All MIBs › BKTEL-HFC862-OA-V01-MIB
Category: DOCSIS and Cable, Vendor: BKTEL
Description: Monitors optical amplifier parameters of BKTEL HFC-862 nodes in cable HFC plant deployments.
Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.
What Is BKTEL-HFC862-OA-V01-MIB?
BKTEL-HFC862-OA-V01-MIB is a BKTEL Communications vendor MIB covering the optical amplifier (OA) component of the HFC-862 optical node product line used in hybrid fiber-coax cable plant deployments. It exposes configuration and status parameters for the optical amplifier function, such as gain/level settings and operational state. This module is aimed at monitoring the hardware status of the optical amplifier — signal level, operational state, and likely alarm conditions — critical for maintaining signal quality across the HFC fiber segment. No sample objects or module description are available in the provided material to confirm specific object names or dependency on other MIBs. It's deployed on BKTEL HFC-862 optical nodes within a cable operator's outside-plant HFC network, at points requiring optical signal amplification. Network engineers evaluating or troubleshooting this functionality can download the BKTEL-HFC862-OA-V01-MIB file directly to load it into their MIB browser.
IPNetwork Monitor allows you to monitor SNMP objects defined in BKTEL-HFC862-OA-V01-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.
Supported Devices
- BKTEL HFC-862 optical node (optical amplifier module, cable HFC network)
Monitoring Examples
No sample_objects were provided for this module, so no concrete object/table names from the input can ground a specific polling scenario. In general terms, an operator would expect to poll optical amplifier level and status parameters to detect a drop in signal gain or an amplifier fault that could degrade downstream cable service. The exact object names would need to be confirmed from the actual MIB source.
This MIB depends on
Related MIBs
Imported Objects
| DisplayString | |
| ModuleWidthValue | |
| NESlotValue | |
| PerceivedSeverityValue | |
| TruthValue | |
| modules | OBJECT-IDENTITY |
From RFC-1212
| OBJECT-TYPE |
OIDs
| OID symbolic | OID numeric | Type | Access | Description |
|---|---|---|---|---|
| oa | 1.3.6.1.4.1.7501.1.2.116 | |||
| oaCommon | 1.3.6.1.4.1.7501.1.2.116.1 | |||
| STR oaCommonDescr | 1.3.6.1.4.1.7501.1.2.116.1.2.1.3 | DisplayString | read-write | A textual description of the module. If not available, this Value should be set to a zero length string. |
| oaCommonEntry | 1.3.6.1.4.1.7501.1.2.116.1.2.1 | not-accessible | Common-Values for a module. | |
| STR oaCommonFirmwareId | 1.3.6.1.4.1.7501.1.2.116.1.2.1.4 | DisplayString | read-only | The firmware Id of the module. |
| MOD oaCommonModuleWidth | 1.3.6.1.4.1.7501.1.2.116.1.2.1.5 | ModuleWidthValue | read-only | The width of the module in multiples of slots (1, 2, ...) |
| INT oaCommonNumberOfModules | 1.3.6.1.4.1.7501.1.2.116.1.1 | INTEGER | read-only | Number of modules in table. |
| oaCommonTable | 1.3.6.1.4.1.7501.1.2.116.1.2 | not-accessible | The table contains all modules of the OA-type in the NE | |
| STR oaCommonType | 1.3.6.1.4.1.7501.1.2.116.1.2.1.2 | DisplayString | read-only | The type of physical module. modSlotEmpty indicates an empty slot. A Value of modSlotUnknown indicates that the type of module is unknown. |
| EXT oaConfigMaskExtIO | 1.3.6.1.4.1.7501.1.2.116.3.1.1.5 | ExtIOmask | read-write | The alarm/warning mask that activates the device's external IO port. |
| EXT oaConfigModeExtIO | 1.3.6.1.4.1.7501.1.2.116.3.1.1.4 | ExtIOmode | read-write | The mode and usage of the device's external IO port. |
| NES oaConfigNESlotWrite | 1.3.6.1.4.1.7501.1.2.116.3.1.1.1 | NESlotWriteValue | read-write | By writing this variable a slot can be assigned for devices that dont support hardware slot detection. Reading '-1' means that the slot position is NOT writable. |
| INT oaConfigOutputPwrOrGainAdjust | 1.3.6.1.4.1.7501.1.2.116.3.1.1.3 | INTEGER | read-write | This variable can be used to adjust the desired output power (or gain) value in 0.1 dB units relative to its nominal level. See oaConfigRegulationMode variable too |
| REG oaConfigRegulationMode | 1.3.6.1.4.1.7501.1.2.116.3.1.1.2 | RegulationMode | read-write | The regulation mode of the device. - regModeConstantOutputPower(1): If the device runs in constant output power mode, then all *OutputPwrOrGain* variables are interpreted as 'Output Power' specific. - regModeConstantGain(2): If the device runs in constant gain mode, then all *OutputPwrOrGain* variables are interpreted as 'Gain' specific. |
| SBS oaConfigSbsEvaluationMode | 1.3.6.1.4.1.7501.1.2.116.3.1.1.6 | SbsEvaluationMode | read-write | The SBS threshold evaluation mode. |
| oaConfiguration | 1.3.6.1.4.1.7501.1.2.116.3 | |||
| oaConfigurationEntry | 1.3.6.1.4.1.7501.1.2.116.3.1.1 | not-accessible | ||
| oaConfigurationTable | 1.3.6.1.4.1.7501.1.2.116.3.1 | not-accessible | ||
| oaControl | 1.3.6.1.4.1.7501.1.2.116.4 | |||
| oaControlEntry | 1.3.6.1.4.1.7501.1.2.116.4.1.1 | not-accessible | Alarms for a module. | |
| T/F oaControlLaserShutdown | 1.3.6.1.4.1.7501.1.2.116.4.1.1.1 | TruthValue | read-write | Shutdown the laser(s), optical power on/off. |
| T/F oaControlModuleLedBlink | 1.3.6.1.4.1.7501.1.2.116.4.1.1.3 | TruthValue | read-write | Writing this variable to true(1) lets the device's modul LED blink green for 10 seconds. Writing this variable to false(2) stops blinking at once. This variable always returns false(2) on read requests |
| T/F oaControlReset | 1.3.6.1.4.1.7501.1.2.116.4.1.1.2 | TruthValue | read-write | Reset the module. |
| T/F oaControlSbsEvaluationStart | 1.3.6.1.4.1.7501.1.2.116.4.1.1.4 | TruthValue | read-write | Setting to true(1) starts an SBS threshold evaluation process. Always reads as false(2) |
| oaControlTable | 1.3.6.1.4.1.7501.1.2.116.4.1 | not-accessible | ||
| oaDisplay | 1.3.6.1.4.1.7501.1.2.116.6 | |||
| T/F oaDisplayAmplifierIsRamanType | 1.3.6.1.4.1.7501.1.2.116.6.1.1.50 | TruthValue | read-only | Returns true(1) if this amplifier is of RAMAN type |
| oaDisplayEntry | 1.3.6.1.4.1.7501.1.2.116.6.1.1 | not-accessible | ||
| T/F oaDisplayExtIOSupported | 1.3.6.1.4.1.7501.1.2.116.6.1.1.3 | TruthValue | read-only | Return 'true(1)' if external I/O feature is supported by the device. |
| INT oaDisplayInputVoltageNominal | 1.3.6.1.4.1.7501.1.2.116.6.1.1.11 | INTEGER | read-only | The nominal value of input voltage in 0.1 V units. |
| INT oaDisplayInternalVoltage1Nominal | 1.3.6.1.4.1.7501.1.2.116.6.1.1.12 | INTEGER | read-only | The nominal value of internal voltage no. 1 in 0.1 V units. |
| INT oaDisplayInternalVoltage2Nominal | 1.3.6.1.4.1.7501.1.2.116.6.1.1.13 | INTEGER | read-only | The nominal value of internal voltage no. 2 in 0.1 V units. |
| INT oaDisplayInternalVoltage3Nominal | 1.3.6.1.4.1.7501.1.2.116.6.1.1.14 | INTEGER | read-only | The nominal value of internal voltage no. 3 in 0.1 V units. |
| LAS oaDisplayLaser1FeaturesSupported | 1.3.6.1.4.1.7501.1.2.116.6.1.1.40 | LaserFeatures | read-only | The features supported by laser no.1 A bitfield containing the features supplied by this laser. Note that laserCurrent is always supplied. |
| INT oaDisplayLaser1PumpPowerRel | 1.3.6.1.4.1.7501.1.2.116.6.1.1.30 | INTEGER | read-only | The pump power of laser no.1 in steps of 0.1% |
| INT oaDisplayLaser1VoltageNominal | 1.3.6.1.4.1.7501.1.2.116.6.1.1.20 | INTEGER | read-only | The nominal supply voltage of laser no.1 in 0.1 V units. |
| LAS oaDisplayLaser2FeaturesSupported | 1.3.6.1.4.1.7501.1.2.116.6.1.1.41 | LaserFeatures | read-only | The features supported by laser no.2 |
| INT oaDisplayLaser2PumpPowerRel | 1.3.6.1.4.1.7501.1.2.116.6.1.1.31 | INTEGER | read-only | The pump power of laser no.2 in steps of 0.1% |
| INT oaDisplayLaser2VoltageNominal | 1.3.6.1.4.1.7501.1.2.116.6.1.1.21 | INTEGER | read-only | The nominal supply voltage of laser no.2 in 0.1 V units. |
| LAS oaDisplayLaser3FeaturesSupported | 1.3.6.1.4.1.7501.1.2.116.6.1.1.42 | LaserFeatures | read-only | The features supported by laser no.3 |
| INT oaDisplayLaser3PumpPowerRel | 1.3.6.1.4.1.7501.1.2.116.6.1.1.32 | INTEGER | read-only | The pump power of laser no.3 in steps of 0.1% |
| INT oaDisplayLaser3VoltageNominal | 1.3.6.1.4.1.7501.1.2.116.6.1.1.22 | INTEGER | read-only | The nominal supply voltage of laser no.3 in 0.1 V units. |
| LAS oaDisplayLaser4FeaturesSupported | 1.3.6.1.4.1.7501.1.2.116.6.1.1.43 | LaserFeatures | read-only | The features supported by laser no.4 |
| INT oaDisplayLaser4PumpPowerRel | 1.3.6.1.4.1.7501.1.2.116.6.1.1.33 | INTEGER | read-only | The pump power of laser no.4 in steps of 0.1% |
| INT oaDisplayLaser4VoltageNominal | 1.3.6.1.4.1.7501.1.2.116.6.1.1.23 | INTEGER | read-only | The nominal supply voltage of laser no.4 in 0.1 V units. |
| LAS oaDisplayLaser5FeaturesSupported | 1.3.6.1.4.1.7501.1.2.116.6.1.1.44 | LaserFeatures | read-only | The features supported by laser no.5 |
| INT oaDisplayLaser5PumpPowerRel | 1.3.6.1.4.1.7501.1.2.116.6.1.1.34 | INTEGER | read-only | The pump power of laser no.5 in steps of 0.1% |
| INT oaDisplayLaser5VoltageNominal | 1.3.6.1.4.1.7501.1.2.116.6.1.1.24 | INTEGER | read-only | The nominal supply voltage of laser no.5 in 0.1 V units. |
| LAS oaDisplayLaser6FeaturesSupported | 1.3.6.1.4.1.7501.1.2.116.6.1.1.45 | LaserFeatures | read-only | The features supported by laser no.6 |
| INT oaDisplayLaser6PumpPowerRel | 1.3.6.1.4.1.7501.1.2.116.6.1.1.35 | INTEGER | read-only | The pump power of laser no.6 in steps of 0.1% |
| INT oaDisplayLaser6VoltageNominal | 1.3.6.1.4.1.7501.1.2.116.6.1.1.25 | INTEGER | read-only | The nominal supply voltage of laser no.6 in 0.1 V units. |
| INT oaDisplayNumberOfInternalVoltages | 1.3.6.1.4.1.7501.1.2.116.6.1.1.2 | INTEGER | read-only | The number of internal voltages monitored by this optical amplifier |
| INT oaDisplayNumberOfLasers | 1.3.6.1.4.1.7501.1.2.116.6.1.1.1 | INTEGER | read-only | The number of lasers used by this optical amplifier |
| INT oaDisplayOutputPwrOrGainAdjusted | 1.3.6.1.4.1.7501.1.2.116.6.1.1.10 | INTEGER | read-only | The adjusted desired value of output power (or gain) in 0.1 dB(m) units. See oaConfigRegulationMode variable too |
| INT oaDisplayOutputPwrOrGainNominal | 1.3.6.1.4.1.7501.1.2.116.6.1.1.9 | INTEGER | read-only | The nominal value of output power (or gain) in 0.1 dB(m) units. See oaConfigRegulationMode variable too |
| T/F oaDisplayReturnLossSupported | 1.3.6.1.4.1.7501.1.2.116.6.1.1.5 | TruthValue | read-only | Return 'true(1)' if ReturnLoss feature is supported by the device. |
| INT oaDisplaySbsEvaluatedThreshold | 1.3.6.1.4.1.7501.1.2.116.6.1.1.6 | INTEGER | read-only | The evaluated SBS output power or gain threshold in 0.1 dB(m) units. Not supported by all optical amplifiers |
| SBS oaDisplaySbsLastEvaluationState | 1.3.6.1.4.1.7501.1.2.116.6.1.1.7 | SbsEvaluationState | read-only | The result of last SBS threshold evaluation process. Returns 'evaluationNotSupported(1)' if SBS threshold evaluation is not supported by this optical amplifier |
| STR oaDisplaySbsLastEvaluationTime | 1.3.6.1.4.1.7501.1.2.116.6.1.1.8 | DisplayString | read-only | The time of last successfull SBS threshold evaluation process. Not supported by all optical amplifiers |
| T/F oaDisplaySbsSupported | 1.3.6.1.4.1.7501.1.2.116.6.1.1.4 | TruthValue | read-only | Return 'true(1)' if SBS feature is supported by the device. |
| oaDisplayTable | 1.3.6.1.4.1.7501.1.2.116.6.1 | not-accessible | ||
| INT oaInputPowerHi | 1.3.6.1.4.1.7501.1.2.116.5.1.1.9 | INTEGER | read-write | Input power high warning threshold in steps of 0.1dBm. |
| INT oaInputPowerHiHi | 1.3.6.1.4.1.7501.1.2.116.5.1.1.10 | INTEGER | read-write | Input power high alarm threshold in steps of 0.1dBm. |
| INT oaInputPowerLo | 1.3.6.1.4.1.7501.1.2.116.5.1.1.7 | INTEGER | read-write | Input power low warning threshold in steps of 0.1dBm. |
| INT oaInputPowerLoLo | 1.3.6.1.4.1.7501.1.2.116.5.1.1.6 | INTEGER | read-write | Input power low alarm threshold in steps of 0.1dBm. |
| INT oaInputPowerValue | 1.3.6.1.4.1.7501.1.2.116.5.1.1.8 | INTEGER | read-only | Input power in steps of 0.1dBm. |
| INT oaInputVoltageHi | 1.3.6.1.4.1.7501.1.2.116.5.1.1.24 | INTEGER | read-only | The input supply voltage high warning threshold in steps of 0.1 Volts. |
| INT oaInputVoltageHiHi | 1.3.6.1.4.1.7501.1.2.116.5.1.1.25 | INTEGER | read-only | The input supply voltage high alarm threshold in steps of 0.1 Volts. |
| INT oaInputVoltageLo | 1.3.6.1.4.1.7501.1.2.116.5.1.1.22 | INTEGER | read-only | The input supply voltage low warning threshold in steps of 0.1 Volts. |
| INT oaInputVoltageLoLo | 1.3.6.1.4.1.7501.1.2.116.5.1.1.21 | INTEGER | read-only | The input supply voltage low alarm threshold in steps of 0.1 Volts. |
| INT oaInputVoltageValue | 1.3.6.1.4.1.7501.1.2.116.5.1.1.23 | INTEGER | read-only | The input supply voltage in steps of 0.1 Volts. Input supply voltage nominal value, see 'oaDisplayInputVoltageNominal' |
| INT oaInternalVoltage1Hi | 1.3.6.1.4.1.7501.1.2.116.5.1.1.49 | INTEGER | read-only | The internal voltage high warning threshold in steps of 0.1 Volts. |
| INT oaInternalVoltage1HiHi | 1.3.6.1.4.1.7501.1.2.116.5.1.1.50 | INTEGER | read-only | The internal voltage high alarm threshold in steps of 0.1 Volts. |
| INT oaInternalVoltage1Lo | 1.3.6.1.4.1.7501.1.2.116.5.1.1.47 | INTEGER | read-only | The internal voltage low warning threshold in steps of 0.1 Volts. |
| INT oaInternalVoltage1LoLo | 1.3.6.1.4.1.7501.1.2.116.5.1.1.46 | INTEGER | read-only | The internal voltage low alarm threshold in steps of 0.1 Volts. |
| INT oaInternalVoltage1Value | 1.3.6.1.4.1.7501.1.2.116.5.1.1.48 | INTEGER | read-only | The internal voltage in steps of 0.1 Volts. Internal voltage nominal value, see 'oaDisplayInternalVoltage1Nominal' |
| INT oaInternalVoltage2Hi | 1.3.6.1.4.1.7501.1.2.116.5.1.1.54 | INTEGER | read-only | The internal voltage high warning threshold in steps of 0.1 Volts. |
| INT oaInternalVoltage2HiHi | 1.3.6.1.4.1.7501.1.2.116.5.1.1.55 | INTEGER | read-only | The internal voltage high alarm threshold in steps of 0.1 Volts. |
| INT oaInternalVoltage2Lo | 1.3.6.1.4.1.7501.1.2.116.5.1.1.52 | INTEGER | read-only | The internal voltage low warning threshold in steps of 0.1 Volts. |
| INT oaInternalVoltage2LoLo | 1.3.6.1.4.1.7501.1.2.116.5.1.1.51 | INTEGER | read-only | The internal voltage low alarm threshold in steps of 0.1 Volts. |
| INT oaInternalVoltage2Value | 1.3.6.1.4.1.7501.1.2.116.5.1.1.53 | INTEGER | read-only | The internal voltage in steps of 0.1 Volts. Internal voltage nominal value, see 'oaDisplayInternalVoltage2Nominal' |
| INT oaInternalVoltage3Hi | 1.3.6.1.4.1.7501.1.2.116.5.1.1.59 | INTEGER | read-only | The internal voltage high warning threshold in steps of 0.1 Volts. |
| INT oaInternalVoltage3HiHi | 1.3.6.1.4.1.7501.1.2.116.5.1.1.60 | INTEGER | read-only | The internal voltage high alarm threshold in steps of 0.1 Volts. |
| INT oaInternalVoltage3Lo | 1.3.6.1.4.1.7501.1.2.116.5.1.1.57 | INTEGER | read-only | The internal voltage low warning threshold in steps of 0.1 Volts. |
| INT oaInternalVoltage3LoLo | 1.3.6.1.4.1.7501.1.2.116.5.1.1.56 | INTEGER | read-only | The internal voltage low alarm threshold in steps of 0.1 Volts. |
| INT oaInternalVoltage3Value | 1.3.6.1.4.1.7501.1.2.116.5.1.1.58 | INTEGER | read-only | The internal voltage in steps of 0.1 Volts. Internal voltage nominal value, see 'oaDisplayInternalVoltage3Nominal' |
| INT oaLaser1CurrentRelHi | 1.3.6.1.4.1.7501.1.2.116.5.1.1.89 | INTEGER | read-only | Relative laser no.1 current high warning threshold in steps of 0.1%. |
| INT oaLaser1CurrentRelHiHi | 1.3.6.1.4.1.7501.1.2.116.5.1.1.90 | INTEGER | read-only | Relative laser no.1 current high alarm threshold in steps of 0.1%. |
| INT oaLaser1CurrentRelLo | 1.3.6.1.4.1.7501.1.2.116.5.1.1.87 | INTEGER | read-only | Relative laser no.1 current low warning threshold in steps of 0.1%. |
| INT oaLaser1CurrentRelLoLo | 1.3.6.1.4.1.7501.1.2.116.5.1.1.86 | INTEGER | read-only | Relative laser no.1 current low alarm threshold in steps of 0.1%. |
| INT oaLaser1CurrentRelValue | 1.3.6.1.4.1.7501.1.2.116.5.1.1.88 | INTEGER | read-only | The laser no.1 current relative to the current at begin of life in steps of 0.1%. |
| INT oaLaser1TecRelHi | 1.3.6.1.4.1.7501.1.2.116.5.1.1.94 | INTEGER | read-only | Thermo-electric-cooler current of laser no.1 high warning threshold in steps of 0.1%. |
| INT oaLaser1TecRelHiHi | 1.3.6.1.4.1.7501.1.2.116.5.1.1.95 | INTEGER | read-only | Thermo-electric-cooler current of laser no.1 high alarm threshold in steps of 0.1%. |
| INT oaLaser1TecRelLo | 1.3.6.1.4.1.7501.1.2.116.5.1.1.92 | INTEGER | read-only | Thermo-electric-cooler current of laser no.1 low warning threshold in steps of 0.1%. |
| INT oaLaser1TecRelLoLo | 1.3.6.1.4.1.7501.1.2.116.5.1.1.91 | INTEGER | read-only | Thermo-electric-cooler current of laser no.1 low alarm threshold in steps of 0.1%. |
| INT oaLaser1TecRelValue | 1.3.6.1.4.1.7501.1.2.116.5.1.1.93 | INTEGER | read-only | The thermo-electric-cooler current of laser no.1 relative to its maximum value in steps of 0.1%. |
| INT oaLaser1TemperatureHi | 1.3.6.1.4.1.7501.1.2.116.5.1.1.99 | INTEGER | read-only | Temperature of laser no.1 high warning threshold in steps of 0.1 Celsius Degrees. |
| INT oaLaser1TemperatureHiHi | 1.3.6.1.4.1.7501.1.2.116.5.1.1.100 | INTEGER | read-only | Temperature of laser no.1 high alarm threshold in steps of 0.1 Celsius Degrees. |
| INT oaLaser1TemperatureLo | 1.3.6.1.4.1.7501.1.2.116.5.1.1.97 | INTEGER | read-only | Temperature of laser no.1 low warning threshold in steps of 0.1 Celsius Degrees. |
| INT oaLaser1TemperatureLoLo | 1.3.6.1.4.1.7501.1.2.116.5.1.1.96 | INTEGER | read-only | Temperature of laser no.1 low alarm threshold in steps of 0.1 Celsius Degrees. |
| INT oaLaser1TemperatureValue | 1.3.6.1.4.1.7501.1.2.116.5.1.1.98 | INTEGER | read-only | Temperature of laser no.1 in steps of 0.1 Celsius Degrees. |
| INT oaLaser1VoltageHi | 1.3.6.1.4.1.7501.1.2.116.5.1.1.104 | INTEGER | read-only | The supply voltage of laser no.1 high warning threshold in steps of 0.1 Volts. |
| INT oaLaser1VoltageHiHi | 1.3.6.1.4.1.7501.1.2.116.5.1.1.105 | INTEGER | read-only | The supply voltage of laser no.1 high alarm threshold in steps of 0.1 Volts. |
| INT oaLaser1VoltageLo | 1.3.6.1.4.1.7501.1.2.116.5.1.1.102 | INTEGER | read-only | The supply voltage of laser no.1 low warning threshold in steps of 0.1 Volts. |
| INT oaLaser1VoltageLoLo | 1.3.6.1.4.1.7501.1.2.116.5.1.1.101 | INTEGER | read-only | The supply voltage of laser no.1 low alarm threshold in steps of 0.1 Volts. |
| INT oaLaser1VoltageValue | 1.3.6.1.4.1.7501.1.2.116.5.1.1.103 | INTEGER | read-only | The supply voltage of laser no.1 in steps of 0.1 Volts. |
| INT oaLaser2CurrentRelHi | 1.3.6.1.4.1.7501.1.2.116.5.1.1.114 | INTEGER | read-only | Relative laser no.1 current high warning threshold in steps of 0.1%. |
| INT oaLaser2CurrentRelHiHi | 1.3.6.1.4.1.7501.1.2.116.5.1.1.115 | INTEGER | read-only | Relative laser no.1 current high alarm threshold in steps of 0.1%. |
| INT oaLaser2CurrentRelLo | 1.3.6.1.4.1.7501.1.2.116.5.1.1.112 | INTEGER | read-only | Relative laser no.1 current low warning threshold in steps of 0.1%. |
| INT oaLaser2CurrentRelLoLo | 1.3.6.1.4.1.7501.1.2.116.5.1.1.111 | INTEGER | read-only | Relative laser no.1 current low alarm threshold in steps of 0.1%. |
| INT oaLaser2CurrentRelValue | 1.3.6.1.4.1.7501.1.2.116.5.1.1.113 | INTEGER | read-only | The laser no.1 current relative to the current at begin of life in steps of 0.1%. |
| INT oaLaser2TecRelHi | 1.3.6.1.4.1.7501.1.2.116.5.1.1.119 | INTEGER | read-only | Thermo-electric-cooler current of laser no.1 high warning threshold in steps of 0.1%. |
| INT oaLaser2TecRelHiHi | 1.3.6.1.4.1.7501.1.2.116.5.1.1.120 | INTEGER | read-only | Thermo-electric-cooler current of laser no.1 high alarm threshold in steps of 0.1%. |
| INT oaLaser2TecRelLo | 1.3.6.1.4.1.7501.1.2.116.5.1.1.117 | INTEGER | read-only | Thermo-electric-cooler current of laser no.1 low warning threshold in steps of 0.1%. |
| INT oaLaser2TecRelLoLo | 1.3.6.1.4.1.7501.1.2.116.5.1.1.116 | INTEGER | read-only | Thermo-electric-cooler current of laser no.1 low alarm threshold in steps of 0.1%. |
| INT oaLaser2TecRelValue | 1.3.6.1.4.1.7501.1.2.116.5.1.1.118 | INTEGER | read-only | The thermo-electric-cooler current of laser no.1 relative to its maximum value in steps of 0.1%. |
| INT oaLaser2TemperatureHi | 1.3.6.1.4.1.7501.1.2.116.5.1.1.124 | INTEGER | read-only | Temperature of laser no.1 high warning threshold in steps of 0.1 Celsius Degrees. |
| INT oaLaser2TemperatureHiHi | 1.3.6.1.4.1.7501.1.2.116.5.1.1.125 | INTEGER | read-only | Temperature of laser no.1 high alarm threshold in steps of 0.1 Celsius Degrees. |
| INT oaLaser2TemperatureLo | 1.3.6.1.4.1.7501.1.2.116.5.1.1.122 | INTEGER | read-only | Temperature of laser no.1 low warning threshold in steps of 0.1 Celsius Degrees. |
| INT oaLaser2TemperatureLoLo | 1.3.6.1.4.1.7501.1.2.116.5.1.1.121 | INTEGER | read-only | Temperature of laser no.1 low alarm threshold in steps of 0.1 Celsius Degrees. |
| INT oaLaser2TemperatureValue | 1.3.6.1.4.1.7501.1.2.116.5.1.1.123 | INTEGER | read-only | Temperature of laser no.1 in steps of 0.1 Celsius Degrees. |
| INT oaLaser2VoltageHi | 1.3.6.1.4.1.7501.1.2.116.5.1.1.129 | INTEGER | read-only | The supply voltage of laser no.1 high warning threshold in steps of 0.1 Volts. |
| INT oaLaser2VoltageHiHi | 1.3.6.1.4.1.7501.1.2.116.5.1.1.130 | INTEGER | read-only | The supply voltage of laser no.1 high alarm threshold in steps of 0.1 Volts. |
| INT oaLaser2VoltageLo | 1.3.6.1.4.1.7501.1.2.116.5.1.1.127 | INTEGER | read-only | The supply voltage of laser no.1 low warning threshold in steps of 0.1 Volts. |
| INT oaLaser2VoltageLoLo | 1.3.6.1.4.1.7501.1.2.116.5.1.1.126 | INTEGER | read-only | The supply voltage of laser no.1 low alarm threshold in steps of 0.1 Volts. |
| INT oaLaser2VoltageValue | 1.3.6.1.4.1.7501.1.2.116.5.1.1.128 | INTEGER | read-only | The supply voltage of laser no.1 in steps of 0.1 Volts. |
| INT oaLaser3CurrentRelHi | 1.3.6.1.4.1.7501.1.2.116.5.1.1.139 | INTEGER | read-only | Relative laser no.1 current high warning threshold in steps of 0.1%. |
| INT oaLaser3CurrentRelHiHi | 1.3.6.1.4.1.7501.1.2.116.5.1.1.140 | INTEGER | read-only | Relative laser no.1 current high alarm threshold in steps of 0.1%. |
| INT oaLaser3CurrentRelLo | 1.3.6.1.4.1.7501.1.2.116.5.1.1.137 | INTEGER | read-only | Relative laser no.1 current low warning threshold in steps of 0.1%. |
| INT oaLaser3CurrentRelLoLo | 1.3.6.1.4.1.7501.1.2.116.5.1.1.136 | INTEGER | read-only | Relative laser no.1 current low alarm threshold in steps of 0.1%. |
| INT oaLaser3CurrentRelValue | 1.3.6.1.4.1.7501.1.2.116.5.1.1.138 | INTEGER | read-only | The laser no.1 current relative to the current at begin of life in steps of 0.1%. |
| INT oaLaser3TecRelHi | 1.3.6.1.4.1.7501.1.2.116.5.1.1.144 | INTEGER | read-only | Thermo-electric-cooler current of laser no.1 high warning threshold in steps of 0.1%. |
| INT oaLaser3TecRelHiHi | 1.3.6.1.4.1.7501.1.2.116.5.1.1.145 | INTEGER | read-only | Thermo-electric-cooler current of laser no.1 high alarm threshold in steps of 0.1%. |
| INT oaLaser3TecRelLo | 1.3.6.1.4.1.7501.1.2.116.5.1.1.142 | INTEGER | read-only | Thermo-electric-cooler current of laser no.1 low warning threshold in steps of 0.1%. |
| INT oaLaser3TecRelLoLo | 1.3.6.1.4.1.7501.1.2.116.5.1.1.141 | INTEGER | read-only | Thermo-electric-cooler current of laser no.1 low alarm threshold in steps of 0.1%. |
| INT oaLaser3TecRelValue | 1.3.6.1.4.1.7501.1.2.116.5.1.1.143 | INTEGER | read-only | The thermo-electric-cooler current of laser no.1 relative to its maximum value in steps of 0.1%. |
| INT oaLaser3TemperatureHi | 1.3.6.1.4.1.7501.1.2.116.5.1.1.149 | INTEGER | read-only | Temperature of laser no.1 high warning threshold in steps of 0.1 Celsius Degrees. |
| INT oaLaser3TemperatureHiHi | 1.3.6.1.4.1.7501.1.2.116.5.1.1.150 | INTEGER | read-only | Temperature of laser no.1 high alarm threshold in steps of 0.1 Celsius Degrees. |
| INT oaLaser3TemperatureLo | 1.3.6.1.4.1.7501.1.2.116.5.1.1.147 | INTEGER | read-only | Temperature of laser no.1 low warning threshold in steps of 0.1 Celsius Degrees. |
| INT oaLaser3TemperatureLoLo | 1.3.6.1.4.1.7501.1.2.116.5.1.1.146 | INTEGER | read-only | Temperature of laser no.1 low alarm threshold in steps of 0.1 Celsius Degrees. |
| INT oaLaser3TemperatureValue | 1.3.6.1.4.1.7501.1.2.116.5.1.1.148 | INTEGER | read-only | Temperature of laser no.1 in steps of 0.1 Celsius Degrees. |
| INT oaLaser3VoltageHi | 1.3.6.1.4.1.7501.1.2.116.5.1.1.154 | INTEGER | read-only | The supply voltage of laser no.1 high warning threshold in steps of 0.1 Volts. |
| INT oaLaser3VoltageHiHi | 1.3.6.1.4.1.7501.1.2.116.5.1.1.155 | INTEGER | read-only | The supply voltage of laser no.1 high alarm threshold in steps of 0.1 Volts. |
| INT oaLaser3VoltageLo | 1.3.6.1.4.1.7501.1.2.116.5.1.1.152 | INTEGER | read-only | The supply voltage of laser no.1 low warning threshold in steps of 0.1 Volts. |
| INT oaLaser3VoltageLoLo | 1.3.6.1.4.1.7501.1.2.116.5.1.1.151 | INTEGER | read-only | The supply voltage of laser no.1 low alarm threshold in steps of 0.1 Volts. |
| INT oaLaser3VoltageValue | 1.3.6.1.4.1.7501.1.2.116.5.1.1.153 | INTEGER | read-only | The supply voltage of laser no.1 in steps of 0.1 Volts. |
| INT oaLaser4CurrentRelHi | 1.3.6.1.4.1.7501.1.2.116.5.1.1.164 | INTEGER | read-only | Relative laser no.1 current high warning threshold in steps of 0.1%. |
| INT oaLaser4CurrentRelHiHi | 1.3.6.1.4.1.7501.1.2.116.5.1.1.165 | INTEGER | read-only | Relative laser no.1 current high alarm threshold in steps of 0.1%. |
| INT oaLaser4CurrentRelLo | 1.3.6.1.4.1.7501.1.2.116.5.1.1.162 | INTEGER | read-only | Relative laser no.1 current low warning threshold in steps of 0.1%. |
| INT oaLaser4CurrentRelLoLo | 1.3.6.1.4.1.7501.1.2.116.5.1.1.161 | INTEGER | read-only | Relative laser no.1 current low alarm threshold in steps of 0.1%. |
| INT oaLaser4CurrentRelValue | 1.3.6.1.4.1.7501.1.2.116.5.1.1.163 | INTEGER | read-only | The laser no.1 current relative to the current at begin of life in steps of 0.1%. |
| INT oaLaser4TecRelHi | 1.3.6.1.4.1.7501.1.2.116.5.1.1.169 | INTEGER | read-only | Thermo-electric-cooler current of laser no.1 high warning threshold in steps of 0.1%. |
| INT oaLaser4TecRelHiHi | 1.3.6.1.4.1.7501.1.2.116.5.1.1.170 | INTEGER | read-only | Thermo-electric-cooler current of laser no.1 high alarm threshold in steps of 0.1%. |
| INT oaLaser4TecRelLo | 1.3.6.1.4.1.7501.1.2.116.5.1.1.167 | INTEGER | read-only | Thermo-electric-cooler current of laser no.1 low warning threshold in steps of 0.1%. |
| INT oaLaser4TecRelLoLo | 1.3.6.1.4.1.7501.1.2.116.5.1.1.166 | INTEGER | read-only | Thermo-electric-cooler current of laser no.1 low alarm threshold in steps of 0.1%. |
| INT oaLaser4TecRelValue | 1.3.6.1.4.1.7501.1.2.116.5.1.1.168 | INTEGER | read-only | The thermo-electric-cooler current of laser no.1 relative to its maximum value in steps of 0.1%. |
| INT oaLaser4TemperatureHi | 1.3.6.1.4.1.7501.1.2.116.5.1.1.174 | INTEGER | read-only | Temperature of laser no.1 high warning threshold in steps of 0.1 Celsius Degrees. |
| INT oaLaser4TemperatureHiHi | 1.3.6.1.4.1.7501.1.2.116.5.1.1.175 | INTEGER | read-only | Temperature of laser no.1 high alarm threshold in steps of 0.1 Celsius Degrees. |
| INT oaLaser4TemperatureLo | 1.3.6.1.4.1.7501.1.2.116.5.1.1.172 | INTEGER | read-only | Temperature of laser no.1 low warning threshold in steps of 0.1 Celsius Degrees. |
| INT oaLaser4TemperatureLoLo | 1.3.6.1.4.1.7501.1.2.116.5.1.1.171 | INTEGER | read-only | Temperature of laser no.1 low alarm threshold in steps of 0.1 Celsius Degrees. |
| INT oaLaser4TemperatureValue | 1.3.6.1.4.1.7501.1.2.116.5.1.1.173 | INTEGER | read-only | Temperature of laser no.1 in steps of 0.1 Celsius Degrees. |
| INT oaLaser4VoltageHi | 1.3.6.1.4.1.7501.1.2.116.5.1.1.179 | INTEGER | read-only | The supply voltage of laser no.1 high warning threshold in steps of 0.1 Volts. |
| INT oaLaser4VoltageHiHi | 1.3.6.1.4.1.7501.1.2.116.5.1.1.180 | INTEGER | read-only | The supply voltage of laser no.1 high alarm threshold in steps of 0.1 Volts. |
| INT oaLaser4VoltageLo | 1.3.6.1.4.1.7501.1.2.116.5.1.1.177 | INTEGER | read-only | The supply voltage of laser no.1 low warning threshold in steps of 0.1 Volts. |
| INT oaLaser4VoltageLoLo | 1.3.6.1.4.1.7501.1.2.116.5.1.1.176 | INTEGER | read-only | The supply voltage of laser no.1 low alarm threshold in steps of 0.1 Volts. |
| INT oaLaser4VoltageValue | 1.3.6.1.4.1.7501.1.2.116.5.1.1.178 | INTEGER | read-only | The supply voltage of laser no.1 in steps of 0.1 Volts. |
| INT oaLaser5CurrentRelHi | 1.3.6.1.4.1.7501.1.2.116.5.1.1.189 | INTEGER | read-only | Relative laser no.1 current high warning threshold in steps of 0.1%. |
| INT oaLaser5CurrentRelHiHi | 1.3.6.1.4.1.7501.1.2.116.5.1.1.190 | INTEGER | read-only | Relative laser no.1 current high alarm threshold in steps of 0.1%. |
| INT oaLaser5CurrentRelLo | 1.3.6.1.4.1.7501.1.2.116.5.1.1.187 | INTEGER | read-only | Relative laser no.1 current low warning threshold in steps of 0.1%. |
| INT oaLaser5CurrentRelLoLo | 1.3.6.1.4.1.7501.1.2.116.5.1.1.186 | INTEGER | read-only | Relative laser no.1 current low alarm threshold in steps of 0.1%. |
| INT oaLaser5CurrentRelValue | 1.3.6.1.4.1.7501.1.2.116.5.1.1.188 | INTEGER | read-only | The laser no.1 current relative to the current at begin of life in steps of 0.1%. |
| INT oaLaser5TecRelHi | 1.3.6.1.4.1.7501.1.2.116.5.1.1.194 | INTEGER | read-only | Thermo-electric-cooler current of laser no.1 high warning threshold in steps of 0.1%. |
| INT oaLaser5TecRelHiHi | 1.3.6.1.4.1.7501.1.2.116.5.1.1.195 | INTEGER | read-only | Thermo-electric-cooler current of laser no.1 high alarm threshold in steps of 0.1%. |
| INT oaLaser5TecRelLo | 1.3.6.1.4.1.7501.1.2.116.5.1.1.192 | INTEGER | read-only | Thermo-electric-cooler current of laser no.1 low warning threshold in steps of 0.1%. |
| INT oaLaser5TecRelLoLo | 1.3.6.1.4.1.7501.1.2.116.5.1.1.191 | INTEGER | read-only | Thermo-electric-cooler current of laser no.1 low alarm threshold in steps of 0.1%. |
| INT oaLaser5TecRelValue | 1.3.6.1.4.1.7501.1.2.116.5.1.1.193 | INTEGER | read-only | The thermo-electric-cooler current of laser no.1 relative to its maximum value in steps of 0.1%. |
| INT oaLaser5TemperatureHi | 1.3.6.1.4.1.7501.1.2.116.5.1.1.199 | INTEGER | read-only | Temperature of laser no.1 high warning threshold in steps of 0.1 Celsius Degrees. |
| INT oaLaser5TemperatureHiHi | 1.3.6.1.4.1.7501.1.2.116.5.1.1.200 | INTEGER | read-only | Temperature of laser no.1 high alarm threshold in steps of 0.1 Celsius Degrees. |
| INT oaLaser5TemperatureLo | 1.3.6.1.4.1.7501.1.2.116.5.1.1.197 | INTEGER | read-only | Temperature of laser no.1 low warning threshold in steps of 0.1 Celsius Degrees. |
| INT oaLaser5TemperatureLoLo | 1.3.6.1.4.1.7501.1.2.116.5.1.1.196 | INTEGER | read-only | Temperature of laser no.1 low alarm threshold in steps of 0.1 Celsius Degrees. |
| INT oaLaser5TemperatureValue | 1.3.6.1.4.1.7501.1.2.116.5.1.1.198 | INTEGER | read-only | Temperature of laser no.1 in steps of 0.1 Celsius Degrees. |
| INT oaLaser5VoltageHi | 1.3.6.1.4.1.7501.1.2.116.5.1.1.204 | INTEGER | read-only | The supply voltage of laser no.1 high warning threshold in steps of 0.1 Volts. |
| INT oaLaser5VoltageHiHi | 1.3.6.1.4.1.7501.1.2.116.5.1.1.205 | INTEGER | read-only | The supply voltage of laser no.1 high alarm threshold in steps of 0.1 Volts. |
| INT oaLaser5VoltageLo | 1.3.6.1.4.1.7501.1.2.116.5.1.1.202 | INTEGER | read-only | The supply voltage of laser no.1 low warning threshold in steps of 0.1 Volts. |
| INT oaLaser5VoltageLoLo | 1.3.6.1.4.1.7501.1.2.116.5.1.1.201 | INTEGER | read-only | The supply voltage of laser no.1 low alarm threshold in steps of 0.1 Volts. |
| INT oaLaser5VoltageValue | 1.3.6.1.4.1.7501.1.2.116.5.1.1.203 | INTEGER | read-only | The supply voltage of laser no.1 in steps of 0.1 Volts. |
| INT oaLaser6CurrentRelHi | 1.3.6.1.4.1.7501.1.2.116.5.1.1.214 | INTEGER | read-only | Relative laser no.1 current high warning threshold in steps of 0.1%. |
| INT oaLaser6CurrentRelHiHi | 1.3.6.1.4.1.7501.1.2.116.5.1.1.215 | INTEGER | read-only | Relative laser no.1 current high alarm threshold in steps of 0.1%. |
| INT oaLaser6CurrentRelLo | 1.3.6.1.4.1.7501.1.2.116.5.1.1.212 | INTEGER | read-only | Relative laser no.1 current low warning threshold in steps of 0.1%. |
| INT oaLaser6CurrentRelLoLo | 1.3.6.1.4.1.7501.1.2.116.5.1.1.211 | INTEGER | read-only | Relative laser no.1 current low alarm threshold in steps of 0.1%. |
| INT oaLaser6CurrentRelValue | 1.3.6.1.4.1.7501.1.2.116.5.1.1.213 | INTEGER | read-only | The laser no.1 current relative to the current at begin of life in steps of 0.1%. |
| INT oaLaser6TecRelHi | 1.3.6.1.4.1.7501.1.2.116.5.1.1.219 | INTEGER | read-only | Thermo-electric-cooler current of laser no.1 high warning threshold in steps of 0.1%. |
| INT oaLaser6TecRelHiHi | 1.3.6.1.4.1.7501.1.2.116.5.1.1.220 | INTEGER | read-only | Thermo-electric-cooler current of laser no.1 high alarm threshold in steps of 0.1%. |
| INT oaLaser6TecRelLo | 1.3.6.1.4.1.7501.1.2.116.5.1.1.217 | INTEGER | read-only | Thermo-electric-cooler current of laser no.1 low warning threshold in steps of 0.1%. |
| INT oaLaser6TecRelLoLo | 1.3.6.1.4.1.7501.1.2.116.5.1.1.216 | INTEGER | read-only | Thermo-electric-cooler current of laser no.1 low alarm threshold in steps of 0.1%. |
| INT oaLaser6TecRelValue | 1.3.6.1.4.1.7501.1.2.116.5.1.1.218 | INTEGER | read-only | The thermo-electric-cooler current of laser no.1 relative to its maximum value in steps of 0.1%. |
| INT oaLaser6TemperatureHi | 1.3.6.1.4.1.7501.1.2.116.5.1.1.224 | INTEGER | read-only | Temperature of laser no.1 high warning threshold in steps of 0.1 Celsius Degrees. |
| INT oaLaser6TemperatureHiHi | 1.3.6.1.4.1.7501.1.2.116.5.1.1.225 | INTEGER | read-only | Temperature of laser no.1 high alarm threshold in steps of 0.1 Celsius Degrees. |
| INT oaLaser6TemperatureLo | 1.3.6.1.4.1.7501.1.2.116.5.1.1.222 | INTEGER | read-only | Temperature of laser no.1 low warning threshold in steps of 0.1 Celsius Degrees. |
| INT oaLaser6TemperatureLoLo | 1.3.6.1.4.1.7501.1.2.116.5.1.1.221 | INTEGER | read-only | Temperature of laser no.1 low alarm threshold in steps of 0.1 Celsius Degrees. |
| INT oaLaser6TemperatureValue | 1.3.6.1.4.1.7501.1.2.116.5.1.1.223 | INTEGER | read-only | Temperature of laser no.1 in steps of 0.1 Celsius Degrees. |
| INT oaLaser6VoltageHi | 1.3.6.1.4.1.7501.1.2.116.5.1.1.229 | INTEGER | read-only | The supply voltage of laser no.1 high warning threshold in steps of 0.1 Volts. |
| INT oaLaser6VoltageHiHi | 1.3.6.1.4.1.7501.1.2.116.5.1.1.230 | INTEGER | read-only | The supply voltage of laser no.1 high alarm threshold in steps of 0.1 Volts. |
| INT oaLaser6VoltageLo | 1.3.6.1.4.1.7501.1.2.116.5.1.1.227 | INTEGER | read-only | The supply voltage of laser no.1 low warning threshold in steps of 0.1 Volts. |
| INT oaLaser6VoltageLoLo | 1.3.6.1.4.1.7501.1.2.116.5.1.1.226 | INTEGER | read-only | The supply voltage of laser no.1 low alarm threshold in steps of 0.1 Volts. |
| INT oaLaser6VoltageValue | 1.3.6.1.4.1.7501.1.2.116.5.1.1.228 | INTEGER | read-only | The supply voltage of laser no.1 in steps of 0.1 Volts. |
| oaMeasuringValues | 1.3.6.1.4.1.7501.1.2.116.5 | |||
| oaMeasuringValuesEntry | 1.3.6.1.4.1.7501.1.2.116.5.1.1 | not-accessible | Common-Values for a module. | |
| oaMeasuringValuesTable | 1.3.6.1.4.1.7501.1.2.116.5.1 | not-accessible | ||
| NES oaNESlot | 1.3.6.1.4.1.7501.1.2.116.1.2.1.1 | NESlotValue | read-only | The slot number of the chassis for which this entry contains management information. |
| INT oaOutputPwrOrGainHi | 1.3.6.1.4.1.7501.1.2.116.5.1.1.14 | INTEGER | read-write | Output power (or gain) high warning threshold in steps of 0.1dB(m). See oaConfigRegulationMode variable too |
| INT oaOutputPwrOrGainHiHi | 1.3.6.1.4.1.7501.1.2.116.5.1.1.15 | INTEGER | read-write | Output power (or gain) high alarm threshold in steps of 0.1dB(m). See oaConfigRegulationMode variable too |
| INT oaOutputPwrOrGainLo | 1.3.6.1.4.1.7501.1.2.116.5.1.1.12 | INTEGER | read-write | Output power (or gain) low warning threshold in steps of 0.1dB(m). See oaConfigRegulationMode variable too |
| INT oaOutputPwrOrGainLoLo | 1.3.6.1.4.1.7501.1.2.116.5.1.1.11 | INTEGER | read-write | Output power (or gain) low alarm threshold in steps of 0.1dB(m). See oaConfigRegulationMode variable too |
| INT oaOutputPwrOrGainValue | 1.3.6.1.4.1.7501.1.2.116.5.1.1.13 | INTEGER | read-only | Output power (or gain) in steps of 0.1dB(m). See oaConfigRegulationMode variable too |
| INT oaReturnLossHi | 1.3.6.1.4.1.7501.1.2.116.5.1.1.19 | INTEGER | read-write | ReturnLoss high warning threshold in steps of 0.1 dB. |
| INT oaReturnLossHiHi | 1.3.6.1.4.1.7501.1.2.116.5.1.1.20 | INTEGER | read-write | ReturnLoss high alarm threshold in steps of 0.1 dB. |
| INT oaReturnLossLo | 1.3.6.1.4.1.7501.1.2.116.5.1.1.17 | INTEGER | read-write | ReturnLoss low warning threshold in steps of 0.1 dB. |
| INT oaReturnLossLoLo | 1.3.6.1.4.1.7501.1.2.116.5.1.1.16 | INTEGER | read-write | ReturnLoss low alarm threshold in steps of 0.1 dB. |
| INT oaReturnLossValue | 1.3.6.1.4.1.7501.1.2.116.5.1.1.18 | INTEGER | read-only | ReturnLoss in steps of 0.1 dB. |
| oaStates | 1.3.6.1.4.1.7501.1.2.116.2 | |||
| PER oaStatesBootloader | 1.3.6.1.4.1.7501.1.2.116.2.1.1.1 | PerceivedSeverityValue | read-only | The device is running in bootloader mode without a legal application software. |
| PER oaStatesCommLoss | 1.3.6.1.4.1.7501.1.2.116.2.1.1.2 | PerceivedSeverityValue | read-only | The NEC has lost the connection to the device. Reason may be a removed or defective device. Note that this state is set by the NEC and not by the device |
| oaStatesEntry | 1.3.6.1.4.1.7501.1.2.116.2.1.1 | not-accessible | Alarms for a module. | |
| PER oaStatesFanLeft | 1.3.6.1.4.1.7501.1.2.116.2.1.1.27 | PerceivedSeverityValue | read-only | The left (looking from front) fan unit fails. Only valid for devices in 19 inch housing |
| PER oaStatesFanRight | 1.3.6.1.4.1.7501.1.2.116.2.1.1.28 | PerceivedSeverityValue | read-only | The right (looking from front) fan unit fails. Only valid for devices in 19 inch housing |
| PER oaStatesInitializing | 1.3.6.1.4.1.7501.1.2.116.2.1.1.3 | PerceivedSeverityValue | read-only | The device is initializing |
| PER oaStatesInputPwrHigh | 1.3.6.1.4.1.7501.1.2.116.2.1.1.9 | PerceivedSeverityValue | read-only | Optical input power high |
| PER oaStatesInputPwrLow | 1.3.6.1.4.1.7501.1.2.116.2.1.1.8 | PerceivedSeverityValue | read-only | Optical input power low |
| PER oaStatesInputVoltageHigh | 1.3.6.1.4.1.7501.1.2.116.2.1.1.16 | PerceivedSeverityValue | read-only | Input supply voltage high |
| PER oaStatesInputVoltageLow | 1.3.6.1.4.1.7501.1.2.116.2.1.1.15 | PerceivedSeverityValue | read-only | Input supply voltage low |
| PER oaStatesInternalVoltageHigh | 1.3.6.1.4.1.7501.1.2.116.2.1.1.30 | PerceivedSeverityValue | read-only | One (or more) internal voltages high |
| PER oaStatesInternalVoltageLow | 1.3.6.1.4.1.7501.1.2.116.2.1.1.29 | PerceivedSeverityValue | read-only | One (or more) internal voltages low |
| PER oaStatesLaserCurrentHigh | 1.3.6.1.4.1.7501.1.2.116.2.1.1.32 | PerceivedSeverityValue | read-only | Laser current of one (or more) lasers high (laser is aging) |
| PER oaStatesLaserCurrentLow | 1.3.6.1.4.1.7501.1.2.116.2.1.1.31 | PerceivedSeverityValue | read-only | Laser current of one (or more) lasers low |
| PER oaStatesLaserShutdown | 1.3.6.1.4.1.7501.1.2.116.2.1.1.4 | PerceivedSeverityValue | read-only | Lasers are shutdown, no optical output |
| PER oaStatesLaserTempHigh | 1.3.6.1.4.1.7501.1.2.116.2.1.1.36 | PerceivedSeverityValue | read-only | Laser temperature of one (or more) lasers high |
| PER oaStatesLaserTempLow | 1.3.6.1.4.1.7501.1.2.116.2.1.1.35 | PerceivedSeverityValue | read-only | Laser temperature of one (or more) lasers low |
| PER oaStatesLaserVoltageHigh | 1.3.6.1.4.1.7501.1.2.116.2.1.1.38 | PerceivedSeverityValue | read-only | Laser voltage supply of one (or more) lasers high |
| PER oaStatesLaserVoltageLow | 1.3.6.1.4.1.7501.1.2.116.2.1.1.37 | PerceivedSeverityValue | read-only | Laser voltage supply of one (or more) lasers low |
| PER oaStatesOutputPwrOrGainHigh | 1.3.6.1.4.1.7501.1.2.116.2.1.1.11 | PerceivedSeverityValue | read-only | Optical output power (or gain) high |
| PER oaStatesOutputPwrOrGainLow | 1.3.6.1.4.1.7501.1.2.116.2.1.1.10 | PerceivedSeverityValue | read-only | Optical output power (or gain) low |
| PER oaStatesPowerSupplyLeft | 1.3.6.1.4.1.7501.1.2.116.2.1.1.25 | PerceivedSeverityValue | read-only | The left (looking from front) power supply unit fails. Only valid for devices in 19 inch housing |
| PER oaStatesPowerSupplyRight | 1.3.6.1.4.1.7501.1.2.116.2.1.1.26 | PerceivedSeverityValue | read-only | The right (looking from front) power supply unit fails. Only valid for devices in 19 inch housing |
| PER oaStatesRamanBackReflectionRatio | 1.3.6.1.4.1.7501.1.2.116.2.1.1.39 | PerceivedSeverityValue | read-only | Raman amplifier back reflection ratio high alarm Only used if oaDisplayAmplifierIsRamanType == true(1) |
| PER oaStatesRamanOscSignalMissing | 1.3.6.1.4.1.7501.1.2.116.2.1.1.40 | PerceivedSeverityValue | read-only | Raman amplifier oscillator signal missing alarm Only used if oaDisplayAmplifierIsRamanType == true(1) |
| PER oaStatesRedundancySwitch | 1.3.6.1.4.1.7501.1.2.116.2.1.1.14 | PerceivedSeverityValue | read-only | This (redundant) device has been activated (redundancy switchover) |
| PER oaStatesReturnLossHigh | 1.3.6.1.4.1.7501.1.2.116.2.1.1.13 | PerceivedSeverityValue | read-only | Return loss high |
| PER oaStatesReturnLossLow | 1.3.6.1.4.1.7501.1.2.116.2.1.1.12 | PerceivedSeverityValue | read-only | Return loss low |
| PER oaStatesSystem | 1.3.6.1.4.1.7501.1.2.116.2.1.1.7 | PerceivedSeverityValue | read-only | Internal error occured |
| oaStatesTable | 1.3.6.1.4.1.7501.1.2.116.2.1 | not-accessible | ||
| PER oaStatesTecCurrentHigh | 1.3.6.1.4.1.7501.1.2.116.2.1.1.34 | PerceivedSeverityValue | read-only | Laser TEC current limit of one (or more) lasers reached (cooling limit) |
| PER oaStatesTecCurrentLow | 1.3.6.1.4.1.7501.1.2.116.2.1.1.33 | PerceivedSeverityValue | read-only | Laser TEC current limit of one (or more) lasers reached (heating limit) |
| PER oaStatesTemperatureHigh | 1.3.6.1.4.1.7501.1.2.116.2.1.1.6 | PerceivedSeverityValue | read-only | Device internal temperature high |
| PER oaStatesTemperatureLow | 1.3.6.1.4.1.7501.1.2.116.2.1.1.5 | PerceivedSeverityValue | read-only | Device internal temperature low |
| INT oaTemperatureHi | 1.3.6.1.4.1.7501.1.2.116.5.1.1.4 | INTEGER | read-only | The module temperature high warning threshold in steps of 0.1 celsius degrees. |
| INT oaTemperatureHiHi | 1.3.6.1.4.1.7501.1.2.116.5.1.1.5 | INTEGER | read-only | The module temperature high alarm threshold in steps of 0.1 celsius degrees. |
| INT oaTemperatureLo | 1.3.6.1.4.1.7501.1.2.116.5.1.1.2 | INTEGER | read-only | The module temperature low warning threshold in steps of 0.1 celsius degrees. |
| INT oaTemperatureLoLo | 1.3.6.1.4.1.7501.1.2.116.5.1.1.1 | INTEGER | read-only | The module temperature low alarm threshold in steps of 0.1 celsius degrees. |
| INT oaTemperatureValue | 1.3.6.1.4.1.7501.1.2.116.5.1.1.3 | INTEGER | read-only | The module temperature in steps of 0.1 celsius degrees. |
RFC description
Manages BKtel high-power optical amplifiers (OA) including configuration, monitoring, and raman-type amplifier support.
Start monitoring BKTEL HFC-862 optical node equipment (HFC cable plant) (legacy) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.