COM21-HCXOC3-MIB :: hcxOc3PortAggrVoiceRate

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsCOM21-HCXOC3-MIBhcxOc3PortAggrVoiceRate

hcxOc3PortAggrVoiceRate

Module: COM21-HCXOC3-MIB

OID (symbolic): COM21-HCXOC3-MIB::hcxOc3PortAggrVoiceRate

OID (numeric): 1.3.6.1.4.1.1141.2.92.1.1.32

Node type: OBJECT-TYPE

Type: Integer32

Access: read-only

Description: This attribute specifies the aggregate Rate of all Voice Channels configured on this Port. A voice channel is considered configured on this Port if: a ComPort is configured with Voice Channel and the ComPort is configured on a Vlan which is on this Port. The rate specified here includes both acquired and unacquired ComPorts and is the same in both Upstream and Downstream Direction. Defined in Kbps.

What is hcxOc3PortAggrVoiceRate?

This read-only Integer32, expressed in Kbps, reports the aggregate rate of all voice channels configured on this OC-3 port, counting a channel as configured whenever a ComPort with a voice channel is assigned to a VLAN riding this port, regardless of whether that ComPort has actually acquired service, and the rate applies identically to both upstream and downstream. It gives an administrator the total provisioned voice-service capacity demand on this optical trunk. For example, an operator planning to add more voice subscribers behind this OC-3 uplink would check this configured aggregate against the trunk's overall bandwidth budget.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.1141.2.92.1.1.32
snmpwalk -v2c -c public <target> COM21-HCXOC3-MIB::hcxOc3PortAggrVoiceRate

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.1141.2.92.1.1.32.1
snmpget -v2c -c public <target> COM21-HCXOC3-MIB::hcxOc3PortAggrVoiceRate.1

Start monitoring Com21 ComController HCX OC-3 ATM uplink card (legacy) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the COM21-HCXOC3-MIB::hcxOc3PortAggrVoiceRate OID value, configure state conditions and alerts, and monitor any Com21 ComController HCX OC-3 ATM uplink card (legacy) from a single console.

OID Breakdown

Upper-level ancestors (8 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.1141com21COM21-HCX-MIB
1.3.6.1.4.1.1141.2com21HcxCOM21-HCX-MIB
Numeric OIDNameModule
1.3.6.1.4.1.1141.2.92com21HcxOc3PortGroupCOM21-HCXOC3-MIB
1.3.6.1.4.1.1141.2.92.1com21HcxOc3PortTableCOM21-HCXOC3-MIB
1.3.6.1.4.1.1141.2.92.1.1com21HcxOc3PortEntryCOM21-HCXOC3-MIB
1.3.6.1.4.1.1141.2.92.1.1.32hcxOc3PortAggrVoiceRateCOM21-HCXOC3-MIB