| OID symbolic | OID numeric | Type | Access | Description |
|---|
| com21HcxCc | 1.3.6.1.4.1.1141.2.60 | | | This is the Com21 ComController Common Control
Unit MIB module. COM21 Part# 005-0025-00 |
| com21HcxCcUnitGroup | 1.3.6.1.4.1.1141.2.61 | | | |
| INT hcxCcShelfId | 1.3.6.1.4.1.1141.2.61.1 | INTEGER | read-only | contains the associated shelf id. |
| I32 hcxCcSlotId | 1.3.6.1.4.1.1141.2.61.2 | Integer32 | read-only | contains the Common Controller slot id. |
| STR hcxCcHardwareVersion | 1.3.6.1.4.1.1141.2.61.3 | DisplayString | read-only | contains the hardware version of the CC card. |
| STR hcxCcBootVersion | 1.3.6.1.4.1.1141.2.61.4 | DisplayString | read-only | contains the version of the CC card boot ROM. |
| STR hcxSoftwareRevision | 1.3.6.1.4.1.1141.2.61.6 | DisplayString | read-only | The Common Controller Software Revision is a
display string value which contains the software
revision of the currently loaded COM21 Common
Controller software downloaded from the software
server device. |
| PRI hcxControlPrimServState | 1.3.6.1.4.1.1141.2.61.7 | PrimServiceState | read-only | contains primary service state of the Common
Controller. This attribute indicates the overall
service state of the Controller. OOS indicates that
complete service cannot be provided. IS indicates
that the Controller is operating as normal, though
a non-service effecting error or test condition may
exist. |
| STR hcxControlSecServState | 1.3.6.1.4.1.1141.2.61.8 | DisplayString | read-only | contains a string defining the secondary service states
of the Common Controller. The states supported by the
com21HcxControlGroup are: FAN - indicates Fan Failure,
HIGH - indicates high temp condition, PWR - indicates
power problem. |
| INT hcxCcDiagTestAction | 1.3.6.1.4.1.1141.2.61.9 | INTEGER | read-write | This attribute is used to invoke the internal
Common Controller diagnostic test. In order to
activate this test, the card must be placed in
the test state. |
| INT hcxCcDiagTestResult | 1.3.6.1.4.1.1141.2.61.10 | INTEGER | read-only | This attribute contains the result of the last CC
card diagnostic test. |
| INT hcxCcTestStatusLed | 1.3.6.1.4.1.1141.2.61.11 | INTEGER | read-only | The CC Test Status LED is a read-only attribute
which describes the condition of the CC Test
Status light emitting diode located on the CC.
This indicates that a service effecting test is
in progress and that the LED is illuminated. |
| INT hcxCcFaultStatusLed | 1.3.6.1.4.1.1141.2.61.12 | INTEGER | read-only | The Ethernet Fault Status LED is a read-only
attribute which describes the condition of the
ComController Ethernet Fault Status light emitting
diode located on the Ethernet board. A value of on(1)
indicates that an fault condition has been detected
(for which a trap will have been issued) and the
LED is illuminated. |
| INT hcxCcEtherLinkStatusLed | 1.3.6.1.4.1.1141.2.61.13 | INTEGER | read-only | The Ethernet Link Status LED is a read-only
attribute which describes the condition of the
CC Ethernet Link Status light emitting diode
located on the CC board. A value of on(1)
indicates that the link is up and active, and
that the LED is illuminated. Will be off if no
card present. |
| INT hcxCcFlashBackupPeriod | 1.3.6.1.4.1.1141.2.61.14 | INTEGER | read-write | The period (in seconds) at which the CC shall
automatically backup any configuration data to
flash. This must be a multiple of 5 seconds upto
15 minutes. Default is 60 seconds. |
| INT hcxCcFlashBackupAction | 1.3.6.1.4.1.1141.2.61.15 | INTEGER | read-write | This attribute is used to invoke the Common
Controller to save all configuration data to
flash. |
| INT hcxCcFlashBackupResult | 1.3.6.1.4.1.1141.2.61.16 | INTEGER | read-only | This attribute contains the result of the last CC
user directed flash backup. |
| STR hcxSwitchSoftwareRevision | 1.3.6.1.4.1.1141.2.61.17 | DisplayString | read-only | software revision of the image loaded on the
embedded ATM switch. In the case of the compact
ComController this attribute refers to the boot
software version. |
| STR hcxSwitchHardwareRevision | 1.3.6.1.4.1.1141.2.61.18 | DisplayString | read-only | hardware revision of the embedded ATM switch. This
attribute is only applicable for the compact
ComController. |
| STR hcxSwitchSerialNumber | 1.3.6.1.4.1.1141.2.61.19 | DisplayString | read-only | serial number of the embedded ATM switch. This
attribute is only applicable for the compact
ComController. |
| INT hcxNtpv3Control | 1.3.6.1.4.1.1141.2.61.20 | INTEGER | read-write | this attribute controls the NTPv3 feature.
This features should NOT be enabled if NMAPS
is in use. The timer servers are specified via
com21HcxCcNtpGroup. Default diasble. |
| INT hcxDiskFaultState | 1.3.6.1.4.1.1141.2.61.21 | INTEGER | read-only | this attribute describes the fault state of the
PCMCIA disk. |
| STR hcxDiskIdentifier | 1.3.6.1.4.1.1141.2.61.22 | DisplayString | read-only | this attribute indentifies the type of PCMCIA
device. |
| I32 hcxMibVersion | 1.3.6.1.4.1.1141.2.61.23 | Integer32 | read-only | this attribute specifies the MIB version
used by CC. |
| com21HcxCcNtpGroup | 1.3.6.1.4.1.1141.2.62 | | | |
| com21HcxCcNtpTable | 1.3.6.1.4.1.1141.2.62.1 | | not-accessible | . |
| com21HcxCcNtpEntry | 1.3.6.1.4.1.1141.2.62.1.1 | | not-accessible | . |
| INT hcxCcNtpServerIndex | 1.3.6.1.4.1.1141.2.62.1.1.1 | INTEGER | read-only | this attribute defines both the index of the address
entry. The CC shall attempt to access each in order
starting with index 1. |
| IP hcxCcNtpServerAddress | 1.3.6.1.4.1.1141.2.62.1.1.2 | IpAddress | read-write | this attribute defines both the IP address of
a time server. |
| COM hcxCcNtpServerAddrStatus | 1.3.6.1.4.1.1141.2.62.1.1.3 | Com21RowStatus | read-create | Used to delete or create an entry. |
| NTF hcxControlPrimServStateChange | 1.3.6.1.4.1.1141.4.10 | | | generated whenever hcxControlPrimaryServiceState
changes value. This an event with no clear condition.
Only severity is WARNING. |
| NTF hcxControlSecServStateChange | 1.3.6.1.4.1.1141.4.11 | | | generated whenever hcxControlSecondaryServiceState
changes value. This an event with no clear condition.
Only severity is WARNING. |
| NTF hcxCcDiagTestComplete | 1.3.6.1.4.1.1141.4.12 | | | This notification is generated whenever the CC
card internal diagnostic tests are completed. Event
only, no clear. Only severity allowed is WARNING. |
| NTF hcxCcTestStatusLedChange | 1.3.6.1.4.1.1141.4.13 | | | generated whenever there is a change in test LED
status. This an event with no clear condition.
Only severity is WARNING. |
| NTF hcxCcFaultStatusLedChange | 1.3.6.1.4.1.1141.4.14 | | | generated whenever there is a change in the Fault
LED status. This an event with no clear condition.
Only severity is WARNING. |
| NTF hcxCcEtherLinkStatusLedChange | 1.3.6.1.4.1.1141.4.15 | | | generated whenever there is a change in link LED
status. This an event with no clear condition.
Only severity is WARNING. |
| NTF hcxCcFlashBackupComplete | 1.3.6.1.4.1.1141.4.16 | | | This notification is generated whenever the CC
card completes a user directed flash backup of
configuration. Only severity allowed is WARNING. |
| NTF hcxDiskAccessFailure | 1.3.6.1.4.1.1141.4.17 | | | generated whenever there is a failure to access
the PCMCIA disk. Default severity is MAJOR. |
| NTF hcxDiskAccessFailClear | 1.3.6.1.4.1.1141.4.18 | | | generated whenever a previously reported disk
failure is cleared. Severity is CLEARED. |
