COLUBRIS-PUBLIC-ACCESS-RETENTION-MIB

All MIBs › COLUBRIS-PUBLIC-ACCESS-RETENTION-MIB

Organization: Colubris Networks, Inc.

Last Updated: 2004-10-28

Category: Vendor: HP/HPE, Wireless and WLAN

Description: Manages subscriber session retention and data logging for Colubris/HP public hotspot access systems.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is COLUBRIS-PUBLIC-ACCESS-RETENTION-MIB?

COLUBRIS-PUBLIC-ACCESS-RETENTION-MIB is a Colubris Networks (later HP) proprietary MIB retaining historical public-access (captive-portal) session data on Colubris wireless gateways. Its objects cover a max session count/retention-time setting and a session table (state, username, start time, duration, station IP address, packets/bytes sent/received, SSID), plus periodic-statistics settings and a period table (start/stop time, highest/total session count) with a max-count-reached notification. As a status/performance MIB it lets an administrator review historical captive-portal session usage and get alerted when session retention capacity is reached. It is deployed on Colubris Networks (HP) wireless gateways with public-access captive portal. Engineers can download the COLUBRIS-PUBLIC-ACCESS-RETENTION-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in COLUBRIS-PUBLIC-ACCESS-RETENTION-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Colubris Networks (HP) wireless gateways (public-access captive portal)

Monitoring Examples

An administrator reviews publicAccessRetentionSessionTable to investigate a specific user's historical captive-portal session duration and data usage on a Colubris wireless gateway.

What Can Be Monitored

historical captive-portal session usage

Imported Objects

From COLUBRIS-SMI

colubrisMgmtV2

OBJECT-IDENTITY

From COLUBRIS-TC

ColubrisSSIDOrNone

From SNMPv2-CONF

MODULE-COMPLIANCE
NOTIFICATION-GROUP
OBJECT-GROUP

From SNMPv2-SMI

Counter32
Counter64
Integer32
IpAddress
MODULE-IDENTITY
NOTIFICATION-TYPE
OBJECT-TYPE
Unsigned32

From SNMPv2-TC

DateAndTime

How to Use in IPNetwork Monitor

Example using publicAccessRetentionSessionDuration OID:

Select a Colubris/HP wireless gateway (hotspot, legacy) as the target host to create a monitor — the SNMP service should be up and running on it. Click New Monitor, then check SNMP Custom on the Favorites tab, click Next, and confirm the host. On the next page, click Select... to open the built-in SNMP MIB Browser and type publicAccessRetentionSessionDuration into the Find box to locate it in the OID tree, selecting the specific row/instance you want to monitor since this is a table column, then select it and click OK. Indicates how long the user's session has been active. On the monitor's Main parameters page you can set the target's SNMP port (default 161), credentials, polling interval, and other settings — see the SNMP Monitor help for details. On the State conditions and Alerting tabs, configure when the monitor should change state and trigger an alert; since this is a Counter32-type OID, Value bounds is the most useful condition here — trigger an alert if the counter increases sharply between polls relative to its normal baseline (in seconds), since an unexpected spike often reflects a real change in traffic or activity. Click Finish to create the monitor; you can adjust any parameter later.

OIDs

OID symbolic	OID numeric	Type	Access	Description
colubrisPublicAccessRetentionMIB	1.3.6.1.4.1.8744.5.15			Colubris Networks Public Access MIB.
colubrisPublicAccessRetentionMIBObjects	1.3.6.1.4.1.8744.5.15.1
publicAccessRetentionSessionsGroup	1.3.6.1.4.1.8744.5.15.1.1
U32 publicAccessRetentionSessionsMaxCount	1.3.6.1.4.1.8744.5.15.1.1.1	Unsigned32	read-write	The maximum number of entries inside the publicAccessRetentionSessionTable. The maximum value for this is 250% the maximum number of users configured inside the product.
I32 publicAccessRetentionSessionsMaxTime	1.3.6.1.4.1.8744.5.15.1.1.2	Integer32	read-write	The maximum number of seconds for an entry to remain in the table. When expired the session's state changes to Unassigned.
publicAccessRetentionSessionTable	1.3.6.1.4.1.8744.5.15.1.1.3		not-accessible	A table containing information about existing or past authenticated user sessions.
publicAccessRetentionSessionEntry	1.3.6.1.4.1.8744.5.15.1.1.3.1		not-accessible	Information about a particular authenticated user session. publicAccessRetentionSessionIndex - Uniquely identifies a session in the table.
I32 publicAccessRetentionSessionIndex	1.3.6.1.4.1.8744.5.15.1.1.3.1.1	Integer32	not-accessible	Index of a session in the publicAccessRetentionSessionTable.
INT publicAccessRetentionSessionState	1.3.6.1.4.1.8744.5.15.1.1.3.1.2	INTEGER	read-only	Indicates the current state of the user's session.
OCT publicAccessRetentionSessionUserName	1.3.6.1.4.1.8744.5.15.1.1.3.1.3	OCTET STRING	read-only	Indicates the last username used for RADIUS authentication.
DAT publicAccessRetentionSessionStartTime	1.3.6.1.4.1.8744.5.15.1.1.3.1.4	DateAndTime	read-only	Indicates when this user session was started.
C32 publicAccessRetentionSessionDurationEx	1.3.6.1.4.1.8744.5.15.1.1.3.1.5	Counter32	read-only	Indicates how long the user's session has been active. When this counter reaches its maximum value, it wraps around and starts increasing again from zero.
IP publicAccessRetentionSessionStationIpAddress	1.3.6.1.4.1.8744.5.15.1.1.3.1.6	IpAddress	read-only	Indicates the user's IP address.
C32 publicAccessRetentionSessionPacketsSent	1.3.6.1.4.1.8744.5.15.1.1.3.1.7	Counter32	read-only	Indicates the total number of IP packets sent by the user. When this counter reaches its maximum value, it wraps around and starts increasing again from zero.
C32 publicAccessRetentionSessionPacketsReceived	1.3.6.1.4.1.8744.5.15.1.1.3.1.8	Counter32	read-only	Indicates the total number of IP packets received by the user. When this counter reaches its maximum value, it wraps around and starts increasing again from zero.
C64 publicAccessRetentionSessionBytesSent	1.3.6.1.4.1.8744.5.15.1.1.3.1.9	Counter64	read-only	Indicates the total number of bytes sent by the user. When this counter reaches its maximum value, it wraps around and starts increasing again from zero.
C64 publicAccessRetentionSessionBytesReceived	1.3.6.1.4.1.8744.5.15.1.1.3.1.10	Counter64	read-only	Indicates the total number of bytes received by the user. When this counter reaches its maximum value, it wraps around and starts increasing again from zero.
COL publicAccessRetentionSessionSSID	1.3.6.1.4.1.8744.5.15.1.1.3.1.11	ColubrisSSIDOrNone	read-only	Indicates the user's Access Point SSID (ONLY when Location-aware is enabled and properly configured). If this information is not available, a zero-length string will be returned.
publicAccessRetentionPeriodicStatsGroup	1.3.6.1.4.1.8744.5.15.1.2
I32 publicAccessRetentionPeriodicStatsMaxCount	1.3.6.1.4.1.8744.5.15.1.2.1	Integer32	read-write	Specifies the maximum number of periods to keep inside the table.
I32 publicAccessRetentionPeriodicStatsDuration	1.3.6.1.4.1.8744.5.15.1.2.2	Integer32	read-write	Specifies the amount of time for a period of an entry inside the table. Changing the value will erase the table contents.
publicAccessRetentionPeriodTable	1.3.6.1.4.1.8744.5.15.1.2.3		not-accessible	A table containing statistics on the number of authentication user's sessions pending and terminated.
publicAccessRetentionPeriodEntry	1.3.6.1.4.1.8744.5.15.1.2.3.1		not-accessible	Statistics information about the number of authenticated user sessions in a given period of time.
I32 publicAccessRetentionPeriodIndex	1.3.6.1.4.1.8744.5.15.1.2.3.1.1	Integer32	not-accessible	Index of a statistics period.
DAT publicAccessRetentionPeriodStartTime	1.3.6.1.4.1.8744.5.15.1.2.3.1.2	DateAndTime	read-only	Indicates the start time for the statistical period. If zero, then the period does not contain valid information.
DAT publicAccessRetentionPeriodStopTime	1.3.6.1.4.1.8744.5.15.1.2.3.1.3	DateAndTime	read-only	Indicates the stop time for the statistical period. If zero, the period is not yet terminated.
C32 publicAccessRetentionPeriodHighestSessionCount	1.3.6.1.4.1.8744.5.15.1.2.3.1.4	Counter32	read-only	Indicates the highest number of simultaneous authenticated user sessions within this time period.
C32 publicAccessRetentionPeriodTotalSessionCount	1.3.6.1.4.1.8744.5.15.1.2.3.1.5	Counter32	read-only	Indicates the total number of authenticated user sessions within this time period.
publicAccessRetentionMIBNotificationPrefix	1.3.6.1.4.1.8744.5.15.2
publicAccessRetentionMIBNotifications	1.3.6.1.4.1.8744.5.15.2.0
NTF publicAccessRetentionSessionMaxCountReachedTrap	1.3.6.1.4.1.8744.5.15.2.0.1			This notification is sent whenever the number of session exceed the value of publicAccessRetentionSessionsMaxCount.
colubrisPublicAccessRetentionMIBConformance	1.3.6.1.4.1.8744.5.15.3
colubrisPublicAccessRetentionMIBCompliances	1.3.6.1.4.1.8744.5.15.3.1
colubrisPublicAccessRetentionMIBCompliance	1.3.6.1.4.1.8744.5.15.3.1.1			The compliance statement for entities which implement the Colubris Public Access Retention MIB.
colubrisPublicAccessRetentionMIBGroups	1.3.6.1.4.1.8744.5.15.3.2
colubrisPublicAccessRetentionSessionsMIBGroup	1.3.6.1.4.1.8744.5.15.3.2.1			A collection of objects providing the Public Access Retention Sessions MIB capability.
colubrisPublicAccessRetentionPeriodicStatsMIBGroup	1.3.6.1.4.1.8744.5.15.3.2.2			A collection of objects providing the Public Access Retention PeriodicStats MIB capability.
colubrisPublicAccessRetentionNotificationGroup	1.3.6.1.4.1.8744.5.15.3.2.3			A collection of supported notifications.

RFC description

Vendor-private MIB for Colubris wireless access points; defines objects for managing public access and session retention policies.

Start monitoring Colubris/HP wireless gateway (hotspot, legacy) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download COLUBRIS-PUBLIC-ACCESS-RETENTION-MIB