COLUBRIS-MAINTENANCE-MIB

All MIBs › COLUBRIS-MAINTENANCE-MIB

Organization: Colubris Networks, Inc.

Last Updated: 2009-02-06

Category: Vendor: HP/HPE, Wireless and WLAN

Description: Provides firmware upgrade, reboot, and configuration backup operations for Colubris/HP wireless devices.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is COLUBRIS-MAINTENANCE-MIB?

This Colubris (HP) MIB provides remote maintenance operations for access points, covering scheduled/on-demand firmware updates and configuration backup/restore. It exposes configuration objects for scheduling periodic firmware or config updates (day, time, source location) plus status/notification objects reporting the outcome of an update operation. Its monitoring value is centered on software version and update-process status: an admin can confirm whether a firmware update completed successfully, check firmwareUpdateInfo/firmwareUpdateStatus to see current version or failure reason, and verify periodic configuration backups are actually occurring on schedule. It has no significant technical dependency on other MIBs beyond Colubris's own device family. It's deployed on Colubris/HP access points in managed multi-site WLAN deployments where firmware/config lifecycle needs to be centrally tracked. Engineers can download the COLUBRIS-MAINTENANCE-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in COLUBRIS-MAINTENANCE-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Colubris/HP wireless access point

Monitoring Examples

An admin sets firmwarePeriodicUpdate with firmwareUpdateDay/firmwareUpdateTime and firmwareUpdateLocation pointing to a TFTP/HTTP server, then polls firmwareUpdateStatus after the scheduled window to confirm the update succeeded rather than failing partway through, which would leave the AP on an old firmwareUpdateInfo version. Similarly, configurationPeriodicUpdate with configurationUpdateDay/configurationUpdateTime lets the admin verify that automated config backups to configurationUpdateLocation are running as scheduled, catching a silent failure before it's needed for disaster recovery.

What Can Be Monitored

firmware update schedule and status
current firmware version
configuration backup schedule and status
update/backup source location

Imported Objects

From COLUBRIS-SMI

colubrisMgmtV2

OBJECT-IDENTITY

From COLUBRIS-SYSTEM-MIB

systemConfigurationVersion	OBJECT-TYPE
systemFirmwareRevision	OBJECT-TYPE

From COLUBRIS-TC

ColubrisNotificationEnable

From SNMPv2-CONF

MODULE-COMPLIANCE
NOTIFICATION-GROUP
OBJECT-GROUP

From SNMPv2-SMI

MODULE-IDENTITY
NOTIFICATION-TYPE
OBJECT-TYPE

From SNMPv2-TC

DisplayString
TruthValue

OIDs

OID symbolic	OID numeric	Type	Access	Description
colubrisMaintenanceMIB	1.3.6.1.4.1.8744.5.2			Colubris Networks Maintenance MIB.
colubrisMaintenanceMIBObjects	1.3.6.1.4.1.8744.5.2.1
firmwareUpdate	1.3.6.1.4.1.8744.5.2.1.1
T/F firmwarePeriodicUpdate	1.3.6.1.4.1.8744.5.2.1.1.1	TruthValue	read-write	Specifies if firmware updates are automatically triggered on a periodic basis or not. 'true': Automatically update the firmware based on the information specified in the firmwareUpdateDay and firmwareUpdateTime attributes. 'false': No firmware update is triggered unless a request is specifically issued using the firmwareUpdateInitiate attribute.
INT firmwareUpdateDay	1.3.6.1.4.1.8744.5.2.1.1.2	INTEGER	read-write	When firmwarePeriodicUpdate is set to true, this attribute specifies the day that automatic updates will occur.
OCT firmwareUpdateTime	1.3.6.1.4.1.8744.5.2.1.1.3	OCTET STRING	read-write	When firmwarePeriodicUpdate is set to true, this attribute specifies the time of the day that automatic updates will occur. Specify the time in hours (00-23) and minutes (00-59) in the format HH:MM. The ':' character is mandatory between the fields.
STR firmwareUpdateLocation	1.3.6.1.4.1.8744.5.2.1.1.4	DisplayString	read-write	Specifies the URL where the new firmware file is located. This is used when the firmware update is triggered manually or automatically on a periodic basis.
INT firmwareUpdateInitiate	1.3.6.1.4.1.8744.5.2.1.1.5	INTEGER	read-write	Triggers a firmware update using the firmware specified in the firmwareUpdateLocation attribute. Reading this attribute always returns 'idle'.
COL firmwareUpdateNotificationEnabled	1.3.6.1.4.1.8744.5.2.1.1.6	ColubrisNotificationEnable	read-write	Specifies if firmwareUpdateNotification notifications are generated.
STR firmwareUpdateInfo	1.3.6.1.4.1.8744.5.2.1.1.7	DisplayString	read-only	Contains various information about the firmware update and is used with firmware update notifications to provide more detailed information.
INT firmwareUpdateStatus	1.3.6.1.4.1.8744.5.2.1.1.8	INTEGER	read-only	Contains the status of the current or last firmware download. A Textual error message is available in firmwareUpdateInfo.
configurationUpdate	1.3.6.1.4.1.8744.5.2.1.2
T/F configurationPeriodicUpdate	1.3.6.1.4.1.8744.5.2.1.2.1	TruthValue	read-write	Specifies if configuration file updates are automatically triggered on a periodic basis or not. 'true': Automatically update the configuration file based on the information specified in the configurationUpdateDay and configurationUpdateTime attributes. 'false': No configuration file update is triggered unless a request is specifically issued using the configurationUpdateInitiate attribute.
INT configurationUpdateDay	1.3.6.1.4.1.8744.5.2.1.2.2	INTEGER	read-write	When configurationPeriodicUpdate is set to true, this attribute specifies the day that automatic updates will occur.
OCT configurationUpdateTime	1.3.6.1.4.1.8744.5.2.1.2.3	OCTET STRING	read-write	When configurationPeriodicUpdateis set to true, this attribute specifies the time of the day for an automatic configuration file update. Specify the time in hours (00-23) and minutes (00-59) in the format HH:MM. The ':' character is mandatory between the fields.
STR configurationUpdateLocation	1.3.6.1.4.1.8744.5.2.1.2.4	DisplayString	read-write	Specifies the URL where the new configuration file is located. This is used when the update is triggered manually or automatically on a periodic basis.
INT configurationUpdateInitiate	1.3.6.1.4.1.8744.5.2.1.2.5	INTEGER	read-write	Triggers a configuration file update using the configuration file specified in the configurationUpdateLocation attribute. Reading this attribute always returns 'idle'.
INT configurationUpdateOperation	1.3.6.1.4.1.8744.5.2.1.2.6	INTEGER	read-write	Specifies the operation that is performed on the configuration file. 'backup': Saves the current device configuration into the file specified in the configurationUpdateLocation attribute. 'restore': Loads the file specified in the configurationUpdateLocation attribute into the device.
COL configurationUpdateNotificationEnabled	1.3.6.1.4.1.8744.5.2.1.2.7	ColubrisNotificationEnable	read-write	Specifies if configurationUpdateNotification notifications are generated.
COL configurationLocalUpdateNotificationEnabled	1.3.6.1.4.1.8744.5.2.1.2.8	ColubrisNotificationEnable	read-write	Specifies if configurationLocalUpdateNotification notifications are generated.
STR configurationUpdateInfo	1.3.6.1.4.1.8744.5.2.1.2.9	DisplayString	read-only	Contains various information about the configuration update and is used with configuration update notifications to provide more detailed information.
INT configurationFactoryDefaults	1.3.6.1.4.1.8744.5.2.1.2.10	INTEGER	read-write	Resets the device configuration to Factory Default. Important: This will reset the community names and shut down all connections. Reading this object will always return 'idle'.
INT configurationRestart	1.3.6.1.4.1.8744.5.2.1.2.11	INTEGER	read-write	Restarts the device. Important: This will shut down all connections. Reading this object will always return 'idle'.
INT configurationUpdateStatus	1.3.6.1.4.1.8744.5.2.1.2.12	INTEGER	read-only	Contains the status of the current or last configuration transfer (backup or restore. A textual error message is available in configurationUpdateInfo.
certificate	1.3.6.1.4.1.8744.5.2.1.3
COL certificateAboutToExpireNotificationEnabled	1.3.6.1.4.1.8744.5.2.1.3.1	ColubrisNotificationEnable	read-write	Specifies if certificateAboutToExpireNotification notifications are generated.
COL certificateExpiredNotificationEnabled	1.3.6.1.4.1.8744.5.2.1.3.2	ColubrisNotificationEnable	read-write	Specifies if certificateExpiredNotification notifications are generated.
STR certificateExpiryDate	1.3.6.1.4.1.8744.5.2.1.3.3	DisplayString	read-only	Indicates the current expiry date of the certificate.
colubrisMaintenanceMIBNotificationPrefix	1.3.6.1.4.1.8744.5.2.2
colubrisMaintenanceMIBNotifications	1.3.6.1.4.1.8744.5.2.2.0
NTF configurationUpdateNotification	1.3.6.1.4.1.8744.5.2.2.0.1			Sent when a configuration update was attempted from a remote server.
NTF configurationLocalUpdateNotification	1.3.6.1.4.1.8744.5.2.2.0.2			Sent whenever the configuration changes.
NTF certificateAboutToExpireNotification	1.3.6.1.4.1.8744.5.2.2.0.3			Sent when a certificate is about to expire.
NTF certificateExpiredNotification	1.3.6.1.4.1.8744.5.2.2.0.4			Sent when a certificate has expired.
NTF firmwareUpdateNotification	1.3.6.1.4.1.8744.5.2.2.0.5			Sent when a firmware update was attempted from a remote server.
colubrisMaintenanceMIBConformance	1.3.6.1.4.1.8744.5.2.3
colubrisMaintenanceMIBCompliances	1.3.6.1.4.1.8744.5.2.3.1
colubrisMaintenanceMIBCompliance	1.3.6.1.4.1.8744.5.2.3.1.1			The compliance statement for entities which implement the Colubris Maintenance MIB.
colubrisMaintenanceMIBGroups	1.3.6.1.4.1.8744.5.2.3.2
colubrisMaintenanceMIBGroup	1.3.6.1.4.1.8744.5.2.3.2.1			A collection of objects providing the Maintenance MIB capability.
colubrisMaintenanceNotificationGroup	1.3.6.1.4.1.8744.5.2.3.2.2			A collection of supported notifications

RFC description

Handles firmware updates, configuration updates, and certificate management for Colubris wireless systems.

Start monitoring Colubris/HP wireless access point (legacy) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download COLUBRIS-MAINTENANCE-MIB

What Is COLUBRIS-MAINTENANCE-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description