All MIBs › COM21-HCXOC3-MIB
Organization: Com21, Inc.
Last Updated: 1997-01-08
Category: DOCSIS and Cable
Description: Manages OC-3 ATM uplink interface parameters on COM21 HCX cable concentrator systems.
Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.
What Is COM21-HCXOC3-MIB?
COM21-HCXOC3-MIB is a vendor-specific SNMP module from COM21 (part number 005-0025-00) for the OC-3 ATM uplink card in the ComController HCX broadband cable concentrator platform, a DOCSIS-era cable headend system. As an interface-level MIB it is expected to expose configuration and status data for the OC-3 ATM uplink, such as line status, cell counts, and alarm/error indicators typical of SONET/ATM interface MIBs. Its monitoring role is centered on hardware/link status: tracking whether the OC-3 physical uplink is up, detecting loss-of-signal or framing errors, and watching ATM cell-level statistics that indicate uplink health for the cable headend. It likely depends on or parallels standard ATM/SONET interface MIBs (e.g. atmMIB, sonetMIB) given the OC-3/ATM subject matter, layered under the vendor's proprietary tree. The COM21-HCXOC3-MIB MIB is typically deployed in legacy cable-modem headend environments where the HCX concentrator aggregates subscriber traffic onto an OC-3 ATM backbone uplink.
IPNetwork Monitor allows you to monitor SNMP objects defined in COM21-HCXOC3-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.
Supported Devices
- COM21 ComController HCX cable concentrator (OC-3 ATM uplink card)
Monitoring Examples
No sample runtime objects were available for this module in the supplied source excerpt, so specific object names cannot be grounded here; in practice an administrator managing this uplink card would expect to poll OC-3 line status and ATM cell error/alarm counters analogous to standard ATM interface MIB objects to detect a failed or degraded uplink between the HCX concentrator and the ATM backbone.
What Can Be Monitored
- OC-3 uplink line status
- ATM cell error/alarm counts
- uplink alarm indicators
This MIB depends on
Related MIBs
Imported Objects
From COM21-HCX-MIB
| com21 | OBJECT-IDENTITY |
| com21Hcx | OBJECT-IDENTITY |
| com21Traps | OBJECT-IDENTITY |
From COM21-HCXALM-MIB
| hcxAlmSeverity | OBJECT-TYPE |
| hcxEventLogTime | OBJECT-TYPE |
From SNMPv2-SMI
| Gauge32 | |
| Integer32 | |
| IpAddress | |
| MODULE-IDENTITY | |
| NOTIFICATION-TYPE | |
| OBJECT-TYPE | |
| TimeTicks |
From SNMPv2-TC
| DisplayString | |
| MacAddress |
OIDs
| OID symbolic | OID numeric | Type | Access | Description |
|---|---|---|---|---|
| com21HcxOc3 | 1.3.6.1.4.1.1141.2.90 | This is the Com21 ComController Oc3 MIB module. COM21 Part# 005-0025-00 | ||
| com21HcxOc3PortEntry | 1.3.6.1.4.1.1141.2.92.1.1 | not-accessible | . | |
| com21HcxOc3PortGroup | 1.3.6.1.4.1.1141.2.92 | |||
| com21HcxOc3PortTable | 1.3.6.1.4.1.1141.2.92.1 | not-accessible | . | |
| com21HcxOc3StatsEntry | 1.3.6.1.4.1.1141.2.94.1.1 | not-accessible | . | |
| com21HcxOc3StatsGroup | 1.3.6.1.4.1.1141.2.94 | |||
| com21HcxOc3StatsTable | 1.3.6.1.4.1.1141.2.94.1 | not-accessible | . | |
| com21HcxOc3UnitEntry | 1.3.6.1.4.1.1141.2.91.1.1 | not-accessible | . | |
| com21HcxOc3UnitGroup | 1.3.6.1.4.1.1141.2.91 | |||
| com21HcxOc3UnitTable | 1.3.6.1.4.1.1141.2.91.1 | not-accessible | . | |
| com21HcxOc3VccEntry | 1.3.6.1.4.1.1141.2.93.1.1 | not-accessible | . | |
| com21HcxOc3VccGroup | 1.3.6.1.4.1.1141.2.93 | |||
| com21HcxOc3VccTable | 1.3.6.1.4.1.1141.2.93.1 | not-accessible | . | |
| I32 hcxOc3AgeTime | 1.3.6.1.4.1.1141.2.92.1.1.12 | Integer32 | read-write | This attribute defines, in seconds, the aging time for non-accessed entries in the Bridge mapping table. The default shall be 300secs. If this set to 0, then aging is disabled. |
| I32 hcxOc3AggrActDnStrmCbrRate | 1.3.6.1.4.1.1141.2.92.1.1.18 | Integer32 | read-only | This attribute specifies the aggregate of all ComPort downstream CBR rates active on the Oc3 port (VLAN). This includes only acquired ComPorts. Defined in Kbps. |
| I32 hcxOc3AggrActDnStrmPcrRate | 1.3.6.1.4.1.1141.2.92.1.1.19 | Integer32 | read-only | This attribute specifies the aggregate of all ComPort downstream PCR rates active on the Oc3 port (VLAN). This includes only acquired ComPorts. Defined in Kbps. |
| I32 hcxOc3AggrActUpStrmCbrRate | 1.3.6.1.4.1.1141.2.92.1.1.20 | Integer32 | read-only | This attribute specifies the aggregate of all ComPort upstream CBR rates active on the Oc3 port (VLAN). This includes only acquired ComPorts. Defined in bits per second. |
| I32 hcxOc3AggrActUpStrmMaxRate | 1.3.6.1.4.1.1141.2.92.1.1.22 | Integer32 | read-only | This attribute specifies the aggregate of all ComPort upstream maximum cell rates active on the Oc3 port (VLAN). This includes only acquired ComPorts. Defined in Kbps. |
| I32 hcxOc3AggrActUpStrmMinRate | 1.3.6.1.4.1.1141.2.92.1.1.21 | Integer32 | read-only | This attribute specifies the aggregate of all ComPort upstream minimum PCR rates active on the Oc3 port (VLAN). This includes only acquired ComPorts. Defined in Kbps. |
| I32 hcxOc3AggrDnStrmCbrRate | 1.3.6.1.4.1.1141.2.92.1.1.7 | Integer32 | read-only | This attribute specifies the aggregate of all ComPort downstream CBR rates configured on the Oc3 port This includes both acquired and unacquired ComPorts. Defined in Kbps. |
| I32 hcxOc3AggrDnStrmPcrRate | 1.3.6.1.4.1.1141.2.92.1.1.8 | Integer32 | read-only | This attribute specifies the aggregate of all ComPort downstream PCR rates configured on the Oc3 port This includes both acquired and unacquired ComPorts. Defined in Kbps. |
| I32 hcxOc3AggrUpStrmCbrRate | 1.3.6.1.4.1.1141.2.92.1.1.9 | Integer32 | read-only | This attribute specifies the aggregate of all ComPort upstream CBR rates configured on the Oc3 port This includes both acquired and unacquired ComPorts. Defined in Kbps. |
| I32 hcxOc3AggrUpStrmMaxRate | 1.3.6.1.4.1.1141.2.92.1.1.11 | Integer32 | read-only | This attribute specifies the aggregate of all ComPort upstream maximum cell rates on the Oc3 port This includes both acquired and unacquired ComPorts. Defined in Kbps. |
| I32 hcxOc3AggrUpStrmMinRate | 1.3.6.1.4.1.1141.2.92.1.1.10 | Integer32 | read-only | This attribute specifies the aggregate of all ComPort upstream minimum PCR rates on the Oc3 port This includes both acquired and unacquired ComPorts. Defined in Kbps. |
| STR hcxOc3BootVersion | 1.3.6.1.4.1.1141.2.91.1.1.4 | DisplayString | read-only | contains the version of the Oc3 card boot ROM. Will contain empty string if card has not been inserted in the slot. |
| INT hcxOc3FaultStatusLed | 1.3.6.1.4.1.1141.2.91.1.1.9 | INTEGER | read-only | The Oc3 Fault Status LED is a read-only attribute which describes the condition of the Oc3 Fault Status light emitting diode located on the Oc3 board. A value of on(1) indicates that an fault condition has been detected (for which a trap will have been issued) and the LED is illuminated. Will be off if no card present. |
| NTF hcxOc3FaultStatusLedChange | 1.3.6.1.4.1.1141.4.153 | generated whenever there is a change in the Fault LED status. This an event with no clear condition. Only severity is WARNING. | ||
| STR hcxOc3HardwareVersion | 1.3.6.1.4.1.1141.2.91.1.1.3 | DisplayString | read-only | contains the hardware version of the Oc3 card. Will contain empty string if card has not been inserted in the slot. |
| INT hcxOc3MaxBandwidth | 1.3.6.1.4.1.1141.2.92.1.1.6 | INTEGER | read-write | This attribute defines the maximum output payload bandwidth associated with the Oc3 port. Defined in thousands of bps. From 0 to 22222. This value shall be checked by the CC which shall ensure that the aggregate of the hcxOc3MaxBandwidth and hcxEtherMaxBandwidth attributes for each of the Oc3 and Ethernet ports does not exceed the system maximum. If Voice Channels are configured on this Port, and if Voice channels are active, Ondemand Data bandwidth will get squeezed if Voice Channels are active. Default: 7000 |
| NTF hcxOc3OperationFailure | 1.3.6.1.4.1.1141.4.157 | This notification is generated by the CC whenever an Oc3 port fails to respond correctly to a request. This failure could indicate either a resource problem or software failure. Note that if an Oc3 card failures to respond completely to a CC request, then a hcxInsertChange trap shall be generated. This is an event without a corresponding clear. Only severity allowed is WARNING. | ||
| INT hcxOc3Port1483EncapEnbl | 1.3.6.1.4.1.1141.2.92.1.1.26 | INTEGER | read-write | This attribute is used to Enable/Disable 1483 Encapsulation on the Oc3Port. If enabled, then all Ethernet packets received by the Oc3Port should be 1483 Encapsulated and all Ethernet packets transmitted by the Oc3Port will be 1483 Encapsulated. Default: enable. |
| I32 hcxOc3PortAggrActVoiceRate | 1.3.6.1.4.1.1141.2.92.1.1.33 | Integer32 | read-only | This attribute specifies the aggregate Rate of all Voice Channels Active on this Port. A voice channel is considered Active on this Port if: a ComPort is configured with Voice Channel and the ComPort is configured on a Vlan which is on this Port and the Comport is acquired and the Comport has a Voice Channel Active. The rate specified here is the same in both Upstream and Downstream Direction. Defined in Kbps. |
| I32 hcxOc3PortAggrVoiceRate | 1.3.6.1.4.1.1141.2.92.1.1.32 | Integer32 | read-only | This attribute specifies the aggregate Rate of all Voice Channels configured on this Port. A voice channel is considered configured on this Port if: a ComPort is configured with Voice Channel and the ComPort is configured on a Vlan which is on this Port. The rate specified here includes both acquired and unacquired ComPorts and is the same in both Upstream and Downstream Direction. Defined in Kbps. |
| INT hcxOc3PortConfigState | 1.3.6.1.4.1.1141.2.92.1.1.13 | INTEGER | read-write | The Oc3 Port State is an active-value. The Oc3 port will default to offline, in which case no traffic shall be passed. Default offline. |
| INT hcxOc3PortDiagTestAction | 1.3.6.1.4.1.1141.2.92.1.1.15 | INTEGER | read-write | This attribute is used to invoke the internal Oc3 card diagnostic test. In order to activate this test, the card must be placed in the test state. |
| NTF hcxOc3PortDiagTestComplete | 1.3.6.1.4.1.1141.4.156 | This notification is generated whenever the Oc3 port internal diagnostic tests are completed. Event only, no clear. Only severity allowed is WARNING. | ||
| INT hcxOc3PortDiagTestResult | 1.3.6.1.4.1.1141.2.92.1.1.16 | INTEGER | read-only | This attribute contains the result of the last Oc3 port diagnostic test. |
| INT hcxOc3PortId | 1.3.6.1.4.1.1141.2.92.1.1.3 | INTEGER | read-only | contains port Id Oc3 port. |
| IP hcxOc3PortIpAddr | 1.3.6.1.4.1.1141.2.92.1.1.23 | IpAddress | read-write | IP Address associated with this ethernet port. This is a future item for telephone return support. |
| IP hcxOc3PortIpMask | 1.3.6.1.4.1.1141.2.92.1.1.24 | IpAddress | read-write | IP mask associated with port. Default is ff.ff.ff.ff. This is a future item for telephone return support. |
| INT hcxOc3PortLineAIS | 1.3.6.1.4.1.1141.2.92.1.1.29 | INTEGER | read-only | This attribute indicates whether Line Alarm Indication Signal is detected by the OC3 Port Default: off. |
| NTF hcxOc3PortLineAISClear | 1.3.6.1.4.1.1141.4.164 | generated whenever AIS is cleared at the OC3 Port. Alarm Severity: CLEAR | ||
| NTF hcxOc3PortLineAISDetected | 1.3.6.1.4.1.1141.4.163 | generated whenever AIS is detected at the OC3 Port. Alarm Severity: MAJOR | ||
| INT hcxOc3PortLineRDI | 1.3.6.1.4.1.1141.2.92.1.1.30 | INTEGER | read-only | This attribute indicates whether Line Remote Defect Indication is detected by the OC3 Port Default: off. |
| NTF hcxOc3PortLineRDIClear | 1.3.6.1.4.1.1141.4.166 | generated whenever Line Remote Defect Indication is cleared at the OC3 Port. Alarm Severity: CLEAR | ||
| NTF hcxOc3PortLineRDIDetected | 1.3.6.1.4.1.1141.4.165 | generated whenever Line Remote Defect Indication is detected at the OC3 Port. Alarm Severity: MAJOR | ||
| INT hcxOc3PortLOFLed | 1.3.6.1.4.1.1141.2.92.1.1.34 | INTEGER | read-only | The OC3 Loss Of Frame LED indicates whether a Loss of Frame is present on the WAN side of the OC3 port. |
| NTF hcxOc3PortLOFLedChange | 1.3.6.1.4.1.1141.4.169 | generated whenever there is a change in the LOF LED status. This an event with no clear condition. Only severity is WARNING. | ||
| INT hcxOc3PortLOSLed | 1.3.6.1.4.1.1141.2.92.1.1.17 | INTEGER | read-only | The OC3 Loss Of Signal LED indicates whether a Loss of Signal is present on the WAN side of the OC3 port. |
| NTF hcxOc3PortLOSLedChange | 1.3.6.1.4.1.1141.4.158 | generated whenever there is a change in the LOS LED status. This an event with no clear condition. Only severity is WARNING. | ||
| MAC hcxOc3PortMacAddr | 1.3.6.1.4.1.1141.2.92.1.1.25 | MacAddress | read-only | MAC address associated with port. |
| INT hcxOc3PortPathRDI | 1.3.6.1.4.1.1141.2.92.1.1.31 | INTEGER | read-only | This attribute indicates whether Path Remote Defect Indication is detected by the OC3 Port Default: off. |
| NTF hcxOc3PortPathRDIClear | 1.3.6.1.4.1.1141.4.168 | generated whenever Path Remote Defect Indication is cleared at the OC3 Port. Alarm Severity: CLEAR | ||
| NTF hcxOc3PortPathRDIDetected | 1.3.6.1.4.1.1141.4.167 | generated whenever Path Remote Defect Indication is detected at the OC3 Port. Alarm Severity: MAJOR | ||
| PRI hcxOc3PortPrimServState | 1.3.6.1.4.1.1141.2.92.1.1.4 | PrimServiceState | read-only | contains primary service state of the Oc3 Unit. This state shall be effected by the hcxOc3PortState attribute. |
| NTF hcxOc3PortPrimStateChange | 1.3.6.1.4.1.1141.4.154 | This trap is generated whenever a change in the the hcxOc3PortPrimServState occurs. This an event with no clear condition. Only severity is WARNING. | ||
| INT hcxOc3PortRestartAction | 1.3.6.1.4.1.1141.2.92.1.1.14 | INTEGER | read-write | The Oc3 Port Restart Action is an active-value. The setting of this attribute to restart(2) causes the Oc3 port to reset and download a new image. |
| STR hcxOc3PortSecServState | 1.3.6.1.4.1.1141.2.92.1.1.5 | DisplayString | read-only | contains a string defining the secondary service states of the Oc3 Unit. The substrings supported by the Oc3 Unit shall be: MT - offline, set by hcxOc3, FAULT - hardware failure, TEST - test, UNEQ - unequipped. |
| NTF hcxOc3PortSecStateChange | 1.3.6.1.4.1.1141.4.155 | This trap is generated whenever a change in the the hcxOc3PortSecServState occurs. This an event with no clear condition. Only severity is WARNING. | ||
| INT hcxOc3PortSectionLOF | 1.3.6.1.4.1.1141.2.92.1.1.28 | INTEGER | read-only | This attribute indicates whether Section Loss of Frame is present at the OC3 Port. Default: off. |
| NTF hcxOc3PortSectionLOFClear | 1.3.6.1.4.1.1141.4.162 | generated whenever Loss of Frame is cleared at the OC3 Port. Alarm Severity: CLEAR | ||
| NTF hcxOc3PortSectionLOFDetected | 1.3.6.1.4.1.1141.4.161 | generated whenever Loss of Frame is detected at the OC3 Port. Alarm Severity: MAJOR | ||
| INT hcxOc3PortSectionLOS | 1.3.6.1.4.1.1141.2.92.1.1.27 | INTEGER | read-only | This attribute indicates whether Section Loss of Signal is present at the OC3 Port. Default: off. |
| NTF hcxOc3PortSectionLOSClear | 1.3.6.1.4.1.1141.4.160 | generated whenever Loss of Signal is Cleared at the OC3 Port. Alarm Severity: CLEAR | ||
| NTF hcxOc3PortSectionLOSDetected | 1.3.6.1.4.1.1141.4.159 | generated whenever Loss of Signal is detected at the OC3 Port. Alarm Severity: MAJOR | ||
| INT hcxOc3PortShelfId | 1.3.6.1.4.1.1141.2.92.1.1.1 | INTEGER | read-only | contains shelf in which this Oc3 port is located. |
| I32 hcxOc3PortSlotId | 1.3.6.1.4.1.1141.2.92.1.1.2 | Integer32 | read-only | contains slot in which this Oc3 port is located. |
| INT hcxOc3RestartAction | 1.3.6.1.4.1.1141.2.91.1.1.7 | INTEGER | read-write | The Oc3 Unit Restart Action is an active-value. The setting of this attribute to restart(2) causes the Oc3 card to reset and download a new image. |
| STR hcxOc3SerialNumber | 1.3.6.1.4.1.1141.2.91.1.1.10 | DisplayString | read-only | contains the serial number of the Oc3 card. Will contain empty string if card has not been inserted in the slot. |
| INT hcxOc3StatsClear | 1.3.6.1.4.1.1141.2.94.1.1.14 | INTEGER | read-write | This attribute is used to clear the all OC3 Stats statistics counters in this group. This operation is only possible if the hcxStatsControl attribute is set to wrapCurr. |
| I32 hcxOc3StatsCurrLineBIPErr | 1.3.6.1.4.1.1141.2.94.1.1.5 | Integer32 | read-only | This attributes displays the number of Line Byte Interleaved Parity Errors reported by the OC3 Port in the current 15-minute period. |
| I32 hcxOc3StatsCurrLineFEndBlockErr | 1.3.6.1.4.1.1141.2.94.1.1.7 | Integer32 | read-only | This attributes displays the number of Far End Line Block Errors reported by the OC3 Port in the current 15-minute period. |
| I32 hcxOc3StatsCurrPathBIPErr | 1.3.6.1.4.1.1141.2.94.1.1.6 | Integer32 | read-only | This attributes displays the number of Path Byte Interleaved Parity Errors reported by the OC3 Port in the current 15-minute period. |
| I32 hcxOc3StatsCurrPathFEndBlockErr | 1.3.6.1.4.1.1141.2.94.1.1.8 | Integer32 | read-only | This attributes displays the number of Far End Path Block Errors reported by the OC3 Port in the current 15-minute period. |
| I32 hcxOc3StatsCurrSectionBIPErr | 1.3.6.1.4.1.1141.2.94.1.1.4 | Integer32 | read-only | This attributes displays the number of Section Byte Interleaved Parity Errors reported by the OC3 Port in the current 15-minute period. |
| I32 hcxOc3StatsPortId | 1.3.6.1.4.1.1141.2.94.1.1.3 | Integer32 | read-only | Specifies the Port where this Entry exists. |
| I32 hcxOc3StatsPrevLineBIPErr | 1.3.6.1.4.1.1141.2.94.1.1.10 | Integer32 | read-only | This attributes displays the number of Line Byte Interleaved Parity Errors reported by the OC3 Port in the current 15-minute period. |
| I32 hcxOc3StatsPrevLineFEndBlockErr | 1.3.6.1.4.1.1141.2.94.1.1.12 | Integer32 | read-only | This attributes displays the number of Far End Line Block Errors reported by the OC3 Port in the current 15-minute period. |
| I32 hcxOc3StatsPrevPathBIPErr | 1.3.6.1.4.1.1141.2.94.1.1.11 | Integer32 | read-only | This attributes displays the number of Path Byte Interleaved Parity Errors reported by the OC3 Port in the current 15-minute period. |
| I32 hcxOc3StatsPrevPathFEndBlockErr | 1.3.6.1.4.1.1141.2.94.1.1.13 | Integer32 | read-only | This attributes displays the number of Far End Path Block Errors reported by the OC3 Port in the current 15-minute period. |
| I32 hcxOc3StatsPrevSectionBIPErr | 1.3.6.1.4.1.1141.2.94.1.1.9 | Integer32 | read-only | This attributes displays the number of Section Byte Interleaved Parity Errors reported by the OC3 Port in the current 15-minute period. |
| I32 hcxOc3StatsShelfId | 1.3.6.1.4.1.1141.2.94.1.1.1 | Integer32 | read-only | Specifies the Shelf where this Entry exists. |
| I32 hcxOc3StatsSlotId | 1.3.6.1.4.1.1141.2.94.1.1.2 | Integer32 | read-only | Specifies the Slot where this Entry exists. |
| INT hcxOc3SyncClkConfigure | 1.3.6.1.4.1.1141.2.91.1.1.11 | INTEGER | read-write | This attribute allows to configure the Oc3 card as the primary or secondary source for network clock. This attribute is valid only if networkClk is selected in hcxSyncClkConfigure attribute. Only 1 Oc3 Card can be configured as the priSrc and 1 Oc3 Card can be configured as secSrc in the HCX system Default: disable |
| INT hcxOc3TestStatusLed | 1.3.6.1.4.1.1141.2.91.1.1.8 | INTEGER | read-only | The Oc3 Test Status LED is a read-only attribute which describes the condition of the Oc3 Test Status light emitting diode located on the Oc3 board. A value of on(1) indicates that a service effecting test is in progress and that the LED is illuminated. Will be off if no card present. |
| NTF hcxOc3TestStatusLedChange | 1.3.6.1.4.1.1141.4.152 | generated whenever there is a change in test LED status. This an event with no clear condition. Only severity is WARNING. | ||
| PRI hcxOc3UnitPrimServState | 1.3.6.1.4.1.1141.2.91.1.1.5 | PrimServiceState | read-only | contains primary service state of the Oc3 Unit. |
| NTF hcxOc3UnitPrimStateChange | 1.3.6.1.4.1.1141.4.150 | This trap is generated whenever a change in the the hcxOc3UnitPrimServState occurs. This an event with no clear condition. Only severity is WARNING. | ||
| STR hcxOc3UnitSecServState | 1.3.6.1.4.1.1141.2.91.1.1.6 | DisplayString | read-only | contains a string defining the secondary service states of the Oc3 Unit. The substrings supported by the Oc3 Unit shall be: UNEQ - unequipped. |
| NTF hcxOc3UnitSecStateChange | 1.3.6.1.4.1.1141.4.151 | This trap is generated whenever a change in the the hcxOc3UnitSecServState occurs. This an event with no clear condition. Only severity is WARNING. | ||
| INT hcxOc3UnitShelfId | 1.3.6.1.4.1.1141.2.91.1.1.1 | INTEGER | read-only | contains the associated shelf id. |
| I32 hcxOc3UnitSlotId | 1.3.6.1.4.1.1141.2.91.1.1.2 | Integer32 | read-only | contains associated slot id. |
| I32 hcxOc3VccPortId | 1.3.6.1.4.1.1141.2.93.1.1.3 | Integer32 | read-only | Specifies the Port where this Entry exists. |
| I32 hcxOc3VccShelfId | 1.3.6.1.4.1.1141.2.93.1.1.1 | Integer32 | read-only | Specifies the Shelf where this Entry exists. |
| I32 hcxOc3VccSlotId | 1.3.6.1.4.1.1141.2.93.1.1.2 | Integer32 | read-only | Specifies the Slot where this Entry exists. |
| INT hcxOc3VccType | 1.3.6.1.4.1.1141.2.93.1.1.6 | INTEGER | read-only | Specifies whether this VCC is used to transport data or voice. |
| I32 hcxOc3VccVci | 1.3.6.1.4.1.1141.2.93.1.1.5 | Integer32 | read-only | Specifies the Vci where this Entry exists. |
| I32 hcxOc3VccVpi | 1.3.6.1.4.1.1141.2.93.1.1.4 | Integer32 | read-only | Specifies the Vpi where this Entry exists. |
RFC description
Com21 vendor MIB for managing high-capacity OC-3 optical interfaces on cable modem and broadband access equipment.
Start monitoring Com21 ComController HCX OC-3 ATM uplink card (legacy) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.