All MIBs › CONFIG-MIB › hpSwitchDSCPRateLimitPorts
hpSwitchDSCPRateLimitPorts
Module: CONFIG-MIB
OID (symbolic): CONFIG-MIB::hpSwitchDSCPRateLimitPorts
OID (numeric): 1.3.6.1.4.1.11.2.14.11.5.1.7.1.31.1.1.3
Node type: OBJECT-TYPE
Type: PortList
Access: read-write
Description:
The applied ports for a row of the DSCP rate limit table. The rate limit from the hpSwitchDSCPRateLimitKbps column of the row will be applied on the logical ports specified. A rate limit may not be applied to individual ports that are members of a trunk, but must be applied to the entire trunk instead. It is an error to apply a DSCP rate limit to any ports before setting hpSwitchDSCPRateLimitKbps to a value other than -1. When the port list for a row is cleared, the hpSwitchDSCPRateLimitKbps column is set to the default of -1.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.11.2.14.11.5.1.7.1.31.1.1.3 snmpwalk -v2c -c public <target> CONFIG-MIB::hpSwitchDSCPRateLimitPorts
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.11.2.14.11.5.1.7.1.31.1.1.3.1 snmpget -v2c -c public <target> CONFIG-MIB::hpSwitchDSCPRateLimitPorts.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.11.2.14.11.5.1.7.1.31.1.1.3.1 s <value>
OID Breakdown
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | BIANCA-BRICK-PPP-MIB |
| 1.3.6 | dod | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1 | internet | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4 | private | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4.1 | enterprises | ANIROOT-MIB |
| 1.3.6.1.4.1.11 | hp | DATAPROTECTOR-MIB |
| 1.3.6.1.4.1.11.2 | nm | DATAPROTECTOR-MIB |
| 1.3.6.1.4.1.11.2.14 | icf | HP-ICF |
| 1.3.6.1.4.1.11.2.14.11 | hpicfObjects | HP-ICF |
| 1.3.6.1.4.1.11.2.14.11.5 | hpicfSwitch | HP-ICF-OID |
| 1.3.6.1.4.1.11.2.14.11.5.1 | hpSwitch | HP-ICF-OID |
| 1.3.6.1.4.1.11.2.14.11.5.1.7 | hpConfig | CONFIG-MIB |
| 1.3.6.1.4.1.11.2.14.11.5.1.7.1 | hpSwitchConfig | CONFIG-MIB |
| 1.3.6.1.4.1.11.2.14.11.5.1.7.1.31 | hpSwitchDSCPRateLimitConfig | CONFIG-MIB |
| 1.3.6.1.4.1.11.2.14.11.5.1.7.1.31.1 | hpSwitchDSCPRateLimitConfigTable | CONFIG-MIB |
| 1.3.6.1.4.1.11.2.14.11.5.1.7.1.31.1.1 | hpSwitchDSCPRateLimitConfigEntry | CONFIG-MIB |
| 1.3.6.1.4.1.11.2.14.11.5.1.7.1.31.1.1.3 | hpSwitchDSCPRateLimitPorts | CONFIG-MIB |