All MIBs › CPQHSV110V3-MIB › sCellEventTrap31
sCellEventTrap31
Module: CPQHSV110V3-MIB
OID (symbolic): CPQHSV110V3-MIB::sCellEventTrap31
OID (numeric): 1.3.6.1.4.1.232.0.13600769
Node type: NOTIFICATION-TYPE
Description: Severity: Critical -- failure or failure imminent. The physical disk drive identified by the device field has been rendered inoperable.
- If the flags.quorumDisk flag is nonzero, the physical disk drive is the Storage System Quorum disk identified in the quorumSequence field.
- If the flags.inqState flag is nonzero, the content of the inqData and capacity fields is valid.
- If the rssFlags.memberAbnormal flag is nonzero, the content of the memberState field is valid.
The reasonCode field contains a code giving the reason the physical disk drive has been rendered inoperable:
- 0x001 = CS IO failure
- 0x002 = Scrubber IO failure
- 0x003 = Attempt to set CBIT on normal drive
- 0x004 = Attempt to set CBIT on merging drive
- 0x100 = The Target Discovery Service Descriptor retry count has been exceeded
- 0x101 = Inoperable for Bad Block Replacement
- 0x102 = The soft error count has been exceeded
- 0x103 = The number of exchange timeouts permitted was exceeded
- 0x104 = Communication with drive has failed an excessive number of times
- 0x105 = The number of retries has been exceeded
- 0x106 = Medium/Hardware Errors encountered on this physical disk drive
- 0x107 = The number of Directed LIP's has surpassed the threshold
- 0x200 = Smart event from a physical disk drive not in Storage System
- 0x201 = Smart event from a physical disk drive not a Volume
- 0x202 = Smart event from a physical disk drive not a RSS
- 0x203 = Failure predicted from physical disk drive
- 0x204 = Can't read from physical disk drive from the poll
- 0x205 = Failure predicted from physical disk drive while deleting Disk Group
- 0x206 = physical disk drive forced inoperative from maintenance command for temporary POID
- 0x207 = physical disk drive forced inoperative from maintenance command for POID
- 0x208 = Bad block recovery failed or can't read FPAB
- 0x209 = Failure to remove volume from Storage System
- 0x20A = Failure to update metadata
Examples
Send this trap to an SNMP manager — replace <manager> with the IP or hostname of your monitoring server (SNMPv2c):
snmptrap -v2c -c public <manager> '' CPQHSV110V3-MIB::sCellEventTrap31 snmptrap -v2c -c public <manager> '' 1.3.6.1.4.1.232.0.13600769
Listen for incoming traps on the manager host (-f keeps it in the foreground, -Lo prints to stdout — useful for testing):
snmptrapd -f -Lo -c /dev/null authCommunity log public
Example snmptrapd log entry:
zoo11-linux.zoo [UDP: [192.168.30.111]:58169->[192.168.30.10]:162]: DISMAN-EVENT-MIB::sysUpTimeInstance = Timeticks: (219396921) 25 days, 9:26:09.21 SNMPv2-MIB::snmpTrapOID.0 = OID: CPQHSV110V3-MIB::sCellEventTrap31
Start monitoring HP StorageWorks HSV110 (EVA) array controller with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CPQHSV110V3-MIB::sCellEventTrap31 OID value, configure state conditions and alerts, and monitor any HP StorageWorks HSV110 (EVA) array controller from a single console.
OID Breakdown
Upper-level ancestors (7 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.232 | compaq | COMPAQ-ID-REC-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.232.0.13600769 | sCellEventTrap31 | CPQHSV110V3-MIB |