All MIBs › CLJ8500-MIB › hrprinterstatus
hrprinterstatus
Module: CLJ8500-MIB
OID (symbolic): CLJ8500-MIB::hrprinterstatus
OID (numeric): 1.3.6.1.4.1.11.2.3.9.4.2.3.3.5.1.1
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-only
Description: The current status of this printer device. When in the idle(1), printing(2), or warmup(3) state, the corresponding hrDeviceStatus should be running(2) or warning(3). When in the unknown state, the corresponding hrDeviceStatus should be unknown(1). Refer to RFC 1514, Host Resources MIB, for more details. Additional information: The printer's condition is mapped as follows: eHother -- The printer is offline or a critical alert is active. eHidle -- The printer is not doing any of the items listed below for eHprinting status. eHprinting -- The printer is processing PJL or PDL data, or processeing a control panel request, or printing images. eHwarmup -- If hrDeviceStatus is eHdown, then the printer is currently offline but is resolving the condition that caused it be offline. It will be online when it is ready to print. If hrDeviceStatus is eHrunning, then the printer was in power save mode and is now becoming ready to print.
What is hrprinterstatus?
This read-only integer reports the printer engine's current activity state, idle, printing, or warming up, as opposed to hrdevicestatus, which reports overall device health rather than activity. It lets a monitoring station tell the difference between a printer that is healthy but simply not currently printing and one that is actively processing a job or still warming up after being powered on. For example, an admin investigating a reported slow response time could check hrprinterstatus and find the printer was in eHwarmup, explaining the delay without indicating any actual fault.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.11.2.3.9.4.2.3.3.5.1.1 snmpwalk -v2c -c public <target> CLJ8500-MIB::hrprinterstatus
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.11.2.3.9.4.2.3.3.5.1.1.1 snmpget -v2c -c public <target> CLJ8500-MIB::hrprinterstatus.1
Start monitoring HP Color LaserJet 8500 series printer with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CLJ8500-MIB::hrprinterstatus OID value, configure state conditions and alerts, and monitor any HP Color LaserJet 8500 series printer from a single console.
OID Breakdown
Upper-level ancestors (6 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.11 | hp | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2 | nm | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2.3 | hpsystem | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2.3.9 | net_peripheral | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2.3.9.4 | netdm | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2.3.9.4.2 | dm | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2.3.9.4.2.3 | hrm | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2.3.9.4.2.3.3 | hrDevice | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2.3.9.4.2.3.3.5 | hrPrinterTable | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2.3.9.4.2.3.3.5.1 | hrPrinterEntry | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2.3.9.4.2.3.3.5.1.1 | hrprinterstatus | CLJ8500-MIB |