All MIBs › CONFIG-MIB › hpSwitchPortLACPKey
hpSwitchPortLACPKey
Module: CONFIG-MIB
OID (symbolic): CONFIG-MIB::hpSwitchPortLACPKey
OID (numeric): 1.3.6.1.4.1.11.2.14.11.5.1.7.1.3.1.1.17
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description:
This is the key associated with the port. The user can configure this key to control the dynamic link aggregation. The ports with the same key can be aggregated in the single trunk. The key can also be configured with dot3adAggPortActorAdminKey mib but it will be created only when the LACP is enabled on the port.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.11.2.14.11.5.1.7.1.3.1.1.17 snmpwalk -v2c -c public <target> CONFIG-MIB::hpSwitchPortLACPKey
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.11.2.14.11.5.1.7.1.3.1.1.17.1 snmpget -v2c -c public <target> CONFIG-MIB::hpSwitchPortLACPKey.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.11.2.14.11.5.1.7.1.3.1.1.17.1 i <value>
OID Breakdown
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | BIANCA-BRICK-PPP-MIB |
| 1.3.6 | dod | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1 | internet | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4 | private | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4.1 | enterprises | ANIROOT-MIB |
| 1.3.6.1.4.1.11 | hp | DATAPROTECTOR-MIB |
| 1.3.6.1.4.1.11.2 | nm | DATAPROTECTOR-MIB |
| 1.3.6.1.4.1.11.2.14 | icf | HP-ICF |
| 1.3.6.1.4.1.11.2.14.11 | hpicfObjects | HP-ICF |
| 1.3.6.1.4.1.11.2.14.11.5 | hpicfSwitch | HP-ICF-OID |
| 1.3.6.1.4.1.11.2.14.11.5.1 | hpSwitch | HP-ICF-OID |
| 1.3.6.1.4.1.11.2.14.11.5.1.7 | hpConfig | CONFIG-MIB |
| 1.3.6.1.4.1.11.2.14.11.5.1.7.1 | hpSwitchConfig | CONFIG-MIB |
| 1.3.6.1.4.1.11.2.14.11.5.1.7.1.3 | hpSwitchPortConfig | CONFIG-MIB |
| 1.3.6.1.4.1.11.2.14.11.5.1.7.1.3.1 | hpSwitchPortTable | CONFIG-MIB |
| 1.3.6.1.4.1.11.2.14.11.5.1.7.1.3.1.1 | hpSwitchPortEntry | CONFIG-MIB |
| 1.3.6.1.4.1.11.2.14.11.5.1.7.1.3.1.1.17 | hpSwitchPortLACPKey | CONFIG-MIB |