All MIBs › CONFIG-MIB › hpSwitchAllowV2Modules
hpSwitchAllowV2Modules
Module: CONFIG-MIB
OID (symbolic): CONFIG-MIB::hpSwitchAllowV2Modules
OID (numeric): 1.3.6.1.4.1.11.2.14.11.5.1.7.1.1.15
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description:
This object enables or disables V2 interface module support. When enabled, the ports of V2 modules operate normally and any V3 modules in the system operate in V2-compatibility mode. When disabled, V3 modules have full functionality and any V2 modules in the system are completely disabled. Changing the value of this object results in an immediate reboot of the system to apply the new mode. The special value 'erase' enables V2 module support such as 'enable', but also erases the switch configuration. It can be used to clear all configuration settings when changing the mode from 'disable' to 'enable'. Normally, V2 module support cannot be enabled if there are any configuration settings that are specific to V3 modules. This object returns a value of 'enable' after being set to 'erase' and reboots the device.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.11.2.14.11.5.1.7.1.1.15 snmpwalk -v2c -c public <target> CONFIG-MIB::hpSwitchAllowV2Modules
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.11.2.14.11.5.1.7.1.1.15.1 snmpget -v2c -c public <target> CONFIG-MIB::hpSwitchAllowV2Modules.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.11.2.14.11.5.1.7.1.1.15.1 i <value>
OID Breakdown
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | BIANCA-BRICK-PPP-MIB |
| 1.3.6 | dod | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1 | internet | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4 | private | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4.1 | enterprises | ANIROOT-MIB |
| 1.3.6.1.4.1.11 | hp | DATAPROTECTOR-MIB |
| 1.3.6.1.4.1.11.2 | nm | DATAPROTECTOR-MIB |
| 1.3.6.1.4.1.11.2.14 | icf | HP-ICF |
| 1.3.6.1.4.1.11.2.14.11 | hpicfObjects | HP-ICF |
| 1.3.6.1.4.1.11.2.14.11.5 | hpicfSwitch | HP-ICF-OID |
| 1.3.6.1.4.1.11.2.14.11.5.1 | hpSwitch | HP-ICF-OID |
| 1.3.6.1.4.1.11.2.14.11.5.1.7 | hpConfig | CONFIG-MIB |
| 1.3.6.1.4.1.11.2.14.11.5.1.7.1 | hpSwitchConfig | CONFIG-MIB |
| 1.3.6.1.4.1.11.2.14.11.5.1.7.1.1 | hpSwitchSystemConfig | CONFIG-MIB |
| 1.3.6.1.4.1.11.2.14.11.5.1.7.1.1.15 | hpSwitchAllowV2Modules | CONFIG-MIB |