All MIBs › CLJ8500-MIB › prtinputdefaultindex
prtinputdefaultindex
Module: CLJ8500-MIB
OID (symbolic): CLJ8500-MIB::prtinputdefaultindex
OID (numeric): 1.3.6.1.4.1.11.2.3.9.4.2.2.5.1.1.6
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-only
Description: The value of prtInputIndex corresponding to the default input sub-unit: that is, this object selects the default source of input media. This value shall be -1 if there is no default input subunit specified for the printer as a whole. In this case, the actual default input subunit may be specified by means outside the scope of this MIB, such as by each interpreter in a printer with multiple interpreters. Additional information: The default input tray is determined by the printer based on DEFAULT-MEDIA-SIZE and DEFAULT-MEDIA-NAME. If multiple trays have qualifying media, tray 1 is selected first, then the non-empty tray with the highest capacity is selected; trays of equal capacity are selected by lower tray number. Trays 1-3 refer to the printer's trays that are so labeled. Tray 4 is the first tray of the first external input paper handling device.
What is prtinputdefaultindex?
This read-only integer identifies, by its prtInputIndex value, which input sub-unit, such as a specific tray, the printer treats as its default source of media, returning -1 if no single default is specified for the printer as a whole. It matters to an admin because print jobs that do not explicitly request a tray will pull from whichever tray this index points to. For example, if prtinputdefaultindex points to the index for tray 2 rather than tray 1, an admin would know unlabeled jobs are drawing from tray 2's loaded stock, not the first tray.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.11.2.3.9.4.2.2.5.1.1.6 snmpwalk -v2c -c public <target> CLJ8500-MIB::prtinputdefaultindex
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.11.2.3.9.4.2.2.5.1.1.6.1 snmpget -v2c -c public <target> CLJ8500-MIB::prtinputdefaultindex.1
Start monitoring HP Color LaserJet 8500 series printer with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CLJ8500-MIB::prtinputdefaultindex OID value, configure state conditions and alerts, and monitor any HP Color LaserJet 8500 series printer from a single console.
OID Breakdown
Upper-level ancestors (6 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.11 | hp | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2 | nm | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2.3 | hpsystem | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2.3.9 | net_peripheral | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2.3.9.4 | netdm | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2.3.9.4.2 | dm | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2.3.9.4.2.2 | printmib | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2.3.9.4.2.2.5 | prtGeneral | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2.3.9.4.2.2.5.1 | prtGeneralTable | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2.3.9.4.2.2.5.1.1 | prtGeneralEntry | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2.3.9.4.2.2.5.1.1.6 | prtinputdefaultindex | CLJ8500-MIB |