All MIBs › CLJ8500-MIB › prtmarkersupplieslevel
prtmarkersupplieslevel
Module: CLJ8500-MIB
OID (symbolic): CLJ8500-MIB::prtmarkersupplieslevel
OID (numeric): 1.3.6.1.4.1.11.2.3.9.4.2.2.11.1.1.9
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-only
Description: The current level if this supply is a container; the remaining space if this supply is a receptacle. If this supply container/receptacle can reliably sense this value, the value is reported by the printer and is read-only; otherwise, the value may be written (by a Remote Control Panel or a Management Application). The value (-1) means other and specifically indicates that the sub-unit places no restrictions on this parameter. The value (-2) means unknown. A value of (-3) means that the printer knows that there is some supply/remaining space, respectively. Additional information: CLJ8500 detects three states for the toner: Above the 'LOW' threshold will be reported as -3. Between the 'LOW' and 'OUT' thresholds will be reported as -2. At the 'OUT' threshold will be reported as 0. The other consumables will report -2.
What is prtmarkersupplieslevel?
This object reports the current fill level of a supply container, such as remaining toner, or the remaining free space of a receptacle, such as a waste-toner bin, in the units from prtMarkerSuppliesSupplyUnit. This is the value an admin monitors most directly for consumables management, since it drives low-toner or waste-full alerting well before the printer actually stops working. For example, a toner cartridge whose level drops below 10 percent of its prtMarkerSuppliesMaxCapacity would prompt the admin to order a replacement before it runs out mid-job.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.11.2.3.9.4.2.2.11.1.1.9 snmpwalk -v2c -c public <target> CLJ8500-MIB::prtmarkersupplieslevel
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.11.2.3.9.4.2.2.11.1.1.9.1 snmpget -v2c -c public <target> CLJ8500-MIB::prtmarkersupplieslevel.1
Start monitoring HP Color LaserJet 8500 series printer with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CLJ8500-MIB::prtmarkersupplieslevel OID value, configure state conditions and alerts, and monitor any HP Color LaserJet 8500 series printer from a single console.
OID Breakdown
Upper-level ancestors (6 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.11 | hp | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2 | nm | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2.3 | hpsystem | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2.3.9 | net_peripheral | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2.3.9.4 | netdm | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2.3.9.4.2 | dm | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2.3.9.4.2.2 | printmib | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2.3.9.4.2.2.11 | prtMarkerSupplies | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2.3.9.4.2.2.11.1 | prtMarkerSuppliesTable | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2.3.9.4.2.2.11.1.1 | prtMarkerSuppliesEntry | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2.3.9.4.2.2.11.1.1.9 | prtmarkersupplieslevel | CLJ8500-MIB |