All MIBs › CLJ8500-MIB › hrprinterdetectederrorstate
hrprinterdetectederrorstate
Module: CLJ8500-MIB
OID (symbolic): CLJ8500-MIB::hrprinterdetectederrorstate
OID (numeric): 1.3.6.1.4.1.11.2.3.9.4.2.3.3.5.1.2
Node type: OBJECT-TYPE
Type: OCTET STRING
Access: read-only
Description: This object represents any error conditions detected by the printer. The error conditions are encoded as bits in an octet string, with the following definitions: Condition Bit # hrDeviceStatus lowPaper 0 warning(3) noPaper 1 down(5) lowToner 2 warning(3) noToner 3 down(5) doorOpen 4 down(5) jammed 5 down(5) offline 6 down(5) serviceRequested 7 warning(3) If multiple conditions are currently detected and the hrDeviceStatus would not otherwise be unknown(1) or testing(4), the hrDeviceStatus shall correspond to the worst state of those indicated, where down(5) is worse than warning(3) which is worse than running(2). Bits are numbered starting with the most significant bit of the first byte being bit 0, the least significant bit of the first byte being bit 7, the most significant bit of the second byte being bit 8, and so on. A one bit encodes that the condition was detected, while a zero bit encodes that the condition was not detected. This object is useful for alerting an operator to specific warning or error conditions that may occur, especially those requiring human intervention. Refer to RFC 1514, Host Resources MIB, for more details. Additional information: CLJ8500 reports error conditions as follows: lowPaper -- A tray is empty, but the media to be loaded is not currently needed. hrDeviceStatus = eHwarning; hrPrinterStatus = eHidle or eHprinting; a non-critical alert is active. noPaper -- A tray is empty and must be filled for printing to continue. hrDeviceStatus = eHdown; hrPrinterStatus = eHother; a non-critical alert is active. lowToner -- Toner is almost gone. The quality of printed pages will begin to deteriorate until the toner is completely gone. hrDeviceStatus = eHwarning; hrPrinterStatus = eHidle or eHprinting; a non-critical alert is active. noToner -- Toner Low 2 or no cartridge installed. CoverOpen -- A Cover is open. hrDeviceStatus = eHdown; hrPrinterStatus = eHother; a non-critical alert is active. jammed -- A jam condition is preventing printing. hrDeviceStatus = eHdown; hrPrinterStatus = eHother; a critical alert is active. offline -- Printer is offline. hrDeviceStatus = eHdown; hrPrinterStatus = eHother; a critical alert is active. serviceRequested -- Any status or error condition not listed above. If the condition prevents printing, the 'offline' bit is also set and the hrDeviceStatus and hrPrinterStatus listed for offline above are returned. hrDeviceStatus = eHwarning; hrPrinterStatus = eHidle or eHprinting; a non-critical alert is active.
What is hrprinterdetectederrorstate?
This read-only octet string encodes a set of specific detected printer error conditions as individual bits, with defined bits including lowPaper and noPaper, both feeding into a warning or down hrDeviceStatus, as well as lowToner and noToner. It gives a monitoring station fine-grained visibility into exactly which physical condition is causing a printer to report trouble, rather than just a generic warning or down status. For example, an admin who sees hrdevicestatus report eHdown could check hrprinterdetectederrorstate and find the noPaper bit set, immediately knowing the fix is to reload an input tray rather than investigate a toner or mechanical fault.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.11.2.3.9.4.2.3.3.5.1.2 snmpwalk -v2c -c public <target> CLJ8500-MIB::hrprinterdetectederrorstate
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.11.2.3.9.4.2.3.3.5.1.2.1 snmpget -v2c -c public <target> CLJ8500-MIB::hrprinterdetectederrorstate.1
SNMPv3 example:
snmpget -v3 -l authPriv -u snmpv3-user -a SHA -A "AuthPassword1" -x AES -X "PrivPassword1" <target> hrprinterdetectederrorstate.1
Start monitoring HP Color LaserJet 8500 series printer with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CLJ8500-MIB::hrprinterdetectederrorstate OID value, configure state conditions and alerts, and monitor any HP Color LaserJet 8500 series printer from a single console.
OID Breakdown
Upper-level ancestors (6 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.11 | hp | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2 | nm | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2.3 | hpsystem | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2.3.9 | net_peripheral | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2.3.9.4 | netdm | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2.3.9.4.2 | dm | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2.3.9.4.2.3 | hrm | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2.3.9.4.2.3.3 | hrDevice | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2.3.9.4.2.3.3.5 | hrPrinterTable | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2.3.9.4.2.3.3.5.1 | hrPrinterEntry | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2.3.9.4.2.3.3.5.1.2 | hrprinterdetectederrorstate | CLJ8500-MIB |