RDN-CHASSIS-MIB

All MIBs › RDN-CHASSIS-MIB

Organization: Motorola

Last Updated: 2011-11-09

Category: DOCSIS and Cable

Description: Monitors chassis hardware inventory, card presence, and slot status on Motorola BSR broadband services router platforms.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is RDN-CHASSIS-MIB?

RDN-CHASSIS-MIB is a Motorola-proprietary MIB covering chassis-level hardware for Motorola BSR (Broadband Services Router) platforms, exposing hardware inventory information such as which cards or modules are present in each chassis slot. It belongs to the hardware-inventory/environmental monitoring category, focused on physical presence and slot status rather than traffic or protocol data. Its core monitoring value is hardware status: it lets an operator confirm that expected line cards or modules are physically present and healthy in each slot, quickly surfacing a missing, failed, or newly inserted card. No specific objects were included in the input for this module beyond the general description, so exact object names cannot be cited. It follows Motorola's proprietary chassis MIB pattern used across its BSR product line rather than the IETF ENTITY-MIB, and it is deployed on Motorola BSR broadband services routers used by cable/MSO operators for DOCSIS and broadband edge services. Engineers can download the RDN-CHASSIS-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in RDN-CHASSIS-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Motorola BSR (Broadband Services Router)

Monitoring Examples

No specific object names were supplied for this module, so a concrete polling example cannot be responsibly constructed; based on its description, an operator would poll per-slot card-presence and status objects to confirm all expected line cards in a Motorola BSR chassis are inserted and operating normally, and to detect a card removal or failure.

What Can Be Monitored

card presence per slot
slot status
chassis hardware inventory

Imported Objects

From DOCS-CABLE-DEVICE-MIB

docsDevEvLevel

OBJECT-TYPE

From IF-MIB

ifAdminStatus	OBJECT-TYPE
ifDescr	OBJECT-TYPE
ifIndex	OBJECT-TYPE
ifOperStatus	OBJECT-TYPE
ifType	OBJECT-TYPE

From RDN-MIB

riverdelta

MODULE-IDENTITY

From SNMPv2-MIB

sysDescr

OBJECT-TYPE

From SNMPv2-SMI

Counter32
Integer32
MODULE-IDENTITY
OBJECT-TYPE
TimeTicks
Unsigned32

From SNMPv2-TC

DisplayString
TruthValue

How to Use in IPNetwork Monitor

Example using rdnSlotUnerroreds OID:

Select a Motorola BSR (Broadband Services Router) (chassis slot/card hardware inventory) as the target host to create a monitor — the SNMP service should be up and running on it. Click New Monitor, then check SNMP Custom on the Favorites tab, click Next, and confirm the host. On the next page, click Select... to open the built-in SNMP MIB Browser and type rdnSlotUnerroreds into the Find box to locate it in the OID tree, selecting the specific row/instance you want to monitor since this is a table column, then select it and click OK. It reports the number of codewords received on this CMTS slot without error. On the monitor's Main parameters page you can set the target's SNMP port (default 161), credentials, polling interval, and other settings — see the SNMP Monitor help for details. On the State conditions and Alerting tabs, configure when the monitor should change state and trigger an alert; since this is a Counter32-type OID, Value bounds is the most useful condition here — trigger an alert if the counter's growth rate drops noticeably relative to overall traffic on this slot, since a falling proportion of error-free codewords indicates rising RF impairment. Click Finish to create the monitor; you can adjust any parameter later.

OIDs

OID symbolic	OID numeric	Type	Access	Description
rdnChassis	1.3.6.1.4.1.4981.1			MIB module for Motorola Chassis. Copyright (C) 2001, 2008 by Motorola, Inc. All rights reserved.
chassisNotificationObject	1.3.6.1.4.1.4981.1.0
INT chassisPowerFailureTrapInfo	1.3.6.1.4.1.4981.1.0.1	INTEGER	accessible-for-notify	Indicates the location of the Power Failure.
NTF chassisPowerFailureTrap	1.3.6.1.4.1.4981.1.0.2			A chassisPowerFailureTrap is generated when a Power Failure is detected in the system
INT chassisFanFailureTrapInfo	1.3.6.1.4.1.4981.1.0.3	INTEGER	accessible-for-notify	Indicates the location of the Fan Failure.
NTF chassisFanFailureTrap	1.3.6.1.4.1.4981.1.0.4			A chassisFanFailureTrap is generated when a Fan Failure is detected in the system
I32 rdnRedundancyFailedSlotNumber	1.3.6.1.4.1.4981.1.0.5	Integer32	accessible-for-notify	Chassis slot number that failed, or -1 if neither applicable nor determinable.
I32 rdnRedundancyBackupSlotNumber	1.3.6.1.4.1.4981.1.0.6	Integer32	accessible-for-notify	Slot number of the backup card that took over for the failed card, or -1 if neither applicable nor determinable.
NTF rdnBSRSrmSwitchoverTrap	1.3.6.1.4.1.4981.1.0.7			An SRM Card has failed, and a switchover has occurred to a redundant SRM card.
NTF rdnLinkUpTrap	1.3.6.1.4.1.4981.1.0.8			A proprietary Link Up Notification for all interfaces. This notification contains more details than the standard 'linkUp' notification in RFC 2863.
NTF rdnLinkDownTrap	1.3.6.1.4.1.4981.1.0.9			A proprietary Link Down Notification for all interfaces. This notification contains more details than the standard 'linkDown' notification in RFC 2863.
NTF rdnBsrTestTrap	1.3.6.1.4.1.4981.1.0.10			This is convenient test trap that Service personnel can generate manually, in debug mode, from the CLI, for diagnostic purposes ('generate snmp-trap [severity]'). Varbinds are docsDevEvLevel = trap severity level, and sysDescr = system description.
INT rdnChassisType	1.3.6.1.4.1.4981.1.1	INTEGER	read-only	Chassis type.
STR rdnChassisVersion	1.3.6.1.4.1.4981.1.2	DisplayString	read-only	Chassis hardware revision level, or an empty string if unavailable.
STR rdnChassisId	1.3.6.1.4.1.4981.1.3	DisplayString	read-write	Unique ID string. Defaults to chassis serial number if available, otherwise empty. Can also be set with 'snmp-server chassis-id'.
I32 rdnProcessorRam	1.3.6.1.4.1.4981.1.4	Integer32	read-only	Megabytes of RAM available to CPU.
I32 rdnNvRAMSize	1.3.6.1.4.1.4981.1.5	Integer32	read-only	Bytes of non-volatile configuration memory.
I32 rdnNvRAMUsed	1.3.6.1.4.1.4981.1.6	Integer32	read-only	Bytes of non-volatile configuration memory in use.
I32 rdnFlashSize	1.3.6.1.4.1.4981.1.7	Integer32	read-only	Bytes flash memory.
rdnCardTable	1.3.6.1.4.1.4981.1.8		not-accessible	Chassis card table.
rdnCardEntry	1.3.6.1.4.1.4981.1.8.1		not-accessible	Chassis card table.
U32 rdnCardIndex	1.3.6.1.4.1.4981.1.8.1.1	Unsigned32	not-accessible	Index into cardTable (not physical chassis slot number).
INT rdnCardType	1.3.6.1.4.1.4981.1.8.1.2	INTEGER	read-only	Functional type of this card.
STR rdnCardDescr	1.3.6.1.4.1.4981.1.8.1.3	DisplayString	read-only	Text description of this card.
STR rdnCardSerial	1.3.6.1.4.1.4981.1.8.1.4	DisplayString	read-only	The serial number of this card, or zero if unavailable.
STR rdnCardHwVersion	1.3.6.1.4.1.4981.1.8.1.5	DisplayString	read-only	Hardware revision level of this card, or an empty string if unavailable.
STR rdnCardSwVersion	1.3.6.1.4.1.4981.1.8.1.6	DisplayString	read-only	Version of the firmware or microcode installed on this card, or an empty string if unavailable.
I32 rdnCardSlotNumber	1.3.6.1.4.1.4981.1.8.1.7	Integer32	read-only	Slot number relative to the containing card or chassis, or -1 if neither applicable nor determinable.
I32 rdnCardContainedByIndex	1.3.6.1.4.1.4981.1.8.1.8	Integer32	read-only	cardIndex of the parent card which directly contains this card, or 0 if contained by the chassis, or -1 if not applicable nor determinable.
INT rdnCardOperStatus	1.3.6.1.4.1.4981.1.8.1.9	INTEGER	read-only	The operational status of the card. cardOperStatus is up when a card is recognized by the device and is enabled for operation. cardOperStatus is down if the card is not recognized by the device, or if it is not enabled for operation. cardOperStatus is standby if the card is enabled and acting as a standby slave. Intermediate stages (rom,flash,diag,boot,config) are also exposed.
I32 rdnChassisSlots	1.3.6.1.4.1.4981.1.9	Integer32	read-only	Number of slots in this chassis, or -1 if neither applicable nor determinable.
rdnSlotTable	1.3.6.1.4.1.4981.1.10		not-accessible	Chassis slot table.
rdnSlotEntry	1.3.6.1.4.1.4981.1.10.1		not-accessible	Chassis slot table.
I32 rdnSlotIndex	1.3.6.1.4.1.4981.1.10.1.1	Integer32	not-accessible	The index into rdnSlotTable (not physical slot number). This object's instance is always one number greater than the rdnSlotNumber (physical slot number) instance that it indexes.
INT rdnSlotType	1.3.6.1.4.1.4981.1.10.1.2	INTEGER	read-only	Functional type of this slot. 'io(3)' was used by older agents to report either CMTS, HSIM, or none. Newer agents will no longer report 'io(3)' and instead will use either 'hsim(4)' for HSIM, 'cmts(5)' for CMTS, or 'unkown(1)' for no module present.
I32 rdnSlotNumber	1.3.6.1.4.1.4981.1.10.1.3	Integer32	read-only	The physical chasis slot number relative to the containing card or chassis, or -1 if neither applicable nor determinable.
INT rdnSlotOperStatus	1.3.6.1.4.1.4981.1.10.1.4	INTEGER	read-only	The operational status of the chassis physical slot. rdnSlotOperStatus is up when a card is recognized by the system and is enabled for operation. rdnSlotOperStatus is down if a card is not present or recognized by the system, or if it is not enabled for operation. rdnSlotOperStatus is standby if the card is enabled and acting as a standby slave. A not-specified state indicates an unknown error condition
I32 rdnOfflineModemCount	1.3.6.1.4.1.4981.1.10.1.5	Integer32	read-only	Number of offline modems for this slot
I32 rdnOnlineModemCount	1.3.6.1.4.1.4981.1.10.1.6	Integer32	read-only	Number of online modems for this slot
I32 rdnActiveModemCount	1.3.6.1.4.1.4981.1.10.1.7	Integer32	read-only	Number of active modems for this slot
I32 rdnRegisteredModemCount	1.3.6.1.4.1.4981.1.10.1.8	Integer32	read-only	Number of registered modems for this slot
I32 rdnProvisionedModemCount	1.3.6.1.4.1.4981.1.10.1.9	Integer32	read-only	Number of provisioned modems for this slot
I32 rdnUnregisteredModemCount	1.3.6.1.4.1.4981.1.10.1.10	Integer32	read-only	Number of Unregistered modems for this slot
T/F rdnResetSlotStats	1.3.6.1.4.1.4981.1.10.1.11	TruthValue	read-write	The byte and packet counters for all the cable modems for the given slot are reset by a 'set' of this object to TRUE(1). This object will always return FALSE(2) when read.
C32 rdnSlotUnerroredsEx	1.3.6.1.4.1.4981.1.10.1.12	Counter32	read-only	Codewords received on this cmts slot without error. This includes all codewords, whether or not they were part of frames destined for this device.
C32 rdnSlotCorrecteds	1.3.6.1.4.1.4981.1.10.1.13	Counter32	read-only	Codewords received on this cmts slot with correctable errors. This includes all codewords, whether or not they were part of frames destined for this device.
C32 rdnSlotUncorrectables	1.3.6.1.4.1.4981.1.10.1.14	Counter32	read-only	Codewords received on this cmts slot with uncorrectable errors. This includes all codewords, whether or not they were part of frames destined for this device.
rdnCardIfIndexTable	1.3.6.1.4.1.4981.1.11		not-accessible	Chassis card table.
rdnCardIfIndexEntry	1.3.6.1.4.1.4981.1.11.1		not-accessible	Chassis card table.
I32 rdnCardIfIndex	1.3.6.1.4.1.4981.1.11.1.1	Integer32	read-only	matches RFC1213 ifTable IfIndex
I32 rdnCardIfSlotNumber	1.3.6.1.4.1.4981.1.11.1.2	Integer32	read-only	Chassis slot number, or -1 if neither applicable nor determinable.
I32 rdnCardIfPortNumber	1.3.6.1.4.1.4981.1.11.1.3	Integer32	read-only	Chassis port number, unique per port on a given card if available.
I32 rdnCardIfCardIndex	1.3.6.1.4.1.4981.1.11.1.4	Integer32	read-only	cardIndex of the card in the Chassis cardTable which contains this interface.
INT rdnCardIfConnectorTypeEnabled	1.3.6.1.4.1.4981.1.11.1.5	INTEGER	read-only	Interface connector type currently enabled. Value will be 1 if not known or not used, or 2 if none of this ports' interface connectors are enabled.
INT rdnCardIfLinkUpDownEnable	1.3.6.1.4.1.4981.1.11.1.6	INTEGER	read-write	This enables and disables the sending of the proprietary notifications 'rdnLinkUpTrap' and 'rdnLinkDownTrap' that provide more information than the standard link up and link down notifications. By default, these traps are disabled.
INT rdnCardIfPortType	1.3.6.1.4.1.4981.1.11.1.7	INTEGER	read-only	This object is used to identify port types for a given card. This object will report ethernet(1) for SRM ports and HSIM FE ports, gige(2) for GigE ports, cmts(3) for CMTS cards, cmts_dn(4) in case of downstream ports for CMTS cards, cmts_up(5) in case of upstream ports for CMTS cards, cmts_up_log(6) in case of upstream logical channels for CMTS cards, pos(7) for POS cards, lag(8) for Link Aggregation interfaces
TIK rdnSysUpTimeAtLastChassisChange	1.3.6.1.4.1.4981.1.12	TimeTicks	read-only	Time in seconds/100 from the last cold start to the last change in the chassis' configuration. This value will be updated whenever the chassis experiences a change in the count, type, or slot position of a card in cardTable.
TIK rdnSysUpTimeAtLastConfigChange	1.3.6.1.4.1.4981.1.13	TimeTicks	read-only	Time in seconds/100 from the last configuration change in the system. This value will be set back to zero whenever the system experiences a change in the configuration.
INT rdnChassisPowerTrapEnable	1.3.6.1.4.1.4981.1.14	INTEGER	read-write	This object controls SNMP traps for chassis Power Failure. If its value is set to enabled(1), then traps are generated. If the value is disabled(2), then traps are not generated. By default, this object has the value enabled(1).
INT rdnChassisFanTrapEnable	1.3.6.1.4.1.4981.1.15	INTEGER	read-write	This object controls SNMP traps for chassis Fan Failure. If its value is set to enabled(1), then traps are generated. If the value is disabled(2), then traps are not generated. By default, this object has the value enabled(1).
INT rdnChassisBSRSrmSwitchoverTrapEnable	1.3.6.1.4.1.4981.1.16	INTEGER	read-write	This object controls SNMP traps for redundant SRM switchovers. If its value is set to enabled(1), then traps are generated. If the value is disabled(2), then traps are not generated. By default, this object has the value enabled(1).

RFC description

Motorola BSR chassis management including slot, card, power, and interface monitoring with event trap support.

Start monitoring Motorola BSR (Broadband Services Router) (chassis slot/card hardware inventory) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download RDN-CHASSIS-MIB