CISCO-TELEPRESENCE-EXCHANGE-SYSTEM-MIB :: ctxErrorHistoryEventNotifyEnable

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsCISCO-TELEPRESENCE-EXCHANGE-SYSTEM-MIBctxErrorHistoryEventNotifyEnable

ctxErrorHistoryEventNotifyEnable

Module: CISCO-TELEPRESENCE-EXCHANGE-SYSTEM-MIB

OID (symbolic): CISCO-TELEPRESENCE-EXCHANGE-SYSTEM-MIB::ctxErrorHistoryEventNotifyEnable

OID (numeric): 1.3.6.1.4.1.9.9.758.1.5.2.7

Node type: OBJECT-TYPE

Type: TruthValue

Access: read-write

Description: This object specifies if the error event history traps should be enabled or disabled. Setting this to TRUE will enable the notifications. Setting this to FALSE will disable the notifications.

Notifications and other error logs are logged in the error history table. Enabling this may cause duplication for events that are in duplicate of other notifications. This may be the desired behavior of the management system. Use ctxErrorHistoryMaxSeverity to specify the maximum severity level to be logged and sent via a notification.

Sending error history notifications are disabled by default.

This object controls the generation of the following notifications:

ciscoCTXSysErrorHistoryEvent

What is ctxErrorHistoryEventNotifyEnable?

Enables or disables generation of traps for new entries added to the error history table, controlling notification of logged error events.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.9.758.1.5.2.7
snmpwalk -v2c -c public <target> CISCO-TELEPRESENCE-EXCHANGE-SYSTEM-MIB::ctxErrorHistoryEventNotifyEnable

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.9.9.758.1.5.2.7.1
snmpget -v2c -c public <target> CISCO-TELEPRESENCE-EXCHANGE-SYSTEM-MIB::ctxErrorHistoryEventNotifyEnable.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.9.9.758.1.5.2.7.1 s <value>

Start monitoring Cisco TelePresence Exchange System (CTX) platform with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-TELEPRESENCE-EXCHANGE-SYSTEM-MIB::ctxErrorHistoryEventNotifyEnable OID value, configure state conditions and alerts, and monitor any Cisco TelePresence Exchange System (CTX) platform from a single console.

OID Breakdown

Upper-level ancestors (8 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.9ciscoCAT2600-MIB
1.3.6.1.4.1.9.9ciscoMgmtCISCO-SMI
Numeric OIDNameModule
1.3.6.1.4.1.9.9.758ciscoTelepresenceExchangeSystemMIBCISCO-TELEPRESENCE-EXCHANGE-SYSTEM-MIB
1.3.6.1.4.1.9.9.758.1ciscoTelepresenceExchangeSystemMIBObjectsCISCO-TELEPRESENCE-EXCHANGE-SYSTEM-MIB
1.3.6.1.4.1.9.9.758.1.5ctxNotifyObjectsCISCO-TELEPRESENCE-EXCHANGE-SYSTEM-MIB
1.3.6.1.4.1.9.9.758.1.5.2ctxNotifyConfigObjectsCISCO-TELEPRESENCE-EXCHANGE-SYSTEM-MIB
1.3.6.1.4.1.9.9.758.1.5.2.7ctxErrorHistoryEventNotifyEnableCISCO-TELEPRESENCE-EXCHANGE-SYSTEM-MIB