr.value.u32[0] and newAttr.value.u32[0] fields are as follows: - 0 = Unknown
- 1 = User defined
- 2 = Unused
- 3 = WINNT with SecurePath
- 4 = VMS
- 5 = TRU64 UNIX
- 6 = Sun UNIX
- 7 = NetWare
- 8 = HP
- 9 = IBM
- 10 = LINUX
- 11 = SCO UNIX
"
--#TYPE "StorageCell Event"
--#SUMMARY "SCellName-TimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."
--#ARGUMENTS {0,1,2,3,4,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
--#STATE WARNING
::= 13602405
sCellEventTrap966 TRAP-TYPE -- CAC Code: 0
ENTERPRISE compaq
VARIABLES { scellNameDateTime,
scellSWComponent,
scellECode,
scellCAC,
scellEIP}
DESCRIPTION
"Severity: Normal -- informational in nature. Time was set on the Storage System identified in the handle field."
--#TYPE "StorageCell Event"
--#SUMMARY "SCellName-TimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."
--#ARGUMENTS {0,1,2,3,4,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
--#STATE WARNING
::= 13602406
sCellEventTrap967 TRAP-TYPE -- CAC Code: 0
ENTERPRISE compaq
VARIABLES { scellNameDateTime,
scellSWComponent,
scellECode,
scellCAC,
scellEIP}
DESCRIPTION
"Severity: Normal -- informational in nature. The LUN of the Presented Unit identified in the handle field has changed. The oldAttr.type field and the newAttr.type fields contain the value 1. The oldAttr.value.u32[0..1] fields contain the value of the old LUN. The newAttr.value.u32[0..1] fields contain the value of the new LUN. The secondaryId field contains the noid portion of the handle for the Storage System Virtual Disk associated with the Presented Unit. This Presented Unit is associated with the Virtual Disk identified in the addHandle field."
--#TYPE "StorageCell Event"
--#SUMMARY "SCellName-TimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."
--#ARGUMENTS {0,1,2,3,4,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
--#STATE WARNING
::= 13602407
sCellEventTrap968 TRAP-TYPE -- CAC Code: 0
ENTERPRISE compaq
VARIABLES { scellNameDateTime,
scellSWComponent,
scellECode,
scellCAC,
scellEIP}
DESCRIPTION
"Severity: Normal -- informational in nature. The Device Addition Policy of the Storage System identified in the handle field has changed. The oldAttr.type field and the newAttr.type fields contain the value 1. The oldAttr.value.u32[0] field contains the old Device Addition Policy. The newAttr.value.u32[0] field contains the new Device Addition Policy. The policy values that may be found in the oldAttr.value.u32[0] and newAttr.value.u32[0] fields are as follows: - 1 = Manual policy
- 2 = Automatic policy
"
--#TYPE "StorageCell Event"
--#SUMMARY "SCellName-TimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."
--#ARGUMENTS {0,1,2,3,4,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
--#STATE WARNING
::= 13602408
sCellEventTrap969 TRAP-TYPE -- CAC Code: 0
ENTERPRISE compaq
VARIABLES { scellNameDateTime,
scellSWComponent,
scellECode,
scellCAC,
scellEIP}
DESCRIPTION
"Severity: Normal -- informational in nature. The Quiescent state of the Storage System Virtual Disk identified in the handle field has changed. The oldAttr.type field and the newAttr.type fields contain the value 1. The oldAttr.value.u32[0] field contains the old Quiescent state. The newAttr.value.u32[0] field contains the new Quiescent state. The state values that may be found in the oldAttr.value.u32[0] and newAttr.value.u32[0] fields are as follows: - 0 = Not quiescent
- 1 = Quiescent
This Storage System Virtual Disk is associated with the Virtual Disk identified in the addHandle field."
--#TYPE "StorageCell Event"
--#SUMMARY "SCellName-TimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."
--#ARGUMENTS {0,1,2,3,4,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
--#STATE WARNING
::= 13602409
sCellEventTrap96a TRAP-TYPE -- CAC Code: 0
ENTERPRISE compaq
VARIABLES { scellNameDateTime,
scellSWComponent,
scellECode,
scellCAC,
scellEIP}
DESCRIPTION
"Severity: Normal -- informational in nature. The Enabled/Disabled state of the Storage System Virtual Disk identified in the handle field has changed. The oldAttr.type field and the newAttr.type fields contain the value 1. The oldAttr.value.u32[0] field contains the old Enabled/Disabled state. The newAttr.value.u32[0] field contains the new Enabled/Disabled state. The state values that may be found in the oldAttr.value.u32[0] and newAttr.value.u32[0] fields are as follows: This Storage System Virtual Disk is associated with the Virtual Disk identified in the addHandle field."
--#TYPE "StorageCell Event"
--#SUMMARY "SCellName-TimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."
--#ARGUMENTS {0,1,2,3,4,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
--#STATE WARNING
::= 13602410
sCellEventTrap96b TRAP-TYPE -- CAC Code: 0
ENTERPRISE compaq
VARIABLES { scellNameDateTime,
scellSWComponent,
scellECode,
scellCAC,
scellEIP}
DESCRIPTION
"Severity: Normal -- informational in nature. The Cache Policy of the Storage System Virtual Disk identified in the handle field has changed. The oldAttr.type field and the newAttr.type fields contain the value 1. The oldAttr.value.u32[0] field contains the old Write Cache Policy. The newAttr.value.u32[0] field contains the new Write Cache Policy. The policy values that may be found in the oldAttr.value.u32[0] and newAttr.value.u32[0] fields are as follows:
- 1 = Writethrough
- 2 = Writeback
The oldAttr.value.u32[1] field contains the old Read Cache Policy. The newAttr.value.u32[1] field contains the new Read Cache Policy. The policy values that may be found in the oldAttr.value.u32[1] and newAttr.value.u32[1] fields are as follows:
- 1 = Read cache on
- 2 = Read cache off
The oldAttr.value.u32[2] field contains the old Cache Mirroring Policy. The newAttr.value.u32[2] field contains the new Cache Mirroring Policy. The policy values that may be found in the oldAttr.value.u32[2] and newAttr.value.u32[2] fields are as follows:
This Storage System Virtual Disk is associated with the Virtual Disk identified in the addHandle field."
--#TYPE "StorageCell Event"
--#SUMMARY "SCellName-TimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."
--#ARGUMENTS {0,1,2,3,4,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
--#STATE WARNING
::= 13602411
sCellEventTrap96c TRAP-TYPE -- CAC Code: 0
ENTERPRISE compaq
VARIABLES { scellNameDateTime,
scellSWComponent,
scellECode,
scellCAC,
scellEIP}
DESCRIPTION
"Severity: Normal -- informational in nature. The Usage state of a Volume changed. The affected Volume is identified in the handle field. The oldAttr.value.u32[0] field contains the old Usage state. The newAttr.value.u32[0] field contains the new Usage state. The Usage state values that may be found in the oldAttr.value.u32[0] and newAttr.value.u32[0] fields are as follows: - 1 = Disk Group
- 2 = Reserved
- 4 - 20 = temporary usage reserved for drive code load
This Volume is associated with the Disk Group identified in the addHandle field, if either the old Usage state or the new Usage state is 1. The secondaryId field contains the internal identification of that Volume's Redundant Storage Set."
--#TYPE "StorageCell Event"
--#SUMMARY "SCellName-TimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."
--#ARGUMENTS {0,1,2,3,4,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
--#STATE WARNING
::= 13602412
sCellEventTrap96d TRAP-TYPE -- CAC Code: 0
ENTERPRISE compaq
VARIABLES { scellNameDateTime,
scellSWComponent,
scellECode,
scellCAC,
scellEIP}
DESCRIPTION
"Severity: Normal -- informational in nature. The Disk Failure Protection Level of the Disk Group identified in the handle field has changed. The oldAttr.type and newAttr.type fields contain the value 1. The oldAttr.value.u32[0] field contains the old number of physical disk drives available for use. The newAttr.value.u32[0] field contains the new number of physical disk drives available for use."
--#TYPE "StorageCell Event"
--#SUMMARY "SCellName-TimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."
--#ARGUMENTS {0,1,2,3,4,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
--#STATE WARNING
::= 13602413
sCellEventTrap96e TRAP-TYPE -- CAC Code: 0
ENTERPRISE compaq
VARIABLES { scellNameDateTime,
scellSWComponent,
scellECode,
scellCAC,
scellEIP}
DESCRIPTION
"Severity: Normal -- informational in nature. The Write Protected state of the Derived Unit identified in the handle field has changed. This Derived Unit is associated with the Virtual Disk identified in the addHandle field. The secondaryId field contains the noid portion of the handle for the Storage System Virtual Disk associated with the Derived Unit. The oldAttr.type field and the newAttr.type fields contain the value 1. The oldAttr.value.u32[0] field contains the old Write Protected state. The newAttr.value.u32[0] field contains the new Write Protected state. The Write Protected state values that may be found in the oldAttr.value.u32[0] and newAttr.value.u32[0] fields are as follows: - 0 = Write protect off
- 1 = Write protect on
This Derived Unit is associated with the Virtual Disk identified in the addHandle field."
--#TYPE "StorageCell Event"
--#SUMMARY "SCellName-TimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."
--#ARGUMENTS {0,1,2,3,4,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
--#STATE WARNING
::= 13602414
sCellEventTrap970 TRAP-TYPE -- CAC Code: 46
ENTERPRISE compaq
VARIABLES { scellNameDateTime,
scellSWComponent,
scellECode,
scellCAC,
scellEIP}
DESCRIPTION
"Severity: Warning -- not failed but attention recommended or required. The Physical Disk Drive identified in the handle field has experienced numerous communication failures on a particular Fibre Channel port identified in the newAttr.value.str field. The oldAttr.value.u32[0] field contains the internal port ID. The enclosure number, bay number, and rack number where the Physical Disk Drive is located are contained in the oldAttr.value.u32[1], oldAttr.value.u32[2], oldAttr.value.u32[3] fields, respectively. The oldAttr.type field contains value 1. The newAttr.value.str field contains the cerpId of the Fibre Channel port. The newAttr.type field contains value 4."
--#TYPE "StorageCell Event"
--#SUMMARY "SCellName-TimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."
--#ARGUMENTS {0,1,2,3,4,}
--#SEVERITY MINOR
--#TIMEINDEX 136
--#STATE WARNING
::= 13602416
sCellEventTrap971 TRAP-TYPE -- CAC Code: 0
ENTERPRISE compaq
VARIABLES { scellNameDateTime,
scellSWComponent,
scellECode,
scellCAC,
scellEIP}
DESCRIPTION
"Severity: Normal -- informational in nature. The HSV110 controller identified in the handle field received a request to shutdown. The oldAttr.type field and field contain the value 1. The oldAttr.value.u32[0] field indicates the type of restart that was requested as follows:
- 0 = None -- no restart
- 1 = Regular -- full restart, host system connectivity is lost until the controller returns to normal operation
- 2 = Fast -- resynchronization, restart of the controller in a manner that has little or no impact on host system connectivity
The oldAttr.value.u32[1] field indicates whether the other HSV110 controller of the pair was requested to remain operational or to also shutdown as follows:
- 0 = Remain operational
- 1 = Coupled shutdown
The oldAttr.value.u32[2] field indicates whether the HSV110 controller was requested to remain in the power on state or power itself off as follows:
- 0 = Remain in the power on state
- 1 = Power itself off
The oldAttr.value.u32[3] field value indicates whether the Physical Disk Drive enclosure(s) was requested to remain in the power on state or to be powered off as follows:
- 0 = Remain in the power on state
- 1 = Powered off
The oldAttr.value.u32[4] field value indicates whether the battery assemblies located within the HSV110 controller were requested to be enabled or disabled as follows:
The oldAttr.value.u32[5] field contains the number of seconds the shutdown operation was requested to be delayed."
--#TYPE "StorageCell Event"
--#SUMMARY "SCellName-TimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."
--#ARGUMENTS {0,1,2,3,4,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
--#STATE WARNING
::= 13602417
sCellEventTrap972 TRAP-TYPE -- CAC Code: 0
ENTERPRISE compaq
VARIABLES { scellNameDateTime,
scellSWComponent,
scellECode,
scellCAC,
scellEIP}
DESCRIPTION
"Severity: Normal -- informational in nature. The HSV110 controller identified in the handle field has completed its shutdown preparations.
The oldAttr.type field contain the value 1. The oldAttr.value.u32[0] field value indicates the result of the HSV110 controller Cache Memory shutdown operation as follows:
- 1 = Success
- 2 = Failure
- 3 = Not applicable
The oldAttr.value.u32[1] field contains the internal Storage System Management Interface cache shutdown status code.
The oldAttr.value.u32[2] field value indicates the result of the Physical Disk Drive enclosure(s) power off operation as follows:
- 1 = Success
- 2 = Failure
- 3 = Not applicable
The oldAttr.value.u32[3] field contains the internal Storage System Management Interface Physical Disk Drive enclosure(s) power off status code.
The oldAttr.value.u32[4] field value indicates the result of the battery assemblies disable operation as follows:
- 1 = Success
- 2 = Failure
- 3 = Not applicable
The oldAttr.value.u32[5] field value indicates the battery assemblies disable operation failure mode as follows:
- 0 = No failure indicated.
- 1 = Failed only on the HSV110 controller identified in the handle field.
- 2 = Failed only on the other HSV110 controller of the pair.
- 3 = Failed on both HSV110 controllers.
"
--#TYPE "StorageCell Event"
--#SUMMARY "SCellName-TimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."
--#ARGUMENTS {0,1,2,3,4,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
--#STATE WARNING
::= 13602418
sCellEventTrap973 TRAP-TYPE -- CAC Code: 0
ENTERPRISE compaq
VARIABLES { scellNameDateTime,
scellSWComponent,
scellECode,
scellCAC,
scellEIP}
DESCRIPTION
"Severity: Normal -- informational in nature. The Failsafe state of the Data Replication Group identified in the handle field has changed. The oldAttr.value.u32[0] field contains the old Failsafe state. The newAttr.value.u32[0] field contains the new Failsafe state. The Failsafe state values that may be found in the oldAttr.value.u32[0] and newAttr.value.u32[0] fields are as follows: - 1 = Failsafe Disabled
- 2 = Failsafe Enabled
"
--#TYPE "StorageCell Event"
--#SUMMARY "SCellName-TimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."
--#ARGUMENTS {0,1,2,3,4,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
--#STATE WARNING
::= 13602419
sCellEventTrap974 TRAP-TYPE -- CAC Code: 0
ENTERPRISE compaq
VARIABLES { scellNameDateTime,
scellSWComponent,
scellECode,
scellCAC,
scellEIP}
DESCRIPTION
"Severity: Normal -- informational in nature. The Mode of the Data Replication Group identified in the handle field has changed. The oldAttr.value.u32[0] field contains the old Mode. The newAttr.value.u32[0] field contains the new Mode. The Mode values that may be found in the oldAttr.value.u32[0] and newAttr.value.u32[0] fields are as follows: - 0 = Normal Active Source
- 1 = Normal Active Destination
- 2 = Active/Active (Master)
- 3 = Active/Active (Non-Master)
"
--#TYPE "StorageCell Event"
--#SUMMARY "SCellName-TimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."
--#ARGUMENTS {0,1,2,3,4,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
--#STATE WARNING
::= 13602420
sCellEventTrap975 TRAP-TYPE -- CAC Code: 0
ENTERPRISE compaq
VARIABLES { scellNameDateTime,
scellSWComponent,
scellECode,
scellCAC,
scellEIP}
DESCRIPTION
"Severity: Normal -- informational in nature. The Operational state of a Data Replication Group has changed to Synchronous or Asynchronous. The oldAttr.value.u32[0] field contains the old Operation state. The newAttr.value.u32[0] field contains the new Operation state. The Operation state values that may be found in the oldAttr.value.u32[0] and newAttr.value.u32[0] fields are as follows: - 1 = Synchronous
- 2 = Asynchronous
"
--#TYPE "StorageCell Event"
--#SUMMARY "SCellName-TimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."
--#ARGUMENTS {0,1,2,3,4,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
--#STATE WARNING
::= 13602421
sCellEventTrap976 TRAP-TYPE -- CAC Code: 0
ENTERPRISE compaq
VARIABLES { scellNameDateTime,
scellSWComponent,
scellECode,
scellCAC,
scellEIP}
DESCRIPTION
"Severity: Normal -- informational in nature. The Read Only attribute of the Data Replication Group identified in the handle field has changed. The oldAttr.value.u32[0] field contains the old Read Only attribute. The newAttr.value.u32[0] field contains the new Read Only attribute. The Read Only attribute values that may be found in the oldAttr.value.u32[0] and newAttr.value.u32[0] fields are as follows: - 0 = Data Replication Destination Storage System Virtual Disk disabled for read access.
- 1 = Data Replication Destination Storage System Virtual Disk enabled for read access.
"
--#TYPE "StorageCell Event"
--#SUMMARY "SCellName-TimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."
--#ARGUMENTS {0,1,2,3,4,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
--#STATE WARNING
::= 13602422
sCellEventTrap977 TRAP-TYPE -- CAC Code: 0
ENTERPRISE compaq
VARIABLES { scellNameDateTime,
scellSWComponent,
scellECode,
scellCAC,
scellEIP}
DESCRIPTION
"Severity: Normal -- informational in nature. A Data Replication Group failover has occurred. The handle field contains the identity of the Data Replication Group. The oldAttr.value.u32[0] field contains the old Role. The newAttr.value.u32[0] field contains the new Role. - 0 = Normal Active Source
- 1 = Normal Active Destination
- 2 = Active/Active (Master)
- 3 = Active/Active (Non-Master)
"
--#TYPE "StorageCell Event"
--#SUMMARY "SCellName-TimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."
--#ARGUMENTS {0,1,2,3,4,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
--#STATE WARNING
::= 13602423
sCellEventTrap978 TRAP-TYPE -- CAC Code: 0
ENTERPRISE compaq
VARIABLES { scellNameDateTime,
scellSWComponent,
scellECode,
scellCAC,
scellEIP}
DESCRIPTION
"Severity: Normal -- informational in nature. A Data Replication Group has been suspended or resumed. The handle field contains the identity of the Data Replication Group. The oldAttr.value.u32[0] field contains the old Suspend state. The newAttr.value.u32[0] field contains the new Suspend state. The Suspend state values that may be found in the oldAttr.value.u32[0] and newAttr.value.u32[0] fields are as follows: - 1 = Connection between the Data Replication Source and Data Replication Destination is active.
- 2 = Connection between the Data Replication Source and Data Replication Destination is inactive.
"
--#TYPE "StorageCell Event"
--#SUMMARY "SCellName-TimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."
--#ARGUMENTS {0,1,2,3,4,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
--#STATE WARNING
::= 13602424
sCellEventTrap979 TRAP-TYPE -- CAC Code: 0
ENTERPRISE compaq
VARIABLES { scellNameDateTime,
scellSWComponent,
scellECode,
scellCAC,
scellEIP}
DESCRIPTION
"Severity: Normal -- informational in nature. A Storage System Virtual Disk was added to a Data Replication Group. The Storage System Virtual Disk is identified in the addHandle field. The Data Replication Group is identified in the handle field."
--#TYPE "StorageCell Event"
--#SUMMARY "SCellName-TimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."
--#ARGUMENTS {0,1,2,3,4,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
--#STATE WARNING
::= 13602425
sCellEventTrap97a TRAP-TYPE -- CAC Code: 0
ENTERPRISE compaq
VARIABLES { scellNameDateTime,
scellSWComponent,
scellECode,
scellCAC,
scellEIP}
DESCRIPTION
"Severity: Normal -- informational in nature. A Storage System Virtual Disk was removed from a Data Replication Group. The Storage System Virtual Disk is identified in the addHandle field. The Data Replication Group is identified in the handle field."
--#TYPE "StorageCell Event"
--#SUMMARY "SCellName-TimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."
--#ARGUMENTS {0,1,2,3,4,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
--#STATE WARNING
::= 13602426
sCellEventTrap9C8 TRAP-TYPE -- CAC Code: 51
ENTERPRISE compaq
VARIABLES { scellNameDateTime,
scellSWComponent,
scellECode,
scellCAC,
scellEIP}
DESCRIPTION
"Severity: Undetermined -- more information needed to determine severity. The Data Availability state of the internal Logical Disk associated with the Virtual Disk identified in the handle field has transitioned to the DATA LOST state. The value.ul1 field contains the new state: 1 (DATA LOST). The value.ul2 field contains the old state: 0 (NORMAL)."
--#TYPE "StorageCell Event"
--#SUMMARY "SCellName-TimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."
--#ARGUMENTS {0,1,2,3,4,}
--#SEVERITY CRITICAL
--#TIMEINDEX 136
--#STATE WARNING
::= 13602504
sCellEventTrap9C9 TRAP-TYPE -- CAC Code: 51
ENTERPRISE compaq
VARIABLES { scellNameDateTime,
scellSWComponent,
scellECode,
scellCAC,
scellEIP}
DESCRIPTION
"Severity: Undetermined -- more information needed to determine severity. The state of the Disk Group identified in the handle field has transitioned to an INOPERATIVE state. The value.ul1 field contains the new Disk Group state. The value.ul2 field contains the old Disk Group state. The state values that may be found in the value.ul1 and value.ul2 fields are as follows: - 1 = Normal
- 2 = Disk Group with no redundancy is inoperative
- 3 = Disk Group with parity redundancy is inoperative
- 4 = Disk Group with mirrored redundancy is inoperative
- 5 = Disk Group with no redundancy is inoperative, marked for re-use
- 6 = Disk Group with parity redundancy is inoperative, marked for re-use
- 7 = Disk Group with mirrored redundancy is inoperative, marked for re-use
"
--#TYPE "StorageCell Event"
--#SUMMARY "SCellName-TimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."
--#ARGUMENTS {0,1,2,3,4,}
--#SEVERITY CRITICAL
--#TIMEINDEX 136
--#STATE WARNING
::= 13602505
sCellEventTrap9Ca TRAP-TYPE -- CAC Code: 51
ENTERPRISE compaq
VARIABLES { scellNameDateTime,
scellSWComponent,
scellECode,
scellCAC,
scellEIP}
DESCRIPTION
"Severity: Undetermined -- more information needed to determine severity. The state of the internal Logical Disk associated with the Virtual Disk identified in the handle field has transitioned to the FAILED state. The value.ul1 field contains the new state: 5 (FAILED). The value.ul2 field contains the old state. The state values that may be found in the value.ul2 field are as follows: - 1 = Normal
- 2 = Replacement delay in progress
- 3 = Redundancy lost, restore in progress
- 4 = Redundancy lost, restore stalled
- 6 = Creation in progress
- 7 = Snapshot is inoperative due to lack of snapshot space
- 8 = Deletion in progress
- 9 = Capacity change in progress
- 10 = Inoperative due to data lost
- 11 = Capacity reservation in progress
- 12 = Capacity unreservation in progress
"
--#TYPE "StorageCell Event"
--#SUMMARY "SCellName-TimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."
--#ARGUMENTS {0,1,2,3,4,}
--#SEVERITY CRITICAL
--#TIMEINDEX 136
--#STATE WARNING
::= 13602506
sCellEventTrap9Cb TRAP-TYPE -- CAC Code: 50
ENTERPRISE compaq
VARIABLES { scellNameDateTime,
scellSWComponent,
scellECode,
scellCAC,
scellEIP}
DESCRIPTION
"Severity: Critical -- failure or failure imminent. The state of the internal Logical Disk associated with the Virtual Disk identified in the handle field has transitioned to the SNAPSHOT OVERCOMMIT state. The value.ul1 field contains the new state: 7 (SNAPSHOT OVERCOMMIT). The value.ul2 field contains the old state. The state values that may be found in the value.ul2 field are as follows: - 1 = Normal
- 2 = Replacement delay in progress
- 3 = Redundancy lost, restore in progress
- 4 = Redundancy lost, restore stalled
- 5 = Failed
- 6 = Creation in progress
- 8 = Deletion in progress
- 9 = Capacity change in progress
- 10 = Inoperative due to device data lost
- 11 = Capacity reservation in progress
- 12 = Capacity unreservation in progress
"
--#TYPE "StorageCell Event"
--#SUMMARY "SCellName-TimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."
--#ARGUMENTS {0,1,2,3,4,}
--#SEVERITY CRITICAL
--#TIMEINDEX 136
--#STATE WARNING
::= 13602507
sCellEventTrap9Cc TRAP-TYPE -- CAC Code: 51
ENTERPRISE compaq
VARIABLES { scellNameDateTime,
scellSWComponent,
scellECode,
scellCAC,
scellEIP}
DESCRIPTION
"Severity: Undetermined -- more information needed to determine severity. The state of the internal Logical Disk associated with the Virtual Disk identified in the handle field has transitioned to the DEVICE DATA LOST state. The value.ul1 field contains the new state: 10 (DEVICE DATA LOST). The value.ul2 field contains the old state. The state values that may be found in the value.ul2 field are as follows: - 1 = Normal
- 2 = Replacement delay in progress
- 3 = Redundancy lost restore, in progress
- 4 = Redundancy lost restore, stalled
- 5 = Failed
- 6 = Creation in progress
- 7 = Snapshot is inoperative due to lack of snapshot space
- 8 = Deletion in progress
- 9 = Capacity change in progress
- 11 = Capacity reservation in progress
- 12 = Capacity unreservation in progress
"
--#TYPE "StorageCell Event"
--#SUMMARY "SCellName-TimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."
--#ARGUMENTS {0,1,2,3,4,}
--#SEVERITY CRITICAL
--#TIMEINDEX 136
--#STATE WARNING
::= 13602508
sCellEventTrap9Cd TRAP-TYPE -- CAC Code: c3
ENTERPRISE compaq
VARIABLES { scellNameDateTime,
scellSWComponent,
scellECode,
scellCAC,
scellEIP}
DESCRIPTION
"Severity: Undetermined -- more information needed to determine severity. The state of the Fibre Channel port identified in the attribute.value.str field and located on the rear panel of the HSV110 controller identified in the handle field has transitioned to the FAILED state. The attribute.type field contains the value 4. The value.ul1 field contains the new state: 2 (FAILED). The value.ul2 field contains the old state: 1 (NORMAL). Note that the HSV110 controller's internal identity of the affected Fibre Channel port is contained in the secondaryId field."
--#TYPE "StorageCell Event"
--#SUMMARY "SCellName-TimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."
--#ARGUMENTS {0,1,2,3,4,}
--#SEVERITY CRITICAL
--#TIMEINDEX 136
--#STATE WARNING
::= 13602509
sCellEventTrap9Ce TRAP-TYPE -- CAC Code: 0
ENTERPRISE compaq
VARIABLES { scellNameDateTime,
scellSWComponent,
scellECode,
scellCAC,
scellEIP}
DESCRIPTION
"Severity: Normal -- informational in nature. The state of the Disk Group identified in the handle field has transitioned to an INOPERATIVE MARKED state. The value.ul1 field contains the new Disk Group state. The value.ul2 field contains the old Disk Group state. The state values that may be found in the value.ul1 and value.ul2 fields are as follows:
- 1 = Normal
- 2 = Disk Group with no redundancy is inoperative
- 3 = Disk Group with parity redundancy is inoperative
- 4 = Disk Group with mirrored redundancy is inoperative
- 5 = Disk Group with no redundancy is inoperative, marked for re-use
- 6 = Disk Group with parity redundancy is inoperative, marked for re-use
- 7 = Disk Group with mirrored redundancy is inoperative, marked for re-use
"
--#TYPE "StorageCell Event"
--#SUMMARY "SCellName-TimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."
--#ARGUMENTS {0,1,2,3,4,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
--#STATE WARNING
::= 13602510
sCellEventTrap9Cf TRAP-TYPE -- CAC Code: 41
ENTERPRISE compaq
VARIABLES { scellNameDateTime,
scellSWComponent,
scellECode,
scellCAC,
scellEIP}
DESCRIPTION
"Severity: Warning -- not failed but attention recommended or required. The state of the Physical Disk Drive identified in the handle field has transitioned to the NOT PRESENT state. The value.ul1 field contains the new state: 4 (NOT PRESENT). The value.ul2 field contains the old state. The state values that may be in the value.ul2 field are as follows: - 1 = Normal
- 2 = Degraded
- 3 = Failed
- 5 = Single Port on Fibre
The enclosure number, bay number, and rack number where the Physical Disk Drive is located are contained in the attribute.value.u32[0], attribute.value.u32[1], attribute.value.u32[2] fields, respectively. The attribute.type field contains value 1. The rack number in the attribute.value.u32[2] field will not contain a valid value until a future release."
--#TYPE "StorageCell Event"
--#SUMMARY "SCellName-TimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."
--#ARGUMENTS {0,1,2,3,4,}
--#SEVERITY MINOR
--#TIMEINDEX 136
--#STATE WARNING
::= 13602511
sCellEventTrap9D0 TRAP-TYPE -- CAC Code: 0
ENTERPRISE compaq
VARIABLES { scellNameDateTime,
scellSWComponent,
scellECode,
scellCAC,
scellEIP}
DESCRIPTION
"Severity: Normal -- informational in nature. The HSV110 controller identified in the handle field no longer needs attention."
--#TYPE "StorageCell Event"
--#SUMMARY "SCellName-TimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."
--#ARGUMENTS {0,1,2,3,4,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
--#STATE WARNING
::= 13602512
sCellEventTrap9D1 TRAP-TYPE -- CAC Code: b9
ENTERPRISE compaq
VARIABLES { scellNameDateTime,
scellSWComponent,
scellECode,
scellCAC,
scellEIP}
DESCRIPTION
"Severity: Undetermined -- more information needed to determine severity. The HSV110 controller identified in the handle field needs attention."
--#TYPE "StorageCell Event"
--#SUMMARY "SCellName-TimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."
--#ARGUMENTS {0,1,2,3,4,}
--#SEVERITY CRITICAL
--#TIMEINDEX 136
--#STATE WARNING
::= 13602513
sCellEventTrap9D2 TRAP-TYPE -- CAC Code: 2a
ENTERPRISE compaq
VARIABLES { scellNameDateTime,
scellSWComponent,
scellECode,
scellCAC,
scellEIP}
DESCRIPTION
"Severity: Critical -- failure or failure imminent. The Blower Present flag for the '1' blower assembly located within the HSV110 controller identified in the handle field has transitioned from the PRESENT to NOT PRESENT state indicating that the blower has been removed. The secondaryId field contains the '1' blower assembly internal identifier value: 1. The value.ul1 field contains the new state of the Blower Present flag: 0 (NOT PRESENT). The value.ul2 field contains the old state of the Blower Present flag: 1 (PRESENT)."
--#TYPE "StorageCell Event"
--#SUMMARY "SCellName-TimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."
--#ARGUMENTS {0,1,2,3,4,}
--#SEVERITY CRITICAL
--#TIMEINDEX 136
--#STATE WARNING
::= 13602514
sCellEventTrap9D3 TRAP-TYPE -- CAC Code: 51
ENTERPRISE compaq
VARIABLES { scellNameDateTime,
scellSWComponent,
scellECode,
scellCAC,
scellEIP}
DESCRIPTION
"Severity: Undetermined -- more information needed to determine severity. At least one Virtual Disk associated with the Data Replication Group identified in the handle field has transitioned to the INOPERATIVE state. The remaining Virtual Disks associated with this Data Replication Group have been forced INOPERATIVE. The value.ul1 field contains the new Data Replication Group member state: 2 (INOPERATIVE). The value.ul2 field contains the old Data Replication Group member state: 1 (OPERATIVE)."
--#TYPE "StorageCell Event"
--#SUMMARY "SCellName-TimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."
--#ARGUMENTS {0,1,2,3,4,}
--#SEVERITY CRITICAL
--#TIMEINDEX 136
--#STATE WARNING
::= 13602515
sCellEventTrap9D4 TRAP-TYPE -- CAC Code: 0
ENTERPRISE compaq
VARIABLES { scellNameDateTime,
scellSWComponent,
scellECode,
scellCAC,
scellEIP}
DESCRIPTION
"Severity: Normal -- informational in nature. All the Virtual Disks associated with the Data Replication Group identified in the handle field have transitioned to the OPERATIVE state. The value.ul1 field contains the new Data Replication Group member state: 1 (OPERATIVE). The value.ul2 field contains the old Data Replication Group member state: 2 (INOPERATIVE)."
--#TYPE "StorageCell Event"
--#SUMMARY "SCellName-TimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."
--#ARGUMENTS {0,1,2,3,4,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
--#STATE WARNING
::= 13602516
sCellEventTrap9D5 TRAP-TYPE -- CAC Code: 0
ENTERPRISE compaq
VARIABLES { scellNameDateTime,
scellSWComponent,
scellECode,
scellCAC,
scellEIP}
DESCRIPTION
"Severity: Normal -- informational in nature. The state of the Physical Disk Drive identified in the handle field has transitioned to the Single Port on Fibre state. The value.ul1 field contains the new state: 5 (SINGLE PORT ON FIBRE). The value.ul2 field contains the old state. The state values that may be in the value.ul2 field are as follows: - 1 = Normal
- 2 = Degraded
- 3 = Failed
- 4 = Not Present
The enclosure number, bay number, and rack number where the Physical Disk Drive is located are contained in the attribute.value.u32[0], attribute.value.u32[1], attribute.value.u32[2] fields, respectively. The attribute.type field contains value 1. The rack number in the attribute.value.u32[2] field will not contain a valid value until a future release."
--#TYPE "StorageCell Event"
--#SUMMARY "SCellName-TimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."
--#ARGUMENTS {0,1,2,3,4,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
--#STATE WARNING
::= 13602517
sCellEventTrap9D6 TRAP-TYPE -- CAC Code: 0
ENTERPRISE compaq
VARIABLES { scellNameDateTime,
scellSWComponent,
scellECode,
scellCAC,
scellEIP}
DESCRIPTION
"Severity: Normal -- informational in nature. The HSV110 controller identified in the handle field has been shutdown because the temperature sensors do not agree and the system temperature can not be accurately determined. The value.ul1 field contains the current temperature reported in celsius from I2C sensor 1, while the value.ul2 field contains the reading from I2C sensor 2."
--#TYPE "StorageCell Event"
--#SUMMARY "SCellName-TimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."
--#ARGUMENTS {0,1,2,3,4,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
--#STATE WARNING
::= 13602518
sCellEventTrap9D7 TRAP-TYPE -- CAC Code: 0
ENTERPRISE compaq
VARIABLES { scellNameDateTime,
scellSWComponent,
scellECode,
scellCAC,
scellEIP}
DESCRIPTION
"Severity: Normal -- informational in nature. The HSV110 controller identified in the handle field has been shutdown because the temperature sensors can not be accessed and the system temperature can not be accurately determined. The value.ul1 field contains the status from the attempted I2C access."
--#TYPE "StorageCell Event"
--#SUMMARY "SCellName-TimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."
--#ARGUMENTS {0,1,2,3,4,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
--#STATE WARNING
::= 13602519
sCellEventTrapB0 TRAP-TYPE -- CAC Code: 0
ENTERPRISE compaq
VARIABLES { scellNameDateTime,
scellSWComponent,
scellECode,
scellCAC,
scellEIP}
DESCRIPTION
"Severity: Normal -- informational in nature. The HSV110 controller identified by the nodeName field has begun a resynchronization operation (i.e., a restart of the controllers in a manner that has little or no impact on host system connectivity). The information.pc field contains the program counter of resynchronization operation initiator. The information.flags field contains reboot flags value. The information.code field contains the resynchronization operation event code value."
--#TYPE "StorageCell Event"
--#SUMMARY "SCellName-TimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."
--#ARGUMENTS {0,1,2,3,4,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
--#STATE WARNING
::= 13602816
sCellEventTrapC0 TRAP-TYPE -- CAC Code: 0
ENTERPRISE compaq
VARIABLES { scellNameDateTime,
scellSWComponent,
scellECode,
scellCAC,
scellEIP}
DESCRIPTION
"Severity: Normal -- informational in nature. The specified Destination Virtual Disk has successfully completed a Full Copy. The following fields are not valid: status, blocks, vda."
--#TYPE "StorageCell Event"
--#SUMMARY "SCellName-TimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."
--#ARGUMENTS {0,1,2,3,4,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
--#STATE WARNING
::= 13603072
sCellEventTrapC1 TRAP-TYPE -- CAC Code: 5f
ENTERPRISE compaq
VARIABLES { scellNameDateTime,
scellSWComponent,
scellECode,
scellCAC,
scellEIP}
DESCRIPTION
"Severity: Critical -- failure or failure imminent. The specified Source Virtual Disk has transitioned to the Logging state because the alternate Storage System is not accessible or the Data Replication Group is suspended. The following fields are not valid: status, blocks, vda, port, cerpId, side."
--#TYPE "StorageCell Event"
--#SUMMARY "SCellName-TimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."
--#ARGUMENTS {0,1,2,3,4,}
--#SEVERITY CRITICAL
--#TIMEINDEX 136
--#STATE WARNING
::= 13603073
sCellEventTrapC2 TRAP-TYPE -- CAC Code: 61
ENTERPRISE compaq
VARIABLES { scellNameDateTime,
scellSWComponent,
scellECode,
scellCAC,
scellEIP}
DESCRIPTION
"Severity: Critical -- failure or failure imminent. The specified Source Virtual Disk has transitioned to the Logging state because the Destination Virtual Disk is not accessible. The following fields are not valid: status, blocks, vda, port, cerpId, side."
--#TYPE "StorageCell Event"
--#SUMMARY "SCellName-TimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."
--#ARGUMENTS {0,1,2,3,4,}
--#SEVERITY CRITICAL
--#TIMEINDEX 136
--#STATE WARNING
::= 13603074
sCellEventTrapC3 TRAP-TYPE -- CAC Code: 0
ENTERPRISE compaq
VARIABLES { scellNameDateTime,
scellSWComponent,
scellECode,
scellCAC,
scellEIP}
DESCRIPTION
"Severity: Normal -- informational in nature. The specified Destination Virtual Disk has transitioned to the Merging state, because the alternate Storage System or Destination Virtual Disk is now accessible or resumed. The following fields are not valid: status, blocks, vda."
--#TYPE "StorageCell Event"
--#SUMMARY "SCellName-TimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."
--#ARGUMENTS {0,1,2,3,4,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
--#STATE WARNING
::= 13603075
sCellEventTrapC4 TRAP-TYPE -- CAC Code: 5f
ENTERPRISE compaq
VARIABLES { scellNameDateTime,
scellSWComponent,
scellECode,
scellCAC,
scellEIP}
DESCRIPTION
"Severity: Critical -- failure or failure imminent. A Data Replication Group has entered the Failsafe Locked state due to an inaccessible or inoperative destination. Either the Destination Virtual Disk is not accessible or a Virtual Disk in the Data Replication Group is inoperative. The following fields are not valid: status, blocks, vda, port, cerpId, side."
--#TYPE "StorageCell Event"
--#SUMMARY "SCellName-TimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."
--#ARGUMENTS {0,1,2,3,4,}
--#SEVERITY CRITICAL
--#TIMEINDEX 136
--#STATE WARNING
::= 13603076
sCellEventTrapC5 TRAP-TYPE -- CAC Code: 60
ENTERPRISE compaq
VARIABLES { scellNameDateTime,
scellSWComponent,
scellECode,
scellCAC,
scellEIP}
DESCRIPTION
"Severity: Critical -- failure or failure imminent. A Data Replication Group has entered the Failsafe Locked state due to an inoperative source. Either the Source Virtual Disk is not accessible or a Virtual Disk in the Data Replication Group is inoperative. The following fields are not valid: status, blocks, vda, port, cerpId, side."
--#TYPE "StorageCell Event"
--#SUMMARY "SCellName-TimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."
--#ARGUMENTS {0,1,2,3,4,}
--#SEVERITY CRITICAL
--#TIMEINDEX 136
--#STATE WARNING
::= 13603077
sCellEventTrapC6 TRAP-TYPE -- CAC Code: 60
ENTERPRISE compaq
VARIABLES { scellNameDateTime,
scellSWComponent,
scellECode,
scellCAC,
scellEIP}
DESCRIPTION
"Severity: Critical -- failure or failure imminent. An unrecoverable read error occurred on the specified Source Virtual Disk during the Full Copy. The Virtual Disk address specified in the vda field indicates the first block in error. The Full Copy was terminated."
--#TYPE "StorageCell Event"
--#SUMMARY "SCellName-TimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."
--#ARGUMENTS {0,1,2,3,4,}
--#SEVERITY CRITICAL
--#TIMEINDEX 136
--#STATE WARNING
::= 13603078
sCellEventTrapC7 TRAP-TYPE -- CAC Code: 5f
ENTERPRISE compaq
VARIABLES { scellNameDateTime,
scellSWComponent,
scellECode,
scellCAC,
scellEIP}
DESCRIPTION
"Severity: Critical -- failure or failure imminent. A Full Copy terminated prior to completion. A remote copy error occurred due to an inaccessible alternate Storage System. The Virtual Disk address specified in the vda field indicates the first block in error. The Full Copy will continue when the Data Replication Destination is restored."
--#TYPE "StorageCell Event"
--#SUMMARY "SCellName-TimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."
--#ARGUMENTS {0,1,2,3,4,}
--#SEVERITY CRITICAL
--#TIMEINDEX 136
--#STATE WARNING
::= 13603079
sCellEventTrapC8 TRAP-TYPE -- CAC Code: 61
ENTERPRISE compaq
VARIABLES { scellNameDateTime,
scellSWComponent,
scellECode,
scellCAC,
scellEIP}
DESCRIPTION
"Severity: Critical -- failure or failure imminent. A Full Copy terminated prior to completion. A remote copy error occurred due to an inaccessible Destination Virtual Disk. The Virtual Disk address specified in the vda field indicates the first block in error. The Full Copy will continue when the Data Replication Destination is restored."
--#TYPE "StorageCell Event"
--#SUMMARY "SCellName-TimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."
--#ARGUMENTS {0,1,2,3,4,}
--#SEVERITY CRITICAL
--#TIMEINDEX 136
--#STATE WARNING
::= 13603080
sCellEventTrapC9 TRAP-TYPE -- CAC Code: 62
ENTERPRISE compaq
VARIABLES { scellNameDateTime,
scellSWComponent,
scellECode,
scellCAC,
scellEIP}
DESCRIPTION
"Severity: Warning -- not failed but attention recommended or required. A Data Replication Log has been reset due to insufficient Disk Group capacity. The Data Replication Destination has been marked for a Full Copy. The following fields are not valid: status, blocks, vda, port, cerpId, side."
--#TYPE "StorageCell Event"
--#SUMMARY "SCellName-TimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."
--#ARGUMENTS {0,1,2,3,4,}
--#SEVERITY MINOR
--#TIMEINDEX 136
--#STATE WARNING
::= 13603081
sCellEventTrapCA TRAP-TYPE -- CAC Code: 0
ENTERPRISE compaq
VARIABLES { scellNameDateTime,
scellSWComponent,
scellECode,
scellCAC,
scellEIP}
DESCRIPTION
"Severity: Normal -- informational in nature. A Data Replication Log has been reset due to a Data Replication Group failover. The following fields are not valid: status, blocks, vda."
--#TYPE "StorageCell Event"
--#SUMMARY "SCellName-TimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."
--#ARGUMENTS {0,1,2,3,4,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
--#STATE WARNING
::= 13603082
sCellEventTrapCC TRAP-TYPE -- CAC Code: 0
ENTERPRISE compaq
VARIABLES { scellNameDateTime,
scellSWComponent,
scellECode,
scellCAC,
scellEIP}
DESCRIPTION
"Severity: Normal -- informational in nature. A Destination Data Replication Group has successfully completed a Merge. The following fields are not valid: status, blocks, vda."
--#TYPE "StorageCell Event"
--#SUMMARY "SCellName-TimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."
--#ARGUMENTS {0,1,2,3,4,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
--#STATE WARNING
::= 13603084
sCellEventTrapCF TRAP-TYPE -- CAC Code: 0
ENTERPRISE compaq
VARIABLES { scellNameDateTime,
scellSWComponent,
scellECode,
scellCAC,
scellEIP}
DESCRIPTION
"Severity: Normal -- informational in nature. A Data Replication Group is no longer in a Failsafe Locked state. The following fields are not valid: status, blocks, vda, port, cerpId, side."
--#TYPE "StorageCell Event"
--#SUMMARY "SCellName-TimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."
--#ARGUMENTS {0,1,2,3,4,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
--#STATE WARNING
::= 13603087
sCellEventTrapC10 TRAP-TYPE -- CAC Code: 0
ENTERPRISE compaq
VARIABLES { scellNameDateTime,
scellSWComponent,
scellECode,
scellCAC,
scellEIP}
DESCRIPTION
"Severity: Normal -- informational in nature. A Destination Data Replication Group has been marked for a Full Copy. The following fields are not valid: status, blocks, vda."
--#TYPE "StorageCell Event"
--#SUMMARY "SCellName-TimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."
--#ARGUMENTS {0,1,2,3,4,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
--#STATE WARNING
::= 13603088
sCellEventTrapC11 TRAP-TYPE -- CAC Code: 0
ENTERPRISE compaq
VARIABLES { scellNameDateTime,
scellSWComponent,
scellECode,
scellCAC,
scellEIP}
DESCRIPTION
"Severity: Normal -- informational in nature. A Storage System has discovered that a Data Replication Group failover has taken place. This Virtual Disk is transitioning from a Data Replication Source role to a Data Replication Destination role. The following fields are not valid: status, blocks, vda."
--#TYPE "StorageCell Event"
--#SUMMARY "SCellName-TimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."
--#ARGUMENTS {0,1,2,3,4,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
--#STATE WARNING
::= 13603089
sCellEventTrapC12 TRAP-TYPE -- CAC Code: 0
ENTERPRISE compaq
VARIABLES { scellNameDateTime,
scellSWComponent,
scellECode,
scellCAC,
scellEIP}
DESCRIPTION
"Severity: Normal -- informational in nature. This Data Replication Group is transitioning from a Data Replication Destination role to a Data Replication Source role. The following fields are not valid: status, blocks, vda."
--#TYPE "StorageCell Event"
--#SUMMARY "SCellName-TimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."
--#ARGUMENTS {0,1,2,3,4,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
--#STATE WARNING
::= 13603090
sCellEventTrapC15 TRAP-TYPE -- CAC Code: 0
ENTERPRISE compaq
VARIABLES { scellNameDateTime,
scellSWComponent,
scellECode,
scellCAC,
scellEIP}
DESCRIPTION
"Severity: Normal -- informational in nature. The Data Replication Path between this Site and the Alternate Site has closed, possibly due to a connection failure between the specified host port and the Alternate Site. The following fields are not valid: groupNameUuid, groupUuid, sourceScvdUuid, status, block, vda."
--#TYPE "StorageCell Event"
--#SUMMARY "SCellName-TimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."
--#ARGUMENTS {0,1,2,3,4,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
--#STATE WARNING
::= 13603093
sCellEventTrapD0 TRAP-TYPE -- CAC Code: 1
ENTERPRISE compaq
VARIABLES { scellNameDateTime,
scellSWComponent,
scellECode,
scellCAC,
scellEIP}
DESCRIPTION
"Severity: Critical -- failure or failure imminent. Unrecognized event reported by a Drive Enclosure Environmental Monitoring Unit. The handle field contains the WWN of the drive enclosure containing the Drive Enclosure Environmental Monitoring Unit. The event was reported by the Drive Enclosure Environmental Monitoring Unit located in the drive enclosure determined by the content of the denclNum field as follows: - If denclNum is less than 99, the location is as indicated by the content of the rackNum and denclNum fields.
- If denclNum is equal to 99, the location is unknown. Note that the content of the rackNum field is undefined in this case.
- If denclNum is greater than 99, the HSV110 controller does not have proof of the current location but the last known location is indicated by the content of the rackNum and denclNum fields. Subtract 100 from the content of those fields to determine the actual last known location. If there have been no configuration changes, the last known location values will be accurate.
Note that the content of the rackNum field will not be valid until a future release. The content of the alarmErrorCode field could not be translated into a known event. The enclosures array shows the drive enclosures available on the Fibre Channel loop pair (0 = Loop A, 1 = Loop B) identified in the loop field. The location of an available drive enclosure is determined by the content of the enclosures.denclNum field as follows: - If enclosures.denclNum is less than 99, the location is as indicated by the content of the enclosures.rackNum and enclosures.denclNum fields.
- If enclosures.denclNum is equal to 99, the enclosures array entry is not used. Note that the content of the enclosures.rackNum field is undefined in this case.
- If enclosures.denclNum is greater than 99, the HSV110 controller does not have proof of the current location but the last known location is indicated by the content of the enclosures.rackNum and enclosures.denclNum fields. Subtract 100 from the content of those fields to determine the actual last known location. If there have been no configuration changes, the last known location values will be accurate.
Note that the content of the enclosures.rackNum field will not be valid until a future release."
--#TYPE "StorageCell Event"
--#SUMMARY "SCellName-TimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."
--#ARGUMENTS {0,1,2,3,4,}
--#SEVERITY CRITICAL
--#TIMEINDEX 136
--#STATE WARNING
::= 13603328
sCellEventTrapD1 TRAP-TYPE -- CAC Code: 40
ENTERPRISE compaq
VARIABLES { scellNameDateTime,
scellSWComponent,
scellECode,
scellCAC,
scellEIP}
DESCRIPTION
"Severity: Critical -- failure or failure imminent. A physical disk drive that is not Fibre Channel compatible or cannot operate at the link rate established by the drive enclosure I/O modules was detected. The handle field contains the WWN of the drive enclosure containing the Drive Enclosure Environmental Monitoring Unit. This problem was detected by the Drive Enclosure Environmental Monitoring Unit located in the drive enclosure determined by the content of the denclNum field as follows: - If denclNum is less than 99, the location is as indicated by the content of the rackNum and denclNum fields.
- If denclNum is equal to 99, the location is unknown. Note that the content of the rackNum field is undefined in this case.
- If denclNum is greater than 99, the HSV110 controller does not have proof of the current location but the last known location is indicated by the content of the rackNum and denclNum fields. Subtract 100 from the content of those fields to determine the actual last known location. If there have been no configuration changes, the last known location values will be accurate.
Note that the content of the rackNum field will not be valid until a future release. This problem was detected during spin up of the physical disk drive installed in the drive enclosure bay identified in the alarmErrorCode.field.en field. The enclosures array shows the drive enclosures available on the Fibre Channel loop pair (0 = Loop A, 1 = Loop B) identified in the loop field. The location of an available drive enclosure is determined by the content of the enclosures.denclNum field as follows: - If enclosures.denclNum is less than 99, the location is as indicated by the content of the enclosures.rackNum and enclosures.denclNum fields.
- If enclosures.denclNum is equal to 99, the enclosures array entry is not used. Note that the content of the enclosures.rackNum field is undefined in this case.
- If enclosures.denclNum is greater than 99, the HSV110 controller does not have proof of the current location but the last known location is indicated by the content of the enclosures.rackNum and enclosures.denclNum fields. Subtract 100 from the content of those fields to determine the actual last known location. If there have been no configuration changes, the last known location values will be accurate.
Note that the content of the enclosures.rackNum field will not be valid until a future release."
--#TYPE "StorageCell Event"
--#SUMMARY "SCellName-TimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."
--#ARGUMENTS {0,1,2,3,4,}
--#SEVERITY CRITICAL
--#TIMEINDEX 136
--#STATE WARNING
::= 13603329
sCellEventTrapD2 TRAP-TYPE -- CAC Code: 41
ENTERPRISE compaq
VARIABLES { scellNameDateTime,
scellSWComponent,
scellECode,
scellCAC,
scellEIP}
DESCRIPTION
"Severity: Warning -- not failed but attention recommended or required. A physical disk drive is improperly installed or missing. This could affect the drive enclosure air flow and cause an over temperature condition. The handle field contains the WWN of the drive enclosure containing the Drive Enclosure Environmental Monitoring Unit. This problem was detected by the Drive Enclosure Environmental Monitoring Unit located in the drive enclosure determined by the content of the denclNum field as follows: - If denclNum is less than 99, the location is as indicated by the content of the rackNum and denclNum fields.
- If denclNum is equal to 99, the location is unknown. Note that the content of the rackNum field is undefined in this case.
- If denclNum is greater than 99, the HSV110 controller does not have proof of the current location but the last known location is indicated by the content of the rackNum and denclNum fields. Subtract 100 from the content of those fields to determine the actual last known location. If there have been no configuration changes, the last known location values will be accurate.
Note that the content of the rackNum field will not be valid until a future release. The affected drive enclosure bay is identified in the alarmErrorCode.field.en field. The enclosures array shows the drive enclosures available on the Fibre Channel loop pair (0 = Loop A, 1 = Loop B) identified in the loop field. The location of an available drive enclosure is determined by the content of the enclosures.denclNum field as follows: - If enclosures.denclNum is less than 99, the location is as indicated by the content of the enclosures.rackNum and enclosures.denclNum fields.
- If enclosures.denclNum is equal to 99, the enclosures array entry is not used. Note that the content of the enclosures.rackNum field is undefined in this case.
- If enclosures.denclNum is greater than 99, the HSV110 controller does not have proof of the current location but the last known location is indicated by the content of the enclosures.rackNum and enclosures.denclNum fields. Subtract 100 from the content of those fields to determine the actual last known location. If there have been no configuration changes, the last known location values will be accurate.
Note that the content of the enclosures.rackNum field will not be valid until a future release."
--#TYPE "StorageCell Event"
--#SUMMARY "SCellName-TimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."
--#ARGUMENTS {0,1,2,3,4,}
--#SEVERITY MINOR
--#TIMEINDEX 136
--#STATE WARNING
::= 13603330
sCellEventTrapD3 TRAP-TYPE -- CAC Code: 41
ENTERPRISE compaq
VARIABLES { scellNameDateTime,
scellSWComponent,
scellECode,
scellCAC,
scellEIP}
DESCRIPTION
"Severity: Warning -- not failed but attention recommended or required. A physical disk drive was removed while software-activated drive locking was enabled on a drive enclosure that does not support drive locking. The handle field contains the WWN of the drive enclosure containing the Drive Enclosure Environmental Monitoring Unit. This problem was detected by the Drive Enclosure Environmental Monitoring Unit located in the drive enclosure determined by the content of the denclNum field as follows: - If denclNum is less than 99, the location is as indicated by the content of the rackNum and denclNum fields.
- If denclNum is equal to 99, the location is unknown. Note that the content of the rackNum field is undefined in this case.
- If denclNum is greater than 99, the HSV110 controller does not have proof of the current location but the last known location is indicated by the content of the rackNum and denclNum fields. Subtract 100 from the content of those fields to determine the actual last known location. If there have been no configuration changes, the last known location values will be accurate.
Note that the content of the rackNum field will not be valid until a future release. The affected drive enclosure bay is identified in the alarmErrorCode.field.en field. The enclosures array shows the drive enclosures available on the Fibre Channel loop pair (0 = Loop A, 1 = Loop B) identified in the loop field. The location of an available drive enclosure is determined by the content of the enclosures.denclNum field as follows: - If enclosures.denclNum is less than 99, the location is as indicated by the content of the enclosures.rackNum and enclosures.denclNum fields.
- If enclosures.denclNum is equal to 99, the enclosures array entry is not used. Note that the content of the enclosures.rackNum field is undefined in this case.
- If enclosures.denclNum is greater than 99, the HSV110 controller does not have proof of the current location but the last known location is indicated by the content of the enclosures.rackNum and enclosures.denclNum fields. Subtract 100 from the content of those fields to determine the actual last known location. If there have been no configuration changes, the last known location values will be accurate.
Note that the content of the enclosures.rackNum field will not be valid until a future release."
--#TYPE "StorageCell Event"
--#SUMMARY "SCellName-TimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."
--#ARGUMENTS {0,1,2,3,4,}
--#SEVERITY MINOR
--#TIMEINDEX 136
--#STATE WARNING
::= 13603331
sCellEventTrapD4 TRAP-TYPE -- CAC Code: 42
ENTERPRISE compaq
VARIABLES { scellNameDateTime,
scellSWComponent,
scellECode,
scellCAC,
scellEIP}
DESCRIPTION
"Severity: Critical -- failure or failure imminent. A physical disk drive that is capable of operating at the loop link rate established by the drive enclosure I/O module was found to be running at a different rate. The handle field contains the WWN of the drive enclosure containing the Drive Enclosure Environmental Monitoring Unit. This problem was detected by the Drive Enclosure Environmental Monitoring Unit located in the drive enclosure determined by the content of the denclNum field as follows: - If denclNum is less than 99, the location is as indicated by the content of the rackNum and denclNum fields.
- If denclNum is equal to 99, the location is unknown. Note that the content of the rackNum field is undefined in this case.
- If denclNum is greater than 99, the HSV110 controller does not have proof of the current location but the last known location is indicated by the content of the rackNum and denclNum fields. Subtract 100 from the content of those fields to determine the actual last known location. If there have been no configuration changes, the last known location values will be accurate.
Note that the content of the rackNum field will not be valid until a future release. The affected physical disk drive is installed in the drive enclosure bay identified in the alarmErrorCode.field.en field. The Fibre Channel loop on which the problem was detected is identified by the content of the alarmErrorCode.field.ec field as follows: The enclosures array shows the drive enclosures available on the Fibre Channel loop pair (0 = Loop A, 1 = Loop B) identified in the loop field. The location of an available drive enclosure is determined by the content of the enclosures.denclNum field as follows:
- If enclosures.denclNum is less than 99, the location is as indicated by the content of the enclosures.rackNum and enclosures.denclNum fields.
- If enclosures.denclNum is equal to 99, the enclosures array entry is not used. Note that the content of the enclosures.rackNum field is undefined in this case.
- If enclosures.denclNum is greater than 99, the HSV110 controller does not have proof of the current location but the last known location is indicated by the content of the enclosures.rackNum and enclosures.denclNum fields. Subtract 100 from the content of those fields to determine the actual last known location. If there have been no configuration changes, the last known location values will be accurate.
Note that the content of the enclosures.rackNum field will not be valid until a future release."
--#TYPE "StorageCell Event"
--#SUMMARY "SCellName-TimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."
--#ARGUMENTS {0,1,2,3,4,}
--#SEVERITY CRITICAL
--#TIMEINDEX 136
--#STATE WARNING
::= 13603332
sCellEventTrapD33 TRAP-TYPE -- CAC Code: 9
ENTERPRISE compaq
VARIABLES { scellNameDateTime,
scellSWComponent,
scellECode,
scellCAC,
scellEIP}
DESCRIPTION
"Severity: Warning -- not failed but attention recommended or required. The AC input to a drive enclosure power supply has been lost. This makes the remaining power supply a single point of failure. The handle field contains the WWN of the drive enclosure containing the Drive Enclosure Environmental Monitoring Unit. This problem was detected by the Drive Enclosure Environmental Monitoring Unit located in the drive enclosure determined by the content of the denclNum field as follows: - If denclNum is less than 99, the location is as indicated by the content of the rackNum and denclNum fields.
- If denclNum is equal to 99, the location is unknown. Note that the content of the rackNum field is undefined in this case.
- If denclNum is greater than 99, the HSV110 controller does not have proof of the current location but the last known location is indicated by the content of the rackNum and denclNum fields. Subtract 100 from the content of those fields to determine the actual last known location. If there have been no configuration changes, the last known location values will be accurate.
Note that the content of the rackNum field will not be valid until a future release. The location of the affected power supply (1 or 2) is identified in the alarmErrorCode.field.en field. The enclosures array shows the drive enclosures available on the Fibre Channel loop pair (0 = Loop A, 1 = Loop B) identified in the loop field. The location of an available drive enclosure is determined by the content of the enclosures.denclNum field as follows: - If enclosures.denclNum is less than 99, the location is as indicated by the content of the enclosures.rackNum and enclosures.denclNum fields.
- If enclosures.denclNum is equal to 99, the enclosures array entry is not used. Note that the content of the enclosures.rackNum field is undefined in this case.
- If enclosures.denclNum is greater than 99, the HSV110 controller does not have proof of the current location but the last known location is indicated by the content of the enclosures.rackNum and enclosures.denclNum fields. Subtract 100 from the content of those fields to determine the actual last known location. If there have been no configuration changes, the last known location values will be accurate.
Note that the content of the enclosures.rackNum field will not be valid until a future release."
--#TYPE "StorageCell Event"
--#SUMMARY "SCellName-TimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."
--#ARGUMENTS {0,1,2,3,4,}
--#SEVERITY MINOR
--#TIMEINDEX 136
--#STATE WARNING
::= 13603379
sCellEventTrapD34 TRAP-TYPE -- CAC Code: 80
ENTERPRISE compaq
VARIABLES { scellNameDateTime,
scellSWComponent,
scellECode,
scellCAC,
scellEIP}
DESCRIPTION
"Severity: Critical -- failure or failure imminent. A drive enclosure power supply is improperly installed or missing. This could affect the drive enclosure air flow and cause an over temperature condition. The operational power supply will automatically shut down after a short period of time, thereby disabling the drive enclosure. This condition remains active until either the problem is corrected, or the operational power supply shuts down, whichever occurs first. The handle field contains the WWN of the drive enclosure containing the Drive Enclosure Environmental Monitoring Unit. This problem was detected by the Drive Enclosure Environmental Monitoring Unit located in the drive enclosure determined by the content of the denclNum field as follows: - If denclNum is less than 99, the location is as indicated by the content of the rackNum and denclNum fields.
- If denclNum is equal to 99, the location is unknown. Note that the content of the rackNum field is undefined in this case.
- If denclNum is greater than 99, the HSV110 controller does not have proof of the current location but the last known location is indicated by the content of the rackNum and denclNum fields. Subtract 100 from the content of those fields to determine the actual last known location. If there have been no configuration changes, the last known location values will be accurate.
Note that the content of the rackNum field will not be valid until a future release. The location of the affected power supply (1 or 2) is identified in the alarmErrorCode.field.en field. The enclosures array shows the drive enclosures available on the Fibre Channel loop pair (0 = Loop A, 1 = Loop B) identified in the loop field. The location of an available drive enclosure is determined by the content of the enclosures.denclNum field as follows: - If enclosures.denclNum is less than 99, the location is as indicated by the content of the enclosures.rackNum and enclosures.denclNum fields.
- If enclosures.denclNum is equal to 99, the enclosures array entry is not used. Note that the content of the enclosures.rackNum field is undefined in this case.
- If enclosures.denclNum is greater than 99, the HSV110 controller does not have proof of the current location but the last known location is indicated by the content of the enclosures.rackNum and enclosures.denclNum fields. Subtract 100 from the content of those fields to determine the actual last known location. If there have been no configuration changes, the last known location values will be accurate.
Note that the content of the enclosures.rackNum field will not be valid until a future release."
--#TYPE "StorageCell Event"
--#SUMMARY "SCellName-TimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."
--#ARGUMENTS {0,1,2,3,4,}
--#SEVERITY CRITICAL
--#TIMEINDEX 136
--#STATE WARNING
::= 13603380
sCellEventTrapD35 TRAP-TYPE -- CAC Code: 9a
ENTERPRISE compaq
VARIABLES { scellNameDateTime,
scellSWComponent,
scellECode,
scellCAC,
scellEIP}
DESCRIPTION
"Severity: Critical -- failure or failure imminent. A drive enclosure power supply component has failed. The handle field contains the WWN of the drive enclosure containing the Drive Enclosure Environmental Monitoring Unit. This problem was detected by the Drive Enclosure Environmental Monitoring Unit located in the drive enclosure determined by the content of the denclNum field as follows: - If denclNum is less than 99, the location is as indicated by the content of the rackNum and denclNum fields.
- If denclNum is equal to 99, the location is unknown. Note that the content of the rackNum field is undefined in this case.
- If denclNum is greater than 99, the HSV110 controller does not have proof of the current location but the last known location is indicated by the content of the rackNum and denclNum fields. Subtract 100 from the content of those fields to determine the actual last known location. If there have been no configuration changes, the last known location values will be accurate.
Note that the content of the rackNum field will not be valid until a future release. The location of the affected power supply (1 or 2) is identified in the alarmErrorCode.field.en field. The enclosures array shows the drive enclosures available on the Fibre Channel loop pair (0 = Loop A, 1 = Loop B) identified in the loop field. The location of an available drive enclosure is determined by the content of the enclosures.denclNum field as follows: - If enclosures.denclNum is less than 99, the location is as indicated by the content of the enclosures.rackNum and enclosures.denclNum fields.
- If enclosures.denclNum is equal to 99, the enclosures array entry is not used. Note that the content of the enclosures.rackNum field is undefined in this case.
- If enclosures.denclNum is greater than 99, the HSV110 controller does not have proof of the current location but the last known location is indicated by the content of the enclosures.rackNum and enclosures.denclNum fields. Subtract 100 from the content of those fields to determine the actual last known location. If there have been no configuration changes, the last known location values will be accurate.
Note that the content of the enclosures.rackNum field will not be valid until a future release."
--#TYPE "StorageCell Event"
--#SUMMARY "SCellName-TimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."
--#ARGUMENTS {0,1,2,3,4,}
--#SEVERITY CRITICAL
--#TIMEINDEX 136
--#STATE WARNING
::= 13603381
sCellEventTrapD47 TRAP-TYPE -- CAC Code: 83
ENTERPRISE compaq
VARIABLES { scellNameDateTime,
scellSWComponent,
scellECode,
scellCAC,
scellEIP}
DESCRIPTION
"Severity: Critical -- failure or failure imminent. A drive enclosure blower is not operating properly. This could affect the drive enclosure air flow and cause an over temperature condition. The handle field contains the WWN of the drive enclosure containing the Drive Enclosure Environmental Monitoring Unit. This problem was detected by the Drive Enclosure Environmental Monitoring Unit located in the drive enclosure determined by the content of the denclNum field as follows: - If denclNum is less than 99, the location is as indicated by the content of the rackNum and denclNum fields.
- If denclNum is equal to 99, the location is unknown. Note that the content of the rackNum field is undefined in this case.
- If denclNum is greater than 99, the HSV110 controller does not have proof of the current location but the last known location is indicated by the content of the rackNum and denclNum fields. Subtract 100 from the content of those fields to determine the actual last known location. If there have been no configuration changes, the last known location values will be accurate.
Note that the content of the rackNum field will not be valid until a future release. The location of the affected blower (1 or 2) is identified in the alarmErrorCode.field.en field. The cause of the improper operation is described by the content of the alarmErrorCode.field.ec field as follows: - 1 = The blower is operating at a speed that is outside of the Drive Enclosure Environmental Monitoring Unit specified range, possibly because of a bearing problem.
- 2 = The blower is operating at a speed that is significantly outside of the Drive Enclosure Environmental Monitoring Unit specified range, possibly because of a bearing problem.
- 3 = The blower has stopped. NOTE: The other blower (if operational) now operates at high speed and is a single point of failure. A single blower operating at high speed can provide sufficient air flow to cool an enclosure and the elements for up to 100 hours. However, operating an enclosure at temperatures approaching an overheating threshold can damage elements and may reduce the MTBF of a specific element. Hewlett-Packard therefore recommends immediate replacement of the defective blower.
- 4 = The power supply reported an internal blower error.
The enclosures array shows the drive enclosures available on the Fibre Channel loop pair (0 = Loop A, 1 = Loop B) identified in the loop field. The location of an available drive enclosure is determined by the content of the enclosures.denclNum field as follows:
- If enclosures.denclNum is less than 99, the location is as indicated by the content of the enclosures.rackNum and enclosures.denclNum fields.
- If enclosures.denclNum is equal to 99, the enclosures array entry is not used. Note that the content of the enclosures.rackNum field is undefined in this case.
- If enclosures.denclNum is greater than 99, the HSV110 controller does not have proof of the current location but the last known location is indicated by the content of the enclosures.rackNum and enclosures.denclNum fields. Subtract 100 from the content of those fields to determine the actual last known location. If there have been no configuration changes, the last known location values will be accurate.
Note that the content of the enclosures.rackNum field will not be valid until a future release."
--#TYPE "StorageCell Event"
--#SUMMARY "SCellName-TimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."
--#ARGUMENTS {0,1,2,3,4,}
--#SEVERITY CRITICAL
--#TIMEINDEX 136
--#STATE WARNING
::= 13603399
sCellEventTrapD4b TRAP-TYPE -- CAC Code: 82
ENTERPRISE compaq
VARIABLES { scellNameDateTime,
scellSWComponent,
scellECode,
scellCAC,
scellEIP}
DESCRIPTION
"Severity: Critical -- failure or failure imminent. A drive enclosure blower is improperly installed or missing. This affects the drive enclosure air flow and can cause an over temperature condition. The handle field contains the WWN of the drive enclosure containing the Drive Enclosure Environmental Monitoring Unit. This problem was detected by the Drive Enclosure Environmental Monitoring Unit located in the drive enclosure determined by the content of the denclNum field as follows: - If denclNum is less than 99, the location is as indicated by the content of the rackNum and denclNum fields.
- If denclNum is equal to 99, the location is unknown. Note that the content of the rackNum field is undefined in this case.
- If denclNum is greater than 99, the HSV110 controller does not have proof of the current location but the last known location is indicated by the content of the rackNum and denclNum fields. Subtract 100 from the content of those fields to determine the actual last known location. If there have been no configuration changes, the last known location values will be accurate.
Note that the content of the rackNum field will not be valid until a future release. The location of the affected blower (1 or 2) is identified in the alarmErrorCode.field.en field. The enclosures array shows the drive enclosures available on the Fibre Channel loop pair (0 = Loop A, 1 = Loop B) identified in the loop field. The location of an available drive enclosure is determined by the content of the enclosures.denclNum field as follows: - If enclosures.denclNum is less than 99, the location is as indicated by the content of the enclosures.rackNum and enclosures.denclNum fields.
- If enclosures.denclNum is equal to 99, the enclosures array entry is not used. Note that the content of the enclosures.rackNum field is undefined in this case.
- If enclosures.denclNum is greater than 99, the HSV110 controller does not have proof of the current location but the last known location is indicated by the content of the enclosures.rackNum and enclosures.denclNum fields. Subtract 100 from the content of those fields to determine the actual last known location. If there have been no configuration changes, the last known location values will be accurate.
Note that the content of the enclosures.rackNum field will not be valid until a future release."
--#TYPE "StorageCell Event"
--#SUMMARY "SCellName-TimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."
--#ARGUMENTS {0,1,2,3,4,}
--#SEVERITY CRITICAL
--#TIMEINDEX 136
--#STATE WARNING
::= 13603403
sCellEventTrapD4c TRAP-TYPE -- CAC Code: 84
ENTERPRISE compaq
VARIABLES { scellNameDateTime,
scellSWComponent,
scellECode,
scellCAC,
scellEIP}
DESCRIPTION
"Severity: Critical -- failure or failure imminent. Both drive enclosure blowers are missing. This severely affects the drive enclosure air flow and can cause an over temperature condition. The operational power supply(s) will automatically shut down after a short period of time, thereby disabling the drive enclosure. This condition remains active until either the problem is corrected, or the operational power supply(s) shut down, whichever occurs first. The handle field contains the WWN of the drive enclosure containing the Drive Enclosure Environmental Monitoring Unit. This problem was detected by the Drive Enclosure Environmental Monitoring Unit located in the drive enclosure determined by the content of the denclNum field as follows: - If denclNum is less than 99, the location is as indicated by the content of the rackNum and denclNum fields.
- If denclNum is equal to 99, the location is unknown. Note that the content of the rackNum field is undefined in this case.
- If denclNum is greater than 99, the HSV110 controller does not have proof of the current location but the last known location is indicated by the content of the rackNum and denclNum fields. Subtract 100 from the content of those fields to determine the actual last known location. If there have been no configuration changes, the last known location values will be accurate.
Note that the content of the rackNum field will not be valid until a future release. Note that this event is preceded by a 'drive enclosure blower is improperly installed or missing' event that identifies the location of the first missing blower. The location of the second missing blower (1 or 2) is identified in the alarmErrorCode.field.en field of this event. The enclosures array shows the drive enclosures available on the Fibre Channel loop pair (0 = Loop A, 1 = Loop B) identified in the loop field. The location of an available drive enclosure is determined by the content of the enclosures.denclNum field as follows: - If enclosures.denclNum is less than 99, the location is as indicated by the content of the enclosures.rackNum and enclosures.denclNum fields.
- If enclosures.denclNum is equal to 99, the enclosures array entry is not used. Note that the content of the enclosures.rackNum field is undefined in this case.
- If enclosures.denclNum is greater than 99, the HSV110 controller does not have proof of the current location but the last known location is indicated by the content of the enclosures.rackNum and enclosures.denclNum fields. Subtract 100 from the content of those fields to determine the actual last known location. If there have been no configuration changes, the last known location values will be accurate.
Note that the content of the enclosures.rackNum field will not be valid until a future release."
--#TYPE "StorageCell Event"
--#SUMMARY "SCellName-TimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."
--#ARGUMENTS {0,1,2,3,4,}
--#SEVERITY CRITICAL
--#TIMEINDEX 136
--#STATE WARNING
::= 13603404
sCellEventTrapD5b TRAP-TYPE -- CAC Code: 86
ENTERPRISE compaq
VARIABLES { scellNameDateTime,
scellSWComponent,
scellECode,
scellCAC,
scellEIP}
DESCRIPTION
"Severity: Warning -- not failed but attention recommended or required. A drive enclosure temperature sensor out of range condition has been reported by one of the drive enclosure elements. The handle field contains the WWN of the drive enclosure containing the Drive Enclosure Environmental Monitoring Unit. This problem was detected by the Drive Enclosure Environmental Monitoring Unit located in the drive enclosure determined by the content of the denclNum field as follows: - If denclNum is less than 99, the location is as indicated by the content of the rackNum and denclNum fields.
- If denclNum is equal to 99, the location is unknown. Note that the content of the rackNum field is undefined in this case.
- If denclNum is greater than 99, the HSV110 controller does not have proof of the current location but the last known location is indicated by the content of the rackNum and denclNum fields. Subtract 100 from the content of those fields to determine the actual last known location. If there have been no configuration changes, the last known location values will be accurate.
Note that the content of the rackNum field will not be valid until a future release. The location of the temperature sensor (1 through 11) is identified in the alarmErrorCode.field.en field as follows: - 1 = Power Supply 1 Exhaust
- 2 = Power Supply 2 Exhaust
- 3 = Drive Enclosure Environmental Monitoring Unit
- 4 = Drive Bay 1
- 5 = Drive Bay 2
- 6 = Drive Bay 3
- 7 = Drive Bay 4
- 8 = Drive Bay 5
- 9 = Drive Bay 6
- A = Drive Bay 7
- B = Drive Bay 8
- C = Drive Bay 9
- D = Drive Bay 10
- E = Drive Bay 11
- F = Drive Bay 12
- 10 = Drive Bay 13
- 11 = Drive Bay 14
The temperature sensor out of range condition is described by the content of the alarmErrorCode.field.ec field as follows:
- 1 = The element temperature is approaching, but has not reached, the high temperature CRITICAL threshold. Continued operation under these conditions may result in a CRITICAL condition and may reduce an element's MTBF.
- 2 = The element temperature is above the high temperature CRITICAL threshold. Continued operation under these conditions may result in element failure.
- 3 = The element temperature is approaching, but has not reached, the low temperature CRITICAL threshold. Continued operation under these conditions may result in a CRITICAL condition and may reduce an element's MTBF.
- 4 = The element temperature has reached the low temperature CRITICAL threshold. Continued operation under these conditions may result in element failure.
The actual temperature threshold values can be found in the HSV element manager GUI. The enclosures array shows the drive enclosures available on the Fibre Channel loop pair (0 = Loop A, 1 = Loop B) identified in the loop field. The location of an available drive enclosure is determined by the content of the enclosures.denclNum field as follows:
- If enclosures.denclNum is less than 99, the location is as indicated by the content of the enclosures.rackNum and enclosures.denclNum fields.
- If enclosures.denclNum is equal to 99, the enclosures array entry is not used. Note that the content of the enclosures.rackNum field is undefined in this case.
- If enclosures.denclNum is greater than 99, the HSV110 controller does not have proof of the current location but the last known location is indicated by the content of the enclosures.rackNum and enclosures.denclNum fields. Subtract 100 from the content of those fields to determine the actual last known location. If there have been no configuration changes, the last known location values will be accurate.
Note that the content of the enclosures.rackNum field will not be valid until a future release."
--#TYPE "StorageCell Event"
--#SUMMARY "SCellName-TimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."
--#ARGUMENTS {0,1,2,3,4,}
--#SEVERITY MINOR
--#TIMEINDEX 136
--#STATE WARNING
::= 13603419
sCellEventTrapD5f TRAP-TYPE -- CAC Code: 87
ENTERPRISE compaq
VARIABLES { scellNameDateTime,
scellSWComponent,
scellECode,
scellCAC,
scellEIP}
DESCRIPTION
"Severity: Critical -- failure or failure imminent. The average temperature of two of the three temperature sensor groups (i.e., Drive Enclosure Environmental Monitoring Unit, Disk Drives, and Power Supplies) exceeds the CRITICAL level. The operational power supply(s) will automatically shut down after a short period of time, thereby disabling the drive enclosure. This condition remains active until either the problem is corrected, or the operational power supply(s) shut down, whichever occurs first. The handle field contains the WWN of the drive enclosure containing the Drive Enclosure Environmental Monitoring Unit. This problem was detected by the Drive Enclosure Environmental Monitoring Unit located in the drive enclosure determined by the content of the denclNum field as follows: - If denclNum is less than 99, the location is as indicated by the content of the rackNum and denclNum fields.
- If denclNum is equal to 99, the location is unknown. Note that the content of the rackNum field is undefined in this case.
- If denclNum is greater than 99, the HSV110 controller does not have proof of the current location but the last known location is indicated by the content of the rackNum and denclNum fields. Subtract 100 from the content of those fields to determine the actual last known location. If there have been no configuration changes, the last known location values will be accurate.
Note that the content of the rackNum field will not be valid until a future release. Note that in this case the content of the alarmErrorCode.field.en field is undefined. The actual temperature threshold values can be found in the HSV element manager GUI. The enclosures array shows the drive enclosures available on the Fibre Channel loop pair (0 = Loop A, 1 = Loop B) identified in the loop field. The location of an available drive enclosure is determined by the content of the enclosures.denclNum field as follows:
- If enclosures.denclNum is less than 99, the location is as indicated by the content of the enclosures.rackNum and enclosures.denclNum fields.
- If enclosures.denclNum is equal to 99, the enclosures array entry is not used. Note that the content of the enclosures.rackNum field is undefined in this case.
- If enclosures.denclNum is greater than 99, the HSV110 controller does not have proof of the current location but the last known location is indicated by the content of the enclosures.rackNum and enclosures.denclNum fields. Subtract 100 from the content of those fields to determine the actual last known location. If there have been no configuration changes, the last known location values will be accurate.
Note that the content of the enclosures.rackNum field will not be valid until a future release."
--#TYPE "StorageCell Event"
--#SUMMARY "SCellName-TimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."
--#ARGUMENTS {0,1,2,3,4,}
--#SEVERITY CRITICAL
--#TIMEINDEX 136
--#STATE WARNING
::= 13603423
sCellEventTrapD6f TRAP-TYPE -- CAC Code: 88
ENTERPRISE compaq
VARIABLES { scellNameDateTime,
scellSWComponent,
scellECode,
scellCAC,
scellEIP}
DESCRIPTION
"Severity: Warning -- not failed but attention recommended or required. An internal Drive Enclosure Environmental Monitoring Unit error has occurred. The handle field contains the WWN of the drive enclosure containing the Drive Enclosure Environmental Monitoring Unit. This problem was detected by the Drive Enclosure Environmental Monitoring Unit located in the drive enclosure determined by the content of the denclNum field as follows: - If denclNum is less than 99, the location is as indicated by the content of the rackNum and denclNum fields.
- If denclNum is equal to 99, the location is unknown. Note that the content of the rackNum field is undefined in this case.
- If denclNum is greater than 99, the HSV110 controller does not have proof of the current location but the last known location is indicated by the content of the rackNum and denclNum fields. Subtract 100 from the content of those fields to determine the actual last known location. If there have been no configuration changes, the last known location values will be accurate.
Note that the content of the rackNum field will not be valid until a future release. The alarmErrorCode.field.en field contains the value 1 signifying that the Drive Enclosure Environmental Monitoring Unit is the affected element. The cause of the improper operation is described by the content of the alarmErrorCode.field.ec field as follows: - 1 = An internal Drive Enclosure Environmental Monitoring Unit clock error has occurred.
- 2 = The Inter-IC (I2C) bus is not processing data and the Drive Enclosure Environmental Monitoring Unit is unable to monitor or report the status of the elements or enclosures.
- 5 = A Backplane NVRAM error has occurred.
The enclosures array shows the drive enclosures available on the Fibre Channel loop pair (0 = Loop A, 1 = Loop B) identified in the loop field. The location of an available drive enclosure is determined by the content of the enclosures.denclNum field as follows:
- If enclosures.denclNum is less than 99, the location is as indicated by the content of the enclosures.rackNum and enclosures.denclNum fields.
- If enclosures.denclNum is equal to 99, the enclosures array entry is not used. Note that the content of the enclosures.rackNum field is undefined in this case.
- If enclosures.denclNum is greater than 99, the HSV110 controller does not have proof of the current location but the last known location is indicated by the content of the enclosures.rackNum and enclosures.denclNum fields. Subtract 100 from the content of those fields to determine the actual last known location. If there have been no configuration changes, the last known location values will be accurate.
Note that the content of the enclosures.rackNum field will not be valid until a future release."
--#TYPE "StorageCell Event"
--#SUMMARY "SCellName-TimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."
--#ARGUMENTS {0,1,2,3,4,}
--#SEVERITY MINOR
--#TIMEINDEX 136
--#STATE WARNING
::= 13603439
sCellEventTrapD71 TRAP-TYPE -- CAC Code: 0
ENTERPRISE compaq
VARIABLES { scellNameDateTime,
scellSWComponent,
scellECode,
scellCAC,
scellEIP}
DESCRIPTION
"Severity: Normal -- informational in nature. An internal Drive Enclosure Environmental Monitoring Unit error has occurred. The handle field contains the WWN of the drive enclosure containing the Drive Enclosure Environmental Monitoring Unit. This problem was detected by the Drive Enclosure Environmental Monitoring Unit located in the drive enclosure determined by the content of the denclNum field as follows: - If denclNum is less than 99, the location is as indicated by the content of the rackNum and denclNum fields.
- If denclNum is equal to 99, the location is unknown. Note that the content of the rackNum field is undefined in this case.
- If denclNum is greater than 99, the HSV110 controller does not have proof of the current location but the last known location is indicated by the content of the rackNum and denclNum fields. Subtract 100 from the content of those fields to determine the actual last known location. If there have been no configuration changes, the last known location values will be accurate.
Note that the content of the rackNum field will not be valid until a future release. The alarmErrorCode.field.en field contains the value 1 signifying that the Drive Enclosure Environmental Monitoring Unit is the affected element. The cause of the improper operation is described by the content of the alarmErrorCode.field.ec field as follows: - 3 = A drive enclosure power supply was shut down.
- 16 = The Drive Enclosure Environmental Monitoring Unit ESI data has been corrupted.
The enclosures array shows the drive enclosures available on the Fibre Channel loop pair (0 = Loop A, 1 = Loop B) identified in the loop field. The location of an available drive enclosure is determined by the content of the enclosures.denclNum field as follows:
- If enclosures.denclNum is less than 99, the location is as indicated by the content of the enclosures.rackNum and enclosures.denclNum fields.
- If enclosures.denclNum is equal to 99, the enclosures array entry is not used. Note that the content of the enclosures.rackNum field is undefined in this case.
- If enclosures.denclNum is greater than 99, the HSV110 controller does not have proof of the current location but the last known location is indicated by the content of the enclosures.rackNum and enclosures.denclNum fields. Subtract 100 from the content of those fields to determine the actual last known location. If there have been no configuration changes, the last known location values will be accurate.
Note that the content of the enclosures.rackNum field will not be valid until a future release."
--#TYPE "StorageCell Event"
--#SUMMARY "SCellName-TimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."
--#ARGUMENTS {0,1,2,3,4,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
--#STATE WARNING
::= 13603441
sCellEventTrapD72 TRAP-TYPE -- CAC Code: 8a
ENTERPRISE compaq
VARIABLES { scellNameDateTime,
scellSWComponent,
scellECode,
scellCAC,
scellEIP}
DESCRIPTION
"Severity: Warning -- not failed but attention recommended or required. A Drive Enclosure Environmental Monitoring Unit is unable to collect data for the SCSI-3 Enclosure Services (SES) page. The handle field contains the WWN of the drive enclosure containing the Drive Enclosure Environmental Monitoring Unit. This problem was detected by the Drive Enclosure Environmental Monitoring Unit located in the drive enclosure determined by the content of the denclNum field as follows: - If denclNum is less than 99, the location is as indicated by the content of the rackNum and denclNum fields.
- If denclNum is equal to 99, the location is unknown. Note that the content of the rackNum field is undefined in this case.
- If denclNum is greater than 99, the HSV110 controller does not have proof of the current location but the last known location is indicated by the content of the rackNum and denclNum fields. Subtract 100 from the content of those fields to determine the actual last known location. If there have been no configuration changes, the last known location values will be accurate.
Note that the content of the rackNum field will not be valid until a future release. The alarmErrorCode.field.en field contains the value 1 signifying that the Drive Enclosure Environmental Monitoring Unit is the affected element. The enclosures array shows the drive enclosures available on the Fibre Channel loop pair (0 = Loop A, 1 = Loop B) identified in the loop field. The location of an available drive enclosure is determined by the content of the enclosures.denclNum field as follows: - If enclosures.denclNum is less than 99, the location is as indicated by the content of the enclosures.rackNum and enclosures.denclNum fields.
- If enclosures.denclNum is equal to 99, the enclosures array entry is not used. Note that the content of the enclosures.rackNum field is undefined in this case.
- If enclosures.denclNum is greater than 99, the HSV110 controller does not have proof of the current location but the last known location is indicated by the content of the enclosures.rackNum and enclosures.denclNum fields. Subtract 100 from the content of those fields to determine the actual last known location. If there have been no configuration changes, the last known location values will be accurate.
Note that the content of the enclosures.rackNum field will not be valid until a future release."
--#TYPE "StorageCell Event"
--#SUMMARY "SCellName-TimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."
--#ARGUMENTS {0,1,2,3,4,}
--#SEVERITY MINOR
--#TIMEINDEX 136
--#STATE WARNING
::= 13603442
sCellEventTrapD7e TRAP-TYPE -- CAC Code: 8c
ENTERPRISE compaq
VARIABLES { scellNameDateTime,
scellSWComponent,
scellECode,
scellCAC,
scellEIP}
DESCRIPTION
"Severity: Warning -- not failed but attention recommended or required. Invalid data was read from a Drive Enclosure Environmental Monitoring Unit NVRAM. The handle field contains the WWN of the drive enclosure containing the Drive Enclosure Environmental Monitoring Unit. This problem was detected by the Drive Enclosure Environmental Monitoring Unit located in the drive enclosure determined by the content of the denclNum field as follows: - If denclNum is less than 99, the location is as indicated by the content of the rackNum and denclNum fields.
- If denclNum is equal to 99, the location is unknown. Note that the content of the rackNum field is undefined in this case.
- If denclNum is greater than 99, the HSV110 controller does not have proof of the current location but the last known location is indicated by the content of the rackNum and denclNum fields. Subtract 100 from the content of those fields to determine the actual last known location. If there have been no configuration changes, the last known location values will be accurate.
Note that the content of the rackNum field will not be valid until a future release. The alarmErrorCode.field.en field contains the value 1 signifying that the Drive Enclosure Environmental Monitoring Unit is the affected element. The enclosures array shows the drive enclosures available on the Fibre Channel loop pair (0 = Loop A, 1 = Loop B) identified in the loop field. The location of an available drive enclosure is determined by the content of the enclosures.denclNum field as follows: - If enclosures.denclNum is less than 99, the location is as indicated by the content of the enclosures.rackNum and enclosures.denclNum fields.
- If enclosures.denclNum is equal to 99, the enclosures array entry is not used. Note that the content of the enclosures.rackNum field is undefined in this case.
- If enclosures.denclNum is greater than 99, the HSV110 controller does not have proof of the current location but the last known location is indicated by the content of the enclosures.rackNum and enclosures.denclNum fields. Subtract 100 from the content of those fields to determine the actual last known location. If there have been no configuration changes, the last known location values will be accurate.
Note that the content of the enclosures.rackNum field will not be valid until a future release."
--#TYPE "StorageCell Event"
--#SUMMARY "SCellName-TimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."
--#ARGUMENTS {0,1,2,3,4,}
--#SEVERITY MINOR
--#TIMEINDEX 136
--#STATE WARNING
::= 13603454
sCellEventTrapD7f TRAP-TYPE -- CAC Code: 8b
ENTERPRISE compaq
VARIABLES { scellNameDateTime,
scellSWComponent,
scellECode,
scellCAC,
scellEIP}
DESCRIPTION
"Severity: Warning -- not failed but attention recommended or required. An internal Drive Enclosure Environmental Monitoring Unit error has occurred. The handle field contains the WWN of the drive enclosure containing the Drive Enclosure Environmental Monitoring Unit. This problem was detected by the Drive Enclosure Environmental Monitoring Unit located in the drive enclosure determined by the content of the denclNum field as follows: - If denclNum is less than 99, the location is as indicated by the content of the rackNum and denclNum fields.
- If denclNum is equal to 99, the location is unknown. Note that the content of the rackNum field is undefined in this case.
- If denclNum is greater than 99, the HSV110 controller does not have proof of the current location but the last known location is indicated by the content of the rackNum and denclNum fields. Subtract 100 from the content of those fields to determine the actual last known location. If there have been no configuration changes, the last known location values will be accurate.
Note that the content of the rackNum field will not be valid until a future release. The alarmErrorCode.field.en field contains the value 1 signifying that the Drive Enclosure Environmental Monitoring Unit is the affected element. The cause of the improper operation is described by the content of the alarmErrorCode.field.ec field as follows: - 11 = The Drive Enclosure Environmental Monitoring Unit cannot write data to the NVRAM.
- 12 = The Drive Enclosure Environmental Monitoring Unit cannot read data from the NVRAM.
- 13 = The Field Programmable Gate Array (FPGA) that controls the ESI bus failed to load information required for Drive Enclosure Environmental Monitoring Unit operation.
The enclosures array shows the drive enclosures available on the Fibre Channel loop pair (0 = Loop A, 1 = Loop B) identified in the loop field. The location of an available drive enclosure is determined by the content of the enclosures.denclNum field as follows:
- If enclosures.denclNum is less than 99, the location is as indicated by the content of the enclosures.rackNum and enclosures.denclNum fields.
- If enclosures.denclNum is equal to 99, the enclosures array entry is not used. Note that the content of the enclosures.rackNum field is undefined in this case.
- If enclosures.denclNum is greater than 99, the HSV110 controller does not have proof of the current location but the last known location is indicated by the content of the enclosures.rackNum and enclosures.denclNum fields. Subtract 100 from the content of those fields to determine the actual last known location. If there have been no configuration changes, the last known location values will be accurate.
Note that the content of the enclosures.rackNum field will not be valid until a future release."
--#TYPE "StorageCell Event"
--#SUMMARY "SCellName-TimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."
--#ARGUMENTS {0,1,2,3,4,}
--#SEVERITY MINOR
--#TIMEINDEX 136
--#STATE WARNING
::= 13603455
sCellEventTrapD82 TRAP-TYPE -- CAC Code: 8e
ENTERPRISE compaq
VARIABLES { scellNameDateTime,
scellSWComponent,
scellECode,
scellCAC,
scellEIP}
DESCRIPTION
"Severity: Warning -- not failed but attention recommended or required. A drive enclosure's address is incorrect or the enclosure has no address. The handle field contains the WWN of the drive enclosure containing the Drive Enclosure Environmental Monitoring Unit. This problem was detected by the Drive Enclosure Environmental Monitoring Unit located in the drive enclosure determined by the content of the denclNum field as follows: - If denclNum is less than 99, the location is as indicated by the content of the rackNum and denclNum fields.
- If denclNum is equal to 99, the location is unknown. Note that the content of the rackNum field is undefined in this case.
- If denclNum is greater than 99, the HSV110 controller does not have proof of the current location but the last known location is indicated by the content of the rackNum and denclNum fields. Subtract 100 from the content of those fields to determine the actual last known location. If there have been no configuration changes, the last known location values will be accurate.
Note that the content of the rackNum field will not be valid until a future release. The alarmErrorCode.field.en field contains the value 1 signifying that the Drive Enclosure Environmental Monitoring Unit is the affected element. The enclosures array shows the drive enclosures available on the Fibre Channel loop pair (0 = Loop A, 1 = Loop B) identified in the loop field. The location of an available drive enclosure is determined by the content of the enclosures.denclNum field as follows: - If enclosures.denclNum is less than 99, the location is as indicated by the content of the enclosures.rackNum and enclosures.denclNum fields.
- If enclosures.denclNum is equal to 99, the enclosures array entry is not used. Note that the content of the enclosures.rackNum field is undefined in this case.
- If enclosures.denclNum is greater than 99, the HSV110 controller does not have proof of the current location but the last known location is indicated by the content of the enclosures.rackNum and enclosures.denclNum fields. Subtract 100 from the content of those fields to determine the actual last known location. If there have been no configuration changes, the last known location values will be accurate.
Note that the content of the enclosures.rackNum field will not be valid until a future release."
--#TYPE "StorageCell Event"
--#SUMMARY "SCellName-TimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."
--#ARGUMENTS {0,1,2,3,4,}
--#SEVERITY MINOR
--#TIMEINDEX 136
--#STATE WARNING
::= 13603458
sCellEventTrapD83 TRAP-TYPE -- CAC Code: 89
ENTERPRISE compaq
VARIABLES { scellNameDateTime,
scellSWComponent,
scellECode,
scellCAC,
scellEIP}
DESCRIPTION
"Severity: Critical -- failure or failure imminent. A Drive Enclosure Environmental Monitoring Unit has experienced a hardware failure. The handle field contains the WWN of the drive enclosure containing the Drive Enclosure Environmental Monitoring Unit. This problem was detected by the Drive Enclosure Environmental Monitoring Unit located in the drive enclosure determined by the content of the denclNum field as follows: - If denclNum is less than 99, the location is as indicated by the content of the rackNum and denclNum fields.
- If denclNum is equal to 99, the location is unknown. Note that the content of the rackNum field is undefined in this case.
- If denclNum is greater than 99, the HSV110 controller does not have proof of the current location but the last known location is indicated by the content of the rackNum and denclNum fields. Subtract 100 from the content of those fields to determine the actual last known location. If there have been no configuration changes, the last known location values will be accurate.
Note that the content of the rackNum field will not be valid until a future release. The alarmErrorCode.field.en field contains the value 1 signifying that the Drive Enclosure Environmental Monitoring Unit is the affected element. The enclosures array shows the drive enclosures available on the Fibre Channel loop pair (0 = Loop A, 1 = Loop B) identified in the loop field. The The location of an available drive enclosure is determined by the content of the enclosures.denclNum field as follows: - If enclosures.denclNum is less than 99, the location is as indicated by the content of the enclosures.rackNum and enclosures.denclNum fields.
- If enclosures.denclNum is equal to 99, the enclosures array entry is not used. Note that the content of the enclosures.rackNum field is undefined in this case.
- If enclosures.denclNum is greater than 99, the HSV110 controller does not have proof of the current location but the last known location is indicated by the content of the enclosures.rackNum and enclosures.denclNum fields. Subtract 100 from the content of those fields to determine the actual last known location. If there have been no configuration changes, the last known location values will be accurate.
Note that the content of the enclosures.rackNum field will not be valid until a future release. The cause of the improper operation is described by the content of the alarmErrorCode.field.ec field as follows: - 15 = Drive Enclosure Environmental Monitoring Unit hardware failure DP.
- 18 = Drive Enclosure Environmental Monitoring Unit hardware failed BT.
- 19 = Drive Enclosure Environmental Monitoring Unit ESI driver failure.
"
--#TYPE "StorageCell Event"
--#SUMMARY "SCellName-TimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."
--#ARGUMENTS {0,1,2,3,4,}
--#SEVERITY CRITICAL
--#TIMEINDEX 136
--#STATE WARNING
::= 13603459
sCellEventTrapD85 TRAP-TYPE -- CAC Code: 8f
ENTERPRISE compaq
VARIABLES { scellNameDateTime,
scellSWComponent,
scellECode,
scellCAC,
scellEIP}
DESCRIPTION
"Severity: Warning -- not failed but attention recommended or required. A drive enclosure power supply failed to respond to a shut down command. The handle field contains the WWN of the drive enclosure containing the Drive Enclosure Environmental Monitoring Unit. This problem was detected by the Drive Enclosure Environmental Monitoring Unit located in the drive enclosure determined by the content of the denclNum field as follows: - If denclNum is less than 99, the location is as indicated by the content of the rackNum and denclNum fields.
- If denclNum is equal to 99, the location is unknown. Note that the content of the rackNum field is undefined in this case.
- If denclNum is greater than 99, the HSV110 controller does not have proof of the current location but the last known location is indicated by the content of the rackNum and denclNum fields. Subtract 100 from the content of those fields to determine the actual last known location. If there have been no configuration changes, the last known location values will be accurate.
Note that the content of the rackNum field will not be valid until a future release. The alarmErrorCode.field.en field contains the value 1 signifying that the Drive Enclosure Environmental Monitoring Unit is the affected element. The enclosures array shows the drive enclosures available on the Fibre Channel loop pair (0 = Loop A, 1 = Loop B) identified in the loop field. The location of an available drive enclosure is determined by the content of the enclosures.denclNum field as follows: - If enclosures.denclNum is less than 99, the location is as indicated by the content of the enclosures.rackNum and enclosures.denclNum fields.
- If enclosures.denclNum is equal to 99, the enclosures array entry is not used. Note that the content of the enclosures.rackNum field is undefined in this case.
- If enclosures.denclNum is greater than 99, the HSV110 controller does not have proof of the current location but the last known location is indicated by the content of the enclosures.rackNum and enclosures.denclNum fields. Subtract 100 from the content of those fields to determine the actual last known location. If there have been no configuration changes, the last known location values will be accurate.
Note that the content of the enclosures.rackNum field will not be valid until a future release."
--#TYPE "StorageCell Event"
--#SUMMARY "SCellName-TimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."
--#ARGUMENTS {0,1,2,3,4,}
--#SEVERITY MINOR
--#TIMEINDEX 136
--#STATE WARNING
::= 13603461
sCellEventTrapD8d TRAP-TYPE -- CAC Code: 90
ENTERPRISE compaq
VARIABLES { scellNameDateTime,
scellSWComponent,
scellECode,
scellCAC,
scellEIP}
DESCRIPTION
"Severity: Critical -- failure or failure imminent. A drive enclosure transceiver error has been detected. The handle field contains the WWN of the drive enclosure containing the Drive Enclosure Environmental Monitoring Unit. This problem was detected by the Drive Enclosure Environmental Monitoring Unit located in the drive enclosure determined by the content of the denclNum field as follows: - If denclNum is less than 99, the location is as indicated by the content of the rackNum and denclNum fields.
- If denclNum is equal to 99, the location is unknown. Note that the content of the rackNum field is undefined in this case.
- If denclNum is greater than 99, the HSV110 controller does not have proof of the current location but the last known location is indicated by the content of the rackNum and denclNum fields. Subtract 100 from the content of those fields to determine the actual last known location. If there have been no configuration changes, the last known location values will be accurate.
Note that the content of the rackNum field will not be valid until a future release. The location of the transceiver (1 through 4) is identified in the alarmErrorCode.field.en field as follows: - 1 = Transceiver 01
- 2 = Transceiver 02
- 3 = Transceiver 03
- 4 = Transceiver 04
The transceiver error condition is described by the content of the alarmErrorCode.field.ec field as follows:
- 1 = The transceivers on this link are not the same type or they are incompatible with the drive enclosure I/O module. This error prevents the controller from establishing a link with the enclosure drives and eliminates the enclosure dual-loop capability.
- 2 = The transceiver can no longer detect a data signal. This error prevents the controller from transferring data on a loop and eliminates the enclosure dual-loop capability.
- 3 = The system has detected an FC-AL bus fault involving a transceiver. This error prevents the controller from transferring data on a loop and eliminates the enclosure dual-loop capability.
- 4 = The transceiver that was previously in this location has been removed.
- 5 = The transceiver in the specified location has detected invalid Fibre Channel characters.
The enclosures array shows the drive enclosures available on the Fibre Channel loop pair (0 = Loop A, 1 = Loop B) identified in the loop field. The location of an available drive enclosure is determined by the content of the enclosures.denclNum field as follows:
- If enclosures.denclNum is less than 99, the location is as indicated by the content of the enclosures.rackNum and enclosures.denclNum fields.
- If enclosures.denclNum is equal to 99, the enclosures array entry is not used. Note that the content of the enclosures.rackNum field is undefined in this case.
- If enclosures.denclNum is greater than 99, the HSV110 controller does not have proof of the current location but the last known location is indicated by the content of the enclosures.rackNum and enclosures.denclNum fields. Subtract 100 from the content of those fields to determine the actual last known location. If there have been no configuration changes, the last known location values will be accurate.
Note that the content of the enclosures.rackNum field will not be valid until a future release."
--#TYPE "StorageCell Event"
--#SUMMARY "SCellName-TimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."
--#ARGUMENTS {0,1,2,3,4,}
--#SEVERITY CRITICAL
--#TIMEINDEX 136
--#STATE WARNING
::= 13603469
sCellEventTrapDA1 TRAP-TYPE -- CAC Code: 81
ENTERPRISE compaq
VARIABLES { scellNameDateTime,
scellSWComponent,
scellECode,
scellCAC,
scellEIP}
DESCRIPTION
"Severity: Critical -- failure or failure imminent. A drive enclosure power supply voltage sensor out of range condition has been reported. The handle field contains the WWN of the drive enclosure containing the Drive Enclosure Environmental Monitoring Unit. This problem was detected by the Drive Enclosure Environmental Monitoring Unit located in the drive enclosure determined by the content of the denclNum field as follows: - If denclNum is less than 99, the location is as indicated by the content of the rackNum and denclNum fields.
- If denclNum is equal to 99, the location is unknown. Note that the content of the rackNum field is undefined in this case.
- If denclNum is greater than 99, the HSV110 controller does not have proof of the current location but the last known location is indicated by the content of the rackNum and denclNum fields. Subtract 100 from the content of those fields to determine the actual last known location. If there have been no configuration changes, the last known location values will be accurate.
Note that the content of the rackNum field will not be valid until a future release. The location of the voltage sensor (1 through 4) is identified in the alarmErrorCode.field.en field as follows: - 1 = Power Supply 1 +5 VDC
- 2 = Power Supply 1 +12 VDC
- 3 = Power Supply 2 +5 VDC
- 4 = Power Supply 2 +12 VDC
The voltage sensor out of range condition is described by the content of the alarmErrorCode.field.ec field as follows:
- 1 = The element voltage is approaching, but has not reached, the high voltage CRITICAL threshold. Continued operation under these conditions may result in a CRITICAL condition.
- 2 = The element voltage is above the high voltage CRITICAL threshold.
- 3 = The element voltage is approaching, but has not reached, the low voltage CRITICAL threshold. Continued operation under these conditions may result in a CRITICAL condition.
- 4 = The element voltage has reached the low voltage CRITICAL threshold.
The enclosures array shows the drive enclosures available on the Fibre Channel loop pair (0 = Loop A, 1 = Loop B) identified in the loop field. The location of an available drive enclosure is determined by the content of the enclosures.denclNum field as follows:
- If enclosures.denclNum is less than 99, the location is as indicated by the content of the enclosures.rackNum and enclosures.denclNum fields.
- If enclosures.denclNum is equal to 99, the enclosures array entry is not used. Note that the content of the enclosures.rackNum field is undefined in this case.
- If enclosures.denclNum is greater than 99, the HSV110 controller does not have proof of the current location but the last known location is indicated by the content of the enclosures.rackNum and enclosures.denclNum fields. Subtract 100 from the content of those fields to determine the actual last known location. If there have been no configuration changes, the last known location values will be accurate.
Note that the content of the enclosures.rackNum field will not be valid until a future release."
--#TYPE "StorageCell Event"
--#SUMMARY "SCellName-TimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."
--#ARGUMENTS {0,1,2,3,4,}
--#SEVERITY CRITICAL
--#TIMEINDEX 136
--#STATE WARNING
::= 13603489
sCellEventTrapDB5 TRAP-TYPE -- CAC Code: 81
ENTERPRISE compaq
VARIABLES { scellNameDateTime,
scellSWComponent,
scellECode,
scellCAC,
scellEIP}
DESCRIPTION
"Severity: Critical -- failure or failure imminent. A drive enclosure power supply current sensor out of range condition has been reported. The handle field contains the WWN of the drive enclosure containing the Drive Enclosure Environmental Monitoring Unit. This problem was detected by the Drive Enclosure Environmental Monitoring Unit located in the drive enclosure determined by the content of the denclNum field as follows: - If denclNum is less than 99, the location is as indicated by the content of the rackNum and denclNum fields.
- If denclNum is equal to 99, the location is unknown. Note that the content of the rackNum field is undefined in this case.
- If denclNum is greater than 99, the HSV110 controller does not have proof of the current location but the last known location is indicated by the content of the rackNum and denclNum fields. Subtract 100 from the content of those fields to determine the actual last known location. If there have been no configuration changes, the last known location values will be accurate.
Note that the content of the rackNum field will not be valid until a future release. The location of the current sensor (1 through 4) is identified in the alarmErrorCode.field.en field as follows: - 1 = Power Supply 1 +5 VDC
- 2 = Power Supply 1 +12 VDC
- 3 = Power Supply 2 +5 VDC
- 4 = Power Supply 2 +12 VDC
The current sensor out of range condition is described by the content of the alarmErrorCode.field.ec field as follows:
- 1 = The element current is approaching, but has not reached, the high current CRITICAL threshold. Continued operation under these conditions may result in a CRITICAL condition.
- 2 = The element current is above the high current CRITICAL threshold.
The enclosures array shows the drive enclosures available on the Fibre Channel loop pair (0 = Loop A, 1 = Loop B) identified in the loop field. The location of an available drive enclosure is determined by the content of the enclosures.denclNum field as follows:
- If enclosures.denclNum is less than 99, the location is as indicated by the content of the enclosures.rackNum and enclosures.denclNum fields.
- If enclosures.denclNum is equal to 99, the enclosures array entry is not used. Note that the content of the enclosures.rackNum field is undefined in this case.
- If enclosures.denclNum is greater than 99, the HSV110 controller does not have proof of the current location but the last known location is indicated by the content of the enclosures.rackNum and enclosures.denclNum fields. Subtract 100 from the content of those fields to determine the actual last known location. If there have been no configuration changes, the last known location values will be accurate.
Note that the content of the enclosures.rackNum field will not be valid until a future release."
--#TYPE "StorageCell Event"
--#SUMMARY "SCellName-TimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."
--#ARGUMENTS {0,1,2,3,4,}
--#SEVERITY CRITICAL
--#TIMEINDEX 136
--#STATE WARNING
::= 13603509
sCellEventTrapDD8 TRAP-TYPE -- CAC Code: 92
ENTERPRISE compaq
VARIABLES { scellNameDateTime,
scellSWComponent,
scellECode,
scellCAC,
scellEIP}
DESCRIPTION
"Severity: Warning -- not failed but attention recommended or required. A drive enclosure backplane invalid NVRAM read error has occurred. The handle field contains the WWN of the drive enclosure containing the Drive Enclosure Environmental Monitoring Unit.This problem was detected by the Drive Enclosure Environmental Monitoring Unit located in the drive enclosure determined by the content of the denclNum field as follows: - If denclNum is less than 99, the location is as indicated by the content of the rackNum and denclNum fields.
- If denclNum is equal to 99, the location is unknown. Note that the content of the rackNum field is undefined in this case.
- If denclNum is greater than 99, the HSV110 controller does not have proof of the current location but the last known location is indicated by the content of the rackNum and denclNum fields. Subtract 100 from the content of those fields to determine the actual last known location. If there have been no configuration changes, the last known location values will be accurate.
Note that the content of the rackNum field will not be valid until a future release. The alarmErrorCode.field.en field contains the value 1 signifying that the drive enclosure is the affected element. The enclosures array shows the drive enclosures available on the Fibre Channel loop pair (0 = Loop A, 1 = Loop B) identified in the loop field. The The location of an available drive enclosure is determined by the content of the enclosures.denclNum field as follows: - If enclosures.denclNum is less than 99, the location is as indicated by the content of the enclosures.rackNum and enclosures.denclNum fields.
- If enclosures.denclNum is equal to 99, the enclosures array entry is not used. Note that the content of the enclosures.rackNum field is undefined in this case.
- If enclosures.denclNum is greater than 99, the HSV110 controller does not have proof of the current location but the last known location is indicated by the content of the enclosures.rackNum and enclosures.denclNum fields. Subtract 100 from the content of those fields to determine the actual last known location. If there have been no configuration changes, the last known location values will be accurate.
Note that the content of the enclosures.rackNum field will not be valid until a future release."
--#TYPE "StorageCell Event"
--#SUMMARY "SCellName-TimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."
--#ARGUMENTS {0,1,2,3,4,}
--#SEVERITY MINOR
--#TIMEINDEX 136
--#STATE WARNING
::= 13603544
sCellEventTrapDD9 TRAP-TYPE -- CAC Code: 91
ENTERPRISE compaq
VARIABLES { scellNameDateTime,
scellSWComponent,
scellECode,
scellCAC,
scellEIP}
DESCRIPTION
"Severity: Critical -- failure or failure imminent. A drive enclosure backplane error has occurred. The handle field contains the WWN of the drive enclosure containing the Drive Enclosure Environmental Monitoring Unit. This problem was detected by the Drive Enclosure Environmental Monitoring Unit located in the drive enclosure determined by the content of the denclNum field as follows: - If denclNum is less than 99, the location is as indicated by the content of the rackNum and denclNum fields.
- If denclNum is equal to 99, the location is unknown. Note that the content of the rackNum field is undefined in this case.
- If denclNum is greater than 99, the HSV110 controller does not have proof of the current location but the last known location is indicated by the content of the rackNum and denclNum fields. Subtract 100 from the content of those fields to determine the actual last known location. If there have been no configuration changes, the last known location values will be accurate.
Note that the content of the rackNum field will not be valid until a future release. The alarmErrorCode.field.en field contains the value 1 signifying that the drive enclosure is the affected element. The cause of the improper operation is described by the content of the alarmErrorCode.field.ec field as follows: - 11 = Unable to write data to the NVRAM. This problem prevents communication between elements in the enclosure.
- 12 = Unable to read data from the NVRAM. This problem prevents communication between elements in the enclosure.
- 13 = NVRAM has not been initialized properly. This is a manufacturing error.
The enclosures array shows the drive enclosures available on the Fibre Channel loop pair (0 = Loop A, 1 = Loop B) identified in the loop field. The location of an available drive enclosure is determined by the content of the enclosures.denclNum field as follows:
- If enclosures.denclNum is less than 99, the location is as indicated by the content of the enclosures.rackNum and enclosures.denclNum fields.
- If enclosures.denclNum is equal to 99, the enclosures array entry is not used. Note that the content of the enclosures.rackNum field is undefined in this case.
- If enclosures.denclNum is greater than 99, the HSV110 controller does not have proof of the current location but the last known location is indicated by the content of the enclosures.rackNum and enclosures.denclNum fields. Subtract 100 from the content of those fields to determine the actual last known location. If there have been no configuration changes, the last known location values will be accurate.
Note that the content of the enclosures.rackNum field will not be valid until a future release."
--#TYPE "StorageCell Event"
--#SUMMARY "SCellName-TimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."
--#ARGUMENTS {0,1,2,3,4,}
--#SEVERITY CRITICAL
--#TIMEINDEX 136
--#STATE WARNING
::= 13603545
sCellEventTrapDDd TRAP-TYPE -- CAC Code: 93
ENTERPRISE compaq
VARIABLES { scellNameDateTime,
scellSWComponent,
scellECode,
scellCAC,
scellEIP}
DESCRIPTION
"Severity: Critical -- failure or failure imminent. A drive enclosure I/O module error has occurred. The handle field contains the WWN of the drive enclosure containing the Drive Enclosure Environmental Monitoring Unit. This problem was detected by the Drive Enclosure Environmental Monitoring Unit located in the drive enclosure determined by the content of the denclNum field as follows: - If denclNum is less than 99, the location is as indicated by the content of the rackNum and denclNum fields.
- If denclNum is equal to 99, the location is unknown. Note that the content of the rackNum field is undefined in this case.
- If denclNum is greater than 99, the HSV110 controller does not have proof of the current location but the last known location is indicated by the content of the rackNum and denclNum fields. Subtract 100 from the content of those fields to determine the actual last known location. If there have been no configuration changes, the last known location values will be accurate.
Note that the content of the rackNum field will not be valid until a future release. The location of the I/O module (A (01) and B (02)) is identified in the alarmErrorCode.field.en field. The cause of the improper operation is described by the content of the alarmErrorCode.field.ec field as follows: - 1 = The I/O module's Fibre Channel link speed is not supported by the backplane. This error prevents the controller from establishing a link with enclosure drives and eliminates the enclosure dual-loop capability.
- 11 = Unable to write data to the I/O module NVRAM.
- 12 = Unable to read data from the I/O module NVRAM.
- 13 = The I/O module that was in this location has been removed.
The enclosures array shows the drive enclosures available on the Fibre Channel loop pair (0 = Loop A, 1 = Loop B) identified in the loop field. The location of an available drive enclosure is determined by the content of the enclosures.denclNum field as follows:
- If enclosures.denclNum is less than 99, the location is as indicated by the content of the enclosures.rackNum and enclosures.denclNum fields.
- If enclosures.denclNum is equal to 99, the enclosures array entry is not used. Note that the content of the enclosures.rackNum field is undefined in this case.
- If enclosures.denclNum is greater than 99, the HSV110 controller does not have proof of the current location but the last known location is indicated by the content of the enclosures.rackNum and enclosures.denclNum fields. Subtract 100 from the content of those fields to determine the actual last known location. If there have been no configuration changes, the last known location values will be accurate.
Note that the content of the enclosures.rackNum field will not be valid until a future release."
--#TYPE "StorageCell Event"
--#SUMMARY "SCellName-TimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."
--#ARGUMENTS {0,1,2,3,4,}
--#SEVERITY CRITICAL
--#TIMEINDEX 136
--#STATE WARNING
::= 13603549
sCellEventTrapDDe TRAP-TYPE -- CAC Code: 95
ENTERPRISE compaq
VARIABLES { scellNameDateTime,
scellSWComponent,
scellECode,
scellCAC,
scellEIP}
DESCRIPTION
"Severity: Warning -- not failed but attention recommended or required. A drive enclosure I/O module is unable to communicate with the Drive Enclosure Environmental Monitoring Unit. The handle field contains the WWN of the drive enclosure containing the Drive Enclosure Environmental Monitoring Unit. This problem was detected by the Drive Enclosure Environmental Monitoring Unit located in the drive enclosure determined by the content of the denclNum field as follows: - If denclNum is less than 99, the location is as indicated by the content of the rackNum and denclNum fields.
- If denclNum is equal to 99, the location is unknown. Note that the content of the rackNum field is undefined in this case.
- If denclNum is greater than 99, the HSV110 controller does not have proof of the current location but the last known location is indicated by the content of the rackNum and denclNum fields. Subtract 100 from the content of those fields to determine the actual last known location. If there have been no configuration changes, the last known location values will be accurate.
Note that the content of the rackNum field will not be valid until a future release. The location of the I/O module (A (01) and B (02)) is identified in the alarmErrorCode.field.en field. The enclosures array shows the drive enclosures available on the Fibre Channel loop pair (0 = Loop A, 1 = Loop B) identified in the loop field. The location of an available drive enclosure is determined by the content of the enclosures.denclNum field as follows: - If enclosures.denclNum is less than 99, the location is as indicated by the content of the enclosures.rackNum and enclosures.denclNum fields.
- If enclosures.denclNum is equal to 99, the enclosures array entry is not used. Note that the content of the enclosures.rackNum field is undefined in this case.
- If enclosures.denclNum is greater than 99, the HSV110 controller does not have proof of the current location but the last known location is indicated by the content of the enclosures.rackNum and enclosures.denclNum fields. Subtract 100 from the content of those fields to determine the actual last known location. If there have been no configuration changes, the last known location values will be accurate.
Note that the content of the enclosures.rackNum field will not be valid until a future release."
--#TYPE "StorageCell Event"
--#SUMMARY "SCellName-TimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."
--#ARGUMENTS {0,1,2,3,4,}
--#SEVERITY MINOR
--#TIMEINDEX 136
--#STATE WARNING
::= 13603550
sCellEventTrapDEc TRAP-TYPE -- CAC Code: 94
ENTERPRISE compaq
VARIABLES { scellNameDateTime,
scellSWComponent,
scellECode,
scellCAC,
scellEIP}
DESCRIPTION
"Severity: Warning -- not failed but attention recommended or required. A drive enclosure I/O module invalid NVRAM read error has occurred. The handle field contains the WWN of the drive enclosure containing the Drive Enclosure Environmental Monitoring Unit.This problem was detected by the Drive Enclosure Environmental Monitoring Unit located in the drive enclosure determined by the content of the denclNum field as follows: - If denclNum is less than 99, the location is as indicated by the content of the rackNum and denclNum fields.
- If denclNum is equal to 99, the location is unknown. Note that the content of the rackNum field is undefined in this case.
- If denclNum is greater than 99, the HSV110 controller does not have proof of the current location but the last known location is indicated by the content of the rackNum and denclNum fields. Subtract 100 from the content of those fields to determine the actual last known location. If there have been no configuration changes, the last known location values will be accurate.
Note that the content of the rackNum field will not be valid until a future release. The location of the I/O module (A (01) or B (02)) is identified in the alarmErrorCode.field.en field. The enclosures array shows the drive enclosures available on the Fibre Channel loop pair (0 = Loop A, 1 = Loop B) identified in the loop field. The location of an available drive enclosure is determined by the content of the enclosures.denclNum field as follows: - If enclosures.denclNum is less than 99, the location is as indicated by the content of the enclosures.rackNum and enclosures.denclNum fields.
- If enclosures.denclNum is equal to 99, the enclosures array entry is not used. Note that the content of the enclosures.rackNum field is undefined in this case.
- If enclosures.denclNum is greater than 99, the HSV110 controller does not have proof of the current location but the last known location is indicated by the content of the enclosures.rackNum and enclosures.denclNum fields. Subtract 100 from the content of those fields to determine the actual last known location. If there have been no configuration changes, the last known location values will be accurate.
Note that the content of the enclosures.rackNum field will not be valid until a future release."
--#TYPE "StorageCell Event"
--#SUMMARY "SCellName-TimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."
--#ARGUMENTS {0,1,2,3,4,}
--#SEVERITY MINOR
--#TIMEINDEX 136
--#STATE WARNING
::= 13603564
sCellEventTrapDF0 TRAP-TYPE -- CAC Code: 0
ENTERPRISE compaq
VARIABLES { scellNameDateTime,
scellSWComponent,
scellECode,
scellCAC,
scellEIP}
DESCRIPTION
"Severity: Normal -- informational in nature. The status has changed on one or more of the drive enclosures. This is an informational event triggered by the occurrence of a change in the status of a drive enclosure. This event is generated for the HSV element manager GUI and contains no user information. The content of the handle, alarmErrorCode field, denclNum, and rackNum fields have no meaning for this event. The enclosures array shows the drive enclosures available on the Fibre Channel loop pair (0 = Loop A, 1 = Loop B) identified in the loop field. The location of an available drive enclosure is determined by the content of the enclosures.denclNum field as follows: - If enclosures.denclNum is less than 99, the location is as indicated by the content of the enclosures.rackNum and enclosures.denclNum fields.
- If enclosures.denclNum is equal to 99, the enclosures array entry is not used. Note that the content of the enclosures.rackNum field is undefined in this case.
- If enclosures.denclNum is greater than 99, the HSV110 controller does not have proof of the current location but the last known location is indicated by the content of the enclosures.rackNum and enclosures.denclNum fields. Subtract 100 from the content of those fields to determine the actual last known location. If there have been no configuration changes, the last known location values will be accurate.
Note that the content of the enclosures.rackNum field will not be valid until a future release."
--#TYPE "StorageCell Event"
--#SUMMARY "SCellName-TimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."
--#ARGUMENTS {0,1,2,3,4,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
--#STATE WARNING
::= 13603568
sCellEventTrap420 TRAP-TYPE -- CAC Code: 0
ENTERPRISE compaq
VARIABLES { scellNameDateTime,
scellSWComponent,
scellECode,
scellCAC,
scellEIP}
DESCRIPTION
"Severity: Normal -- informational in nature. Indicated Host Fibre Channel port transitioned to link down."
--#TYPE "StorageCell Event"
--#SUMMARY "SCellName-TimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."
--#ARGUMENTS {0,1,2,3,4,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
--#STATE WARNING
::= 13616896
sCellEventTrap421 TRAP-TYPE -- CAC Code: 0
ENTERPRISE compaq
VARIABLES { scellNameDateTime,
scellSWComponent,
scellECode,
scellCAC,
scellEIP}
DESCRIPTION
"Severity: Normal -- informational in nature. Indicated Host Fibre Channel port transitioned to link failed."
--#TYPE "StorageCell Event"
--#SUMMARY "SCellName-TimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."
--#ARGUMENTS {0,1,2,3,4,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
--#STATE WARNING
::= 13616897
sCellEventTrap423 TRAP-TYPE -- CAC Code: 0
ENTERPRISE compaq
VARIABLES { scellNameDateTime,
scellSWComponent,
scellECode,
scellCAC,
scellEIP}
DESCRIPTION
"Severity: Normal -- informational in nature. An excessive number of link errors were detected on a HSV110 controller's Fibre Channel port. The identity of the affected Fibre Channel port is contained in the cerpId field. The HSV110 controller internal Fibre Channel port number of the affected Fibre Channel port is contained in the port field. This is an informational event triggered by the occurrence of an excessive number of Tachyon chip link status errors detected within a particular link status error type. The number of occurrences of each link status error type is contained in a separate type-specific field (e.g., lossOfSignal, badRxChar, etc.). The HSV110 controller checks each of its Fibre Channel port's for excessive link status errors periodically."
--#TYPE "StorageCell Event"
--#SUMMARY "SCellName-TimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."
--#ARGUMENTS {0,1,2,3,4,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
--#STATE WARNING
::= 13616899
sCellEventTrap424 TRAP-TYPE -- CAC Code: 4a
ENTERPRISE compaq
VARIABLES { scellNameDateTime,
scellSWComponent,
scellECode,
scellCAC,
scellEIP}
DESCRIPTION
"Severity: Warning -- not failed but attention recommended or required. A Fibre Channel port on the HSV110 controller has failed to respond. The identity of the affected Fibre Channel port is contained in the cerpId field. The HSV110 controller internal Fibre Channel port number of the affected Fibre Channel port is contained in the port field. The peb array contains the port event block information. The peqFrzProdIndex field contains the index to the port event block in use when the Tachyon chip entered the frozen state. The peqProdIndex field contains the index to the next port event block. The peqConsIndex field contains the index to the next port event block to be acted upon."
--#TYPE "StorageCell Event"
--#SUMMARY "SCellName-TimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."
--#ARGUMENTS {0,1,2,3,4,}
--#SEVERITY MINOR
--#TIMEINDEX 136
--#STATE WARNING
::= 13616900
sCellEventTrap425 TRAP-TYPE -- CAC Code: 0
ENTERPRISE compaq
VARIABLES { scellNameDateTime,
scellSWComponent,
scellECode,
scellCAC,
scellEIP}
DESCRIPTION
"Severity: Normal -- informational in nature. Indicated Host Fibre Channel port transitioned to link wedged."
--#TYPE "StorageCell Event"
--#SUMMARY "SCellName-TimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."
--#ARGUMENTS {0,1,2,3,4,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
--#STATE WARNING
::= 13616901
sCellEventTrap830 TRAP-TYPE -- CAC Code: 20
ENTERPRISE compaq
VARIABLES { scellNameDateTime,
scellSWComponent,
scellECode,
scellCAC,
scellEIP}
DESCRIPTION
"Severity: Critical -- failure or failure imminent. A failure was detected during the execution of this HSV110 controller's on board diagnostics."
--#TYPE "StorageCell Event"
--#SUMMARY "SCellName-TimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."
--#ARGUMENTS {0,1,2,3,4,}
--#SEVERITY CRITICAL
--#TIMEINDEX 136
--#STATE WARNING
::= 13633536
sCellEventTrap831 TRAP-TYPE -- CAC Code: 30
ENTERPRISE compaq
VARIABLES { scellNameDateTime,
scellSWComponent,
scellECode,
scellCAC,
scellEIP}
DESCRIPTION
"Severity: Warning -- not failed but attention recommended or required. A GBIC SFF Serial ID Data check code failure was detected during the execution of this HSV110 controller's on board diagnostics."
--#TYPE "StorageCell Event"
--#SUMMARY "SCellName-TimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."
--#ARGUMENTS {0,1,2,3,4,}
--#SEVERITY MINOR
--#TIMEINDEX 136
--#STATE WARNING
::= 13633537
sCellEventTrap832 TRAP-TYPE -- CAC Code: 22
ENTERPRISE compaq
VARIABLES { scellNameDateTime,
scellSWComponent,
scellECode,
scellCAC,
scellEIP}
DESCRIPTION
"Severity: Critical -- failure or failure imminent. A battery assembly failure was detected during the execution of this HSV110 controller's on board diagnostics."
--#TYPE "StorageCell Event"
--#SUMMARY "SCellName-TimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."
--#ARGUMENTS {0,1,2,3,4,}
--#SEVERITY CRITICAL
--#TIMEINDEX 136
--#STATE WARNING
::= 13633538
sCellEventTrap833 TRAP-TYPE -- CAC Code: 23
ENTERPRISE compaq
VARIABLES { scellNameDateTime,
scellSWComponent,
scellECode,
scellCAC,
scellEIP}
DESCRIPTION
"Severity: Critical -- failure or failure imminent. A battery assembly failure was detected during the execution of this HSV110 controller's on board diagnostics."
--#TYPE "StorageCell Event"
--#SUMMARY "SCellName-TimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."
--#ARGUMENTS {0,1,2,3,4,}
--#SEVERITY CRITICAL
--#TIMEINDEX 136
--#STATE WARNING
::= 13633539
sCellEventTrap834 TRAP-TYPE -- CAC Code: 31
ENTERPRISE compaq
VARIABLES { scellNameDateTime,
scellSWComponent,
scellECode,
scellCAC,
scellEIP}
DESCRIPTION
"Severity: Critical -- failure or failure imminent. A battery assembly communication failure was detected during the execution of this HSV110 controller's on board diagnostics."
--#TYPE "StorageCell Event"
--#SUMMARY "SCellName-TimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."
--#ARGUMENTS {0,1,2,3,4,}
--#SEVERITY CRITICAL
--#TIMEINDEX 136
--#STATE WARNING
::= 13633540
sCellEventTrap835 TRAP-TYPE -- CAC Code: 32
ENTERPRISE compaq
VARIABLES { scellNameDateTime,
scellSWComponent,
scellECode,
scellCAC,
scellEIP}
DESCRIPTION
"Severity: Critical -- failure or failure imminent. A battery assembly communication failure was detected during the execution of this HSV110 controller's on board diagnostics."
--#TYPE "StorageCell Event"
--#SUMMARY "SCellName-TimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."
--#ARGUMENTS {0,1,2,3,4,}
--#SEVERITY CRITICAL
--#TIMEINDEX 136
--#STATE WARNING
::= 13633541
sCellEventTrap836 TRAP-TYPE -- CAC Code: 33
ENTERPRISE compaq
VARIABLES { scellNameDateTime,
scellSWComponent,
scellECode,
scellCAC,
scellEIP}
DESCRIPTION
"Severity: Critical -- failure or failure imminent. A soft cache memory ECC error or indication of low battery voltage was detected during the execution of this HSV110 controller's on board diagnostics."
--#TYPE "StorageCell Event"
--#SUMMARY "SCellName-TimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."
--#ARGUMENTS {0,1,2,3,4,}
--#SEVERITY CRITICAL
--#TIMEINDEX 136
--#STATE WARNING
::= 13633542
-- Following are the traps defined for the HSV Management Agent
-- The trap name is constructed from the unique status code for
-- the Management Event. This numbers is represented as
-- a decimal number.
-- For example: mngmtAgentTrap5009 has:
-- Status Code of 5009
-- The Trap number is calculated by using the status code + a base
-- In our example above: mngmtAgentTrap5009 the trap number is -
-- Base = 136000000 (which preserves our unique OID sub-identifier of 136) +
-- + status code 5009 = 136005009
-- This allows for a large number of uniquely mapped events and
-- avoids trap number collisions with StorageCell Event traps.
mngmtAgentTrap1 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Object Already Exists"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136000001
mngmtAgentTrap2 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Supplied Buffer Too Small"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136000002
mngmtAgentTrap3 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Object Already Assigned"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136000003
mngmtAgentTrap4 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Insufficient Available Data Storage"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY CRITICAL
--#TIMEINDEX 136
::= 136000004
mngmtAgentTrap5 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Internal Error"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY MINOR
--#TIMEINDEX 136
::= 136000005
mngmtAgentTrap6 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Invalid status for logical disk"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136000006
mngmtAgentTrap7 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Invalid Class"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136000007
mngmtAgentTrap8 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Invalid Function"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136000008
mngmtAgentTrap9 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Invalid Logical Disk Block State"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136000009
mngmtAgentTrap10 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Invalid Loop Configuration"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136000010
mngmtAgentTrap11 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Invalid Parameter"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136000011
mngmtAgentTrap12 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Invalid Parameter handle"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136000012
mngmtAgentTrap13 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Invalid Parameter Id"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136000013
mngmtAgentTrap14 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Invalid Quorum Configuration"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136000014
mngmtAgentTrap15 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Invalid Target Handle"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136000015
mngmtAgentTrap16 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Invalid Target Id"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136000016
mngmtAgentTrap17 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Invalid Time"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136000017
mngmtAgentTrap18 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Media is Inaccessible"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY MINOR
--#TIMEINDEX 136
::= 136000018
mngmtAgentTrap19 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"No Fibre Channel Port"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY MINOR
--#TIMEINDEX 136
::= 136000019
mngmtAgentTrap20 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"No Image"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136000020
mngmtAgentTrap21 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"No Permission"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136000021
mngmtAgentTrap22 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Storage system not initialized"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136000022
mngmtAgentTrap23 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Not a Loop Port"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136000023
mngmtAgentTrap24 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Not a Participating Controller"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136000024
mngmtAgentTrap25 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Objects in your system are in use, and their state prevents the operation you wish to perform."
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136000025
mngmtAgentTrap26 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Parameter Object Does Not Exist"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136000026
mngmtAgentTrap27 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Target Object Does Not Exist"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136000027
mngmtAgentTrap28 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Timeout"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136000028
mngmtAgentTrap29 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Unknown Id"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136000029
mngmtAgentTrap30 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Unknown Parameter Handle"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136000030
mngmtAgentTrap31 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Unrecoverable Media Error"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY MAJOR
--#TIMEINDEX 136
::= 136000031
mngmtAgentTrap32 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Invalid State"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136000032
mngmtAgentTrap33 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Transport Error"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY MINOR
--#TIMEINDEX 136
::= 136000033
mngmtAgentTrap34 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Volume is Missing"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY MINOR
--#TIMEINDEX 136
::= 136000034
mngmtAgentTrap35 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Invalid Cursor"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136000035
mngmtAgentTrap36 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Invalid Target for the Operation"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136000036
mngmtAgentTrap37 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"No More Events"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136000037
mngmtAgentTrap38 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Lock Busy"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136000038
mngmtAgentTrap39 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Time Not Set"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136000039
mngmtAgentTrap40 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Not a Supported Version"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136000040
mngmtAgentTrap41 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"No Logical Disk for Vdisk"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136000041
mngmtAgentTrap42 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Logical disk Presented"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136000042
mngmtAgentTrap43 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Operation Denied On Slave"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY MINOR
--#TIMEINDEX 136
::= 136000043
mngmtAgentTrap44 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Not licensed for data replication"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136000044
mngmtAgentTrap45 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Not DR group member"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136000045
mngmtAgentTrap46 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Invalid DR mode"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136000046
mngmtAgentTrap47 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Invalid DR State"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136000047
mngmtAgentTrap48 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Security credentials needed. Please update your system's ID and password in the Storage System Access menu."
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136000048
mngmtAgentTrap49 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Security credentials supplied were invalid. Please update your system's ID and password in the Storage System Access menu."
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136000049
mngmtAgentTrap50 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Security credentials supplied were invalid. Please update your system's ID and password in the Storage System Access menu."
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136000050
mngmtAgentTrap51 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Storage system connection down"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY MINOR
--#TIMEINDEX 136
::= 136000051
mngmtAgentTrap52 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"DR group empty"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136000052
mngmtAgentTrap53 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Incompatible attribute"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136000053
mngmtAgentTrap54 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Vdisk is a DR group member"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136000054
mngmtAgentTrap55 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Vdisk is a DR log unit"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136000055
mngmtAgentTrap56 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Cache batteries failed or missing."
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136000056
mngmtAgentTrap57 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Vdisk is not presented"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136000057
mngmtAgentTrap58 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Other controller failed"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY MINOR
--#TIMEINDEX 136
::= 136000058
mngmtAgentTrap59 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Maximum Number of Objects Exceeded."
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136000059
mngmtAgentTrap60 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Max size"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136000060
mngmtAgentTrap61 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Password mismatch. Please update your system's password in the Storage System Access menu. Continued attempts to access this storage system with an incorrect password will disable management of this storage system."
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136000061
mngmtAgentTrap62 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"DR group is merging"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136000062
mngmtAgentTrap63 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"DR group is logging"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136000063
mngmtAgentTrap64 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Connection is suspended"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136000064
mngmtAgentTrap65 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Bad image header"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136000065
mngmtAgentTrap66 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Bad image"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136000066
mngmtAgentTrap67 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Image too large"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136000067
mngmtAgentTrap68 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"EMU not available"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136000068
mngmtAgentTrap69 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"EMU indefinite delay"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136000069
mngmtAgentTrap70 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Image incompatible with system configuration. Version conflict in upgrade or downgrade not allowed."
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136000070
mngmtAgentTrap71 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Bad image segment"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136000071
mngmtAgentTrap72 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Image already loaded"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136000072
mngmtAgentTrap73 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Image Write Error"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136000073
mngmtAgentTrap74 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Logical Disk Sharing"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136000074
mngmtAgentTrap75 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Bad Image Size"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136000075
mngmtAgentTrap76 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Image Load Busy"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136000076
mngmtAgentTrap77 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Volume Failure Predicted"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY CRITICAL
--#TIMEINDEX 136
::= 136000077
mngmtAgentTrap78 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Background allocation on the destination member is in progress. This action must complete before any others can be initiated ."
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136000078
mngmtAgentTrap79 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Invalid Predecessor Vdisk Condition"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136000079
mngmtAgentTrap80 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Invalid Volume Usage"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136000080
mngmtAgentTrap81 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Minimum Volumes In Disk Group"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136000081
mngmtAgentTrap82 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Shutdown In Progress"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136000082
mngmtAgentTrap83 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Not Ready"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136000083
mngmtAgentTrap84 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Is Snapshot"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136000084
mngmtAgentTrap85 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Cannot add or remove DR group member. Mirror cache must be active for this Vdisk. Check controller cache condition."
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136000085
mngmtAgentTrap86 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Inoperative"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136000086
mngmtAgentTrap87 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Disk group inoperative or less than 8 disks in group"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY MINOR
--#TIMEINDEX 136
::= 136000087
mngmtAgentTrap88 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Storage system inoperative"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY CRITICAL
--#TIMEINDEX 136
::= 136000088
mngmtAgentTrap89 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Failsafe Locked"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136000089
mngmtAgentTrap90 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Data Flush Incomplete"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY MINOR
--#TIMEINDEX 136
::= 136000090
mngmtAgentTrap91 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Redundancy Mirrored Inoperative"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136000091
mngmtAgentTrap92 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Duplicate LUN"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136000092
mngmtAgentTrap93 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Other remote controller failed"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY MINOR
--#TIMEINDEX 136
::= 136000093
mngmtAgentTrap94 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Unknown remote Vdisk"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136000094
mngmtAgentTrap95 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Unknown remote DR group"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136000095
mngmtAgentTrap96 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"PLDMC failed"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY CRITICAL
--#TIMEINDEX 136
::= 136000096
mngmtAgentTrap97 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Storage system could not be locked. System busy. Try command again. "
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY CRITICAL
--#TIMEINDEX 136
::= 136000097
mngmtAgentTrap98 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Error on remote storage system."
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136000098
mngmtAgentTrap99 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"This operation can only be completed when the source-destination connection is down."
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136000099
mngmtAgentTrap100 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Login required - password changed."
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136000100
mngmtAgentTrap101 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Numerous login attempts have been detected that uses an incorrect password. Please update your system's password in the Storage System Access menu."
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136000101
mngmtAgentTrap102 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Invalid cookie"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136000102
mngmtAgentTrap103 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Login timed out"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136000103
mngmtAgentTrap104 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Max snapshot depth reached"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136000104
mngmtAgentTrap105 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Attribute mismatch"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136000105
mngmtAgentTrap106 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"The password has been set in Command View EVA. The same password still needs to be set in the controllers."
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136000106
mngmtAgentTrap107 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Not host port"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136000107
mngmtAgentTrap108 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Duplicate Lun WWID"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136000108
mngmtAgentTrap109 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"System Inoperative"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136000109
mngmtAgentTrap110 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"SnapClone Active"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136000110
mngmtAgentTrap111 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Emu Load Busy"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136000111
mngmtAgentTrap112 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Duplicate User Name"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136000112
mngmtAgentTrap113 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Drive Reserved For Code Load"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136000113
mngmtAgentTrap114 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Already Presented"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136000114
mngmtAgentTrap115 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Invalid remote storage system"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136000115
mngmtAgentTrap116 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"No Lock"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136000116
mngmtAgentTrap117 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Maximum Number of Members Exceeded"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136000117
mngmtAgentTrap118 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Max Destinations"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136000118
mngmtAgentTrap119 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Empty User Name"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136000119
mngmtAgentTrap120 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Storage system already initialized"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136000120
mngmtAgentTrap121 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Already Open"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136000121
mngmtAgentTrap122 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Session Not Open"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136000122
mngmtAgentTrap123 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Not Marked Inoperative"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136000123
mngmtAgentTrap124 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Media Not Available"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136000124
mngmtAgentTrap125 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Battery System Failed"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136000125
mngmtAgentTrap126 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"DR Group Member Is Cache Data Lost"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136000126
mngmtAgentTrap127 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Internal Lock Collision"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136000127
mngmtAgentTrap128 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"OCP Error"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136000128
mngmtAgentTrap129 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Mirror Offline"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136000129
mngmtAgentTrap130 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"This operation cannot be completed if failsafe mode is enabled."
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136000130
mngmtAgentTrap131 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Drive firmware load abort due to Raid0 virtual disk(s)."
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136000131
mngmtAgentTrap132 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Fibre channel ports are unavailable."
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136000132
mngmtAgentTrap133 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"The storage system has reached its maximum number of DR relationship."
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136000133
mngmtAgentTrap1000 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Logical Disk Condition Change"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136001000
mngmtAgentTrap1001 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Storage system is FULL **critical**"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY CRITICAL
--#TIMEINDEX 136
::= 136001001
mngmtAgentTrap1002 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Storage system is almost FULL. Disk group at or above maximum capacity warning level."
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY MINOR
--#TIMEINDEX 136
::= 136001002
mngmtAgentTrap1003 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Controller Cache Battery Condition Change"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136001003
mngmtAgentTrap1004 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Controller Cache Condition Change"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136001004
mngmtAgentTrap1005 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Controller Condition Change"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136001005
mngmtAgentTrap1006 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Controller FC Port Condition Change"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136001006
mngmtAgentTrap1007 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Physical Device Condition Change"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136001007
mngmtAgentTrap1008 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Physical Store Condition Change"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136001008
mngmtAgentTrap1009 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Host condition change"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136001009
mngmtAgentTrap1010 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Storage system time has been set"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136001010
mngmtAgentTrap1011 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Volume Condition change"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136001011
mngmtAgentTrap1012 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Volume insufficientResources condition change"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136001012
mngmtAgentTrap1013 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Volume Quorum Disk change"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136001013
mngmtAgentTrap1014 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"The state of an object in the system has changed. View adjacent events for more detail."
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136001014
mngmtAgentTrap2001 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Startup Failed"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY CRITICAL
--#TIMEINDEX 136
::= 136002001
mngmtAgentTrap2002 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Management agent event log cleared successfully"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136002002
mngmtAgentTrap2003 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Invalid name specified for storage system"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY MINOR
--#TIMEINDEX 136
::= 136002003
mngmtAgentTrap2004 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Storage system is not initialized"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136002004
mngmtAgentTrap2006 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Invalid name specified for Vdisk"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY MINOR
--#TIMEINDEX 136
::= 136002006
mngmtAgentTrap2007 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Vdisk name exceeds maximum length"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY MINOR
--#TIMEINDEX 136
::= 136002007
mngmtAgentTrap2008 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Invalid parameter specified for Vdisk"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY MINOR
--#TIMEINDEX 136
::= 136002008
mngmtAgentTrap2010 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Specified Vdisk size exceeds available size"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY MINOR
--#TIMEINDEX 136
::= 136002010
mngmtAgentTrap2011 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"There are not enough disk drives to create a disk group"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136002011
mngmtAgentTrap2012 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Number of devices exceeds the available number of disks"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY MINOR
--#TIMEINDEX 136
::= 136002012
mngmtAgentTrap2013 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Number of devices is less than the minimum number required to create a disk group"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY MINOR
--#TIMEINDEX 136
::= 136002013
mngmtAgentTrap2016 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Completed unpresenting virtual disk to host"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY MINOR
--#TIMEINDEX 136
::= 136002016
mngmtAgentTrap2021 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Invalid refresh interval value. Should be numeric and non-negative."
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY MINOR
--#TIMEINDEX 136
::= 136002021
mngmtAgentTrap2022 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Invalid security message. Should not be blank."
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY MINOR
--#TIMEINDEX 136
::= 136002022
mngmtAgentTrap2023 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Vdisk Create Complete"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136002023
mngmtAgentTrap2025 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Storage system successfully initialized"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136002025
mngmtAgentTrap2026 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Device Added Successfully"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136002026
mngmtAgentTrap2030 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Refresh Interval Changed"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136002030
mngmtAgentTrap2031 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Security Message Changed"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136002031
mngmtAgentTrap2032 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Present Vdisk to a Host - Complete"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136002032
mngmtAgentTrap2033 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Control Startup Complete"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136002033
mngmtAgentTrap2034 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Change Device Usage Complete"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136002034
mngmtAgentTrap2035 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Control Shutdown - Complete"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136002035
mngmtAgentTrap2036 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Controller Shutdown - Complete"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136002036
mngmtAgentTrap2038 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Control Memory Allocation Failure"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY CRITICAL
--#TIMEINDEX 136
::= 136002038
mngmtAgentTrap2040 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Access level denied or session activity timeout. Please log in again."
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136002040
mngmtAgentTrap2041 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Vdisk Snapshot - Completed"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136002041
mngmtAgentTrap2042 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Vdisk Snapclone - Completed"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136002042
mngmtAgentTrap2047 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Host record added successfully"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136002047
mngmtAgentTrap2048 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Logical component deleted successfully"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136002048
mngmtAgentTrap2049 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Invalid host adapter ID"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136002049
mngmtAgentTrap2050 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Specified device is already a member of the system"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136002050
mngmtAgentTrap2051 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Create Folder - Completed"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136002051
mngmtAgentTrap2052 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Change Object Properties - Completed"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136002052
mngmtAgentTrap2057 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Completed disk group creation"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136002057
mngmtAgentTrap2058 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Added host port"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136002058
mngmtAgentTrap2059 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Discarded host port"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136002059
mngmtAgentTrap2060 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"EMU/Shelf code load complete"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136002060
mngmtAgentTrap2061 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Operation will exceed the available capacity of the disk group"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136002061
mngmtAgentTrap2062 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Controller(s) code load complete"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136002062
mngmtAgentTrap2063 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"The target device is not in the right condition to perform the operation"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136002063
mngmtAgentTrap2064 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Storage system Device Addition Policy changed successfully"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136002064
mngmtAgentTrap2065 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Maximum number of disk groups exceeded"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136002065
mngmtAgentTrap2066 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Nsa object discard failed."
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY MINOR
--#TIMEINDEX 136
::= 136002066
mngmtAgentTrap2067 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"There are not enough disks to meet the minimum number requirement"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY MINOR
--#TIMEINDEX 136
::= 136002067
mngmtAgentTrap2068 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Entry added successfully in the password file"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136002068
mngmtAgentTrap2069 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Entry updated successfully in the password file"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136002069
mngmtAgentTrap2070 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Entry discarded successfully in the password file"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136002070
mngmtAgentTrap2071 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Storage system is not responding in a timely manner and has been placed into an unknown state. This may be due to a prior command with an excessively long execution time, high I/O load, or a network communications error. Recovery will automatically occur when the storage system is able to respond. "
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136002071
mngmtAgentTrap2072 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Object not found. Operation on this object is completed"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136002072
mngmtAgentTrap2073 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"There is no more available space to create a Vdisk"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136002073
mngmtAgentTrap2074 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Name or comments contains invalid character(s)"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136002074
mngmtAgentTrap2075 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Duplicate - Another object with the same name exists."
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136002075
mngmtAgentTrap2076 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"No healthy disk group(s) to create a Vdisk. Resolve any abnormal conditions in the disk group first."
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136002076
mngmtAgentTrap2077 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Operating System ID must be a valid number."
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136002077
mngmtAgentTrap2078 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Watchdog successfully started"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136002078
mngmtAgentTrap2079 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Watchdog successfully stopped"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136002079
mngmtAgentTrap2080 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Delete Event Config List failed"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY MINOR
--#TIMEINDEX 136
::= 136002080
mngmtAgentTrap2081 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Disk group meltdown repaired successfully."
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136002081
mngmtAgentTrap2082 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"There are no available LUNs to present this Vdisk."
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136002082
mngmtAgentTrap2083 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Controller time synchronization turned on."
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136002083
mngmtAgentTrap2084 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Controller time synchronization turned off."
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136002084
mngmtAgentTrap2085 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"System login failed. Invalid password."
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136002085
mngmtAgentTrap2086 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"System is not set for password validation."
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136002086
mngmtAgentTrap2087 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Agent is already logged in to this system."
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136002087
mngmtAgentTrap2088 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Storage system time set to custom time. Controller time synchronization automatically turned off."
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136002088
mngmtAgentTrap2089 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Storage system time set to SAN appliance time."
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136002089
mngmtAgentTrap2090 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Storage system time set to browser time. Controller time synchronization automatically turned off."
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136002090
mngmtAgentTrap2091 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Storage system time set to controller time. Controller time synchronization automatically turned off."
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136002091
mngmtAgentTrap2092 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Unable to find DR Group on remote storage system."
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136002092
mngmtAgentTrap2093 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"A host must have at least one port. Cannot delete the only host port available."
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136002093
mngmtAgentTrap2095 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Host creation failed. Maximum number of hosts reached."
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136002095
mngmtAgentTrap2096 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Port already exists for this host."
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136002096
mngmtAgentTrap2097 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Error reading parameter string. String is empty."
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136002097
mngmtAgentTrap2098 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Command could not be completed on Master. Controller not found."
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136002098
mngmtAgentTrap2099 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Command could not be completed on Slave. Controller not found."
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136002099
mngmtAgentTrap2100 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Password access for all known storage systems is already enabled or set."
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136002100
mngmtAgentTrap2102 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"The local storage system has reached the maximum allowable DR relationship."
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136002102
mngmtAgentTrap2103 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"The remote storage system has reached the maximum allowable DR relationship."
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136002103
mngmtAgentTrap3001 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Event Manager Offline"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136003001
mngmtAgentTrap3002 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Event Manager Online"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136003002
mngmtAgentTrap3003 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Event Manager - Startup Failed"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY CRITICAL
--#TIMEINDEX 136
::= 136003003
mngmtAgentTrap3004 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Event Manager - Startup Complete"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136003004
mngmtAgentTrap3007 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Event Manager - Shutdown Complete"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136003007
mngmtAgentTrap3009 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Unable to open NSA Local Event Log File"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY MINOR
--#TIMEINDEX 136
::= 136003009
mngmtAgentTrap3012 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Unable to open Local Temp Event File - possibly no initialized SC"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY MINOR
--#TIMEINDEX 136
::= 136003012
mngmtAgentTrap3013 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Unable to clear NSA Local Event Log File"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY MINOR
--#TIMEINDEX 136
::= 136003013
mngmtAgentTrap3015 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Unable to clear NSA Event Log File"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY MINOR
--#TIMEINDEX 136
::= 136003015
mngmtAgentTrap3016 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Local log file found on startup"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY MINOR
--#TIMEINDEX 136
::= 136003016
mngmtAgentTrap3017 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Event Queue Flush Error"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY MINOR
--#TIMEINDEX 136
::= 136003017
mngmtAgentTrap3019 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"EM File Manager Online"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136003019
mngmtAgentTrap3020 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"EM File Manager Offline"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136003020
mngmtAgentTrap3021 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"EM Log Manager Online"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136003021
mngmtAgentTrap3022 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"EM Log Manager Offline"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136003022
mngmtAgentTrap3024 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Local NSA logfile is empty"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136003024
mngmtAgentTrap3025 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Event Queue Online"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136003025
mngmtAgentTrap3028 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Status Descriptions Unavailable"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY MINOR
--#TIMEINDEX 136
::= 136003028
mngmtAgentTrap3029 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"EM Description Mngr Online"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136003029
mngmtAgentTrap3035 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"EM: NSA log file unavailable"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY MINOR
--#TIMEINDEX 136
::= 136003035
mngmtAgentTrap3036 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"EM Memory Allocation Error"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY CRITICAL
--#TIMEINDEX 136
::= 136003036
mngmtAgentTrap3037 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"EM: Local Event Configuration File Unavailable"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY MINOR
--#TIMEINDEX 136
::= 136003037
mngmtAgentTrap3038 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"EM: MLD Notification File Unavailable - retrieving local backup copy"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY MINOR
--#TIMEINDEX 136
::= 136003038
mngmtAgentTrap3039 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"EM: Local Notification Host List File Unavailable"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY MINOR
--#TIMEINDEX 136
::= 136003039
mngmtAgentTrap3044 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Override this description with missing filename"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136003044
mngmtAgentTrap3045 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Invalid storage system event sequence number - can't retrieve event"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136003045
mngmtAgentTrap3046 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Invalid SC termination event sequence number - can't retrieve event"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136003046
mngmtAgentTrap3047 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"EM: Event config file unavailable from MLD - retrieving local backup copy"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY MINOR
--#TIMEINDEX 136
::= 136003047
mngmtAgentTrap3048 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"EM: Local user defined event state file unavailable"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136003048
mngmtAgentTrap3049 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"EM: EMU event monitoring thread unable to start"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136003049
mngmtAgentTrap3050 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"EM: EMU event - this description will be overwritten"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY CRITICAL
--#TIMEINDEX 136
::= 136003050
mngmtAgentTrap3051 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"EM: Failed to write Event Config file to MLD"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY MINOR
--#TIMEINDEX 136
::= 136003051
mngmtAgentTrap3053 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"EM: Event Configuration Filename Error or File empty"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136003053
mngmtAgentTrap3054 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"EM: Notification Hostlist Filename Error or File empty"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136003054
mngmtAgentTrap3055 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"EM: Event Config List Object Reference Error"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY MINOR
--#TIMEINDEX 136
::= 136003055
mngmtAgentTrap3056 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"EM: SC Parse File successfully uploaded"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136003056
mngmtAgentTrap3057 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"EM: SC Parse File upload failed"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136003057
mngmtAgentTrap3058 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"EM: Contents of the uploaded parse file invalid - unexpected contents"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY MINOR
--#TIMEINDEX 136
::= 136003058
mngmtAgentTrap3059 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"EM: Parse file is empty"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY MINOR
--#TIMEINDEX 136
::= 136003059
mngmtAgentTrap3060 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Storage system being shutdown due to a command failure."
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY CRITICAL
--#TIMEINDEX 136
::= 136003060
mngmtAgentTrap3061 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"EM: Could not retrieve a storage system event"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136003061
mngmtAgentTrap3062 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"EM: Init SC Event config list failed"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136003062
mngmtAgentTrap3063 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Could not initialize Comm infrastructure for event logging to system log"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY MINOR
--#TIMEINDEX 136
::= 136003063
mngmtAgentTrap3064 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"EM: Storage system pointer is NULL!"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY CRITICAL
--#TIMEINDEX 136
::= 136003064
mngmtAgentTrap3065 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"EM: Failed to log event to the Appliance event log: check if log is full"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY CRITICAL
--#TIMEINDEX 136
::= 136003065
mngmtAgentTrap3066 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"EM: Description Mngr initialize storage system failed"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY MINOR
--#TIMEINDEX 136
::= 136003066
mngmtAgentTrap3067 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"EM: Description file too small. File read problem Or Incomplete file."
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY MINOR
--#TIMEINDEX 136
::= 136003067
mngmtAgentTrap3068 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"EM: Can't init NT Event object pointer"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY CRITICAL
--#TIMEINDEX 136
::= 136003068
mngmtAgentTrap3069 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"EM: Can't init NT Notification object pointer"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY CRITICAL
--#TIMEINDEX 136
::= 136003069
mngmtAgentTrap3070 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"EM: Appliance Event Logging Failure - log may be full"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY CRITICAL
--#TIMEINDEX 136
::= 136003070
mngmtAgentTrap3071 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"EM: SCMI returned bad additional events number"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY MINOR
--#TIMEINDEX 136
::= 136003071
mngmtAgentTrap3072 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"EM: SCMI returned zero sized SC Event"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY MINOR
--#TIMEINDEX 136
::= 136003072
mngmtAgentTrap3075 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"EventQueue index passed is out of bounds"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136003075
mngmtAgentTrap3076 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"EM: An abnormal number of duplicate events logged - dropping duplicates"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY MINOR
--#TIMEINDEX 136
::= 136003076
mngmtAgentTrap3077 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"EM: Update of the MLD Status Description file failed"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136003077
mngmtAgentTrap3078 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"EM: NsaStatusDescriptions.txt open file error"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136003078
mngmtAgentTrap3079 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"EM: NsaStatusDescriptions.txt file error - file size discrepancy from mld list"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136003079
mngmtAgentTrap3080 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"SC Event Log has been cleared and restarted. Possible RAID1 Meltdown."
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY CRITICAL
--#TIMEINDEX 136
::= 136003080
mngmtAgentTrap3081 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Invalid logType parameter"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136003081
mngmtAgentTrap3083 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Log file is empty"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136003083
mngmtAgentTrap3084 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Storage System with this WWN is not visible to this agent or the WWN is invalid"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136003084
mngmtAgentTrap3086 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Parsefile for current firmware version not found. Upload correct parse file."
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136003086
mngmtAgentTrap3090 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"The contents of this file appear to be invalid"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136003090
mngmtAgentTrap3091 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"The MIB failed to build due to a missing parse file."
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136003091
mngmtAgentTrap3092 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"MLD description file is older than local file but system is downrev"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136003092
mngmtAgentTrap3094 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"System is initialized: can't get activeQ events"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136003094
mngmtAgentTrap3095 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Failed to write file - file could not be opened."
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136003095
mngmtAgentTrap4000 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"MLD Manager Subsystem Error"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136004000
mngmtAgentTrap4001 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"MLD Manager Offline"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136004001
mngmtAgentTrap4004 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"MLD Manager Startup Complete"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136004004
mngmtAgentTrap4005 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"MLD Manager Abnormal Startup"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136004005
mngmtAgentTrap4007 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"MLD Manager Shutdown Complete"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136004007
mngmtAgentTrap4011 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Invalid Host IP Address specified"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136004011
mngmtAgentTrap4012 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Unable to open the NsaMldMgr.dat file for Write"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136004012
mngmtAgentTrap4013 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Unable to open the NsaMldMgr.dat file for Read"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136004013
mngmtAgentTrap4014 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Agent Uid does not exist"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136004014
mngmtAgentTrap4015 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Unable to find object"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136004015
mngmtAgentTrap4016 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Unable to store object"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136004016
mngmtAgentTrap4017 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Unable to find storage system object"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136004017
mngmtAgentTrap4018 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Unable to create MLD"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136004018
mngmtAgentTrap4020 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"lastSafeChoiceDelay Expired"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136004020
mngmtAgentTrap4021 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"crashDetectDelay Expired"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136004021
mngmtAgentTrap4023 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Unable to read Copy1 of MLD"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136004023
mngmtAgentTrap4024 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Copy 1 of MLD Invalid"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136004024
mngmtAgentTrap4025 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Invalid Copy block of MLD"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136004025
mngmtAgentTrap4027 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"MLD database capacity not equal to true MLD capacity"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136004027
mngmtAgentTrap4028 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Backup range out of bounds of copy 1 range"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136004028
mngmtAgentTrap4029 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"MLD Manager Lock Crash DetectDelay has expired, just taking lock!"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136004029
mngmtAgentTrap4030 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"MLD Copy 1 Restored"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136004030
mngmtAgentTrap4031 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"MLD Copy 2 Restored"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136004031
mngmtAgentTrap4032 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Unable to find UidAssoc Object"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136004032
mngmtAgentTrap4033 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Unable to store UID Association Object"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136004033
mngmtAgentTrap4034 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Unable to find UidAssoc Object"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136004034
mngmtAgentTrap4035 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Unable to read last Fusion event read"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136004035
mngmtAgentTrap4036 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"MLD Notification Queue Empty"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136004036
mngmtAgentTrap4037 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Unable to find Notification Object"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136004037
mngmtAgentTrap4040 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Unable to read Event Log Pointer"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136004040
mngmtAgentTrap4041 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Unable to read Event Log"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136004041
mngmtAgentTrap4042 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Unable to store Event Log"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136004042
mngmtAgentTrap4043 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Unable to read Event Log"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136004043
mngmtAgentTrap4047 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Previously Read Object Properties do not Match"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136004047
mngmtAgentTrap4048 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Previously Read Object Properties do not Match"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136004048
mngmtAgentTrap4049 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Unable to read Notification Host List"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136004049
mngmtAgentTrap4050 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Unable to store Notification Host List"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136004050
mngmtAgentTrap4051 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Unable to store Notification Host List and free Lock"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136004051
mngmtAgentTrap4052 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Unable to read Event Configuration List"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136004052
mngmtAgentTrap4053 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Unable to store Event Configuration List"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136004053
mngmtAgentTrap4054 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Unable to store Event Configuration List and free Lock"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136004054
mngmtAgentTrap4058 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"MLD Manager Mutex Timeout error"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136004058
mngmtAgentTrap4059 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"MLD Manager list is empty"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136004059
mngmtAgentTrap5001 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Monitor Startup Complete"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136005001
mngmtAgentTrap5002 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Monitor Startup Failed"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136005002
mngmtAgentTrap5003 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Monitor ShutDown Complete"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136005003
mngmtAgentTrap5004 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Monitor Memory Allocation Failure"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY CRITICAL
--#TIMEINDEX 136
::= 136005004
mngmtAgentTrap5005 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Monitor Mark Agent as Inactive"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136005005
mngmtAgentTrap5006 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Monitor create thread error"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136005006
mngmtAgentTrap5007 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Monitor create timer error"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136005007
mngmtAgentTrap5008 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Monitor agent registration - Complete"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136005008
mngmtAgentTrap5010 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Monitor initiated a storage system management shutdown because of controller failures"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY MINOR
--#TIMEINDEX 136
::= 136005010
mngmtAgentTrap5011 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Unknown storage system rediscovery complete "
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136005011
mngmtAgentTrap5012 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Start monitoring thread for storage system - Complete"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136005012
mngmtAgentTrap5013 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Start monitoring thread for storage system - Fail"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136005013
mngmtAgentTrap5014 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Monitoring thread for storage system terminated"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136005014
mngmtAgentTrap5015 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Rediscover unknown storage system - Error"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136005015
mngmtAgentTrap5016 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Controller time synchronized to appliance time."
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136005016
mngmtAgentTrap5017 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Appliance and controller time checked for synchronization."
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136005017
mngmtAgentTrap5018 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Controller and appliance time are the same. No need to synchronize."
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136005018
mngmtAgentTrap5019 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Exception caught in monitoring process."
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136005019
mngmtAgentTrap6001 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Ready"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136006001
mngmtAgentTrap6002 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Index Out of Range"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136006002
mngmtAgentTrap6003 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Cannot access storage system. Communications error."
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY CRITICAL
--#TIMEINDEX 136
::= 136006003
mngmtAgentTrap6004 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"No controllers found"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136006004
mngmtAgentTrap6005 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Invalid Index"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136006005
mngmtAgentTrap6006 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Memory allocation failure"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY CRITICAL
--#TIMEINDEX 136
::= 136006006
mngmtAgentTrap6007 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"No physical stores found"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136006007
mngmtAgentTrap6008 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"No storage system found"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136006008
mngmtAgentTrap6009 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"No disk group found"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136006009
mngmtAgentTrap6010 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Too many disk groups"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136006010
mngmtAgentTrap6011 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"No volumes found"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136006011
mngmtAgentTrap6012 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"No Logical Disks Found"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136006012
mngmtAgentTrap6013 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Context ID changed during operation"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136006013
mngmtAgentTrap6014 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"No Name"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136006014
mngmtAgentTrap6015 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Name Size Exceeded"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136006015
mngmtAgentTrap6016 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Shutdown Complete"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136006016
mngmtAgentTrap6017 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Mutex Creation Failure"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136006017
mngmtAgentTrap6018 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"The command has timed out. Storage system is busy processing previous command."
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136006018
mngmtAgentTrap6019 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"No MLD Handle Set"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136006019
mngmtAgentTrap6020 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Failed Transport Layer Communication - No Such Id"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136006020
mngmtAgentTrap6021 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Failed Transport Layer Communication - TimeOut"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136006021
mngmtAgentTrap6022 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"No initialized storage system objects found"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136006022
mngmtAgentTrap6023 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"No Attached Port Found"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136006023
mngmtAgentTrap6024 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Failed to get SCMI Object Handle"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136006024
mngmtAgentTrap6025 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Shutdown Both Restart And Power Off Requested"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136006025
mngmtAgentTrap6026 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Shutdown Drive Shelf Power Off But No Enclosure Power Off Requested"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136006026
mngmtAgentTrap6027 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Shutdown Disable Battery But No Enclosure Power Off Requested"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136006027
mngmtAgentTrap6028 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Shutdown Disable Battery But Shutdown Unconditional Requested"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136006028
mngmtAgentTrap6029 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Shutdown Delay Out Of Range"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136006029
mngmtAgentTrap6030 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Cache Write Failure"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136006030
mngmtAgentTrap6031 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Battery Disable Failure"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136006031
mngmtAgentTrap6032 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Drive Shelf Disable Failure"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136006032
mngmtAgentTrap6033 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Battery Disable Failed on Both Controllers Batteries"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136006033
mngmtAgentTrap6034 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Battery Disable Failed on This Controllers Battery"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136006034
mngmtAgentTrap6035 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Battery Disable Failed on the Other Controllers Battery"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136006035
mngmtAgentTrap6036 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Requested disk failure protection level is set. Actual level will change when sufficient disk space is available."
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136006036
mngmtAgentTrap6037 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Physical Store Contains Stale or Foreign Volume Information."
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136006037
mngmtAgentTrap6038 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Controller Resynchronization or Reboot Occurred. Context Error"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY MINOR
--#TIMEINDEX 136
::= 136006038
mngmtAgentTrap8001 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Invalid Operation"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136008001
mngmtAgentTrap8002 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Storage system already created"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136008002
mngmtAgentTrap8003 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Controller already part of storage system configuration"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136008003
mngmtAgentTrap8004 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Physical Store Count Below Minimum"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136008004
mngmtAgentTrap8005 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Controller not part of storage system configuration"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136008005
mngmtAgentTrap8006 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Failed to uninitialize storage system"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136008006
mngmtAgentTrap8007 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Storage system File Open Error"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY MINOR
--#TIMEINDEX 136
::= 136008007
mngmtAgentTrap8008 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Storage system File Write Error"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY MINOR
--#TIMEINDEX 136
::= 136008008
mngmtAgentTrap8009 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Storage system File Read Error"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY MINOR
--#TIMEINDEX 136
::= 136008009
mngmtAgentTrap8010 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Name too long"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136008010
mngmtAgentTrap8011 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"No String Error"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136008011
mngmtAgentTrap8012 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"No MLD Handle Found"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136008012
mngmtAgentTrap8013 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"No Controllers Found"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136008013
mngmtAgentTrap8014 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Controller Not Found On Loop"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136008014
mngmtAgentTrap8015 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"No Disk Groups Found"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136008015
mngmtAgentTrap8016 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"No Volumes Found"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136008016
mngmtAgentTrap8017 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"No Physical Stores Found"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136008017
mngmtAgentTrap8018 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"No Vdisks Found"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136008018
mngmtAgentTrap8019 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"No Hosts Found"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136008019
mngmtAgentTrap8020 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Name already exists"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136008020
mngmtAgentTrap8021 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Folder is not empty"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136008021
mngmtAgentTrap8022 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Spares goal could not be met"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136008022
mngmtAgentTrap8023 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Storage system object found"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136008023
mngmtAgentTrap8024 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Storage system object not found"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136008024
mngmtAgentTrap8025 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"New Physical Store Detected But Not Found In Physical Store List"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136008025
mngmtAgentTrap8026 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"MldManager Handle is NULL"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY MINOR
--#TIMEINDEX 136
::= 136008026
mngmtAgentTrap8027 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"NscMngrInterface Handle is NULL"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY MINOR
--#TIMEINDEX 136
::= 136008027
mngmtAgentTrap8028 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"ScLockMngr Handle is NULL"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY MINOR
--#TIMEINDEX 136
::= 136008028
mngmtAgentTrap8029 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Storage system initialization failed"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY CRITICAL
--#TIMEINDEX 136
::= 136008029
mngmtAgentTrap8030 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"MldMngr, NscMngrInterfaceMngr, or ScLockMngr Handle is NULL"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY MINOR
--#TIMEINDEX 136
::= 136008030
mngmtAgentTrap8031 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Storage system initialization failed"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY CRITICAL
--#TIMEINDEX 136
::= 136008031
mngmtAgentTrap8032 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Storage system discovery failed"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY MINOR
--#TIMEINDEX 136
::= 136008032
mngmtAgentTrap8033 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Storage system already uninitialized or does not exist"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136008033
mngmtAgentTrap8034 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Get Total Storage Failed"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY MINOR
--#TIMEINDEX 136
::= 136008034
mngmtAgentTrap8035 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Storage system is uninitialized"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136008035
mngmtAgentTrap8036 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Get Total Storage Available Failed"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY MINOR
--#TIMEINDEX 136
::= 136008036
mngmtAgentTrap8037 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Get Total Storage Occupied Failed"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY MINOR
--#TIMEINDEX 136
::= 136008037
mngmtAgentTrap8038 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Get Total Storage Free Failed"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY MINOR
--#TIMEINDEX 136
::= 136008038
mngmtAgentTrap8039 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Get Disk Group Failed"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY MINOR
--#TIMEINDEX 136
::= 136008039
mngmtAgentTrap8040 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Get Disk Group List Failed"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY MINOR
--#TIMEINDEX 136
::= 136008040
mngmtAgentTrap8041 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Get Disk Group Count Failed"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY MINOR
--#TIMEINDEX 136
::= 136008041
mngmtAgentTrap8042 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Create Volume Failed"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY MINOR
--#TIMEINDEX 136
::= 136008042
mngmtAgentTrap8043 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Get Volume Failed"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY MINOR
--#TIMEINDEX 136
::= 136008043
mngmtAgentTrap8044 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Get Volumes Failed"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY MINOR
--#TIMEINDEX 136
::= 136008044
mngmtAgentTrap8045 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Get Volumes Count Failed"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY MINOR
--#TIMEINDEX 136
::= 136008045
mngmtAgentTrap8046 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Get Vdisk Failed"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY MINOR
--#TIMEINDEX 136
::= 136008046
mngmtAgentTrap8047 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Get Vdisk List Failed"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY MINOR
--#TIMEINDEX 136
::= 136008047
mngmtAgentTrap8048 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Get Physical Store Failed"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY MINOR
--#TIMEINDEX 136
::= 136008048
mngmtAgentTrap8049 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Get Physical Stores Failed"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY MINOR
--#TIMEINDEX 136
::= 136008049
mngmtAgentTrap8050 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Get Physical Stores Count Failed"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY MINOR
--#TIMEINDEX 136
::= 136008050
mngmtAgentTrap8051 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Create Vdisk Failed"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY MINOR
--#TIMEINDEX 136
::= 136008051
mngmtAgentTrap8052 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Delete Vdisk Failed"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY MINOR
--#TIMEINDEX 136
::= 136008052
mngmtAgentTrap8053 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Get Device Addition Policy Failed"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY MINOR
--#TIMEINDEX 136
::= 136008053
mngmtAgentTrap8054 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Get Spares Current Failed"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY MINOR
--#TIMEINDEX 136
::= 136008054
mngmtAgentTrap8055 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Get Spares Goal Failed"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY MINOR
--#TIMEINDEX 136
::= 136008055
mngmtAgentTrap8056 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Get storage system events failed"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY MINOR
--#TIMEINDEX 136
::= 136008056
mngmtAgentTrap8057 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Get Volume Replacement Delay Failed"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY MINOR
--#TIMEINDEX 136
::= 136008057
mngmtAgentTrap8058 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Set Device Addition Policy Failed"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY MINOR
--#TIMEINDEX 136
::= 136008058
mngmtAgentTrap8059 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Set Spares Goal Failed"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY MINOR
--#TIMEINDEX 136
::= 136008059
mngmtAgentTrap8060 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Set Volume Replacement Delay Failed"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY MINOR
--#TIMEINDEX 136
::= 136008060
mngmtAgentTrap8061 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Create controller Failed"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY MINOR
--#TIMEINDEX 136
::= 136008061
mngmtAgentTrap8062 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Update controller Failed"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY MINOR
--#TIMEINDEX 136
::= 136008062
mngmtAgentTrap8063 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Create Host Failed"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY MINOR
--#TIMEINDEX 136
::= 136008063
mngmtAgentTrap8064 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Discard Host Failed"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY MINOR
--#TIMEINDEX 136
::= 136008064
mngmtAgentTrap8065 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Get Host Failed"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY MINOR
--#TIMEINDEX 136
::= 136008065
mngmtAgentTrap8066 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Get Host List Failed"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY MINOR
--#TIMEINDEX 136
::= 136008066
mngmtAgentTrap8067 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Get Host Count Failed"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY MINOR
--#TIMEINDEX 136
::= 136008067
mngmtAgentTrap8068 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Get Presented Unit List Failed"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY MINOR
--#TIMEINDEX 136
::= 136008068
mngmtAgentTrap8069 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Get Presented Unit Count Failed"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY MINOR
--#TIMEINDEX 136
::= 136008069
mngmtAgentTrap8070 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Free View Failed"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY MINOR
--#TIMEINDEX 136
::= 136008070
mngmtAgentTrap8071 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Storage system shutdown Failed"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY MINOR
--#TIMEINDEX 136
::= 136008071
mngmtAgentTrap8073 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Get Derived Unit List Failed"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY MINOR
--#TIMEINDEX 136
::= 136008073
mngmtAgentTrap8074 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Get Derived Unit Count Failed"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY MINOR
--#TIMEINDEX 136
::= 136008074
mngmtAgentTrap8075 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Get Vdisk list failed"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY MINOR
--#TIMEINDEX 136
::= 136008075
mngmtAgentTrap8076 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Get Vdisk count failed"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY MINOR
--#TIMEINDEX 136
::= 136008076
mngmtAgentTrap8077 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Error while building Vdisk root view"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY MINOR
--#TIMEINDEX 136
::= 136008077
mngmtAgentTrap8078 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Error while building host root view"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY MINOR
--#TIMEINDEX 136
::= 136008078
mngmtAgentTrap8079 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Error while building disk group root view"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY MINOR
--#TIMEINDEX 136
::= 136008079
mngmtAgentTrap8080 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Error while building hardware root view"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY MINOR
--#TIMEINDEX 136
::= 136008080
mngmtAgentTrap8081 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Specified time format is incorrect"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY MINOR
--#TIMEINDEX 136
::= 136008081
mngmtAgentTrap8082 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Error creating/opening time synchronization file."
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY MINOR
--#TIMEINDEX 136
::= 136008082
mngmtAgentTrap8083 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"NSCList reordered."
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY MINOR
--#TIMEINDEX 136
::= 136008083
mngmtAgentTrap8084 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"NscList mutex Get error"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY MINOR
--#TIMEINDEX 136
::= 136008084
mngmtAgentTrap8085 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Storage System is managed by another agent"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136008085
mngmtAgentTrap8086 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Memory allocation failure"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136008086
mngmtAgentTrap8087 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Failed to obtain list of DR Groups"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136008087
mngmtAgentTrap8088 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Failed to obtain count of DR Groups"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136008088
mngmtAgentTrap8089 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Failed to build DR Group view"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136008089
mngmtAgentTrap8090 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"No Devices found on Controller Back End Loops"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY MINOR
--#TIMEINDEX 136
::= 136008090
mngmtAgentTrap9001 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Vdisk File Open Error"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY MINOR
--#TIMEINDEX 136
::= 136009001
mngmtAgentTrap9002 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Vdisk File Write Error"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY MINOR
--#TIMEINDEX 136
::= 136009002
mngmtAgentTrap9003 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Vdisk File Read Error"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY MINOR
--#TIMEINDEX 136
::= 136009003
mngmtAgentTrap9004 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Vdisk name too long"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136009004
mngmtAgentTrap9005 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Vdisk No String Error"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136009005
mngmtAgentTrap9006 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Vdisk No Object Error"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136009006
mngmtAgentTrap9007 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Vdisk still exists"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136009007
mngmtAgentTrap9008 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Vdisk Invalid Value"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136009008
mngmtAgentTrap9009 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"An outstanding command is still in progress for the Vdisk"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136009009
mngmtAgentTrap9010 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Requested Vdisk size exceeds the available size"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136009010
mngmtAgentTrap9011 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Vdisk size may be expanded but not reduced"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136009011
mngmtAgentTrap9012 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Operation on a fast Vdisk deletion completed"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136009012
mngmtAgentTrap9013 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Operation on a fast Vdisk creation completed"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136009013
mngmtAgentTrap9014 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Operation on a fast Vdisk size expansion completed"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136009014
mngmtAgentTrap9015 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Vdisk cache data lost error"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136009015
mngmtAgentTrap9016 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Vdisk data lost error resolved"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136009016
mngmtAgentTrap9017 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Operation rejected - The Vdisk has a sharing relationship with another object "
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136009017
mngmtAgentTrap9018 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Operation on this Vdisk was rejected due to its degraded condition"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136009018
mngmtAgentTrap9019 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Operation on this Vdisk can only be performed if it is presented to a host"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136009019
mngmtAgentTrap9020 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Cache policies cannot be modified if Vdisk is presented to a host"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136009020
mngmtAgentTrap9021 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Allowed property changes successful. (Cache policy changes not allowed while Vdisk is presented to a host.)"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136009021
mngmtAgentTrap9022 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Requested redundancy type cannot be implemented with the current disk group condition."
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136009022
mngmtAgentTrap9023 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Your Vdisk was created but cannot be presented at this time. It can be presented when it is fully allocated."
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136009023
mngmtAgentTrap9025 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Vdisk device data lost error"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136009025
mngmtAgentTrap9026 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"The most significant hex character in a World Wide LUN Name must be a 6."
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136009026
mngmtAgentTrap9027 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Virtual disk cache and inoperative data lost error"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136009027
mngmtAgentTrap9028 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Virtual disk inoperative data lost error"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136009028
mngmtAgentTrap9029 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Virtual disk condition failed because of an inoperative data lost error."
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136009029
mngmtAgentTrap9030 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Vdisk is a snapshot. The following properties cannot be changed: Preferred Path, Requested Size, Write-Back Cache Policy."
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136009030
mngmtAgentTrap9031 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"The World Wide LUN Name cannot be changed for a presented Vdisk Active member or snapshot."
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136009031
mngmtAgentTrap9032 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Unknown property, request rejected"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136009032
mngmtAgentTrap9033 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"This Vdisk was deleted as the indirect result of another user command."
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136009033
mngmtAgentTrap9034 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"The requested allocation policy cannot be satisfied. A different allocation policy is already in use by another snapshot in the same family."
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136009034
mngmtAgentTrap9035 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"The deletion of this Vdisk cannot take place. The original Vdisk that this is being snapcloned from is in a VRaid1 Meltdown state which must first be resolved."
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136009035
mngmtAgentTrap9036 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Synchronous creation of virtual disk has been aborted due to an internal error. Switching to asynchronous mode to complete the virtual disk creation."
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136009036
mngmtAgentTrap10001 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Storage Object Broker Ready"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136010001
mngmtAgentTrap10004 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Storage system is not initialized"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136010004
mngmtAgentTrap10006 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"SOB Memory Allocation Failure"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY CRITICAL
--#TIMEINDEX 136
::= 136010006
mngmtAgentTrap10010 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Your initialized system must have at least one disk group"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136010010
mngmtAgentTrap10011 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Cannot talk to all available controllers"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136010011
mngmtAgentTrap10012 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Command rejected - Folder is not empty"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136010012
mngmtAgentTrap10013 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Command rejected - Vdisk(s) or a data replication log are contained in this disk group"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136010013
mngmtAgentTrap10014 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Command rejected - Vdisk(s) are presented to this host"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136010014
mngmtAgentTrap10015 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Command rejected - This Vdisk has a sharing relationship with another object "
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136010015
mngmtAgentTrap10017 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Command rejected - Number of disk groups will exceed the maximum allowable number "
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136010017
mngmtAgentTrap10018 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Cannot access the password file "
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136010018
mngmtAgentTrap10019 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Enterprise Login - Complete"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136010019
mngmtAgentTrap10020 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Command rejected - Disks in the group would go below the minimum required number."
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136010020
mngmtAgentTrap10021 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Rediscovery of controllers - Complete"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136010021
mngmtAgentTrap10022 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Unable to establish communication with controller, check all connections. "
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136010022
mngmtAgentTrap10023 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Disk Group Data Lost Error Resolution Sequence 3 - Disk group resolved to normal"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136010023
mngmtAgentTrap10024 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Disk Group Data Lost Error Resolution Sequence 1 - Failed Vdisks marked for deletion"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136010024
mngmtAgentTrap10025 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Disk Group Data Lost Error Resolution Sequence 2 - Failed Vdisks deleted"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136010025
mngmtAgentTrap10026 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Disk Group Data Lost Error Resolution Sequence 3 - Disk group deleted"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136010026
mngmtAgentTrap10027 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Creating the Vdisk would exceed the maximum allowable Vdisk count"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136010027
mngmtAgentTrap10028 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Volume insufficient resources"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136010028
mngmtAgentTrap10029 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Process mutex is locked"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136010029
mngmtAgentTrap10030 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Invalid URL request type"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136010030
mngmtAgentTrap10031 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Invalid URL object type"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136010031
mngmtAgentTrap10035 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"The snapshot/Snapclone license cannot be validated. Either the license key has not been entered, or there is a system communication failure."
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136010035
mngmtAgentTrap10036 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"A data replication license cannot be validated. Either the license key has not been entered, or there is a system communication failure."
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136010036
mngmtAgentTrap10037 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Object name should not be empty or exceed its maximum length"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136010037
mngmtAgentTrap10038 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Object comments exceeds maximum length"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136010038
mngmtAgentTrap10039 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Vdisk does not meet the requirements to be part of a DR group."
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136010039
mngmtAgentTrap10040 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"The Eva selected as the Destination for the DR group is invalid. Either it has a DR relationship with another EVA or it is not the same EVA that the source EVA presently has a DR relationship with."
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136010040
mngmtAgentTrap10041 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Cannot group the specified disk device because the disk is already in a disk group."
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136010041
mngmtAgentTrap10042 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Cannot ungroup the specified disk device because the disk is not grouped."
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136010042
mngmtAgentTrap10043 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Object ID provided, or object type, is invalid for the requested operation."
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136010043
mngmtAgentTrap10044 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Specified remote disk group does not exist."
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136010044
mngmtAgentTrap11001 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Agent startup complete"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136011001
mngmtAgentTrap11002 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Agent shutdown complete"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136011002
mngmtAgentTrap11003 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Insufficient memory to create a new object, Heap may be full!"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY CRITICAL
--#TIMEINDEX 136
::= 136011003
mngmtAgentTrap11004 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Agent Startup Failed"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY CRITICAL
--#TIMEINDEX 136
::= 136011004
mngmtAgentTrap12001 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Nsc Manager Interface No controllers Found"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136012001
mngmtAgentTrap12002 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Nsc Manager Interface Index Out Of Range"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136012002
mngmtAgentTrap12003 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Unable to process command at this time. Retry the command or check all connections. "
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136012003
mngmtAgentTrap12004 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Nsc Manager Interface Initialization Complete"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136012004
mngmtAgentTrap12005 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Nsc Manager Interface Initialization Failed"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136012005
mngmtAgentTrap12008 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"No Disk Groups Available For Access"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136012008
mngmtAgentTrap13002 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Notification Mngr Online"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136013002
mngmtAgentTrap13003 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Notification Mngr Offline"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136013003
mngmtAgentTrap13004 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"NM Startup Complete"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136013004
mngmtAgentTrap13007 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Notification Failed"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY CRITICAL
--#TIMEINDEX 136
::= 136013007
mngmtAgentTrap13009 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Notification Failed - Network Error"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY CRITICAL
--#TIMEINDEX 136
::= 136013009
mngmtAgentTrap13012 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"NM Prev Failed Notification Successfully Notified"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136013012
mngmtAgentTrap13015 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"NM SNMP Packet Failed"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY CRITICAL
--#TIMEINDEX 136
::= 136013015
mngmtAgentTrap13017 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"NM Memory Allocation Error"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY CRITICAL
--#TIMEINDEX 136
::= 136013017
mngmtAgentTrap13018 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"NM StorageCell handle is NULL"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY CRITICAL
--#TIMEINDEX 136
::= 136013018
mngmtAgentTrap13019 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"NM User defined event state file is empty"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136013019
mngmtAgentTrap13020 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"NM Notification Failed - Notification Matrix is NULL "
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY MINOR
--#TIMEINDEX 136
::= 136013020
mngmtAgentTrap14001 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"View Already Exists"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136014001
mngmtAgentTrap14002 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"View Is Not Set"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136014002
mngmtAgentTrap14003 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"No View Object(s) Found"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136014003
mngmtAgentTrap14004 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"View Index Is Out Of Range"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136014004
mngmtAgentTrap14005 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"View Object - Invalid Object Condition"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136014005
mngmtAgentTrap14006 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"View Object - Invalid Object Type"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136014006
mngmtAgentTrap14007 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"View List Pointer is NULL"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY MINOR
--#TIMEINDEX 136
::= 136014007
mngmtAgentTrap14008 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"View Object Pointer is NULL"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY MINOR
--#TIMEINDEX 136
::= 136014008
mngmtAgentTrap14009 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Building View List Object - Complete"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136014009
mngmtAgentTrap14010 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Building View List Object - Failed"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136014010
mngmtAgentTrap14012 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"View Find by UID Failed"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136014012
mngmtAgentTrap14013 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"View Find by Type Failed"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136014013
mngmtAgentTrap14017 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"View Find by Type by Name Failed"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136014017
mngmtAgentTrap15001 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Tree View Symbol Not Found"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136015001
mngmtAgentTrap15002 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Tree View Id Symbol Not Found"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136015002
mngmtAgentTrap15003 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Tree Cursor Symbol Not Found"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136015003
mngmtAgentTrap15004 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Tree Cursor Id Symbol Not Found"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136015004
mngmtAgentTrap15005 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Tree Sibling Symbol Not Found"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136015005
mngmtAgentTrap15006 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Tree Total Children Symbol Not Found"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136015006
mngmtAgentTrap15007 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Tree Expansion Symbol Not Found"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136015007
mngmtAgentTrap15008 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Tree Contraction Symbol Not Found"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136015008
mngmtAgentTrap15009 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Tree Invalid Descriptor String"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136015009
mngmtAgentTrap16001 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Ema Short Status - Reissue Command"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136016001
mngmtAgentTrap16004 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Ema Invalid Handle Set In Request Packet"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136016004
mngmtAgentTrap16005 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Ema No Pstore At Referenced Location"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136016005
mngmtAgentTrap16008 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Ema No Device Found"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136016008
mngmtAgentTrap16010 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Ema Could Not Find SubEnclosure in Configuration List"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136016010
mngmtAgentTrap16012 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Ema Non-specific error occurred "
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136016012
mngmtAgentTrap16013 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Ema Shelf WWN Could Not Be Accessed Through A Drive"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136016013
mngmtAgentTrap16014 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Ema EMU Failed To Enter Primary Mode"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136016014
mngmtAgentTrap16015 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Ema EMU Failed To Exit Primary Mode"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136016015
mngmtAgentTrap16016 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Ema Downloaded File Does Not Contain Valid Fibre Channel Loader [status:1]"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136016016
mngmtAgentTrap16017 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Ema Downloaded File Format Is Not Recognized [status:2]"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136016017
mngmtAgentTrap16018 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Ema Incorrect Firmware In Downloaded File [status:3]"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136016018
mngmtAgentTrap16019 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Ema Downloaded Loader is Too Large [status:4]"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136016019
mngmtAgentTrap16020 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Ema Invalid Checksum [status:5]"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136016020
mngmtAgentTrap16021 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Ema Previous Offset Plus Previous Length Not Equal To Current Offset [status:6]"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136016021
mngmtAgentTrap16022 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Ema Downloaded Loader Terminated Incorrectly [status:7]"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136016022
mngmtAgentTrap16023 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Ema EMU Out Of Memory [status:8]"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136016023
mngmtAgentTrap16024 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Ema EMU CDB Timeout -- Download Aborted [status:9]"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136016024
mngmtAgentTrap16025 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Ema EMU Internal State Machine Error [status:10]"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136016025
mngmtAgentTrap16026 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Ema EMU Flash Erasure Failure [status:11]"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136016026
mngmtAgentTrap16027 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Ema EMU In Primary Mode - Cannot Download To Primary EMU [status:12]"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136016027
mngmtAgentTrap16028 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Ema Previous Offset Plus Previous Length Greater Than Total Size [status:13]"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136016028
mngmtAgentTrap16029 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Ema Current Total Size Different From Previous Total Size [status:14]"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136016029
mngmtAgentTrap16030 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Ema Could Not Restore Reporting Group Number. Final Download Record Error"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136016030
mngmtAgentTrap16031 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Ema Could Not Recovery From Invop. Invop Retries Exhausted"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136016031
mngmtAgentTrap16032 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Ema Requested WWN Does Not Match Enclosure WWN"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136016032
mngmtAgentTrap16033 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Ema EMU Enclosure Services Error Occurred. EMU May Be Unavailable or Not Installed"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY CRITICAL
--#TIMEINDEX 136
::= 136016033
mngmtAgentTrap16034 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Ema SCSI Error Occurred While Trying To Communicate With EMU"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136016034
mngmtAgentTrap16035 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Ema Could Not Open EMU Firmware File"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136016035
mngmtAgentTrap16036 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Ema EMU Firmware File Name Is Null"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136016036
mngmtAgentTrap16037 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Ema EMU Firmware Download Retries Exhausted. Manual Download May Be Required"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136016037
mngmtAgentTrap16038 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Ema EMU Current Firmware Version Matches Upgrade Firmware Version. No Upgrade Will Be Performed."
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136016038
mngmtAgentTrap16039 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Ema EMU Firmware Upgrade Success"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136016039
mngmtAgentTrap16040 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Ema EMU In Load State. Do Not Power Off. Reload EMU Firmware "
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136016040
mngmtAgentTrap17001 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Drive Code Load Descriptor File Open Error"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136017001
mngmtAgentTrap17002 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Drive Code Load Descriptor File Parsing Error - Invalid Line"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136017002
mngmtAgentTrap17003 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Drive Code Load Image File Open Error, "
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136017003
mngmtAgentTrap17004 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Drive Code Load Image File Error Getting File Size"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136017004
mngmtAgentTrap17005 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Drive Code Load Image File Buffer Allocation Error"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136017005
mngmtAgentTrap17006 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Drive Code Load Image File Read Error"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136017006
mngmtAgentTrap17007 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Drive Code Load Drive Firmware Update Failed "
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY CRITICAL
--#TIMEINDEX 136
::= 136017007
mngmtAgentTrap17008 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Drive Code Load Drive Inquiry Failed"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY MINOR
--#TIMEINDEX 136
::= 136017008
mngmtAgentTrap17009 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Drive Code Load Format Command Failed"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY MINOR
--#TIMEINDEX 136
::= 136017009
mngmtAgentTrap17012 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Drive Code Load Get Physical Store Condition Failed"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136017012
mngmtAgentTrap17013 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Drive Code Load Get Volume Condition Failed"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136017013
mngmtAgentTrap17014 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Drive Code Load Drive Spin Up Error"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY MINOR
--#TIMEINDEX 136
::= 136017014
mngmtAgentTrap17015 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Drive Code Load - Complete"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136017015
mngmtAgentTrap17016 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Drive Code Load Disk Group Migration In Progress"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136017016
mngmtAgentTrap17017 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Drive Code Load Unable To Code Load Disks Part Of A Group "
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136017017
mngmtAgentTrap18001 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Api Created Element Success"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136018001
mngmtAgentTrap18002 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Api Created Storage Success"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136018002
mngmtAgentTrap18003 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Api Created Storage Client Success"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136018003
mngmtAgentTrap18004 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Api Set Storage Success"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136018004
mngmtAgentTrap18005 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Api Set Element Success"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136018005
mngmtAgentTrap18006 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Api Deleted Element Success"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136018006
mngmtAgentTrap18007 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Api Deleted Storage Success"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136018007
mngmtAgentTrap18008 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Api Deleted Storage Client Success"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136018008
mngmtAgentTrap18009 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Api Created Snapshot Success "
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136018009
mngmtAgentTrap18010 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Api Created Clone Success"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136018010
mngmtAgentTrap18018 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Api Unable To Get The Lock"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136018018
mngmtAgentTrap18019 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Api Created PresentedUnit Success"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136018019
mngmtAgentTrap18022 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Api Create DiskGroup Success"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136018022
mngmtAgentTrap18024 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Api Create Folder Success"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136018024
mngmtAgentTrap18025 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Api Delete Folder Success"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136018025
mngmtAgentTrap18028 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Api Set Folder Success"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136018028
mngmtAgentTrap18034 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Api Invalid User Name Or Password Error"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136018034
mngmtAgentTrap18036 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Api Delete Presented Unit Success"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136018036
mngmtAgentTrap18038 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Api Set Diskgroup Success "
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136018038
mngmtAgentTrap18039 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Api Set Disk Success"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136018039
mngmtAgentTrap18040 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Api Delete Storage Family Success "
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136018040
mngmtAgentTrap18041 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Api Set Storage Family Success"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136018041
mngmtAgentTrap18042 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Api Control Memory Allocation Failure"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136018042
mngmtAgentTrap18045 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Api Element Codeload Success "
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136018045
mngmtAgentTrap18047 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Api Disk Codeload Success"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136018047
mngmtAgentTrap18048 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Api Monitor Codeload Success"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136018048
mngmtAgentTrap18049 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Api Added Port WWID Success"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136018049
mngmtAgentTrap18050 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Api Set Storage Client Success"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136018050
mngmtAgentTrap18051 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Api Invalid Operation"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136018051
mngmtAgentTrap18052 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Api Deleted Port WWID Success"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136018052
mngmtAgentTrap18059 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Api Set Power Success"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136018059
mngmtAgentTrap18060 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Api Element Is Not Initialized"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136018060
mngmtAgentTrap18063 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Api Error trying to delete a disk group"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136018063
mngmtAgentTrap18065 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Api A storage (Vdisk) operation is in progress. Try again later."
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136018065
mngmtAgentTrap18066 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Api The storage (Vdisk) condition is invalid. The storage may be in error. Try again later."
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136018066
mngmtAgentTrap18067 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Api Error calling get Vdisk condition. Vdisk may be deleted. Try again later."
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136018067
mngmtAgentTrap18068 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Api Invalid initialization of the API. Cannot start monitoring process. Storage system management limited."
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136018068
mngmtAgentTrap18070 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Api A command is currently under execution from another API call. Try again later."
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136018070
mngmtAgentTrap18071 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Api The server has not completed initialization, cannot process the request."
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136018071
mngmtAgentTrap18073 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Api Removal of disk from disk group successful"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136018073
mngmtAgentTrap18074 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Api Disk(s) added to disk group successfully"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136018074
mngmtAgentTrap18075 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Api Modify monitor properties successful"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136018075
mngmtAgentTrap18076 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Api Element name too long. Maximum is 20 characters."
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136018076
mngmtAgentTrap18080 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Api The snapshot/Snapclone license cannot be validated. Either the license key has not been entered, or there is a system communication failure."
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136018080
mngmtAgentTrap18081 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Api The folder operation is not valid for the specified folder. Either the folder is a root folder and cannot be modified, or it is a disk group folder for which you should use 'Set Group' command."
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136018081
mngmtAgentTrap20001 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"LicMngr Memory Allocation Failure"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY CRITICAL
--#TIMEINDEX 136
::= 136020001
mngmtAgentTrap20002 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"LicMngr Startup Complete"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136020002
mngmtAgentTrap20003 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"LicMngr Startup Failed"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY CRITICAL
--#TIMEINDEX 136
::= 136020003
mngmtAgentTrap20004 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"License successfully checked out"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136020004
mngmtAgentTrap20005 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"License checkout failed"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY MINOR
--#TIMEINDEX 136
::= 136020005
mngmtAgentTrap20011 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"License Line has an incorrect format"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY MINOR
--#TIMEINDEX 136
::= 136020011
mngmtAgentTrap20013 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"License Library runtime error"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY CRITICAL
--#TIMEINDEX 136
::= 136020013
mngmtAgentTrap20015 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Failed to retrieve Node WWN from storage system"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY MINOR
--#TIMEINDEX 136
::= 136020015
mngmtAgentTrap20016 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Failed to retrieve license list from MLD"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY MINOR
--#TIMEINDEX 136
::= 136020016
mngmtAgentTrap20017 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Failed to write license list to MLD"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY MINOR
--#TIMEINDEX 136
::= 136020017
mngmtAgentTrap20018 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"This license line appears to be invalid"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY MINOR
--#TIMEINDEX 136
::= 136020018
mngmtAgentTrap20019 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"MLD Manager Handle is NULL - unable to update MLD License List"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY MINOR
--#TIMEINDEX 136
::= 136020019
mngmtAgentTrap20020 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"LicMngr: Storage system handle is NULL"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY CRITICAL
--#TIMEINDEX 136
::= 136020020
mngmtAgentTrap20021 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"The license you entered is a valid license but not for the Node WWN and/or firmware version on this controller pair"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136020021
mngmtAgentTrap20022 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Function name string is null or in an incorrect format"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136020022
mngmtAgentTrap20023 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Version string is null or in an incorrect format"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136020023
mngmtAgentTrap21001 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"HSV Upgrade Manager Image File Open Error"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136021001
mngmtAgentTrap21002 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"HSV Upgrade Manager Image File Buffer Allocation Error"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136021002
mngmtAgentTrap21003 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"HSV Upgrade Manager Image File Read Error"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136021003
mngmtAgentTrap21004 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"HSV Upgrade Manager Event File Write Error"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136021004
mngmtAgentTrap21006 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"HSV Upgrade Manager Global Header Edc Compute Error"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136021006
mngmtAgentTrap21007 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"HSV Upgrade Manager Image Header Edc Compute Error"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136021007
mngmtAgentTrap21008 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"HSV Upgrade Manager Image Type Exceeds Max Image Count"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136021008
mngmtAgentTrap21009 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"HSV Upgrade Manager Image Type Not Controller Image"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136021009
mngmtAgentTrap21010 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"HSV Upgrade Manager Image Size Exceeded"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136021010
mngmtAgentTrap21011 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"HSV Upgrade Manager Event File Open Error"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136021011
mngmtAgentTrap21012 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"HSV Upgrade Manager Image Edc Compute Error"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136021012
mngmtAgentTrap21013 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"HSV Upgrade Manager Begin Text Not Found"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136021013
mngmtAgentTrap21014 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"HSV Upgrade Manager After Text Not Found"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136021014
mngmtAgentTrap21015 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"HSV Upgrade Manager File Format Version Mismatch"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136021015
mngmtAgentTrap21016 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"HSV Upgrade Manager Global Header Format Version Mismatch"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136021016
mngmtAgentTrap21017 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"HSV Upgrade Manager Product Information Was Not Found"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136021017
mngmtAgentTrap21018 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"HSV Upgrade Manager Event File Was Not Found"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136021018
mngmtAgentTrap21019 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"HSV Upgrade Manager All Images Match Versions Already Loaded"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136021019
mngmtAgentTrap22001 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Trace: Unable to write management agent trace file"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY MINOR
--#TIMEINDEX 136
::= 136022001
mngmtAgentTrap22002 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Trace: file write succeeded"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136022002
mngmtAgentTrap23002 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Diagnostic The view list has errors"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY MINOR
--#TIMEINDEX 136
::= 136023002
mngmtAgentTrap23003 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Diagnostic Memory allocation failure"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY CRITICAL
--#TIMEINDEX 136
::= 136023003
mngmtAgentTrap24001 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Windows system error"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136024001
mngmtAgentTrap24002 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Lock is already taken"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136024002
mngmtAgentTrap24003 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Lock is not taken"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136024003
mngmtAgentTrap24004 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Request timed out"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136024004
mngmtAgentTrap25001 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"No path to controller"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136025001
mngmtAgentTrap25002 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Thread is not running"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136025002
mngmtAgentTrap25003 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"No physical stores"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136025003
mngmtAgentTrap25004 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Loop context ID changed"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136025004
mngmtAgentTrap25005 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Storage Cell context ID changed"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136025005
mngmtAgentTrap25006 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Cache Write Failure"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136025006
mngmtAgentTrap25007 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Battery Disable Failure"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136025007
mngmtAgentTrap25008 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Drive Shelf Disable Failure"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136025008
mngmtAgentTrap25009 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Shutdown Both Restart And Power Off Requested"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136025009
mngmtAgentTrap25010 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Shutdown Drive Shelf Power Off But No Enclosure Power Off Requested"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136025010
mngmtAgentTrap25011 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Shutdown Disable Battery But No Enclosure Power Off Requested"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136025011
mngmtAgentTrap25012 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Shutdown Disable Battery But Shutdown Unconditional Requested"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136025012
mngmtAgentTrap25013 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Shutdown Delay Out Of Range"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136025013
mngmtAgentTrap25014 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Invalid Storage Cell name"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136025014
mngmtAgentTrap25015 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Requested spares goal cannot be satisfied"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136025015
mngmtAgentTrap25016 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"No valid LDAD found"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136025016
mngmtAgentTrap25017 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Mismatched MLD size"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136025017
mngmtAgentTrap25018 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Codeload image file error"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136025018
mngmtAgentTrap25019 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Storage System is not initialized"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136025019
mngmtAgentTrap26002 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Invalid data replication operation"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136026002
mngmtAgentTrap26005 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"DR group name exceeds maximum length"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136026005
mngmtAgentTrap26006 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"DR group created successfully"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136026006
mngmtAgentTrap26007 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Data replication invalid mode for DR Group create "
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136026007
mngmtAgentTrap26008 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"A duplicate DR group name exists in the specified source or destination DR group."
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136026008
mngmtAgentTrap26009 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Data replication invalid operation while DR Groups exist"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136026009
mngmtAgentTrap26010 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Data replication root folder does not exist"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136026010
mngmtAgentTrap26011 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"DR group discarded"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136026011
mngmtAgentTrap26012 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Data replication unknown remote storage system"
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136026012
mngmtAgentTrap26013 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Data replication Error. A conflicting Vdisk name exists on the remote storage system."
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136026013
mngmtAgentTrap26014 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Data Replication Error. Invalid Remote Vdisk Name specified."
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136026014
mngmtAgentTrap26015 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Data Replication Error. Remote Vdisk size cannot be modified."
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136026015
mngmtAgentTrap26016 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"Data Replication Error. Remote Vdisk should be unpresented to proceed with the discard/detach operation."
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136026016
mngmtAgentTrap27001 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"The element manager has successfully initialized storage system. Command issued through XML Interface."
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136027001
mngmtAgentTrap27002 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"The element manager has successfully created a virtual disk. Command issued through the XML Interface."
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136027002
mngmtAgentTrap27003 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"The element manager has successfully created a disk group. Command issued through the XML Interface."
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136027003
mngmtAgentTrap27004 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"The element manager has successfully created a DRM group. Command issued through the XML Interface."
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136027004
mngmtAgentTrap27005 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"The element manager has successfully created a host. Command issued through the XML Interface."
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136027005
mngmtAgentTrap27006 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"The element manager has successfully created a presented unit. Command issued through the XML Interface."
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136027006
mngmtAgentTrap27007 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"The element manager has successfully created a virtual disk folder. Command issued through the XML Interface."
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136027007
mngmtAgentTrap27008 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"The element manager has successfully created a host folder. Command issued through the XML Interface."
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136027008
mngmtAgentTrap27009 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"The element manager has successfully created a disk group folder. Command issued through the XML Interface."
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136027009
mngmtAgentTrap27010 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"The element manager has successfully created a DRM group folder. Command issued through the XML Interface."
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136027010
mngmtAgentTrap27011 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"The element manager has successfully created a folder. Command issued through the XML Interface."
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136027011
mngmtAgentTrap27012 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"The element manager has successfully created a snapshot. Command issued through the XML Interface."
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136027012
mngmtAgentTrap27013 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"The element manager has successfully created a snapclone. Command issued through the XML Interface."
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136027013
mngmtAgentTrap27014 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"The element manager has successfully uninitialized the storage system. Command issued through the XML Interface."
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136027014
mngmtAgentTrap27015 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"The element manager has successfully deleted a virtual disk. Command issued through the XML Interface."
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136027015
mngmtAgentTrap27016 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"The element manager has successfully deleted a disk group. Command issued through the XML Interface."
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136027016
mngmtAgentTrap27017 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"The element manager has successfully deleted a DRM group. Command issued through the XML Interface."
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136027017
mngmtAgentTrap27018 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"The element manager has successfully deleted a host. Command issued through the XML Interface."
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136027018
mngmtAgentTrap27019 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"The element manager has successfully deleted a presented unit. Command issued through the XML Interface."
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136027019
mngmtAgentTrap27020 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"The element manager has successfully deleted a virtual disk folder. Command issued through the XML Interface."
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136027020
mngmtAgentTrap27021 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"The element manager has successfully deleted a host folder. Command issued through the XML Interface."
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136027021
mngmtAgentTrap27022 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"The element manager has successfully deleted a disk group folder. Command issued through the XML Interface."
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136027022
mngmtAgentTrap27023 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"The element manager has successfully deleted a DRM group folder. Command issued through the XML Interface."
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136027023
mngmtAgentTrap27024 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"The element manager has successfully deleted a folder. Command issued through the XML Interface."
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136027024
mngmtAgentTrap27025 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"The element manager has successfully deleted a snapshot. Command issued through the XML Interface."
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136027025
mngmtAgentTrap27026 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"The element manager has successfully modified the properties of a storage system. Command issued through the XML Interface."
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136027026
mngmtAgentTrap27027 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"The element manager has successfully modified the properties of a virtual disk. Command issued through the XML Interface."
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136027027
mngmtAgentTrap27028 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"The element manager has successfully modified the properties of a disk group. Command issued through the XML Interface."
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136027028
mngmtAgentTrap27029 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"The element manager has successfully modified the properties of a DRM group. Command issued through the XML Interface."
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136027029
mngmtAgentTrap27030 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"The element manager has successfully modified the properties of a host. Command issued through the XML Interface."
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136027030
mngmtAgentTrap27031 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"The element manager has successfully modified the properties of a presented unit. Command issued through the XML Interface."
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136027031
mngmtAgentTrap27032 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"The element manager has successfully modified the properties of a virtual disk folder. Command issued through the XML Interface."
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136027032
mngmtAgentTrap27033 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"The element manager has successfully modified the properties of a host folder. Command issued through the XML Interface."
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136027033
mngmtAgentTrap27034 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"The element manager has successfully modified the properties of a hardware root folder. Command issued through the XML Interface."
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136027034
mngmtAgentTrap27035 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"The element manager has successfully modified the properties of a disk group folder. Command issued through the XML Interface."
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136027035
mngmtAgentTrap27036 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"The element manager has successfully modified the properties of a DRM group folder. Command issued through the XML Interface."
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136027036
mngmtAgentTrap27037 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"The element manager has successfully modified the properties of a DRM group root folder. Command issued through the XML Interface."
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136027037
mngmtAgentTrap27038 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"The element manager has successfully modified the properties of a folder. Command issued through the XML Interface."
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136027038
mngmtAgentTrap27039 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"The element manager has successfully modified the properties of a snapshot. Command issued through the XML Interface."
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136027039
mngmtAgentTrap27040 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"The element manager has successfully modified the properties of a disk. Command issued through the XML Interface."
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136027040
mngmtAgentTrap27041 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"The element manager has successfully modified the properties of a disk shelf. Command issued through the XML Interface."
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136027041
mngmtAgentTrap27042 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"The element manager has successfully modified the properties of a controller. Command issued through the XML Interface."
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136027042
mngmtAgentTrap27043 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"The element manager has successfully modified the properties of a controller shelf. Command issued through the XML Interface."
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136027043
mngmtAgentTrap27044 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"The element manager has successfully modified the properties of a cabinet. Command issued through the XML Interface."
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136027044
mngmtAgentTrap27045 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"The element manager has successfully reserved an object. Command issued through the XML Interface."
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136027045
mngmtAgentTrap27046 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"The element manager has successfully released an object. Command issued through the XML Interface."
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136027046
mngmtAgentTrap27047 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"XML cache mutex timeout."
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136027047
mngmtAgentTrap27048 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"XML cache memory allocation error."
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136027048
mngmtAgentTrap27049 TRAP-TYPE
ENTERPRISE compaq
VARIABLES { hostName,
scellNameDateTime,
agentEventCode,
agentEventDescription }
DESCRIPTION
"XML subsystem unknown error."
--#TYPE "Management Agent Event"
--#SUMMARY "Host %s : SCellName-TimeDate %s : EventCode %d : Description %s"
--#ARGUMENTS {0,1,2,3,}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 136
::= 136027049
END